4.7 Review

Recovery of spent SCR denitration catalyst: A review and recent advances

Related references

Note: Only part of the references are listed.
Review Energy & Fuels

Mechanism, performance and modification methods for NH3-SCR catalysts: A review

Zhiwei Shi et al.

Summary: This article systematically reviews the modification methods of catalysts in selective catalytic reduction (SCR) technology, analyzes the effects of various catalyst parameters on denitrification efficiency, and discusses the influences of spatial structure on catalytic effect. Additionally, it compares the performance of catalysts with different components and summarizes the current problems in catalyst research. The development of NH3-SCR technology is also prospected.
Article Metallurgy & Metallurgical Engineering

A promising method to recover spent V2O5-WO3/TiO2 catalyst: treatment by vanadium-titanium magnetite sintering process

Hong-ming Long et al.

Summary: Research has shown that adding spent SCR catalysts can enhance sintering granulation and green feed permeability, leading to increased productivity and flame front speed. However, exceeding a certain proportion of spent SCR catalysts may result in a decrease in product quality indexes, attributed to the rise in perovskite content in the finished sinter.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

Article Engineering, Environmental

Application of post-combustion ultra-low NOx emissions technology on coal slime solid waste circulating fluidized bed boilers

Yuan Xiao et al.

Summary: Through adjusting the combustion atmosphere and primary air volume, optimization was conducted for post-combustion technology, resulting in a significant reduction of NOx emissions to 42.6 mg/m(3).

WASTE MANAGEMENT (2022)

Article Chemistry, Physical

Analysis of Hydrometallurgical Methods for Obtaining Vanadium Concentrates from the Waste by Chemical Production of Vanadium Pentoxide

Ulyana Kologrieva et al.

Summary: The paper introduces hydrometallurgical methods to recycle wastes of vanadium pentoxide chemical fabrication. Concentrates with high V2O5 content can be obtained through counterflow leaching and reduction precipitation. Moreover, suitable vanadium solutions for hydrolysis and precipitation can be obtained through multistage counterflow leaching. The paper also provides detailed consumption and technological parameters.

MATERIALS (2022)

Article Chemistry, Physical

Studying the leaching mechanism of spent SCR catalyst with different leaching agents (NaOH, H2SO4, HCl and HNO3) using DFT calculations

Zhuanghua Nie et al.

Summary: The leaching mechanism of spent selective catalytic reduction catalyst was investigated using density functional theory calculations and experiments. The study showed that different leaching agents had different adsorption and dissociation behaviors on the catalyst, leading to varying leaching abilities. The experimental results confirmed the calculations and revealed that acidic solutions had a higher leaching ability.

APPLIED SURFACE SCIENCE (2022)

Article Environmental Sciences

Twenty years of China's water pollution control: Experiences and challenges

Wenzhong Tang et al.

Summary: Water pollution is a major global environmental problem, especially in developing countries. China has made remarkable achievements in water pollution control in the past twenty years, with wastewater collection and treatment capacity reaching a level similar to developed countries. Although the environmental quality of surface water has continuously improved, water pollution problems persist in the eastern river basins alongside remarkable economic progress. Rapid economic growth, rather than population growth, is the limiting factor for water pollution control in China. Further efforts are needed to enhance wastewater collection and treatment capacity and bridge the gap between effluent discharge limits and surface water quality standards. China's progress in water pollution control provides valuable insights for other developing countries.

CHEMOSPHERE (2022)

Article Energy & Fuels

Research of coupling technologies on NOx reduction in a municipal solid waste incinerator

Xucong Yang et al.

Summary: This study investigated the denitrification process in municipal solid waste incinerator based on coupling technologies of flue gas recirculation, over-fired air, and selective non-catalytic reduction through numerical simulation. The results demonstrated that the application of flue gas recirculation, especially at a ratio of 20%, significantly reduced NOx emissions and improved boiler efficiency. When coupled with over-fired air technology, the selective non-catalytic reduction technology further enhanced the removal efficiency of NOx. Overall, the coupling of these technologies achieved a high NOx removal efficiency of 76.48%.
Review Chemistry, Applied

The effects of Mn-based catalysts on the selective catalytic reduction of NOx with NH3 at low temperature: A review

Zhiqing Zhang et al.

