☆ 4.6 Article

Nonlinear three-dimensional stability characteristics of geometrically imperfect nanoshells under axial compression and surface residual stress

NANOTECHNOLOGY REVIEWS (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Interdisciplinary Applications

A nonlocal strain gradient analysis of laminated composites and sandwich nanoplates using meshfree approach

Chien H. Thai et al.

Summary: This paper proposes a nonlocal strain gradient meshfree plate approach for the bending and free vibration analyses of laminated composite and sandwich nanoplates. The deflection and natural frequency of the plates are significantly influenced by the nonlocal and strain gradient parameters. The results show that both models coincide when the nonlocal and strain gradient parameters are taken as zero.

ENGINEERING WITH COMPUTERS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Nonlinear buckling mode transition analysis in nonlocal couple stress-based stability of FG piezoelectric nanoshells under thermo-electromechanical load

Huazhong Liu et al.

Summary: This research examines the stability characteristics and buckling mode transition phenomenon of piezoelectric nanoshells using unconventional shell and numerical models. The study demonstrates that changing the sign of electric actuation affects the size dependency characteristics, with a more significant impact on the second bifurcation point.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2023)

Add to Collection

Article Physics, Multidisciplinary

Nonlocal couple stress-based quasi-3D nonlinear dynamics of agglomerated CNT-reinforced micro/nano-plates before and after bifurcation phenomenon

Xiao-Guang Yue et al.

Summary: In this study, the nonlinear dynamic stability characteristics of axially compressed nanocomposite plates reinforced with randomly oriented carbon nanotubes (CNTs) at micro/nano-scale were investigated. The nonlocal couple stress (NCS) continuum elasticity was incorporated to a quasi-3D plate theory to consider the transverse shear and normal displacements. A two-parameter homogenization scheme was used to obtain the effective characters of the CNT-reinforced nanocomposites. The NCS-based nonlinear differential equations of motion were discretized using the Kronecker tensor product and the shifted Chebyshev-Gauss-Lobatto gridding pattern. The results showed that the significance of the softening and stiffening characters related to the nonlocal and couple stress tensors increased slightly before the bifurcation phenomenon, but decreased after the critical bifurcation point.

PHYSICA SCRIPTA (2023)

Add to Collection

Article Engineering, Civil

Nonlocal strain gradient-based nonlinear in-plane thermomechanical stability of FG multilayer micro/nano-arches

Zhicheng Yang et al.

Summary: This research investigates the size-dependent nonlinear in-plane stability characteristics of functionally graded multilayer composite micro/nano-arches subjected to uniform radial pressure and temperature changes. The nonlocal strain gradient continuum elasticity and the Halpin-Tsai homogenization scheme are used to study the effects of nonlocal stress tensor and strain gradient size dependency on the behavior of the arches. The results show that these effects have a significant impact on the radial deformation and axial load of the arches.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2023)

Add to Collection

Article Engineering, Civil

Surface stress size dependency in nonlinear thermomechanical in-plane stability characteristics of FG laminated curved nanobeams

Zhicheng Yang et al.

Summary: This study investigates the effect of surface stress type and size dependency on the nonlinear in-plane stability characteristics of curved nanobeams. The results show that the inclusion of surface stress leads to larger values of radial load at the first and second bifurcation points, an increased deflection at the first bifurcation point, and a decreased deflection at the second bifurcation point.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Vibration analysis of a cylindrical shell by using strain gradient theory via a moving Kriging interpolation-based meshfree method

Dongchang Hou et al.

Summary: The strain gradient theory is applied to investigate the vibration characteristics of a thin-walled cylindrical shell. An energy equation involving both in-plane displacements and out-plane deflections is constructed, and a meshfree discretization scheme is adopted. The study shows that the natural frequencies evaluated by strain gradient elasticity theory are lower than those of the classical model, indicating the significant influence of size effect on the vibration of the shell. Furthermore, the mesh-free moving Kriging interpolation method is found to have high precision and stability in dealing with strain gradient cylindrical shells.

THIN-WALLED STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Nonlocal strain gradient-based quasi-3D nonlinear dynamical stability behavior of agglomerated nanocomposite microbeams

Xiao-Guang Yue et al.

