Related references
Note: Only part of the references are listed.
Article
Optics
Hoang-Dang Le et al.
Summary: This paper presents a novel short fiber Bragg grating (FBG) accelerometer based on a dual mass block structure. The sensor is established on a solid, symmetrical design comprising a V-type beam. The FBG accelerometer configuration causes the FBG fiber to distort twice as much when subjected to external vibration. Theoretical research and optimization of the sensor's natural frequency and sensitivity are performed using MATLAB software, while static structural stress and modal simulation analysis are examined using ANSYS software. An experimental test is conducted to evaluate the sensor's implementation. The sensor has a natural frequency of 880 Hz, with a flat stability frequency response in the 20-340 Hz low-to-middle frequency range. The average sensitivity shows a linearity of approximately 66.95 pm/g, and the transverse anti-interference of the FBG fiber is around 6.53%. This work proposes a suitable method to observe low-and medium-frequency vibration signals in large-scale applications.
OPTICS AND LASER TECHNOLOGY
(2023)
Article
Engineering, Electrical & Electronic
Ruohui Wang et al.
Summary: Fiber Bragg grating (FBG) accelerometers measure vibrations through wavelength shifts caused by dynamic strain. Their high temperature resistance and multiplexing capabilities make them suitable for quasi-distributed applications in harsh environments. Improving the coupling efficiency in the sensor's mechanical structure can enhance the sensitivity of the FBG accelerometer. Additionally, the FBG accelerometer can be developed as a multidimensional sensor, which distinguishes it from distributed-fiber vibration-sensing technology. This paper reviews recent advances in FBG accelerometer developments, focusing on sensitivity enhancement and orientation identification. New techniques such as hybrid strain loading, thin-cladding fiber FBGs, multicore FBGs, and cladding FBGs are introduced.
JOURNAL OF LIGHTWAVE TECHNOLOGY
(2023)
Review
Chemistry, Multidisciplinary
Md Azahar Ali et al.
Summary: This paper reviews the unique and unusual properties of biomedical sensors enabled by 3D printing, exploring new possibilities for biomedical applications in various clinically important areas.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Engineering, Electrical & Electronic
Arnaldo Leal-Junior et al.
Summary: This paper proposes an experimental analysis of different assembly configurations for diaphragm-embedded optical fiber sensors, which investigates the relationship between the configuration angle and the sensor's performance. The results provide guidance for the development of diaphragm-embedded sensors.
IEEE SENSORS JOURNAL
(2022)
Article
Engineering, Electrical & Electronic
Bo Yuan et al.
Summary: This paper investigates a two-dimensional fiber Bragg grating inclinometer which can measure inclination and azimuth angle. By pasting eight FBGs on an elastic cylinder cantilever, the dependence of the wavelength shift of FBGs on inclination and azimuth angles was established. A series of sensing tests were conducted, and the results show that the inclinometer has good sensor performance.
IEEE SENSORS JOURNAL
(2022)
Article
Engineering, Multidisciplinary
Lianqing Zhu et al.
Summary: This paper reviews the history of research on the deformation monitoring of flight vehicles using optical fiber sensing (OFS) technology. It discusses the application of OFS-based deformation monitoring in the aerospace field. The paper identifies the problems encountered in practical applications and proposes future development directions.
Article
Engineering, Electrical & Electronic
Li Zhang et al.
Summary: This article proposes a novel hinge-type fiber Bragg grating (FBG) accelerometer for measuring medium-frequency vertical vibrations. The accelerometer employs a single-notch circular flexure hinge as the elastomer, which allows for high sensitivity, a compact structure, and a relatively wide working frequency range. The performance of the accelerometer is validated through theoretical analysis, finite element analysis, and experimental tests.
IEEE SENSORS JOURNAL
(2022)
Review
Acoustics
Haonan Jin et al.
Summary: This article introduces the piezoelectric actuator and its wide range of applications, highlighting recent developments in high-performance piezoelectric materials. The relationship between material performance and actuator performance is emphasized, and future prospects and challenges for piezoelectric materials and actuators are discussed.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL
(2022)
Article
Engineering, Electrical & Electronic
Shaodong Jiang et al.
Summary: This study introduces a cantilever beam-based FBG accelerometer, with excellent sensor characteristics verified through theoretical model validation and structural optimization analysis. Experimental results demonstrate that the accelerometer is suitable for low frequency and precision vibration measurements, and is feasible for oil well flow monitoring.
