☆ 4.7 Article

Experimental investigation on flow characteristics of vertical and oblique circular impinging jet

PHYSICS OF FLUIDS (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Flow distribution in the liquid film created by a coherent circular water jet impinging obliquely on a plane wall

M. W. L. Chee et al.

Summary: This study investigated the distribution of liquid flow on a vertical wall and found that the angle of impingement affects the flow distribution. The experimental results suggest that detailed numerical calculations are needed for accurate estimation of flow distribution.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2023)

Add to Collection

Article Mechanics

On the non-circular hydraulic jump for an impinging inclined jet

Ahmed Abdelaziz et al.

Summary: In this study, an integral approach is used to analyze the flow field and hydraulic jumps structure of a laminar inclined circular jet impinging on a horizontal surface. The interplay among inertia, gravity, viscosity, and the effective inclination angle on the non-axisymmetric flow is investigated. The presence of the boundary layer near impingement and the azimuthal flow are taken into account in this study.

PHYSICS OF FLUIDS (2022)

Add to Collection

Article Mechanics

Flow characterization in the uphill region of pulsed oblique round jet

Abhishek Mishra et al.

Summary: This study investigates the effect of jet pulsations on the development of a wall jet in the uphill region of an inclined water jet. The results show that pulsations have no significant effect on the free jet region, but influence the development and velocity decay rate of the wall jet. The Reynolds number and jet impingement angle also affect the development and velocity decay of the wall jet.

PHYSICS OF FLUIDS (2022)

Add to Collection

Article Thermodynamics

Quenching of a heated wall with spatial temperature gradient using a liquid film through oblique jet impingement

Noritaka Sako et al.

Summary: This study experimentally investigated the quenching effect of water jet impingement on a heated aluminum alloy plate, and found that the wetting front propagation was influenced by the mass flow rate rather than the liquid jet velocity. The study also estimated the contribution of the injected liquid to cooling, and found that about 90% of the injected liquid splashed away without evaporating.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Effects of jet-to-target spacing on primary and secondary peak heat transfer for an obliquely impinging jet

Prashant Singh

Summary: This paper presents an experimental investigation on the primary and secondary peak heat transfer characteristics of an obliquely (45 degrees) impinging jet on a flat and smooth target surface. The effects of jet Reynolds number (Re) and jet-to-target spacings (z/d) have been studied, and the results reveal the dependence of the primary and secondary peak location and heat transfer level on Re and z/d in oblique jet impingement. The comparison with 90 degrees (orthogonal) jet impingement shows that the primary and secondary peaks are sharper and have higher heat transfer levels in the 45 degrees impingement case.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Engineering, Marine

Experimental investigation of scour of sand beds by submerged circular vertical turbulent jets

Jiaqi Chen et al.

Summary: This study investigated the development of sand bed scour caused by impinging turbulent jets and developed models for predicting the scour effects. The results showed that the scour profiles in the equilibrium state were similar and the scour hole in the jet central region was primarily determined by jet momentum flux. The temporal evolution of the scour hole was found to be logarithmic, and three phases were distinguished.

OCEAN ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Novel Jet Cutter Cartridge for Eliminating Deepwater Stuck Pipe Hazards

Y. -F. Cheng et al.

Summary: A new type of jet cutter cartridge has been designed to eliminate deep water stuck pipe hazards in the drilling industry, with the main structure consisting of a linear shaped charge including hydrogen-based emulsion explosives and copper tubes. Experimental results have shown that the properties of the hydrogen-based emulsion explosive meet the requirement for the environment of the stuck point. This annular jet cutter cartridge has been successfully applied in a copper mine to solve a stuck pipe incident, improving drilling efficiency and reducing costs.

COMBUSTION EXPLOSION AND SHOCK WAVES (2021)

Add to Collection

Article Engineering, Mechanical

Experimental study of flow characteristics of an oblique impinging jet

Abhishek Mishra et al.

EXPERIMENTS IN FLUIDS (2020)

Add to Collection

Article Mechanics

Length scales in turbulent free shear flows

G. Cafiero et al.

JOURNAL OF TURBULENCE (2020)

Add to Collection

Article Mechanics

Turbulence energetics in an axisymmetric impinging jet flow

Chandra Shekhar et al.