Summary: An efficient numerical quasi-3D beam model is introduced to analyze the effect of carbon nanotube (CNT) agglomeration on the nonlinear dynamical stability characteristics of agglomerated beams. It is revealed that the increase in cluster volume fraction reduces the significance of the softening and stiffening effects associated with nonlocal and strain gradient small-scale effects, respectively.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2023)

Add to Collection

Article Mechanics

New insights into the nonlinear stability of nanocomposite cylindrical panels under aero-thermal loads

Hulun Guo et al.

Summary: In this study, the thermal-aerodynamic behaviors of functionally graded graphene nanoplatelets reinforced composite cylindrical panels are theoretically investigated. The established numerical model is verified and the effects of key parameters on the aerothermoelastic responses are comprehensively examined, providing new insights into the stability of graphene platelet reinforced panels under aerodynamic and thermal loadings.

COMPOSITE STRUCTURES (2023)

Add to Collection

Article Mechanics

On vibration of bi-directional functionally graded nanobeams under magnetic field

Abbas Barati et al.

Summary: This article investigates the transverse vibrations of bi-directional functionally graded nanobeams subjected to a longitudinal magnetic field. The nonlocal elasticity theory and the generalized differential quadrature method are used to obtain the equations of motion and boundary conditions, and the effect of different parameters on vibration is studied.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2022)

Add to Collection

Article Mathematics, Applied

Nonlinear size-dependent bending and forced vibration of internal flow-inducing pre- and post-buckled FG nanotubes

Qiduo Jin et al.

Summary: This study investigates the nonlinear bending and forced vibration of fluid-conveying functionally graded nanotubes, using a comprehensive size-dependent nanotube model and advanced analytical techniques to analyze the effects of various factors on nonlinear behaviors.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2022)

Add to Collection

Article Mathematics, Applied

An effective analytical method for buckling solutions of a restrained FGM nonlocal beam

Omer Civalek et al.

Summary: This study investigates the size-dependent stability analysis of a restrained nanobeam with functionally graded material using nonlocal Euler-Bernoulli beam theory and Fourier series. The research highlights the influences of various parameters on the critical buckling load of the functionally graded nonlocal beam and provides an efficient analytical solution for the buckling response of the nanobeam.

COMPUTATIONAL & APPLIED MATHEMATICS (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A modified strain gradient meshfree approach for functionally graded microplates

Chien H. Thai et al.

Summary: A size-dependent moving Kriging meshfree approach is proposed for analyzing bending, free vibration, and buckling of functionally graded microplates. The study uses virtual work principle, mixed rule for material properties, and refined plate theory to determine displacement, natural frequencies, and buckling loads of FG microplates. Results demonstrate that natural frequencies, buckling loads, and displacements of FG microplates are influenced by geometrical parameters, boundary conditions, and length-scale parameters.

ENGINEERING WITH COMPUTERS (2022)

Add to Collection

Article Mechanics

Isogeometric nonlinear oscillations of nonlocal strain gradient PFGM micro/nano-plates via NURBS-based formulation

Fan Fan et al.

Summary: This study investigates the size-dependent analysis of the geometrically nonlinear vibration response of micro/nano-plates made of porous functionally graded material (PFGM) with and without a central cutout, considering nonlocality and strain gradient size dependencies. It is found that the increase in nonlinear frequency due to the strain gradient size effect is greater than the reduction caused by nonlocality. Additionally, there is a specific length to thickness ratio value at which the nonlocal strain gradient frequency ratio becomes minimum, and this value increases with the porosity index of PFGM micro/nano-plates.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

Isogeometric thermal postbuckling analysis of porous FGM quasi-3D nanoplates having cutouts with different shapes based upon surface stress elasticity

Fan Fan et al.

Summary: In this study, a surface elastic-based three-dimensional nonlinear formulation was used to explore the thermal postbuckling characteristics of porous composite nanoplates made of functionally graded materials (FGM). The study found that for higher material gradient indexes, the surface stress size dependency plays a more important role in the thermal postbuckling.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Buckling and postbuckling response of nonlocal strain gradient porous functionally graded micro/nano-plates via NURBS-based isogeometric analysis

Fan Fan et al.