Summary: This paper reviews the progress of Mn-based catalysts for low-temperature selective catalytic reduction of NOx. The effects of various factors on catalytic activity, preparation strategies, catalytic performance, and resistance of Mn-based catalysts were systematically reviewed. The mechanisms of deactivation of Mn-based catalysts were also studied.

FUEL PROCESSING TECHNOLOGY (2022)

Article Chemistry, Physical

Synthesis of Cu-BTC by room temperature hydrothermal and its low temperature SCR denitration

Shu Hao et al.

Summary: In this study, Cu-BTC was successfully prepared using room temperature hydrothermal synthesis method and applied to SCR flue gas denitration. The catalyst samples were characterized by multiple techniques, showing that higher reaction times led to increased purity and specific surface area of Cu-BTC, resulting in improved denitration efficiency. Additionally, the Cu-BTC catalyst exhibited a unique hexagonal prism crystal structure and high denitration rate at 270 degrees C.

JOURNAL OF MOLECULAR STRUCTURE (2022)

Review Environmental Sciences

An Evaluation of Risk Ratios on Physical and Mental Health Correlations due to Increases in Ambient Nitrogen Oxide (NOx) Concentrations

Stephanie Shaw et al.

Summary: Nitrogen oxides (NOx) are major air pollutants that have significant impacts on both the environment and human health. Studies have found a strong association between NOx exposure and mental health issues, followed by physical health problems. These findings highlight the importance of reducing ambient NOx levels.

ATMOSPHERE (2022)

Article Engineering, Chemical

DeNOx Characteristics of Commercial SCR Catalyst Regenerated On-Line by Dry Ice Blasting in a Coal-Fired Power Plant

Xingyu Xie et al.

Summary: The dry ice blasting on-line regeneration technology was used to treat a commercial SCR catalyst used in a coal-fired power plant. The results showed that this regeneration technology improved the performance and deNOx efficiency of the catalyst. Deposits and compounds on the catalyst surface caused deactivation.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Article Environmental Sciences

Assessing heavy-duty vehicles (HDVs) on-road NOx emission in China from on-board diagnostics (OBD) remote report data

Junfang Wang et al.

Summary: This paper investigates the impact of China VI emission standard on NOx emissions from heavy-duty vehicles, and concludes that the standard significantly reduces NOx emissions. It is estimated that by the end of 2020, the China VI standard has resulted in a reduction of 43,969 tons of NOx emissions.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Review Chemistry, Multidisciplinary

Progress of selective catalytic reduction denitrification catalysts at wide temperature in carbon neutralization

Dehai Lin et al.

Summary: This article reviews the research progress and deactivation mechanisms of selective catalytic reduction (SCR) denitration catalysts applied in a wide temperature range, discusses the necessity and challenges of recycling spent catalysts, and provides prospects for the future development of this catalyst.

FRONTIERS IN CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

Environmentally friendly approach for sustainable recycling of spent SCR catalysts and Al alloy scrap to prepare TiAl3 and low-Fe Al alloys

Yakun Zhang et al.

Summary: An environmentally friendly method was proposed in this study to recycle titanium (Ti) and aluminum (Al) from spent selective catalytic reduction (SCR) catalysts and aluminum alloy scrap, and prepare high-value titanium aluminide (TiAl3) and low-iron (Fe) aluminum (Al) alloys. The results showed that the use of a MgO crucible and electromagnetic force improved the extraction ratio of Ti and tungsten (W), and electromagnetic directional crystallization achieved the separation of the two alloys and removal of impurities.

GREEN CHEMISTRY (2022)

Proceedings Paper Engineering, Chemical

Novel Environmentally Friendly Leaching Process for Vanadium and Tungsten Recovery from Spent SCR Catalyst

Ana Belen Cueva Sola et al.

Summary: Selective catalytic reduction (SCR) is the best technology for reducing nitrogen oxide (NOx) emissions in industries. The disposal of deactivated SCR catalysts in landfills poses a significant environmental issue, making the recovery of vanadium and tungsten a major motivation for this research. Through investigating the soda roasting process and water leaching, it was found that the optimal parameters can reduce roasting temperature, leaching time, and impurities leached with the metals.