PHYSICS OF FLUIDS (2019)

Add to Collection

Article Thermodynamics

Heat transfer distribution on a cylindrical convex surface due to obliquely impinging row of circular jets

Satyanand Abraham et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

The effect of jet pulsation on the flow field of a round impinging jet and the radially expanding wall jet

M. Raizner et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Experimental study of a round jet impinging on a flat surface: Flow field and vortex characteristics in the wall jet

R. van Hout et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2018)

Add to Collection

Article Thermodynamics

Self-similar behavior of turbulent impinging jet based upon outer scaling and dynamics of secondary peak in heat transfer

Harekrishna Yadav et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2018)

Add to Collection

Article Thermodynamics

Experimental investigation on impingement of a submerged circular water jet at varying impinging angles and Reynolds numbers

Chuan Wang et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

Add to Collection

Article Mechanics

Axisymmetric wall jet development in confined jet impingement

Tianqi Guo et al.

PHYSICS OF FLUIDS (2017)

Add to Collection

Article Thermodynamics

Mixing and entrainment characteristics of a pulse jet

Harekrishna Yadav et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2016)

Add to Collection

Article Thermodynamics

Transient temperature field and heat transfer measurement of oblique jet impingement by thermographic phosphor

Seung Jae Yi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Mechanics

Experimental investigation on the mean flow field and impact force of a semi-confined round impinging jet

X. K. Wang et al.

FLUID DYNAMICS RESEARCH (2015)

Add to Collection

Proceedings Paper Automation & Control Systems

Experimental Study on Surface Roughness in Abrasive Water Jet Cutting

Derzija Begic-Hajdarevic et al.

25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014 (2015)

Add to Collection

Article Mechanics

Erosion threshold of a liquid immersed granular bed by an impinging plane liquid jet

Sarah Badr et al.

PHYSICS OF FLUIDS (2014)

Add to Collection

Article Thermodynamics

Investigation for convective heat transfer on grinding work-piece surface subjected to an impinging jet

Jing-Zhou Zhang et al.

APPLIED THERMAL ENGINEERING (2013)

Add to Collection

Article Engineering, Mechanical

Experimental investigation of the wall shear stress and the vortex dynamics in a circular impinging jet

Mouhammad El Hassan et al.

EXPERIMENTS IN FLUIDS (2012)

Add to Collection

Article Thermodynamics

Turbulent flow in the near field of a round impinging jet

Mark J. Tummers et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

Add to Collection

Article Engineering, Mechanical

Flow Structure in the Near-Wall Region of a Submerged Impinging Jet

Khaled J. Hammad et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2011)

Add to Collection

Article Engineering, Aerospace

Flow Measurements in a Short Takeoff, Vertical Landing Fountain: Splayed Jets

A. J. Saddington et al.

JOURNAL OF AIRCRAFT (2009)

Add to Collection

Article Thermodynamics

Analysis of a Synthetic Jet-Based Electronic Cooling Module

Deepak Jagannatha et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2009)

Add to Collection

Article Thermodynamics

A study of the heat transfer characteristics of turbulent round jet impinging on an inclined concave surface using liquid crystal transient method

C. H. Lee et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2007)

Add to Collection

Article Thermodynamics

A brief survey and economical analysis of air cooling for electronic equipments

Akin Burak Etemoglu

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Rapid cooling in continuous annealing and galvanizing lines

M Renard et al.

REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES (2003)

Add to Collection

Article Thermodynamics

On the impingement heat transfer of an oblique free surface plane jet

AY Tong

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)

Add to Collection

Article Engineering, Civil

Erosion of a polystyrene bed by obliquely impinging circular turbulent air jets

N Rajaratnam et al.

JOURNAL OF HYDRAULIC RESEARCH (2002)

Add to Collection

Article Urology & Nephrology

Use of hydro-jet cutting for laparoscopic partial nephrectomy in a porcine model

S Corvin et al.

UROLOGY (2001)

Add to Collection

Article Engineering, Manufacturing

The effect of cutting jet variation on striation formation in abrasive water jet cutting

FL Chen et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.