4.6 Article

Trap engineering using oxygen-doped graphitic carbon nitride for high-performance perovskite solar cells

Related references

Note: Only part of the references are listed.
Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

Article Materials Science, Multidisciplinary

A facile strategy to adjust SnO2/perovskite interfacial properties for high-efficiency perovskite solar cells

Junlei Tao et al.

Summary: EOAI is utilized to regulate the interface properties at the SnO2/perovskite interface, improving defects and crystallinity. The introduction of EOAI significantly enhances the performance of PSCs, achieving high power conversion efficiency.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Article Chemistry, Applied

Self-assembled synthesis of oxygen-doped g-C3N4 nanotubes in enhancement of visible-light photocatalytic hydrogen

Yizeng Zhang et al.

Summary: By rational oxygen doping, the band structure of g-C3N4 is improved, narrowing the band gap and reducing the recombination rate of photogenerated carriers. Additionally, the hollow nanotube structure of OCN provides multiple diffuse reflection during photocatalytic reaction, significantly enhancing the utilization capacity of visible light and improving the photocatalytic water splitting performance.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Self-Supporting 3D Carbon Nitride with Tunable n -> pi* Electronic Transition for Enhanced Solar Hydrogen Production

Sufeng An et al.

Summary: Self-supporting 3D carbon nitrides with unique features such as improved charge mobility and controllable n -> pi* electronic transition have been synthesized through a facile stepwise pyrolytic strategy. By optimizing the structure and optical properties, enhanced H-2 evolution rates were achieved, demonstrating the potential for efficient photocatalytic reactions.

ADVANCED MATERIALS (2021)

Article Energy & Fuels

Thiazole-Modified C3N4 Interfacial Layer for Defect Passivation and Charge Transport Promotion in Perovskite Solar Cells

Lian Wang et al.

Summary: An interface engineering strategy was developed to improve the efficiency and stability of perovskite solar cells by introducing a thiophene or thiazole-modified C3N4 layer at the ETL/perovskite interface. Additionally, thiophene and thiazole can reduce nonradiative recombination by donating electrons and passivating defects. The resulting devices achieved outstanding efficiency and improved moisture stability.

SOLAR RRL (2021)

Article Chemistry, Multidisciplinary

Rubidium Fluoride Modified SnO2 for Planar n-i-p Perovskite Solar Cells

Jing Zhuang et al.

Summary: Regulating the electron transport layer (ETL) using the cost-effective modification material rubidium fluoride (RbF) can enhance the electron mobility of SnO2 and suppress hysteresis in perovskite solar cells (PSCs). Double-sided passivated PSCs with RbF on the SnO2 surface and p-methoxyphenethylammonium iodide on the perovskite surface achieved an outstanding PCE result with a small V-oc deficit.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Energy & Fuels

Smoothing and coverage improvement of SnO2 electron transporting layer by NH4F treatment: Enhanced fill factor and efficiency of perovskite solar cells

Razieh Keshtmand et al.

Summary: Surface modification of SnO2 ETL with long-time NH4F treatment leads to improved morphology, better FTO coverage, and enhanced device performance, with possible presence of F on the surface and higher carrier density inside the layer. This treatment also results in higher recombination resistance and better electron capturing properties, as shown by various measurements.

SOLAR ENERGY (2021)

Article Chemistry, Physical

Double-layer synergistic optimization by functional black phosphorus quantum dots for high-efficiency and stable planar perovskite solar cells

Yuhong Zhang et al.

Summary: This study utilized a double-layer synergistic optimization approach by introducing functional black phosphorus quantum dots into both the electron transport layer and perovskite layer of perovskite solar cells. The synergistic effects led to efficient PSCs with high power conversion efficiency and ultrahigh open-circuit voltage, as well as improved long-term and humidity stability.

NANO ENERGY (2021)

Article Engineering, Chemical

Nitrogen-defective g-C3N4 with enhanced photocatalytic performance fabrication by destructing C=N-C bond via H2O2

Xue Wang et al.