OPTICAL FIBER TECHNOLOGY
(2022)
Article
Engineering, Electrical & Electronic
Tianyi Ye et al.
Summary: In this study, a multi-degree-of-freedom series vibration model and transfer function were established based on the system dynamic equation, considering the influence of the adhesive layer and hinge structure on the dynamic response effect of the hinged FBG acceleration sensor. The results showed that the response time of the sensor could significantly lag when the elastic modulus of the adhesive layer is lower than a certain critical value. The hinge thickness was found to be the most crucial parameter affecting the dynamic response performance of the sensor.
OPTICAL FIBER TECHNOLOGY
(2022)
Article
Engineering, Electrical & Electronic
Wei Fan et al.
Summary: This study proposes a fiber Bragg grating accelerometer based on a miniature slide rail for vibration monitoring. The accelerometer effectively reduces the impact of temperature and improves sensitivity. The experimental results show that the accelerometer has a broad frequency range and good performance.
IEEE SENSORS JOURNAL
(2022)
Article
Engineering, Electrical & Electronic
Yizhuo Li et al.
Summary: We propose and develop a high-sensitivity fiber Bragg grating accelerometer based on a flexible hinge, which significantly improves sensitivity and reliability by optimizing the grating structure. The results show that this structure can effectively detect vibrations in seismic exploration.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2022)
Article
Engineering, Electrical & Electronic
Toluwanimi O. Akinyemi et al.
Summary: Coronary heart disease is a major global health risk, and there is a need for innovative diagnosis and treatment methods. Fiber Bragg grating-based technique shows promise in enhancing robot-assisted cardiac procedures for CHD.
IEEE SENSORS LETTERS
(2022)
Article
Engineering, Electrical & Electronic
Han Song et al.
Summary: This paper presents a miniature vibration sensor based on a small-diameter fiber Bragg grating, which is optimized for size and sensitivity using a genetic algorithm and fabricated through metal 3D printing, demonstrating superior performance compared to ordinary FBG sensors.
IEEE SENSORS JOURNAL
(2021)
Article
Engineering, Electrical & Electronic
Li Xiong et al.
Summary: This paper proposed a three-axis vibration sensor based on fiber Bragg grating (FBG) with only five sensing elements, using a composite structure of cross-beam-type elastomer with multiplexed FBGs for sensing. The sensor showed low cross coupling and self temperature compensation capability. Through finite element analysis, the strain distribution and dynamic characteristics of the composite structure were studied, and vibration sensitivity tests validated its capability to measure three-axis vibration.
IEEE SENSORS JOURNAL
(2021)
Article
Engineering, Mechanical
Huaxian Wei et al.
Summary: This paper presents closed-form compliance equations for elliptic-revolute notch type multiple-axis flexure hinges undergoing small displacement in three-dimensional applications. Analytical compliance equations in six degrees of freedom are derived based on beam theory, with comparisons to existing compliance equations for revolute flexure hinges. Finite element analyses and numerical simulations verify the developed equations, establishing simplified coefficients between compliances of elliptic and circular-revolute flexure hinges. The presented compliance equations are helpful for designing spatial compliant mechanisms using elliptic-revolute flexure hinges.
MECHANISM AND MACHINE THEORY
(2021)
Article
Chemistry, Analytical
Zichuang Li et al.
Summary: A novel medium-frequency accelerometer, based on fiber Bragg grating and flexible hinges, has been proposed in this paper. The differential structure doubles the sensitivity of the sensor while avoiding temperature effects. The proposed sensor shows good temperature self-compensation function and lateral anti-interference capability.
Review
Instruments & Instrumentation
Yongxing Guo et al.
Summary: This study presents the state of the art for fiber Bragg grating (FBG) acceleration sensing technologies, focusing on the measurement dimension and sensing configuration principles. Current research is mainly concentrated on sensing methods, elastic structure design, and new information detection methods. Future trends may strengthen research on common single-mode fiber gratings, high sensitivity special fiber gratings, multi-core fiber gratings, and cost-effective demodulating equipment.
Review
Optics
Rui Min et al.
Summary: Optical fiber sensors have advantages such as resistance to electromagnetic interference, durability under extreme conditions, high transmission rate, small size, and flexibility, making them attractive for marine environment and structural health monitoring. They can be used for various sensing applications and are expected to have widespread use in marine research in the future.
