☆ 4.1 Review

Protecting lithium metal anodes in lithium-sulfur batteries: A review

ENERGY MATERIAL ADVANCES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Moisture-assistant chlorinated separator with dual-protective interface for ultralong-life and high-rate lithium metal batteries

Wenbin Zhao et al.

Summary: Metallic lithium is a promising anode with high theoretical capacity and low redox potentials, but faces challenges of dendrite growth and unstable electrolyte interface. Moisture is detrimental to cell degradation, but a chlorinated separator with adsorption of moisture can protect the lithium anode and improve cycle stability. The moisture-assistant chlorinated separator is also applied in energy-dense Li-S batteries to enhance stability and performance.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

An Ion-Dipole-Reinforced Polyether Electrolyte with Ion-Solvation Cages Enabling High-Voltage-Tolerant and Ion-Conductive Solid-State Lithium Metal Batteries

Kun Zhang et al.

Summary: Solid-state electrolytes with enhanced properties play a crucial role in the development of energy-dense solid-state lithium metal batteries. The use of ion-dipole-reinforced poly-3-hydroxymethyl-3-methyloxetane as a novel SSE shows promising results in terms of high voltage tolerance, ion conduction, and mechanical properties when further composited with a polypropylene skeleton.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Failure Mechanism of Lithiophilic Sites in Composite Lithium Metal Anode under Practical Conditions

Ying-Xin Zhan et al.

Summary: The lithiophilic sites in a lithium-friendly host gradually lose their effectiveness during cycling under practical conditions, leading to the accumulation of dead lithium which blocks the diffusion channels of lithium ions. However, after long cycles, the lithiophilic sites can still function properly.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Electro-Chemo-Mechanical Modeling of Artificial Solid Electrolyte Interphase to Enable Uniform Electrodeposition of Lithium Metal Anodes

Yangyang Liu et al.

Summary: This study built an electro-chemo-mechanical model and implemented it in a phase-field modeling to investigate the correlation between the physical properties of artificial solid electrolyte interphase (SEI) and lithium deposition. The results demonstrate that improving the ionic conductivity of the SEI can mitigate stress concentration and nonuniform deposition of lithium. Furthermore, the mechanical strength of the SEI also has an influence on the deposition and electrochemical kinetics of lithium.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Anode Material Options Toward 500 Wh kg-1 Lithium-Sulfur Batteries

Chen-Xi Bi et al.

Summary: This study evaluates the potential and feasibility of using lithium metal or lithium-based alloys as anode materials to construct high-energy-density Li-S batteries, and proposes a quantitative analysis method. Through research on highly lithiated lithium-magnesium (Li-Mg) alloy, it is found that it can achieve high energy density Li-S batteries, providing a new approach to realize long-cycling high-energy-density Li-S batteries.

ADVANCED SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Toward Practical High-Energy-Density Lithium-Sulfur Pouch Cells: A Review

Zi-Xian Chen et al.

Summary: This review provides a comprehensive overview of the development of high-energy-density Li-S pouch cells over the past 7 years and points out further research directions. The key design parameters for achieving actual high energy density are discussed, followed by an analysis of the progress made and the gap towards practical applications. Failure analysis and promotion strategies at the pouch cell level are also discussed. Lastly, the challenges and opportunities of high-performance Li-S pouch cells are presented.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

High-valence sulfur-containing species in solid electrolyte interphase stabilizes lithium metal anodes in lithium-sulfur batteries

Li-Peng Hou et al.

Summary: This study reveals the role of sulfur-containing components in the solid electrolyte interphase (SEI) in stabilizing lithium metal anodes in lithium-sulfur batteries. High-valence sulfur-containing species contribute to the stabilization of lithium metal anodes, while low-valence sulfur-containing species lead to issues with the lithium electrode.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Quantifying the apparent electron transfer number of electrolyte decomposition reactions in anode-free batteries

Ming-Yue Zhou et al.

Summary: Solid electrolyte interphase (SEI) is crucial for the stability of non-aqueous batteries. However, the quantitative understanding of electrolyte decomposition mechanism is limited. In this study, the apparent electron transfer number (ETN) is obtained as a quantitative descriptor in lithium metal batteries, providing insights into the decomposition mechanism of electrolyte components.