Summary: The study shows that considering geometric nonlinearity and moving to deeper part of the postbuckling regime reduces the significance of both nonlocality and strain gradient size dependencies. Additionally, increasing the material property gradient index results in an enhancement of nonlocal and strain gradient size effects, especially in the deeper part of the postbuckling domain. Moreover, the study demonstrates that the porosity index has a negligible influence on the significance of size dependencies for a PFGM micro/nano-plate, regardless of the boundary conditions.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Dynamic stability of nonlocal strain gradient FGM truncated conical microshells integrated with magnetostrictive facesheets resting on a nonlinear viscoelastic foundation

Yuan Yuan et al.

Summary: The objective of this study is to predict the size-dependent dynamic stability of truncated conical microshells made of functionally graded material integrated with magnetostrictive facesheets. Through numerical simulations, it is found that increasing the material gradient index results in a decrease in nonlocal strain gradient frequency within the prebuckling regime and plays an opposite role within the postbuckling domain.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Elastic buckling and free vibration analysis of functionally graded Timoshenko beam with nonlocal strain gradient integral model

Yuan Tang et al.

Summary: This work investigates the elastic buckling and free vibration response of functionally graded Timoshenko beams using a nonlocal strain gradient integral model. By deriving governing equations and boundary conditions via Hamilton's principle and utilizing Laplace transform technique to solve integral-differential equations, explicit expressions for bending deflections, moments, cross-sectional rotation, and shear force are obtained with eight unknown constants. The nonlinear characteristic equations for determining buckling load and vibration frequency are explicitly derived, and the results are validated against existing literature.

APPLIED MATHEMATICAL MODELLING (2021)

Add to Collection

Article Engineering, Civil

Isogeometric couple stress continuum-based linear and nonlinear flexural responses of functionally graded composite microplates with variable thickness

Zhicheng Yang et al.

Summary: This study investigates the small scale-dependent geometrical nonlinear flexural response of arbitrary-shaped microplates made of functional graded (FG) composites, incorporating modified couple stress continuum elasticity. The results show that the size dependency of couple stress leads to differences in bending responses under different thickness variation patterns.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

Add to Collection

Article Mechanics

Buckling analysis of nanoplates based on a generic third-order plate theory with shear-dependent non-isotropic surface stresses

L. H. Tong et al.

Summary: This paper employs a general third-order shear deformation plate theory to study the buckling behaviors of rectangular nanoplates, establishing a new model with non-isotropic surface effects and obtaining analytical solutions for critical buckling loads. The influence of various factors on the buckling behavior of nanoplates, such as plate thickness, length-to-thickness ratio, surface modulus, residual surface stress, is analyzed in detail using both Reddy's TSDPT and GTSDPT. The presence of shear stresses on the interface between surface layers and the bulk of the plates leads to differences in buckling results between TSDPT and GTSDPT, indicating the need for the latter theory.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Isogeometric small-scale-dependent nonlinear oscillations of quasi-3D FG inhomogeneous arbitrary-shaped microplates with variable thickness

Peizhen Tang et al.

Summary: The study proposes a numerical analysis method for investigating the geometrically nonlinear large-amplitude vibrations of microplates with variable thickness and different shapes in the presence of couple stress type of microstructural size dependency. It is found that by changing the thickness variation pattern, the frequency of the microplates increases and the significance of the couple stress size effect also increases.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Surface stress size dependency in nonlinear free oscillations of FGM quasi-3D nanoplates having arbitrary shapes with variable thickness using IGA

Pengtao Wang et al.

Summary: This study proposes a computational package for analyzing nonlinear vibrations of nanoplates with variable thickness and arbitrary shapes using isogeometric analysis. The size dependent plate model is constructed based on Gurtin-Murdoch surface elasticity, showing that the flexural stiffness of FGM composite nanoplates can be adjusted by changing the thickness variation pattern.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Dynamic instability of trapezoidal composite plates under non-uniform compression using moving kriging based meshfree method

Gaurav Watts et al.