RARE METAL TECHNOLOGY 2022 (2022)

Article Chemistry, Applied

Effect of biofuel- and lube oil-originated sulfur and phosphorus on the performance of Cu-SSZ-13 and V2O5-WO3/TiO2 SCR catalysts

Sandra Dahlin et al.

Summary: Two different SCR catalysts showed varying performance in capturing phosphorus and sulfur from biodiesel exhausts, with sulfur mainly affecting the Cu-SSZ-13 catalyst at lower temperatures. The use of an oxidation catalyst upstream can protect the SCR catalysts from phosphorus poisoning.

CATALYSIS TODAY (2021)

Article Engineering, Environmental

Unusual positive effect of SO2 on Mn-Ce mixed-oxide catalyst for the SCR reaction of NOx with NH3

JiaYu Chen et al.

Summary: The high-performance denitration catalyst based on Mn-Ce mixed-oxide demonstrated outstanding low-temperature activity and excellent SO2 tolerance, with abundant active sites and a porous structure. The introduction of SO2 enhanced catalytic activity and suppressed unwanted ammonia oxidation. The reaction pathway on the mixed oxide was confirmed to be the L-H mechanism based on in situ DRIFTS.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Direct and efficient reduction of perfluorooctanoic acid using bimetallic catalyst supported on carbon

Guanhong Liu et al.

Summary: A bimetallic AlCNi structure was synthesized successfully in this study, showing high efficiency in removing PFOA pollutants. Multiple characterizations confirmed the predominant degradation pathways, providing feasibility for PFOA treatment without the need for chemical agents.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Energy & Fuels

Recent progress of metal-exchanged zeolites for selective catalytic reduction of NOx with NH3 in diesel exhaust

Xiaofeng Wang et al.

Summary: This review summarizes the development of zeolite catalysts in the SCR reaction, including Cu, Fe, Mn and other metal-exchanged zeolites. The study discusses the active sites of different metal-exchanged zeolites in NH3-SCR reaction, emphasizes the role of second metals and metal oxides, and effects of preparation methods and topologies. Challenges and further perspectives of metal-exchanged zeolites in NH3-SCR reaction are proposed to enhance the efficiency of NOx removal.
Article Metallurgy & Metallurgical Engineering

Selective recovery of vanadium pentoxide from spent catalysts of sulfuric acid production: Sustainable approach

Elena Romanovskaia et al.

Summary: The study focused on extracting vanadium from spent vanadium catalysts of sulfuric acid production through a two-step leaching process, resulting in a V2O5 product with a purity of 85-87 wt%. The highest vanadium extraction yield achieved was 98 wt% through oxidizing of leaching solutions by 30 wt% (NH4)2S2O8.

HYDROMETALLURGY (2021)

Article Crystallography

Efficient Separation of Silicon and Vanadium by Sodium Roasting-Water Leaching from Vanadium Slag and CaV2O6 Preparation

Changqing Li et al.

Summary: Calcium vanadate (CaV2O6), a new product obtained from vanadium slag, was successfully synthesized by sodium roasting-water leaching and calcium precipitation. The study systematically investigated the separation behavior of vanadium and silicon during the process, and achieved a purity of 95.69% for the precipitated CaV2O6 under specific conditions.

CRYSTALS (2021)

Article Engineering, Chemical

Optimization of Roasting Parameters for Recovery of Vanadium and Tungsten from Spent SCR Catalyst with Composite Roasting

Bo Wang et al.

Summary: The process of sodium roasting and water leaching is an effective method to extract vanadium and tungsten from spent SCR catalysts, and the leaching efficiencies can be improved by optimizing the roasting parameters and additives.

PROCESSES (2021)

Article Metallurgy & Metallurgical Engineering

Recovery of tungsten from acidic solutions rich in calcium and iron

Xuheng Liu et al.

Summary: A novel solvent extraction process was developed to extract tungsten from acidic solutions rich in calcium and iron, achieving efficient extraction and separation through pre-decalcification and stripping processes. The efficient extraction of tungsten and the utilization of impurities demonstrate excellent prospects for industrial applications.