JOULE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Weakening the Solvating Power of Solvents to Encapsulate Lithium Polysulfides Enables Long-Cycling Lithium-Sulfur Batteries

Li-Peng Hou et al.

Summary: This study demonstrates the use of an outer-shell solvent, 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (HFE), to construct encapsulating polysulfides electrolytes (EPSE), which effectively suppresses parasitic reactions in lithium-sulfur batteries. The HFE-EPSE significantly improves the cycling lifespan and energy density of the batteries. The findings highlight the importance of solvation chemistry in achieving practical lithium-sulfur batteries.

ADVANCED MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Inhibiting intercrystalline reactions of anode with electrolytes for long-cycling lithium batteries

Peng Shi et al.

Summary: This study investigates the impact of grain boundary on the reactions of lithium metal anodes and proposes a heteroatom-concentrated grain boundary as a strategy to inhibit intercrystalline reactions. The scalable preparation of the grain boundary is demonstrated, leading to a significant improvement in the cycling performance of the lithium battery.

SCIENCE ADVANCES (2022)

Add to Collection

Review Chemistry, Physical

Inhibition of Polysulfide Shuttles in Li-S Batteries: Modified Separators and Solid-State Electrolytes

Shulian Li et al.

Summary: Lithium-sulfur batteries have high theoretical specific capacity, but face challenges such as the polysulfide shuttle effect. To address this issue, researchers have developed functional coatings inhibiting the migration of polysulfides and solid-state electrolytes.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Review on Li Deposition in Working Batteries: From Nucleation to Early Growth

Xiao-Ru Chen et al.

Summary: Lithium metal as a promising alternative anode material for high-energy-density batteries is crucial in the new era of advanced energy storage. Understanding the deposition mechanism from nucleation to early growth is essential for improving battery performance and dendrite-free deposition behavior. Various models have been proposed to enhance the insight into the lithium deposition process, opening up new possibilities for practical lithium metal batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Dan Luo et al.

Summary: A stable multifunctional solid electrolyte interface (SEI) can be constructed by employing electrolyte additives containing catechol and acrylic groups via in-situ anionic polymerization, leading to uniform Li deposition and dendrite-free anode in lithium metal batteries. This strategy offers remarkable cycling performance with high current density, ultra-long cycle life, high cumulative capacity, and stable cycling under high temperature conditions.

NATURE COMMUNICATIONS (2021)

Add to Collection

Review Energy & Fuels

The Insights of Lithium Metal Plating/Stripping in Porous Hosts: Progress and Perspectives

Ying-Xin Zhan et al.

Summary: This paper summarizes the recent progress in studying the behavior of Li plating/stripping in pores based on liquid electrolytes. The impact of pore diameter, depth, and tortuosity on the lifespan of composite Li metal anodes is discussed. The perspectives of rational design of pore structure for composite Li metal anodes are also presented to advance the development of Li metal anodes.

ENERGY TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Delineating the Lithium-Electrolyte Interfacial Chemistry and the Dynamics of Lithium Deposition in Lithium-Sulfur Batteries

Sanjay Nanda et al.

Summary: The study highlights the crucial role of electrolyte components in modulating the chemistry of the lithium-electrolyte interface, impacting the dynamics of lithium deposition and cycling efficiency. Insights into the interplay of various functional groups in the electrolyte salt, the oxidizing effect of lithium nitrate, and the stabilizing effect of polysulfide species provide important information for further development of novel strategies to stabilize the lithium-metal anode in Li-S batteries.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Poor Stability of Li2CO3 in the Solid Electrolyte Interphase of a Lithium-Metal Anode Revealed by Cryo-Electron Microscopy

Bing Han et al.

Summary: The stability of lithium-metal batteries is determined by the solid electrolyte interphase (SEI). Direct atomic imaging of the SEI using cryogenic transmission electron microscopy reveals that lithium carbonate is unstable in the SEI, leading to gas production when reacting with the electrolyte and a dynamically evolving SEI. Sulfur-containing additives preferentially generate Li2SO4 and other substances, limiting SEI thickening and enhancing battery life.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Electrolyte Structure of Lithium Polysulfides with Anti-Reductive Solvent Shells for Practical Lithium-Sulfur Batteries

Xue-Qiang Zhang et al.

