4.7 Article

Multiobjective Optimization-Based Terrestrial Laser Scanning Layout Planning for Landslide Monitoring

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Multi-objective optimization of natural surveillance and privacy in early design stages utilizing NSGA-II

Hanie Rahimbakhsh et al.

Summary: This paper proposes a method to address the trade-off between privacy and surveillance in the design of residential complexes by combining 3D Isovists and Multi-Objective Optimization algorithms. This method automates the design process and analyzes solutions mathematically and graphically.

AUTOMATION IN CONSTRUCTION (2022)

Article Construction & Building Technology

3D model-based terrestrial laser scanning (TLS) observation network planning for large-scale building facades

Zhiping Chen et al.

Summary: This paper proposes a 3D model-based TLS observation network planning method for large-scale building facades. It quickly obtains a simple 3D model through low-cost unmanned aerial vehicle (UAV) photogrammetry, performs fast scanning simulation of TLS candidate scan positions, and generates the TLS network using a weighted greedy algorithm and a registration assessment method. Experimental results demonstrate the efficiency of the planned TLS network in various complex scenes and its superiority in terms of reliability compared to the 2D model-based method.

AUTOMATION IN CONSTRUCTION (2022)

Article Engineering, Geological

Remote thermal detection of exfoliation sheet deformation

Antoine Guerin et al.

Summary: Research suggests that rock slope failures, particularly from exfoliating cliffs, are promoted by rock deformations induced by daily temperature cycles. Integrated terrestrial laser scanning and infrared thermography techniques can effectively monitor and identify thermally induced deformations of rock sheets, offering a new and efficient approach for investigating potential rockfall sources on exfoliating cliffs.

LANDSLIDES (2021)

Article Construction & Building Technology

Scan planning for existing buildings without BIM based on user-defined data quality requirements and genetic algorithm

Qi Qiu et al.

Summary: The study aims to develop a scan planning method for existing buildings without BIM, utilizing pre-scanning and genetic algorithm to optimize scan positions and parameters based on user-defined data quality requirements, resulting in higher time efficiency, data completeness, and lower redundancy compared to manual methods.

AUTOMATION IN CONSTRUCTION (2021)

Article Geography, Physical

Optimal scan planning with enforced network connectivity for the acquisition of three-dimensional indoor models

Youness Dehbi et al.

Summary: The article proposes an optimization approach for indoor surveying with minimal sensor view point positions, utilizing Integer Linear Program to calculate optimal solutions. The method outperforms heuristic approaches in terms of running time and TLS stations, as demonstrated in evaluations on real-world objects.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2021)

Review Construction & Building Technology

Planning for terrestrial laser scanning in construction: A review

Afrooz Aryan et al.

Summary: Terrestrial Laser Scanning (TLS) is an efficient method for collecting point clouds with various applications in the AEC domain. Ensuring data quality and time efficiency in data collection is crucial, which can be achieved through prior planning optimization process known as Planning for Scanning (P4S). Past research has focused on categorizing point cloud data quality criteria and addressing the optimization problem in P4S by considering inputs, constraints, and algorithms utilized.

AUTOMATION IN CONSTRUCTION (2021)

Article Geochemistry & Geophysics

An Iterative-Mode Scan Design of Terrestrial Laser Scanning in Forests for Minimizing Occlusion Effects

Linyuan Li et al.

Summary: The study proposed an iterative-mode scan design to minimize the occlusion effect in terrestrial laser scanning. The iterative-mode design can improve scan completeness of trees, reduce errors in tree attribute estimation, especially for dense stands.

IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING (2021)

Article Engineering, Civil

Multiobjective Optimization of Sensor Placement for Precipitation Station Monitoring Network Design

Ke Wang et al.

JOURNAL OF HYDROLOGIC ENGINEERING (2020)

Article Environmental Sciences

A Model-Based Design System for Terrestrial Laser Scanning Networks in Complex Sites

Fengman Jia et al.

REMOTE SENSING (2019)

Article Computer Science, Artificial Intelligence

A hybrid multi-objective firefly algorithm for big data optimization

Hui Wang et al.

APPLIED SOFT COMPUTING (2018)

Article Construction & Building Technology

Proactive 2D model-based scan planning for existing buildings

Meida Chen et al.

AUTOMATION IN CONSTRUCTION (2018)

Article Geochemistry & Geophysics

Determination of Minimum Detectable Deformation of Terrestrial Laser Scanning Based on Error Entropy Model

Xijiang Chen et al.

IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING (2018)

Article Computer Science, Artificial Intelligence

A modified ant colony optimization algorithm for multi-objective assembly line balancing

Yu-guang Zhong et al.

SOFT COMPUTING (2017)

Article Geography, Physical

An intensity-based stochastic model for terrestrial laser scanners

D. Wujanz et al.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2017)

Article Computer Science, Artificial Intelligence

MOVPSO: Vortex Multi-Objective Particle Swarm Optimization

Joaquin Meza et al.

APPLIED SOFT COMPUTING (2017)

Article Engineering, Geological

An integrated methodology for landslides' early warning systems

M. Barla et al.

LANDSLIDES (2016)

Article Computer Science, Information Systems

Interactive scan planning for heritage recording

Jaehong Ahn et al.

MULTIMEDIA TOOLS AND APPLICATIONS (2016)

Article Geography, Physical

Two-step adaptive extraction method for ground points and breaklines from lidar point clouds

Bisheng Yang et al.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2016)

Article Engineering, Geological

Monitoring landslide displacements with the Geocube wireless network of low-cost GPS

L. Benoit et al.

ENGINEERING GEOLOGY (2015)

Article Computer Science, Artificial Intelligence

An Evolutionary Many-Objective Optimization Algorithm Using Reference-Point-Based Nondominated Sorting Approach, Part I: Solving Problems With Box Constraints

Kalyanmoy Deb et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2014)

Article Geography, Physical

Scanning geometry: Influencing factor on the quality of terrestrial laser scanning points

Sylvie Soudarissanane et al.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2011)

Article Geosciences, Multidisciplinary

Detection of millimetric deformation using a terrestrial laser scanner: experiment and application to a rockfall event

A. Abellan et al.

NATURAL HAZARDS AND EARTH SYSTEM SCIENCES (2009)

Article Computer Science, Artificial Intelligence

Pareto multi-criteria decision making

Donald E. Grierson

ADVANCED ENGINEERING INFORMATICS (2008)

Article Computer Science, Theory & Methods

View planning for automated three-dimensional object reconstruction and inspection

WR Scott et al.

ACM COMPUTING SURVEYS (2003)

Article Computer Science, Artificial Intelligence

A fast and elitist multiobjective genetic algorithm: NSGA-II

K Deb et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2002)