Summary: The meshfree formulation based on the EFGM method along with MK shape function was used to investigate buckling and parametric instability behavior of isotropic and laminated composite trapezoidal plates under non-uniform periodic edge compressive loads. Hamilton's principle was used to derive the governing equations and Bolotin's method was employed to solve the Mathieu-Hill type differential equations for dynamic instability regions. The study also examined the influence of geometric parameters, lamination scheme, boundary conditions, static pre-load, and types of non-uniform edge compression on the critical buckling loads and dynamic instability behavior of the plates.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Physics, Multidisciplinary

Surface elastic-based nonlinear bending analysis of functionally graded nanoplates with variable thickness

Saeid Sahmani et al.

Summary: This investigation analyzed the geometrically nonlinear bending behavior of functionally graded composite irregular shaped nanoplates under the influence of surface elasticity and residual stress. Different thickness variation patterns and surface elastic properties were considered to reveal the flexural characteristics of the nanoplates.

EUROPEAN PHYSICAL JOURNAL PLUS (2021)

Add to Collection

Article Mathematics

Solution of Moore-Gibson-Thompson Equation of an Unbounded Medium with a Cylindrical Hole

Ahmed E. Abouelregal et al.

Summary: This article discusses the equations governing elastic materials through thermodiffusion, using the Moore-Gibson-Thompson and Green-Naghdi Type III models, and applies Laplace transform techniques for analysis. By studying the interaction between temperature and mass diffusion, solutions are obtained and compared with other models.

MATHEMATICS (2021)

Add to Collection

Article Mathematics, Applied

Nonlinear primary resonance analysis of nanoshells including vibrational mode interactions based on the surface elasticity theory

A. Sarafraz et al.

APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION (2020)

Add to Collection

Article Engineering, Multidisciplinary

Free vibration and buckling analyses of magneto-electro-elastic FGM nanoplates based on nonlocal modified higher-order sinusoidal shear deformation theory

Krzysztof Kamil Zur et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

Surface elastic shell model for nonlinear primary resonant dynamics of FG porous nanoshells incorporating modal interactions

S. Sahmani et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Mechanical

Surface stress effect on the nonlinear free vibrations of functionally graded composite nanoshells in the presence of modal interaction

Qiuxiang Li et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Free vibration analysis of functionally graded anisotropic microplates using modified strain gradient theory

Chien H. Thai et al.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2020)

Add to Collection

Article Engineering, Multidisciplinary

A meshfree approach using naturally stabilized nodal integration for multilayer FG GPLRC complicated plate structures

Chien H. Thai et al.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2020)

Add to Collection

Article Mechanics

Snap-buckling of functionally graded multilayer graphene platelet-reinforced composite curved nanobeams with geometrical imperfections

Yang Gao et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2020)

Add to Collection

Article Mechanics

A meshfree method for static and buckling analysis of shear deformable composite laminates considering continuity of interlaminar transverse shearing stresses

A. Zarei et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

Bending, free vibration, and buckling of modified couples stress-based functionally graded porous micro-plates

Jinseok Kim et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Surface effects on the buckling behaviors of piezoelectric cylindrical nanoshells using nonlocal continuum model

Jiabin Sun et al.

APPLIED MATHEMATICAL MODELLING (2018)

Add to Collection

Article Biology

Nonlocal strain gradient beam model for postbuckling and associated vibrational response of lipid supramolecular protein micro/nano-tubules

S. Sahmani et al.

MATHEMATICAL BIOSCIENCES (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An improved moving Kriging meshfree method for plate analysis using a refined plate theory

Chien H. Thai et al.