Summary: This study reveals the electrolyte structure of PSs with anti-reductive solvent shells, reducing the reactivity between PSs and Li and significantly improving the cycling performance of Li-S batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Appreciating the role of polysulfides in lithium-sulfur batteries and regulation strategies by electrolytes engineering

Jian Tan et al.

Summary: Lithium-sulfur batteries are gaining attention for their high energy density and low cost, with electrolyte engineering playing a key role in improving reaction kinetics. Various strategies for suppressing shuttle effect of Li polysulfides are discussed, along with in-depth analysis of the role of Li polysulfides and electrolyte engineering strategies for Li-S battery systems. The review also delves into the controversy surrounding the dissolution of Li polysulfides and provides insights into characterizing the solvation structure of Li+ ions. Additionally, prospects for electrolyte engineering as future research directions for Li-S batteries are provided.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Challenges and promises of lithium metal anode by soluble polysulfides in practical lithium-sulfur batteries

Li-Peng Hou et al.

Summary: This review systematically analyzes the challenges of the Li metal anode in the presence of LiPSs, and summarizes the preliminary advances in Li metal anode protection to deal with LiPSs. The insight outlook is put forward to promote the development of practical Li-S batteries through a fundamental understanding and practical exploration of the Li metal anode.

MATERIALS TODAY (2021)

Add to Collection

Article Energy & Fuels

Corrosion of lithium metal anodes during calendar ageing and its microscopic origins

David T. Boyle et al.

Summary: Rechargeable lithium metal batteries must have a long cycle life and calendar life. The loss of capacity during calendar ageing is caused by chemical corrosion of Li and the continuous growth of the solid electrolyte interphase. Functional electrolytes must minimize the rate of solid electrolyte interphase growth and the surface area of electrodeposited Li metal to ensure long battery life.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Selective Permeable Lithium-Ion Channels on Lithium Metal for Practical Lithium-Sulfur Pouch Cells

Peng-Yu Chen et al.

Summary: By designing selectively permeable lithium-ion channels on the surface of lithium metal, lithium ions can pass through while polysulfides are effectively blocked, resulting in improved performance and cycle life of lithium-sulfur batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of the defect densities of reduced graphene oxide network on the stability of lithium-metal anodes

Huan Zhang et al.

Summary: Researchers have found through experiments that the 2200 degrees C rGO/Li composite anode exhibits the best electrochemical performance among all experiments, with a symmetrical cell cycling stably for 1200 hours at 1mA cm(-2) with a small polarization voltage of 12mV. Additionally, the 2200 degrees C rGO/Li parallel to S full cell shows stable cycling performance even with a high sulfur loading of 9.4 mg cm(-2), and a high initial areal capacity of 9.7 mA h cm(-2) can be achieved.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Lithium-Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities

Meng Zhao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Prospect of Sulfurized Pyrolyzed Poly(acrylonitrile) (S@pPAN) Cathode Materials for Rechargeable Lithium Batteries

Huijun Yang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Electrolyte Regulation towards Stable Lithium-Metal Anodes in Lithium-Sulfur Batteries with Sulfurized Polyacrylonitrile Cathodes

Wei-Jing Chen et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Materials Science, Multidisciplinary

A Review of Composite Lithium Metal Anode for Practical Applications

Peng Shi et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Constructing a High-Strength Solid Electrolyte Layer by In Vivo Alloying with Aluminum for an Ultrahigh-Rate Lithium Metal Anode

Ziyang Lu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Integrating Conductivity, Immobility, and Catalytic Ability into High-N Carbon/Graphene Sheets as an Effective Sulfur Host

Huifang Xu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Designing Highly Conductive Functional Groups Improving Guest-Host Interactions in Li/S Batteries

Marco Agostini et al.

SMALL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Si and Ge-Based Anode Materials for Li-, Na-, and K-Ion Batteries: A Perspective from Structure to Electrochemical Mechanism

Laura C. Loaiza et al.

SMALL (2020)

Add to Collection

Article Chemistry, Physical

The Failure of Solid Electrolyte Interphase on Li Metal Anode: Structural Uniformity or Mechanical Strength?

