☆ 4.6 Article

A new scheme of the fractional-order super twisting algorithm for asynchronous generator-based wind turbine

ENERGY REPORTS (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Information Systems

FPGA in the Loop Implementation for Observer Sliding Mode Control of DFIG-Generators for Wind Turbines

Houda El Alami et al.

Summary: This paper presents a new contribution of the nonlinear control technique in harnessing electrical energy in a wind energy system. The proposed model uses the nonlinear sliding mode technique to control the power of the DFIG-Generator, which is connected to the power grid via two converters. The model is validated through tracking and robustness tests using real wind speed. The control system is developed using Matlab/Simulink, and the FPGA in the Loop technique is employed to design the DFIG model. Through co-simulation, the proposed model demonstrates high efficiency in terms of speed and robustness, with a THD rate of 0.95, and the sliding mode controller shows significant improvement in the quality of energy produced by the wind system.

ELECTRONICS (2022)

Add to Collection

Article Automation & Control Systems

New direct power synergetic-SMC technique based PWM for DFIG integrated to a variable speed dual-rotor wind power

Habib Benbouhenni et al.

Summary: In this work, a new direct power synergetic-sliding mode technique based on PWM strategy is designed for DFIG integrated to DRWP systems. The designed strategies produce voltage pulse width locations identical to those of a classical two-level inverter. Compared with traditional control methods, this novel strategy can effectively minimize the undulations of power and improve stability.

AUTOMATIKA (2022)

Add to Collection

Article Energy & Fuels

Improving the Maximum Power Extraction from Wind Turbines Using a Second-Generation CRONE Controller

Mourad Yessef et al.

Summary: Developing precise and robust algorithms for maximum power tracking in variable speed wind turbines is crucial in wind engineering research. This study proposes a novel technique that utilizes a second-generation CRONE controller for maximum power generation in a wind energy conversion system. Compared to traditional controllers, this method offers better performance in extracting maximum energy and ensuring high system stability. The study evaluated the proposed method using mathematical modeling and compared it with four other MPPT control techniques, demonstrating its superiority in terms of response time, error percentage, set-point tracking, and precision.

ENERGIES (2022)

Add to Collection

Article Energy & Fuels

A Novel Artificial Intelligence Maximum Power Point Tracking Technique for Integrated PV-WT-FC Frameworks

Mohammad Junaid Khan et al.

Summary: The development of each country depends on electricity. Conventional energy sources are decaying, leading to the increased investigation of renewable energy sources as alternatives. The output characteristics of renewable energy sources are non-linear, thus requiring maximum power point tracking techniques for extracting the maximum power. This research article employs an Adaptive Neuro-Fuzzy Inference System MPPT framework to solve this problem.

ENERGIES (2022)

Add to Collection

Article Physics, Multidisciplinary

Robust Variable-Step Perturb-and-Observe Sliding Mode Controller for Grid-Connected Wind-Energy-Conversion Systems

Ilham Toumi et al.

Summary: A novel robust variable-step perturb-and-observe (RVS-P&O) algorithm and a second-order sliding mode controller were developed for maximum power point tracking (MPPT) and grid injection control in wind turbine systems. Simulation results showed that this algorithm exhibited significant advantages over competing methods in terms of power efficiency and response time.

ENTROPY (2022)

Add to Collection

Article Computer Science, Information Systems

Application of Fractional-Order PI Controllers and Neuro-Fuzzy PWM Technique to Multi-Rotor Wind Turbine Systems

Habib Benbouhenni et al.

Summary: In recent years, there has been increasing development in the methods of controlling electrical machines to reduce fluctuations in torque and electric current in renewable energy systems. This study proposes a new method that combines nonlinear area and fractional calculus to reduce current and torque fluctuations and improve current quality.

ELECTRONICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Robust sliding-Backstepping mode control of a wind system based on the DFIG generator

Farah Echiheb et al.

Summary: This paper presents a new approach to improve the control techniques of wind systems and enhance the quality of energy produced in the grid. By utilizing the adaptive Backstepping technique in the sliding mode model, the issue of chattering in the double-fed asynchronous generator's power control is resolved. This hybrid technique improves the efficiency, active power, and reactive power of the wind system by correcting errors and enhancing precision and stability.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Energy & Fuels

Modeling and Control Strategy of Wind Energy Conversion System with Grid-Connected Doubly-Fed Induction Generator

Abrar Ahmed Chhipa et al.

Summary: Wind energy conversion systems (WECS) are an important and rapidly growing source of electrical power generation that can improve power supply in remote communities. This study proposes a control strategy based on maximum power point tracking (MPPT) to optimize the performance and efficiency of WECS under fluctuating wind speeds, and simulation results validate its effectiveness and good dynamic performance.