OPTICS AND LASER TECHNOLOGY
(2021)
Article
Chemistry, Analytical
Hui Wang et al.
Summary: A new composite flexure hinge three-dimensional acceleration sensor was designed in this study, aiming to optimize structural parameters and coupling characteristics to achieve a small size and excellent performance for the sensor.
Article
Engineering, Electrical & Electronic
Hao Wu et al.
Summary: The Fiber Bragg grating (FBG) acceleration sensor, utilizing a double cantilever structure, demonstrates high natural frequency and sensitivity. After photoelectric demodulation, the sensor's performance is enhanced, showing good anti-interference in vibration measurement and temperature compensation. Its small size, thanks to light intensity demodulation technology, makes it ideal for practical integration and application in measurement scenarios.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2021)
Article
Engineering, Electrical & Electronic
Yadvendra Singh et al.
Summary: The article introduces an eFBG sensor coated with TiO2 to measure adulteration in petrochemicals, showing improved sensitivity and detection limits. It is a promising advancement for the petrochemical industry in detecting adulteration.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2021)
Article
Engineering, Electrical & Electronic
Kok-Sing Lim et al.
Summary: This article introduces a vibration measurement system based on low-frequency cantilever-based fiber Bragg grating accelerometers for a suspension bridge. The system was tested on a 110-meter-long suspension bridge, successfully identifying the natural vibration frequencies and corresponding mode shapes through spectral analysis. The results demonstrate the feasibility of using this system for dynamic frequency analysis and structural health monitoring of suspension bridges and similar civil structures.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2021)
Article
Engineering, Electrical & Electronic
Han Song et al.
IEEE SENSORS JOURNAL
(2020)
Article
Engineering, Electrical & Electronic
Bing Yan et al.
IEEE SENSORS JOURNAL
(2020)
Review
Engineering, Electrical & Electronic
Tianliang Li et al.
IEEE SENSORS JOURNAL
(2020)
Article
Engineering, Electrical & Electronic
Yiyang Zhuang et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2020)
Article
Multidisciplinary Sciences
Josu Amorebieta et al.
SCIENTIFIC REPORTS
(2020)
Review
Computer Science, Information Systems
Daniela Lo Presti et al.
Review
Biotechnology & Applied Microbiology
Jayoung Kim et al.
NATURE BIOTECHNOLOGY
(2019)
Article
Engineering, Electrical & Electronic
Rafael Pomorski Linessio et al.
IEEE SENSORS JOURNAL
(2019)
Article
Engineering, Electrical & Electronic
Li Wei et al.
IEEE SENSORS JOURNAL
(2019)
Article
Engineering, Electrical & Electronic
Kok-Sing Lim et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2019)
Article
Engineering, Mechanical
Lijian Li et al.
MECHANISM AND MACHINE THEORY
(2019)
Article
Engineering, Electrical & Electronic
Chaoyang Shi et al.
IEEE SENSORS JOURNAL
(2018)
Article
Engineering, Electrical & Electronic
Xiaofeng Wang et al.
IEEE SENSORS JOURNAL
(2018)
Article
Engineering, Electrical & Electronic
Jing Zhu et al.
IEEE SENSORS JOURNAL
(2017)
Article
Engineering, Electrical & Electronic
Jingjing Wang et al.
IEEE SENSORS JOURNAL
(2017)
Article
Engineering, Electrical & Electronic
Lei Qiu et al.
OPTICAL FIBER TECHNOLOGY
(2017)
Article
Engineering, Electrical & Electronic
Tianliang Li et al.
SENSORS AND ACTUATORS A-PHYSICAL
(2017)
Article
Automation & Control Systems
Fabrizio Marignetti et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2016)
Article
Engineering, Electrical & Electronic
Daing Hanum Abdul Munap et al.
IEEE SENSORS JOURNAL
(2015)
Article
Engineering, Electrical & Electronic
Shu Minakuchi et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY
(2015)
Article
Engineering, Electrical & Electronic
David Barrera et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY
(2015)
Article
Instruments & Instrumentation
Tianliang Li et al.
REVIEW OF SCIENTIFIC INSTRUMENTS
(2015)
Article
Chemistry, Analytical
Tianliang Li et al.
Article
Engineering, Electrical & Electronic
Paulo Fernando Costa Antunes et al.
IEEE SENSORS JOURNAL
(2012)