Xin Shen et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

New Lithium Salt Forms Interphases Suppressing Both Li Dendrite and Polysulfide Shuttling

Yinglin Xiao et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Diffusion-Reaction Competition Mechanism to Tailor Lithium Deposition for Lithium-Metal Batteries

Xiao-Ru Chen et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochemical Phase Evolution of Metal-Based Pre-Catalysts for High-Rate Polysulfide Conversion

Meng Zhao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

Graphene quantum dots as the nucleation sites and interfacial regulator to suppress lithium dendrites for high-loading lithium-sulfur battery

Yin Hu et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Shielding Polysulfide Intermediates by an Organosulfur-Containing Solid Electrolyte Interphase on the Lithium Anode in Lithium-Sulfur Batteries

Jun-Yu Wei et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Perspective toward Practical Lithium-Sulfur Batteries

Meng Zhao et al.

ACS CENTRAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

3D CoSe@C Aerogel as a Host for Dendrite-Free Lithium-Metal Anode and Efficient Sulfur Cathode in Li-S Full Cells

Jiarui He et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Integrating conductivity and active sites: Fe/Fe3C@GNC as an trapping-catalyst interlayer and dendrite-free lithium host for the lithium-sulfur cell with outstanding rate performance

Mi Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium degradation in lithium-sulfur batteries: insights into inventory depletion and interphasial evolution with cycling

Sanjay Nanda et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Electrode Design with Integration of High Tortuosity and Sulfur-Philicity for High-Performance Lithium-Sulfur Battery

Hao Chen et al.

MATTER (2020)

Add to Collection

Review Chemistry, Physical

Challenges and Key Parameters of Lithium-Sulfur Batteries on Pouch Cell Level

Susanne Doerfler et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

High-Fluorinated Electrolytes for Li-S Batteries

Jing Zheng et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Applied

Porous LiF layer fabricated by a facile chemical method toward dendrite-free lithium metal anode

Yanxia Yuan et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Selection Rule for Hydrofluoroether Electrolyte Cosolvent: Establishing a Linear Free-Energy Relationship in Lithium-Sulfur Batteries

Chi-Cheung Su et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Single Nickel Atoms on Nitrogen-Doped Graphene Enabling Enhanced Kinetics of Lithium-Sulfur Batteries

Linlin Zhang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Quantifying inactive lithium in lithium metal batteries

Chengcheng Fang et al.

NATURE (2019)

Add to Collection

Article Multidisciplinary Sciences

Cathode porosity is a missing key parameter to optimize lithium-sulfur battery energy density

Ning Kang et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Plating/Stripping Behavior of Actual Lithium Metal Anode

He Liu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stepwise Electrocatalysis as a Strategy against Polysulfide Shuttling in Li-S Batteries

Hualin Ye et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fast galvanic lithium corrosion involving a Kirkendall-type mechanism

Dingchang Lin et al.

NATURE CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium-Magnesium Alloy as a Stable Anode for Lithium-Sulfur Battery

Ling-Long Kong et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

A high performance all solid state lithium sulfur battery with lithium thiophosphate solid electrolyte

Patrick Bonnick et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode

Yanxia Yuan et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Lithium-Anode Protection in Lithium-Sulfur Batteries

Chong Yan et al.

TRENDS IN CHEMISTRY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Artificial Interphases for Highly Stable Lithium Metal Anode

Rui Xu et al.

MATTER (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Heterogeneous/Homogeneous Mediators for High-Energy-Density Lithium-Sulfur Batteries: Progress and Prospects

Ze-Wen Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Scalable Approach to Dendrite-Free Lithium Anodes via Spontaneous Reduction of Spray-Coated Graphene Oxide Layers

Maohui Bai et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li-S batteries

Eunho Cha et al.

NATURE NANOTECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Host-Configured Lithium-Sulfur Cell Built on 3D Nickel Photonic Crystal with Superior Electrochemical Performances

Shengxuan Lin et al.

SMALL (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Silicon-Based Anodes for Lithium-Ion Batteries: From Fundamentals to Practical Applications

Kun Feng et al.

SMALL (2018)

Add to Collection

Article Multidisciplinary Sciences

Caging tin oxide in three-dimensional graphene networks for superior volumetric lithium storage

Junwei Han et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Assessment on the Self-Discharge Behavior of Lithium-Sulfur Batteries with LiNO3-Possessing Electrolytes

Minglin Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

The Relationship between the Relative Solvating Power of Electrolytes and Shuttling Effect of Lithium Polysulfides in Lithium-Sulfur Batteries

Chi-Cheung Su et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage

Turgut M. Gur

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Energy & Fuels

Tuning the electrolyte network structure to invoke quasi-solid state sulfur conversion and suppress lithium dendrite formation in Li-S batteries

Quan Pang et al.