ENERGIES (2022)

Add to Collection

Article Energy & Fuels

Nonlinear Control Strategies for Enhancing the Performance of DFIG-Based WECS under a Real Wind Profile

Hamid Chojaa et al.

Summary: This paper proposed an advanced backstepping controller (ABC) for improving the performance of doubly fed induction generator (DFIG)-based grid-connected wind energy conversion systems (WECSs) under variable wind speed conditions. The controller utilized blade pitch control, rotor-side control, and grid-side control schemes to enhance the integration of the DFIG-WECS. Simulation results showed that the proposed ABC controller effectively improved the performance of the system under varying wind speeds.

ENERGIES (2022)

Add to Collection

Article Energy & Fuels

ANT-colony optimization-direct torque control for a doubly fed induction motor : An experimental validation

Said Mahfoud et al.

Summary: Direct Torque Control (DTC) offers an optimal solution for controlling the behaviors of alternative motors, but speed overshoots, fluxes, and torque ripples remain challenges. The lack of robustness of the PID controller in nonlinear systems has led to the application of optimization algorithms to adjust its parameters. This approach has been shown to enhance system performance in the presence of nonlinearity.

ENERGY REPORTS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Coupled Indirect Torque Control and Maximum Power Point Tracking Technique for Optimal Performance of 12/8 Switched Reluctance Generator-Based Wind Turbines

Mahmoud Zine et al.

Summary: The combination of indirect torque control strategy and maximum power point tracking (MPPT) technique in this study enhances renewable energy production in wind turbines. By modeling, simulating, and implementing a hysteresis current controller, the proposed strategy achieves improved efficiency and high-quality energy generation in the wind turbine.

MACHINES (2022)

Add to Collection

Article Computer Science, Information Systems

Wind Turbine Emulator: A Tool for Experimental and Computational Study

J. Oliveira et al.

Summary: This paper presents a wind turbine emulator capable of simulating the power curves of a turbine to improve wind generation technology. The emulator uses a three-phase induction motor driven by a frequency inverter with closed loop control of torque and speed. Experimental results demonstrate the effectiveness of using the emulator to represent a real wind turbine.

IEEE LATIN AMERICA TRANSACTIONS (2021)

Add to Collection

Article Energy & Fuels

Integral sliding mode control for DFIG based WECS with MPPT based on artificial neural network under a real wind profile

Hamid Chojaa et al.

Summary: A robust integral sliding mode control (ISMC) with Lyapunov function was proposed for controlling the active and reactive powers of a doubly fed induction generator (DFIG) based wind turbine, achieving high dynamic performances. Through a robust MPPT algorithm with mechanical speed control and artificial Neural Network Controller (ANNC), the system operated around an optimal rotational speed to extract maximum power. The effectiveness and robustness of the control methods were demonstrated through testing in MATLAB/Simulink environment, showing superior performance in dynamic response, total harmonic distortion, reference tracking ability, etc.

ENERGY REPORTS (2021)

Add to Collection

Article Energy & Fuels

A Synergetic Sliding Mode Controller Applied to Direct Field-Oriented Control of Induction Generator-Based Variable Speed Dual-Rotor Wind Turbines

Habib Benbouhenni et al.

Summary: A synergetic sliding mode (SSM) approach is designed to address the drawbacks of direct field-oriented control (DFOC) of induction generators integrated into variable speed dual-rotor wind power systems. By using SSM controllers in the DFOC strategy, active power, electromagnetic torque, and reactive power ripples are reduced, leading to efficient state estimation. The effectiveness of this strategy has been evaluated in variable speed dual-rotor wind power systems with MPPT technique.

ENERGIES (2021)

Add to Collection

Article Energy & Fuels

Comprehensive Modeling and Control of Grid-Connected Hybrid Energy Sources Using MPPT Controller

Shazly A. Mohamed et al.

Summary: The study focuses on the synergies between nuclear and renewable energies in the evolving grid, aiming to enhance system reliability and power quality.

ENERGIES (2021)

Add to Collection

Article Computer Science, Information Systems

Terminal Synergetic Control for Direct Active and Reactive Powers in Asynchronous Generator-Based Dual-Rotor Wind Power Systems

Habib Benbouhenni et al.

Summary: A terminal synergetic control method is proposed in this work for improving the performance of ASG-based dual-rotor wind power systems. Simulation results showed the robustness of the method against parameter variations and its effectiveness in power undulations. The proposed TSC was shown to be more effective than the traditional PI controller in tracking power and minimizing the undulations effect.

