☆ 4.6 Article

Multifunctional pseudohalide-based ionic liquid doping promotes efficient and stable perovskite solar cells

JOURNAL OF MATERIALS CHEMISTRY C (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Synergistic Effect of Surface p-Doping and Passivation Improves the Efficiency, Stability, and Reduces Lead Leakage in All-Inorganic CsPbIBr2-Based Perovskite Solar Cells

Jian He et al.

Summary: Researchers have successfully achieved surface p-type doping for CsPbIBr2-based perovskite solar cells using 1,5-Diaminopentane dihydroiodide, improving the hole extraction efficiency and reducing energy losses. They have also filled the Cs- and Br-vacancies at the interface, thereby improving the quality of the perovskite film. As a result, the target device achieved a high efficiency of 11.02% with improved stability.

SMALL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

PF6- Pseudohalides Anion Based Metal-Free Perovskite Single Crystal for Stable X-Ray Detector to Attain Record Sensitivity

Zhizai Li et al.

Summary: Metal-free perovskites (MFPs) with excellent photophysical properties have been expanded to X-ray detection, but iodine-based MFPs suffer from material stability and device performance issues. This study proposes using PF6- pseudohalides to fabricate large-size MDABCO-NH4(PF6)(3) single crystals (SCs) to solve the problems related to iodine ions. The introduction of PF6- pseudohalides enhances Coulomb interaction and hydrogen bonding, alleviating ion migration and improving stability. The X-ray detector based on MDABCO-NH4(PF6)(3) SCs achieves high sensitivity and low detectable dose rate, expanding the selection of MFPs for X-ray detectors.

ADVANCED MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic Liquid Treatment for Highest-Efficiency Ambient Printed Stable All-Inorganic CsPbI3 Perovskite Solar Cells

Yachao Du et al.

Summary: The incorporation of a low concentration of a novel ionic liquid successfully improves the defects, energy alignment at the interface, and stability of CsPbI3 perovskite solar cells fabricated via ambient blade-coating. The cells achieve high power conversion efficiency and impressive long-term ambient stability.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Surface reconstruction strategy improves the all-inorganic CsPbIBr2 based perovskite solar cells and photodetectors performance

Jian He et al.

Summary: Researchers have successfully improved the efficiency and stability of inorganic cesium lead halide optoelectronic devices and reduced energy loss through surface reconstruction.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

F-Type Pseudo-Halide Anions for High-Efficiency and Stable Wide-Band-Gap Inverted Perovskite Solar Cells with Fill Factor Exceeding 84%

Junlei Tao et al.

Summary: The use of F-type pseudo-halogen additives in wide-band-gap perovskite films improves grain size, crystal quality, and reduces defect density. The substitution of F-type pseudo-halogen anions for I-/Br- releases stress distortion and effectively suppresses carrier recombination, reduces charge transfer loss, and inhibits phase separation. These findings enhance the power conversion efficiency and stability of wide-band-gap perovskite solar cells.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

KBF4 Additive for Alleviating Microstrain, Improving Crystallinity, and Passivating Defects in Inverted Perovskite Solar Cells

Haiyang Cheng et al.

Summary: In this study, KBF4 was introduced as an additive to improve the quality of triple-cation mixed perovskite thin films. It was found that KBF4 can enhance the crystallinity and alleviate microstrain of the films. Additionally, KBF4 can passivate defects in the perovskite grains, leading to longer carrier lifetimes. As a result, the devices showed improved fill factor, enhanced efficiency, and better stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic Liquid Stabilized Perovskite Solar Modules with Power Conversion Efficiency Exceeding 20%

Yulong Wang et al.

Summary: Improving the quality of large-area perovskite film using ionic liquid additives and a new bond formation has shown significant improvements in the power conversion efficiency of the devices, making them more stable for extended periods of time.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Interfacial defect passivation by novel phosphonium salts yields 22% efficiency perovskite solar cells: Experimental and theoretical evidence

Dongmei He et al.

Summary: By modifying the perovskite/Spiro-OMeTAD interface with two novel phosphonium salts, the defect density is reduced and carrier lifetimes are prolonged, leading to improved power conversion efficiency in solar cells.

ECOMAT (2022)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells with Imidazolium-Based Ionic Liquid for Surface Passivation and Charge Transport

Xuejie Zhu et al.

Summary: In this study, DMIMPF6 ionic liquid was used to passivate surface defects of perovskite, resulting in increased solar cell efficiency and enhanced long-term stability of the device.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Engineering, Environmental

Reducing the interfacial energy loss via oxide/perovskite heterojunction engineering for high efficient and stable perovskite solar cells

Xing Guo et al.

Summary: This study demonstrates a metal oxide/perovskite heterojunction engineering approach using LiF-doped SnO2 at the interface, which can modulate lattice constants, reduce lattice mismatch, and enhance charge transfer, resulting in improved efficiency and stability of perovskite solar cells.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Enhanced efficiency and stability of planar perovskite solar cells using SnO2:InCl3 electron transport layer through synergetic doping and passivation approaches

Xing Guo et al.