NATURE ENERGY (2018)

Add to Collection

Article Multidisciplinary Sciences

Flexible and stable high-energy lithium-sulfur full batteries with only 100% oversized lithium

Jian Chang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

2D Materials for Lithium/Sodium Metal Anodes

Chanyuan Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Coralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries

Rui Zhang et al.

JOULE (2018)

Add to Collection

Article Chemistry, Physical

Electrolyte with Low Polysulfide Solubility for Li-S Batteries

Ke Sun et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Bending-Tolerant Anodes for Lithium-Metal Batteries

Aoxuan Wang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Novel and Generalized Lithium-Ion-Battery Configuration utilizing Al Foil as Both Anode and Current Collector for Enhanced Energy Density

Bifa Ji et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Twinborn TiO2-TiN heterostructures enabling smooth trapping-diffusion-conversion of polysulfides towards ultralong life lithium-sulfur batteries

Tianhong Zhou et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability

Jie Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Review Electrochemistry

Review-SEI: Past, Present and Future

E. Peled et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Conformal Lithium Fluoride Protection Layer on Three-Dimensional Lithium by Nonhazardous Gaseous Reagent Freon

Dingchang Lin et al.

NANO LETTERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes

Jie Zhao et al.

NATURE NANOTECHNOLOGY (2017)

Add to Collection

Article Multidisciplinary Sciences

Atomic structure of sensitive battery materials and Interfaces revealed by cryo-electron microscopy

Yuzhang Li et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

\Suppressing Self-Discharge and Shuttle Effect of Lithium-Sulfur Batteries with V2O5-Decorated Carbon Nanofiber Interlayer

Ming Liu et al.

SMALL (2017)

Add to Collection

Article Multidisciplinary Sciences

Organosulfide-plasticized solid-electrolyte interphase layer enables stable lithium metal anodes for long-cycle lithium-sulfur batteries

Guoxing Li et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

Regulating Li deposition at artificial solid electrolyte interphases

Lei Fan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Directing the Lithium-Sulfur Reaction Pathway via Sparingly Solvating Electrolytes for High Energy Density Batteries

Chang-Wook Lee et al.

ACS CENTRAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

An Analogous Periodic Law for Strong Anchoring of Polysulfides on Polar Hosts in Lithium Sulfur Batteries: S- or Li-Binding on First-Row Transition-Metal Sulfides?

Xiang Chen et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries

Xin-Bing Cheng et al.

CHEM (2017)

Add to Collection

Article Chemistry, Physical

The gap between long lifespan Li-S coin and pouch cells: The importance of lithium metal anode protection

Xin-Bing Cheng et al.

ENERGY STORAGE MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Fluorinated Ether Based Electrolyte for High-Energy Lithium-Sulfur Batteries: Li+ Solvation Role Behind Reduced Polysulfide Solubility

Sara Drvaric Talian et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review

Xin-Bing Cheng et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Chemistry, Physical

In Situ Chemical Imaging of Solid-Electrolyte Interphase Layer Evolution in Li-S Batteries

Manjula I. Nandasiri et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices

Masayoshi Watanabe et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Xue-Qiang Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Tuning Transition Metal Oxide-Sulfur Interactions for Long Life Lithium Sulfur Batteries: The Goldilocks Principle

Xiao Liang et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Extremely Accessible Potassium Nitrate (KNO3) as the Highly Efficient Electrolyte Additive in Lithium Battery

Weishang Jia et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Covalently Connected Carbon Nanostructures for Current Collectors in Both the Cathode and Anode of Li-S Batteries

Song Jin et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Transition of lithium growth mechanisms in liquid electrolytes

Peng Bai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Powering Lithium-Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts

Zhe Yuan et al.

NANO LETTERS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Design Principles for Heteroatom-Doped Nanocarbon to Achieve Strong Anchoring of Polysulfides for Lithium-Sulfur Batteries

Ting-Zheng Hou et al.