COMPUTERS & STRUCTURES (2016)

Add to Collection

Article Engineering, Multidisciplinary

An improved Moving Kriging-based meshfree method for static, dynamic and buckling analyses of functionally graded isotropic and sandwich plates

Chien H. Thai et al.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2016)

Add to Collection

Article Engineering, Multidisciplinary

Postbuckling behavior of circular higher-order shear deformable nanoplates including surface energy effects

S. Sahmani et al.

APPLIED MATHEMATICAL MODELLING (2015)

Add to Collection

Article Mechanics

On the free vibration characteristics of postbuckled third-order shear deformable FGM nanobeams including surface effects

S. Sahmani et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Surface effects on the post-buckling of piezoelectric nanowires

Xu Liang et al.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2015)

Add to Collection

Article Mechanics

Surface effects on the nonlinear forced vibration response of third-order shear deformable nanobeams

S. Sahmani et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Engineering, Multidisciplinary

Postbuckling analysis of Timoshenko nanobeams including surface stress effect

R. Ansari et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanics of nanowire buckling on elastomeric substrates with consideration of surface stress effects

Fei Gao et al.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2014)

Add to Collection

Article Physics, Multidisciplinary

Surface effect on free transverse vibrations and dynamic instability of current-carrying nanowires in the presence of a longitudinal magnetic field

Keivan Kiani

PHYSICS LETTERS A (2014)

Add to Collection

Article Engineering, Multidisciplinary

Postbuckling characteristics of nanobeams based on the surface elasticity theory

R. Ansari et al.

COMPOSITES PART B-ENGINEERING (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Surface effect on buckling configuration of nanobeams containing internal flowing fluid: A nonlinear analysis

L. Wang

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2012)

Add to Collection

Article Engineering, Multidisciplinary

Surface stress effects on the free vibration behavior of nanoplates

R. Ansari et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2011)

Add to Collection

Article Engineering, Multidisciplinary

Bending behavior and buckling of nanobeams including surface stress effects corresponding to different beam theories

R. Ansari et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2011)

Add to Collection

Article Materials Science, Composites

The effects of surface elasticity and surface tension on the transverse overall elastic behavior of unidirectional nano-composites

Sofia G. Mogilevskaya et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Influences of the surface energies on the nonlinear static and dynamic behaviors of nanobeams

Yiming Fu et al.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2010)

Add to Collection

Article Materials Science, Composites

Elastic mechanical behavior of nano-scaled FGM films incorporating surface energies

C. F. Lue et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

Add to Collection

Article Mechanics

Transient thermal stresses in a medium with a circular cavity with surface effects

Elizaveta Gordeliy et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)

Add to Collection

Article Materials Science, Composites

Torsional buckling and postbuckling equilibrium path of double-walled carbon nanotubes

Xiaohu Yao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Mechanics

Buckling of imperfect functionally graded cylindrical shells under axial compression

Huaiwei Huang et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Tensile and fatigue strength of ultrathin copper films

G. P. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Materials Science, Multidisciplinary

The stability of a three-layered composite conical shell containing a FGM layer subjected to external pressure

Abdullah Sofiyev et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2008)

Add to Collection

Article Mechanics

Elastic field of an isotropic matrix with a nanoscale elliptical inhomogeneity

L. Tian et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

Add to Collection

Article Mechanics

Analytical solution for size-dependent elastic field of a nanoscale circular inhomogeneity

L. Tian et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2007)

Add to Collection

Article Mechanics

Size-dependent elastic state of ellipsoidal nano-inclusions incorporating surface/interface tension

P. Sharma et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2007)

Add to Collection

Article Engineering, Electrical & Electronic

Atomistic calculation of elastic moduli in strained silicon

R. Zhu et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2006)

Add to Collection

Article Mechanics

Stress concentration around a nano-scale spherical cavity in elastic media: effect of surface stress

ZR Li et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2006)

Add to Collection

Article Materials Science, Composites

The dynamic stability of orthotropic cylindrical shells with non-homogenous material properties under axial compressive load varying as a parabolic function of time

A. H. Sofiyev et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)

Add to Collection

Article Engineering, Mechanical

Size-dependent nonlinear response of thin elastic films with nano-scale thickness

CW Lim et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)

Add to Collection

Article Physics, Applied

Effect of surfaces on the size-dependent elastic state of nano-inhomogeneities

P Sharma et al.

APPLIED PHYSICS LETTERS (2003)

Add to Collection

Article Engineering, Multidisciplinary

Moving kriging interpolation and element-free Galerkin method

L Gu

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2003)

Add to Collection

Article Nanoscience & Nanotechnology

Size-dependent elastic properties of nanosized structural elements

RE Miller et al.

NANOTECHNOLOGY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.