HYDROMETALLURGY (2021)

Article Chemistry, Multidisciplinary

Experimental Study on Simultaneous Desulfurization and Denitrification by DBD Combined with Wet Scrubbing

Liang Yang et al.

Summary: The experimental study on desulfurization and denitrification using a DBD reactor combined with a wet scrubbing tower showed high desulfurization efficiency (97-100%) and variable denitrification efficiency (12-96%) under different operating conditions. The key problem lies in denitration, with factors such as DBD power, simulated flue gas flow rate, NaOH solution concentration, spray density, packing type, and packing height influencing denitrification efficiency.

APPLIED SCIENCES-BASEL (2021)

Article Chemistry, Physical

Removal of Vand Fe from spent denitrification catalyst by using oxalic acid: Study of dissolution kinetics and toxicity

Wenfen Wu et al.

Summary: Selective dissolution of V and Fe from spent denitrification catalyst using oxalic acid can effectively reduce the environmental impact, with dissolution kinetics controlled by redox reactions and diffusion.

GREEN ENERGY & ENVIRONMENT (2021)

Review Engineering, Environmental

Review on the progress in emission control technologies for the abatement of CO2, SOx and NOx from fuel combustion

Usama Asghar et al.

Summary: Extensive research has been conducted on controlling CO2, SOx, and NOx emissions in recent years, with a focus on improving removal efficiencies and reducing operational costs of conventional technologies while introducing new environmentally friendly technologies.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Review Engineering, Environmental

NOx reduction behaviour in copper zeolite catalysts for ammonia SCR systems: A review

Sooraj Mohan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Green & Sustainable Science & Technology

A review on management and recycling of spent selective catalytic reduction catalysts

Francesco Ferella

JOURNAL OF CLEANER PRODUCTION (2020)

Article Chemistry, Physical

Recovery of vanadium and tungsten from spent selective catalytic reduction catalyst by alkaline pressure leaching

Nana Liu et al.

PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING (2020)

Review Environmental Sciences

Technologies for the nitrogen oxides reduction from flue gas: A review

Fatemeh Gholami et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Environmental Sciences

Life cycle assessment of ultra-low treatment for steel industry sintering flue gas emissions

Lin Cui et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Review Engineering, Environmental

Recycling strategies of spent V2O5-WO3/TiO2 catalyst: A review

Qijun Zhang et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Article Engineering, Chemical

Sustainable recycling of titanium from TiO2 in spent SCR denitration catalyst via molten salt electrolysis

Xuyang Bai et al.

Journal of Energy Chemistry (2020)

Article Engineering, Environmental

Chemical Kinetics Modeling and Analysis of Monomethylamine for Power Plants Selective Non-Catalytic Reduction (SNCR) Systems

Carlos E. Romero et al.

EMISSION CONTROL SCIENCE AND TECHNOLOGY (2020)

Article Chemistry, Multidisciplinary

Regeneration of commercial SCR catalyst deactivated by arsenic poisoning in coal-fired power plants

Qiang Lu et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2019)

Article Materials Science, Multidisciplinary

High-Temperature Interactions Between Vanadium-Titanium Magnetite Carbon Composite Hot Briquettes and Pellets Under Simulated Blast Furnace Conditions

Wei Zhao et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)

Article Environmental Sciences

Effect of iron loading on the performance and structure of Fe/ZSM-5 catalyst for the selective catalytic reduction of NO with NH3

Xue-tao Wang et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Review Engineering, Environmental

A critical review on the method of simultaneous removal of multi-air-pollutant in flue gas

Han Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Inorganic & Nuclear

Deoxydehydration using a commercial catalyst and readily available reductant

Christine A. Navarro et al.

INORGANIC CHEMISTRY COMMUNICATIONS (2019)

Article Materials Science, Multidisciplinary

Titanium Extraction from Spent Selective Catalytic Reduction Catalysts in a NaOH Molten-Salt System: Thermodynamic, Experimental, and Kinetic Studies

Qijun Zhang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)

Article Environmental Sciences

Combined NOx and noise pollution from road traffic in Trabzon, Turkey

Melike Nese Tezel et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Article Metallurgy & Metallurgical Engineering

The kinetics of vanadium extraction from spent hydroprocessing catalyst by leaching with sulfuric acid at atmospheric pressure

Hongjun Wang et al.