SMALL (2016)

Add to Collection

Article Chemistry, Physical

Polysulfide-Shuttle Control in Lithium-Sulfur Batteries with a Chemically/Electrochemically Compatible NaSICON-Type Solid Electrolyte

Xingwen Yu et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

A High Energy Lithium-Sulfur Battery with Ultrahigh-Loading Lithium Polysulfide Cathode and its Failure Mechanism

Long Qie et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

The Li-S battery: an investigation of redox shuttle and self-discharge behaviour with LiNO3-containing electrolytes

Matthew J. Lacey et al.

RSC ADVANCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Dendrites and Pits: Untangling the Complex Behavior of Lithium Metal Anodes through Operando Video Microscopy

Kevin N. Wood et al.

ACS CENTRAL SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

A Scaled-Up Lithium (Ion)-Sulfur Battery: Newly Faced Problems and Solutions

Hyo-Seok Kang et al.

ADVANCED MATERIALS TECHNOLOGIES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Understanding the Effect of a Fluorinated Ether on the Performance of Lithium-Sulfur Batteries

Nasim Azimi et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Permselective Graphene Oxide Membrane for Highly Stable and Anti-Self-Discharge Lithium-Sulfur Batteries

Jia-Qi Huang et al.

ACS NANO (2015)

Add to Collection

Article Multidisciplinary Sciences

A highly efficient polysulfide mediator for lithium-sulfur batteries

Xiao Liang et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Multidisciplinary Sciences

The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth

Weiyang Li et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Physical

High Energy Density Lithium-Sulfur Batteries: Challenges of Thick Sulfur Cathodes

Dongping Lv et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Multidisciplinary Sciences

Single step transformation of sulphur to Li2S2/Li2S in Li-S batteries

M. Helen et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Article Multidisciplinary Sciences

Electrocatalysis of Lithium Polysulfides: Current Collectors as Electrodes in Li/S Battery Configuration

Ganguli Babu et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Sulfur-Based Composite Cathode Materials for High-Energy Rechargeable Lithium Batteries

Jiulin Wang et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Electrochemistry

Direct Measurement of Polysulfide Shuttle Current: A Window into Understanding the Performance of Lithium-Sulfur Cells

Derek Moy et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Physical

Failure Mechanism for Fast-Charged Lithium Metal Batteries with Liquid Electrolytes

Dongping Lu et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Multidisciplinary Sciences

Lithium Sulfur Primary Battery with Super High Energy Density: Based on the Cauliflower-like Structured C/S Cathode

Yiwen Ma et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Article Chemistry, Physical

Multi-functional separator/interlayer system for high-stable lithium-sulfur batteries: Progress and prospects

Jia-Qi Huang et al.

ENERGY STORAGE MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium- Sulfur Batteries

Hong-Jie Peng et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Bifunctional Separator with a Light-Weight Carbon-Coating for Dynamically and Statically Stable Lithium-Sulfur Batteries

Sheng-Heng Chung et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Add to Collection

Article Chemistry, Physical

V2O5 Polysulfide Anion Barrier for Long-Lived Li-S Batteries

Wen Li et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Unique behaviour of nonsolvents for polysulphides in lithium-sulphur batteries

M. Cuisinier et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Studies on preventing Li dendrite formation in Li-S batteries by using pre-lithiated Si microwire anodes

M. Hagen et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Cell energy density and electrolyte/sulfur ratio in Li-S cells

M. Hagen et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Electrochemistry

The Origin of Stress in the Solid Electrolyte Interphase on Carbon Electrodes for Li Ion Batteries

A. Tokranov et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Criteria for solvate ionic liquids

Toshihiko Mandai et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Article Multidisciplinary Sciences

Manipulating surface reactions in lithium-sulphur batteries using hybrid anode structures

Cheng Huang et al.

NATURE COMMUNICATIONS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Distinct Solid-Electrolyte-Interphases on Sn (100) and (001) Electrodes Studied by Soft X-Ray Spectroscopy

Ruimin Qiao et al.

ADVANCED MATERIALS INTERFACES (2014)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Formed Lithium Sulfide/Microporous Carbon Cathodes for Lithium-Ion Batteries

Shiyou Zheng et al.

ACS NANO (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Polysulfide dissolution control: the common ion effect

Eon Sung Shin et al.