ELECTRONICS (2021)

Add to Collection

Article Computer Science, Information Systems

Improving Wind Turbine Pitch Control by Effective Wind Neuro-Estimators

J. Enrique Sierra-Garcia et al.

Summary: This study focuses on the wind measurement issue with floating offshore wind turbines and proposes a novel pitch neuro-control architecture based on neuro-estimators of the effective wind. The control system includes a PID controller, a lookup table, a neuro-estimator, and a virtual sensor, with neural networks trained online to adapt to changes in the environment. Intensive simulations validate the effectiveness of this neuro control approach, showing an improvement of 16% for sinusoidal wind and an average improvement of 8% compared to a PID controller.

IEEE ACCESS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Direct torque control improvement of a variable speed DFIG based on a fuzzy inference system

W. Ayrir et al.

MATHEMATICS AND COMPUTERS IN SIMULATION (2020)

Add to Collection

Article Automation & Control Systems

Improved Direct Torque Control for a DFIG under Symmetrical Voltage Dip With Transient Flux Damping

M. R. Agha Kashkooli et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

Add to Collection

Article Energy & Fuels

Mathematical Modeling and Position-Sensorless Algorithm for Stator-Side Field-Oriented Control of Rotor-Tied DFIG in Rotor Flux Reference Frame

Rajeshkumar M. Prasad et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2020)

Add to Collection

Article Energy & Fuels

Turbine Startup and Shutdown in Wind Farms Featuring Partial Power Processing Converters

Marten Pape et al.

IEEE OPEN ACCESS JOURNAL OF POWER AND ENERGY (2020)

Add to Collection

Article Energy & Fuels

Stand-Alone DFIG FOC Sensitivity and Stability Under Mismatched Inductances

Inaki Erazo-Damian et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2019)

Add to Collection

Article Engineering, Industrial

Reducing Ripple in Wind Power Systems

Sam Mahmodicherati et al.

IEEE INDUSTRY APPLICATIONS MAGAZINE (2019)

Add to Collection

Article Engineering, Multidisciplinary

Impact of Correlation Between Wind Speed and Turbine Availability on Wind Farm Reliability

Nga Nguyen et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

A Novel Position-Sensorless Algorithm for Field-Oriented Control of DFIG With Reduced Current Sensors

Rajeshkumar M. Prasad et al.

IEEE TRANSACTIONS ON SUSTAINABLE ENERGY (2019)

Add to Collection

Article Computer Science, Information Systems

Application of Superconductors to Improve the Performance of DFIG-Based WECS

Mohammed Mosaad et al.

IEEE ACCESS (2019)

Add to Collection

Article Computer Science, Information Systems

Control of Powers for Wind Power Generation and Grid Current Harmonics Filtering From Doubly Fed Induction Generator: Comparison of Two Strategies

Adson Bezerra Moreira et al.

IEEE ACCESS (2019)

Add to Collection

Article Energy & Fuels

Analysis on Application of a Current-source Based DFIG Wind Generator Model

Jin Ma et al.

CSEE JOURNAL OF POWER AND ENERGY SYSTEMS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Turbine Stability-Constrained Available Wind Power of Variable Speed Wind Turbines for Active Power Control

Minghui Yin et al.

IEEE TRANSACTIONS ON POWER SYSTEMS (2017)

Add to Collection

Article Automation & Control Systems

A comprehensive review of LVRT capability and sliding mode control of grid-connected wind-turbine-driven doubly fed induction generator

K. D. E. Kerrouche et al.

AUTOMATIKA (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Direct Voltage Control With Slip Angle Estimation to Extend the Range of Supported Asymmetric Loads for Stand-Alone DFIG

Ahmad Bashar Ataji et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2016)

Add to Collection

Article Energy & Fuels

Advanced Pitch Angle Control Based on Fuzzy Logic for Variable-Speed Wind Turbine Systems

Tan Luong Van et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2015)

Add to Collection

Article Automation & Control Systems

Improved Direct Torque and Reactive Power Control of a Matrix-Converter-Fed Grid-Connected Doubly Fed Induction Generator

Suman Mondal et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Torque Ripple Reduction in a DFIG-DC System by Resonant Current Controllers

Matteo F. Iacchetti et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Comparison of Advanced Control Techniques for Grid Side Converter of Doubly-Fed Induction Generator Back-to-Back Converters to Improve Power Quality Performance During Unbalanced Voltage Dips

Murali M. Baggu et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2015)

Add to Collection

Article Green & Sustainable Science & Technology

Advanced Control Scheme for an IPM Synchronous Generator-Based Gearless Variable Speed Wind Turbine

M. Enamul Haque et al.

IEEE TRANSACTIONS ON SUSTAINABLE ENERGY (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.