METALLURGICAL RESEARCH & TECHNOLOGY (2019)

Proceedings Paper Energy & Fuels

On the Combination of fuel-rich/lean burner with MILD combustion for further NOx emission reduction

Mingchen Xu et al.

INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)

Article Chemistry, Multidisciplinary

Study on the removal of NO from flue gas by wet scrubbing using NaClO3

Deqi Shi et al.

JOURNAL OF THE SERBIAN CHEMICAL SOCIETY (2019)

Article Metallurgy & Metallurgical Engineering

Selective reduction leaching of vanadium and iron by oxalic acid from spent V2O5-WO3/TiO2 catalyst

Wenfen Wu et al.

HYDROMETALLURGY (2018)

Article Metallurgy & Metallurgical Engineering

Spent V2O5-WO3/TiO2 catalyst processing for valuable metals by soda roasting-water leaching

In-Hyeok Choi et al.

HYDROMETALLURGY (2018)

Article Green & Sustainable Science & Technology

Extraction of tungsten and vanadium from spent selective catalytic reduction catalyst for stationary application by pressure leaching process

In-Hyeok Choi et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Metallurgy & Metallurgical Engineering

Comparative kinetic analysis of conventional and ultrasound-assisted leaching of scheelite by sodium carbonate

Jin-hong Yang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)

Article Engineering, Environmental

Highly efficient combustion with low excess air in a modern energy from-waste (EfW) plant

Reto Strobel et al.

WASTE MANAGEMENT (2018)

Article Chemistry, Multidisciplinary

Green Recovery of Titanium and Effective Regeneration of TiO2 Photocatalysts from Spent Selective Catalytic Reduction Catalysts

Qijun Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Metallurgy & Metallurgical Engineering

Optimizing vanadium and tungsten leaching with lowered silicon from spent SCR catalyst by pre-mixing treatment

Qingfa Su et al.

HYDROMETALLURGY (2018)

Article Environmental Sciences

Preparation of Photocatalytic Zn3(VO4)2/ZnWO4 from Waste V2O5-WO3/TiO2 SCR Catalyst

Yuanzhen Wang et al.

WASTE AND BIOMASS VALORIZATION (2017)

Article Engineering, Chemical

Modeling Deactivation of Catalysts for Selective Catalytic Reduction of NO, by KCI Aerosols

Brian K. Olsen et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Article Chemistry, Physical

Self-assembled twine-like Na2Ti3O7 nanostructure as advanced anode for sodium-ion batteries

Xiao Yan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Engineering, Environmental

Nitrogen oxides emissions from the MILD combustion with the conditions of recirculation gas

Min Park et al.

JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION (2017)

Review Environmental Sciences

Abatement technologies for high concentrations of NOx and SO2 removal from exhaust gases: A review

Yongxia Sun et al.

CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2016)

Article Environmental Sciences

Characteristics of NOx emission from Chinese coal-fired power plants equipped with new technologies

Zizhen Ma et al.

ATMOSPHERIC ENVIRONMENT (2016)

Article Geochemistry & Geophysics

Kinetics of the Carbonate Leaching for Calcium Metavanadate

Peiyang Shi et al.

MINERALS (2016)

Article Geochemistry & Geophysics

Tungsten Recovery from Spent SCR Catalyst Using Alkaline Leaching and Ion Exchange

Wen-Cheng Wu et al.

MINERALS (2016)

Article Chemistry, Physical

Combined effect of KCl and SO2 on the selective catalytic reduction of NO by NH3 over V2O5/TiO2 catalyst

Qichao Li et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Article Chemistry, Multidisciplinary

Recovery of tungsten from spent selective catalytic reduction catalysts by pressure leaching

Joung Woon Kim et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Article Environmental Sciences

Reuse and Valorization of Vanadium and Tungsten from Waste V2O5-WO3/TiO2 SCR Catalyst

Yiting Huo et al.