Summary: N-defective g-C3N4 nanosheets were fabricated through a sample oxidative reaction using H2O2, improving the photocatalytic degradation efficiency of Methylene blue (MB). The existence of hydroxyl radicals (center dot OH) and N-defects were confirmed by PL and HPIC, respectively, with an increase in nitrate concentration in solution. The N-defects were speculated to originate from the destruction of C=N-C bonds, leading to a narrowed bandgap and enhanced separation and transfer of photo-generated carriers.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Energy & Fuels

Optimizing Vertical Crystallization for Efficient Perovskite Solar Cells by Buried Composite Layers

Xiaoyu Yang et al.

Summary: A new buried contact using graphitic carbon nitride and tin oxide has been reported to optimize the electron-transporting layer in planar-heterojunction perovskite solar cells. By manipulating the vertical composition and crystallinity of the top perovskite film, the efficiency of the PSCs has been improved.

SOLAR RRL (2021)

Article Chemistry, Physical

Graphitic carbon nitride doped SnO2 enabling efficient perovskite solar cells with PCEs exceeding 22%

Jinbo Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Multidisciplinary

Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability

Jingjing Tian et al.

ADVANCED MATERIALS (2019)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Chemistry, Multidisciplinary

Defective g-C3N4 Prepared by the NaBH4 Reduction for High-Performance H2 Production

Yuanjing Wen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Review Chemistry, Multidisciplinary

SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells

Qi Jiang et al.

SMALL (2018)

Article Multidisciplinary Sciences

Structural absorption by barbule microstructures of super black bird of paradise feathers

Dakota E. McCoy et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Passivated Perovskite Crystallization via g-C3N4 for High-Performance Solar Cells

Lu-Lu Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

Planar-Structure Perovskite Solar Cells with Efficiency beyond 21%

Qi Jiang et al.

ADVANCED MATERIALS (2017)

Review Chemistry, Multidisciplinary

Heterogeneous catalytic hydrogenation of CO2 by metal oxides: defect engineering - perfecting imperfection

Jia Jia et al.

CHEMICAL SOCIETY REVIEWS (2017)

Article Chemistry, Physical

Organohalide Lead Perovskites for Photovoltaic Applications

Abd Rashid bin Mohd Yusoff et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Article Chemistry, Multidisciplinary

Macroscopic 3D Porous Graphitic Carbon Nitride Monolith for Enhanced Photocatalytic Hydrogen Evolution

Qinghua Liang et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Multidisciplinary

Low-Temperature Solution-Processed Tin Oxide as an Alternative Electron Transporting Layer for Efficient Perovskite Solar Cells

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Physical

Preparation of water-dispersible porous g-C3N4 with improved photocatalytic activity by chemical oxidation

Hui-Jun Li et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Review Chemistry, Physical

A fantastic graphitic carbon nitride (g-C3N4) material: Electronic structure, photocatalytic and photoelectronic properties

Guoping Dong et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS (2014)

Article Chemistry, Physical

A plasmonic photocatalyst of Ag/AgBr nanoparticles coupled with g-C3N4 with enhanced visible-light photocatalytic ability

Yuanguo Xu et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2013)

Article Chemistry, Multidisciplinary

Graphene-Like Carbon Nitride Nanosheets for Improved Photocatalytic Activities

Ping Niu et al.

ADVANCED FUNCTIONAL MATERIALS (2012)

Article Chemistry, Multidisciplinary

A facile approach to synthesize novel oxygen-doped g-C3N4 with superior visible-light photoreactivity

Jianghua Li et al.

CHEMICAL COMMUNICATIONS (2012)

Article Chemistry, Multidisciplinary

Boron- and Fluorine-Containing Mesoporous Carbon Nitride Polymers: Metal-Free Catalysts for Cyclohexane Oxidation

Yong Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)

Review Chemistry, Multidisciplinary

Beyond Photovoltaics: Semiconductor Nanoarchitectures for Liquid-Junction Solar Cells

Prashant V. Kamat et al.

CHEMICAL REVIEWS (2010)

Article Chemistry, Physical

Nitrogen-Rich Carbon Nitride Hollow Vessels: Synthesis, Characterization, and Their Properties

Yingai Li et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2010)

Article Materials Science, Multidisciplinary

Preparation and characterization of graphitic carbon nitride through pyrolysis of melamine

Xuefei Li et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)