Summary: Research has shown that doping and interface passivation using SnO2:InCl3 ETL in perovskite solar cells can significantly increase the photovoltaic conversion efficiency, while also expanding the research direction of interface optimization.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Synergetic surface charge transfer doping and passivation toward high efficient and stable perovskite solar cells

Xing Guo et al.

Summary: The use of a novel extended benzopenta-fulvalenes compound FDC-2-5Cl for treating the surface of perovskite has led to high power conversion efficiency and long-term stability in solar cells.

ISCIENCE (2021)

Add to Collection

Review Engineering, Environmental

The benefits of ionic liquids for the fabrication of efficient and stable perovskite photovoltaics

Md. Shahiduzzaman et al.

Summary: This article discusses how to use ionic liquids (ILs) as additives and solvents to improve the efficiency and stability of perovskite solar cells (PSCs). By slowly crystallizing in ILs to prepare high-quality perovskite films, efficient and stable PSCs can be obtained.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Chemistry, Physical

Ionic Liquids-Enabled Efficient and Stable Perovskite Photovoltaics: Progress and Challenges

Tingting Niu et al.

Summary: Perovskite solar cells (PSCs) benefit greatly from the use of ionic liquids (ILs), which play versatile roles in improving efficiency and stability. ILs help control film formation dynamics, chemically passivate surfaces, enhance stability, and provide innovative alternatives to traditional materials in PSCs. Advanced progress in ILs-based perovskite photovoltaics highlights the importance of ILs in achieving high-performing PSCs.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Applied

Secondary crystallization strategy for highly efficient inorganic CsPbI2Br perovskite solar cells with efficiency approaching 17%

Jing Ma et al.

Summary: The utilization of secondary crystallization strategy has improved the performance and stability of CsPbI2Br perovskite solar cells in a facile n-i-p structure, achieving a high open-circuit voltage and power conversion efficiency.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic Liquid for Perovskite Solar Cells: An Emerging Solvent Engineering Technology

Lingfeng Chao et al.

Summary: Perovskite solar cells (PSCs) have shown comparable performance to traditional photovoltaic technologies and can be prepared using a solution method, which simplifies the film preparation process and reduces costs. However, the commonly used organic solvents present safety and environmental issues, limiting the large-scale production and stability of PSCs.

ACCOUNTS OF MATERIALS RESEARCH (2021)

Add to Collection

Review Chemistry, Physical

Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells

Feng Gao et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

FAPbI3-Based Perovskite Solar Cells Employing Hexyl-Based Ionic Liquid with an Efficiency Over 20% and Excellent Long-Term Stability

Seckin Akin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

NiO/Perovskite Heterojunction Contact Engineering for Highly Efficient and Stable Perovskite Solar Cells

Bingjuan Zhang et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

Yen-Hung Lin et al.

SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Defect suppression and passivation for perovskite solar cells: from the birth to the lifetime operation

Rundong Fan et al.

ENERGYCHEM (2020)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Energy & Fuels

Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells

Nengxu Li et al.

NATURE ENERGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Planar perovskite solar cells with long-term stability using ionic liquid additives

Sai Bai et al.

NATURE (2019)

Add to Collection

Article Chemistry, Physical

Interface engineering of low temperature processed all-inorganic CsPbI2Br perovskite solar cells toward PCE exceeding 14%

Long Zhou et al.

NANO ENERGY (2019)

Add to Collection

Article Multidisciplinary Sciences

A Eu3+-Eu2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells

Ligang Wang et al.

SCIENCE (2019)

Add to Collection

Article Energy & Fuels

Highly Efficient and Stable Planar Perovskite Solar Cells with Modulated Diffusion Passivation Toward High Power Conversion Efficiency and Ultrahigh Fill Factor

Long Zhou et al.

SOLAR RRL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced planar perovskite solar cell efficiency and stability using a perovskite/PCBM heterojunction formed in one step

Long Zhou et al.

NANOSCALE (2018)

Add to Collection

Article Chemistry, Physical

Interface Modification by Ionic Liquid: A Promising Candidate for Indoor Light Harvesting and Stability Improvement of Planar Perovskite Solar Cells

Meng Li et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

High-Performance Planar Perovskite Solar Cells Using Low Temperature, Solution-Combustion-Based Nickel Oxide Hole Transporting Layer with Efficiency Exceeding 20%

Ziye Liu et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells

Woon Seok Yang et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Iodine Migration and its Effect on Hysteresis in Perovskite Solar Cells

Cheng Li et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Energy & Fuels

Tabulated values of the Shockley-Queisser limit for single junction solar cells

Sven Ruhle

SOLAR ENERGY (2016)

Add to Collection

Article Energy & Fuels

Functionalization of perovskite thin films with moisture-tolerant molecules

Shuang Yang et al.

NATURE ENERGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals

Qingfeng Dong et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Chemical Management for Colorful, Efficient, and Stable Inorganic-Organic Hybrid Nanostructured Solar Cells

Jun Hong Noh et al.

NANO LETTERS (2013)

Add to Collection

Article Multidisciplinary Sciences

Sequential deposition as a route to high-performance perovskite-sensitized solar cells

Julian Burschka et al.

NATURE (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.