WASTE AND BIOMASS VALORIZATION (2015)

Article Engineering, Environmental

Pressure drop of structured cartridges with fiber-glass catalysts

A. N. Zagoruiko et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Article Metallurgy & Metallurgical Engineering

The leaching of vanadium pentoxide using sulfuric acid and sulfite as a reducing agent

M. R. Tavakoli et al.

HYDROMETALLURGY (2014)

Article Engineering, Chemical

Kinetics of Vanadium Leaching from a Spent Industrial V2O5/TiO2 Catalyst by Sulfuric Acid

Qichao Li et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Proceedings Paper Computer Science, Theory & Methods

Framework Formation of Financial Data Classification Standard in the era of the Big Data

1ST INTERNATIONAL CONFERENCE ON DATA SCIENCE, ICDS 2014 (2014)

Proceedings Paper Materials Science, Multidisciplinary

The Progress of V2O5/TiO2-based Catalyst in Hg0 Removal and PCCD/Fs Decomposition1`

Dong-liang Gu et al.

EIGHTH CHINA NATIONAL CONFERENCE ON FUNCTIONAL MATERIALS AND APPLICATIONS (2014)

Proceedings Paper Energy & Fuels

The Discharge Status and Technical Analysis of NOX of Thermal Power Plant Boiler

Yang Dong et al.

Energy Engineering and Environment Engineering (2014)

Article Chemistry, Inorganic & Nuclear

Catalysis science of supported vanadium oxide catalysts

Israel E. Wachs

DALTON TRANSACTIONS (2013)

Article Engineering, Environmental

Energy from Waste - Clean, efficient, renewable: Transitions in combustion efficiency and NOx control

M. H. Waldner et al.

WASTE MANAGEMENT (2013)

Article Chemistry, Multidisciplinary

Effect of H2SO4 concentration in washing solution on regeneration of commercial selective catalytic reduction catalyst

Jung Bin Lee et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2012)

Proceedings Paper Engineering, Mechanical

Comparison Of Three Types of NH3-SCR Catalysts

Shuhua Su et al.

MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5 (2012)

Article Engineering, Environmental

Simultaneous removal of SO2 and NOx by wet scrubbing using urea solution

Ping Fang et al.

CHEMICAL ENGINEERING JOURNAL (2011)

Article Metallurgy & Metallurgical Engineering

Extraction of vanadium from stone coal by modified salt-roasting process

Wang Ming-yu et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2011)

Article Engineering, Environmental

Effect of Fly Ash on Catalytic Removal of Gaseous Dioxins over V2O5-WO3 Catalyst of a Sinter Plant

Shu Hao Chang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2009)

Article Engineering, Environmental

Development of silica/vanadia/titania catalysts for removal of elemental mercury from coal-combustion flue gas

Ying Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2008)

Article Chemistry, Physical

NOx reduction and NO2 emission characteristics in rich-lean combustion of hydrogen

Toshio Shudo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Article Materials Science, Multidisciplinary

Vanadium recovery from clay vanadium mineral using an acid leaching method

Li Haoran et al.

RARE METALS (2008)

Article Metallurgy & Metallurgical Engineering

Tungsten recovery from alkaline leach solutions as synthetic scheelite

J. I. Martins et al.

HYDROMETALLURGY (2007)

Article Materials Science, Ceramics

Preparation of bioactive sodium titanate ceramics

Ines Becker et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

Article Chemistry, Multidisciplinary

Wire-mesh honeycomb catalysts for selective catalytic reduction of NO with NH3

Jie Yao et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2006)

Article Materials Science, Multidisciplinary

Modern hydrometallurgical production methods for tungsten

Raj P. Singh Gaur

Article Chemistry, Physical

High-temperature stability of V2O5/TiO2-WO3-SiO2 SCR catalysts modified with rare-earths

M Casanova et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2006)

Article Materials Science, Multidisciplinary

Molten salt synthesis of lead lanthanum zirconate titanate stannate powders and ceramics

SX Zhao et al.

MATERIALS LETTERS (2006)

Article Thermodynamics

Catalytic reduction of NOx in gasoline engine exhaust over copper- and nickel-exchanged X-zeolite catalysts

S Bhattacharyya et al.

ENERGY CONVERSION AND MANAGEMENT (2001)