CHEMICAL COMMUNICATIONS (2013)

Add to Collection

Article Chemistry, Physical

Solvent Effect of Room Temperature Ionic Liquids on Electrochemical Reactions in Lithium-Sulfur Batteries

Jun-Woo Park et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Add to Collection

Article Chemistry, Physical

Ionic Liquid Electrolytes for Lithium-Sulfur Batteries

Jun-Woo Park et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Add to Collection

Article Chemistry, Physical

Anionic Effects on Solvate Ionic Liquid Electrolytes in Rechargeable Lithium-Sulfur Batteries

Kazuhide Ueno et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Add to Collection

Article Chemistry, Physical

Sulfur Speciation in Li-S Batteries Determined by Operando X-ray Absorption Spectroscopy

Marine Cuisinier et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism

Fei Ding et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

Electrochemical Charge/Discharge Behavior and Phase Transitions during Cell Cycling of Li(Mg) Alloy Anodes for High Capacity Li Ion Batteries

M. Jagannathan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

Solvate Ionic Liquid Electrolyte for Li-S Batteries

Kaoru Dokko et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Multidisciplinary Sciences

A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries

Liumin Suo et al.

NATURE COMMUNICATIONS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochemical performance of lithium/sulfur batteries using perfluorinated ionomer electrolyte with lithium sulfonyl dicyanomethide functional groups as functional separator

Zhaoqing Jin et al.

RSC ADVANCES (2013)

Add to Collection

Article Electrochemistry

Li-B Alloy as Anode Material for Lithium/Sulfur Battery

Bochao Duan et al.

ECS ELECTROCHEMISTRY LETTERS (2013)

Add to Collection

Article Chemistry, Physical

Carbyne polysulfide as a novel cathode material for lithium/sulfur batteries

Bochao Duan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene/Single-Walled Carbon Nanotube Hybrids: One-Step Catalytic Growth and Applications for High-Rate Li-S Batteries

Meng-Qiang Zhao et al.

ACS NANO (2012)

Add to Collection

Article Chemistry, Analytical

Lithium/Sulfur Cell Discharge Mechanism: An Original Approach for Intermediate Species Identification

Celine Barchasz et al.

ANALYTICAL CHEMISTRY (2012)

Add to Collection

Article Electrochemistry

Role of LiNO3 in rechargeable lithium/sulfur battery

Sheng S. Zhang

ELECTROCHIMICA ACTA (2012)

Add to Collection

Article Chemistry, Physical

Application of lithiated Nafion ionomer film as functional separator for lithium sulfur cells

Zhaoqing Jin et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Smaller Sulfur Molecules Promise Better Lithium-Sulfur Batteries

Sen Xin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Add to Collection

Article Electrochemistry

Effect of Discharge Cutoff Voltage on Reversibility of Lithium/Sulfur Batteries with LiNO3-Contained Electrolyte

Sheng S. Zhang

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection

Review Chemistry, Physical

Li-O2 and Li-S batteries with high energy storage

Peter G. Bruce et al.

NATURE MATERIALS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Prelithiated Silicon Nanowires as an Anode for Lithium Ion Batteries

Nian Liu et al.

ACS NANO (2011)

Add to Collection

Review Chemistry, Physical

A review of advanced and practical lithium battery materials

Rotem Marom et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection

Review Chemistry, Physical

A review of the electrochemical performance of alloy anodes for lithium-ion batteries

Wei-Jun Zhang

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Oxidative-Stability Enhancement and Charge Transport Mechanism in Glyme-Lithium Salt Equimolar Complexes

Kazuki Yoshida et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical characterization of LiPON films using nanoindentation

E. G. Herbert et al.

THIN SOLID FILMS (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Li-alloy based anode materials for Li secondary batteries

Cheol-Min Park et al.

CHEMICAL SOCIETY REVIEWS (2010)

Add to Collection

Article Chemistry, Physical

A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries

Xiulei Ji et al.

NATURE MATERIALS (2009)

Add to Collection

Article Electrochemistry

Polysulfide shuttle study in the Li/S battery system

YV Mikhaylik et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection

Article Chemistry, Physical

Electrochemical performance of lithium/sulfur batteries with protected Li anodes

YM Lee et al.

JOURNAL OF POWER SOURCES (2003)

Add to Collection

Article Electrochemistry

Sulfur-carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte

JL Wang et al.

ELECTROCHEMISTRY COMMUNICATIONS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.