☆ 4.5 Article

The Effect, Prediction, and Optimization of Fe Particles on Wear Behavior of Fe-ABS Composites Fabricated by Fused Deposition Modeling

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Textiles

Application of artificial neural network and full factorial method to predict the Poisson's ratio of double core helical auxetic yarn

Milad Razbin et al.

Summary: In this work, an experiment was conducted to investigate the effect of initial helical angle of wrap component, diameter ratio of components and modulus ratio of components on the Poisson's ratio of double core helical auxetic yarn (DC-HAY) using the full factorial method (FFM). Regression and artificial neural network (ANN) models were developed to predict the maximum NPR of DC-HAY, with the ANN model performing better. The sensitivity analysis showed that the modulus ratio of components is the most sensitive parameter affecting the output of the network.

JOURNAL OF THE TEXTILE INSTITUTE (2023)

Add to Collection

Article Materials Science, Characterization & Testing

A comprehensive analysis and prediction of the effect of groove shape and volume fraction of multi-walled carbon nanotubes on the polymer 3D-printed parts in the friction stir welding process

Mohammad Sadegh Javadi et al.

Summary: Polymers have wide applications, and fused deposition modeling (FDM) is a cost-effective technique for manufacturing polymer parts. However, the limitations of bed size in 3D printers restrict their applicability across industries. Friction stir welding (FSW) provides an excellent solution to join 3D-printed parts and overcome this limitation.

POLYMER TESTING (2023)

Add to Collection

Article Materials Science, Composites

Multi material 3D printing of PLA-PA6/TiO2polymeric matrix: Flexural, wear and morphological properties

Sudhir Kumar et al.

Summary: In this study, feedstock filaments of PLA and PA6/TiO(2) polymeric composite matrix were developed using a twin screw extrusion machine, and 3D printed functional prototypes with multiple materials were established using FDM. The optimized conditions for flexural strength and wear rate were determined, and the mechanical and morphological properties were analyzed using SEM and EDS.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

Surface modification of prototypes in fused deposition modelling using lapping process

Mohammad Vahid Ehteshamfar et al.

Summary: This study investigates the influence of lapping parameters on the surface roughness, material removal rate, and flexural strength of FDM manufactured ABS parts. The results demonstrate that increasing lapping time improves the surface roughness, while optimizing angular velocity and weight is necessary. Additionally, lapping significantly enhances the surface roughness of ABS samples and transforms the anisotropic behavior of additively manufactured parts to isotropic behavior without reducing the flexural strength. This study provides a new approach to improve the surface quality of FDM parts.

RAPID PROTOTYPING JOURNAL (2022)

Add to Collection

Article Engineering, Mechanical

Experimental study on tensile strength of copper microparticles filled polymer composites printed by fused deposition modelling process

Hamed Adibi et al.

Summary: The study found that layer thickness and filling pattern had the highest effects on the ultimate tensile strength of printed materials (pure and composite) in the FDM process. Additionally, the results showed that the ultimate tensile strength of the ABS composite containing 5% copper was nearly 12.3% higher than the pure ABS part.

RAPID PROTOTYPING JOURNAL (2022)

Add to Collection

Review Multidisciplinary Sciences

Extrusion-Based Technology in Additive Manufacturing: A Comprehensive Review

Abhishek Patel et al.

Summary: This paper presents the developments in extrusion-based 3D printing, addressing issues in filament and pellet-based printing. It suggests the development of a hybrid 3D printer to improve the material domain and utilize the advantages of both filament and pellet extrusion.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

3D printing parameters of acrylonitrile butadiene styrene polymer for friction and wear analysis using response surface methodology

Mohamad Nordin Mohamad Norani et al.

Summary: This study analyzed the coefficient of friction and wear properties of acrylonitrile butadiene styrene polymer through optimizing 3D printing parameters, finding that layer height has the most significant impact on coefficient of friction and wear rate.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Hardness, friction and wear characteristics of 3D-printed PLA polymer

Sahar Zhiani Hervan et al.

Summary: The study investigates the mechanical and tribological behaviors of parts manufactured with 3D printing methods, specifically looking at the effects of layer thickness and layer orientation on the hardness, friction coefficient, and wear properties of PLA samples printed using FDM. Results show a distinctive effect of layer orientation and thickness on the mechanical and friction characteristics of the samples.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

Add to Collection

Article Polymer Science

Influence of Solid Lubricant Addition on Friction and Wear Response of 3D Printed Polymer Composites

R. Keshavamurthy et al.

Summary: In this study, ABS composites filled with graphite powder were synthesized using FDM technique. The addition of graphite resulted in weight losses for FDM components and a decrease in coefficient of friction. The wear mechanisms in graphite filled ABS composites and ABS were extensively examined using microscopy techniques.

POLYMERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Impact and Shear Behavior of PLA/12%Cu Reinforced Composite Filament Printed at Different FDM Conditions

M. Venkata Pavan et al.

Summary: Researchers successfully used copper as a reinforcing component to produce PLA-Cu composite filament with 12% copper, conducting shear and impact tests. The FDM parameters have varying effects on impact load conditions, with nozzle temperature, bed temperature, and layer height being primary factors; while the shear test is primarily influenced by the layer thickness.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Role of butadiene content on tribological properties of polymeric components fabricated by FDM

Nagamani Bankupalli et al.

Summary: The study aimed to investigate the effect of butadiene content on the tribological properties of ABS specimens produced by FDM. Experiments showed that the wear rate of ABS is affected by the butadiene content and infill density of the specimens, with maximum wear rate observed in specimens with 20% infill and 20% butadiene content at 200 rpm 20 N load.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Tribological studies of 3D printed ABS and PLA plastic parts

Rahul Roy et al.

Summary: Engineering plastics are becoming increasingly important for various applications, especially with the advancement of additive manufacturing techniques. This paper focuses on producing samples using ABS and PLA thermoplastics in a 3D printer, and testing their friction and wear behavior in a multi tribo tester. The results analyze the effects of printing parameters on the tribological behavior of the 3D printed ABS and PLA samples.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Review Engineering, Mechanical

Fused deposition modelling: a review

Swapnil Vyavahare et al.

RAPID PROTOTYPING JOURNAL (2020)

Add to Collection

Article Engineering, Manufacturing

Surface modification of prototypes in fused filament fabrication using chemical vapour smoothing

Mulan Mu et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Automation & Control Systems

Effect of print orientation and bronze existence on tribological and mechanical properties of 3D-printed bronze/PLA composite

Muammel M. Hanon et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

On wear of 3D printed Al2O3 reinforced Nylon6 matrix based functional prototypes

Rupinder Singh et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Multidisciplinary Sciences

Hybrid Manufacturing and Mechanical Characterization of Cu/PLA Composites

Javaid Butt et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Influence of fused deposition modelling process parameters on wear strength of carbon fibre PLA

R. Srinivasan et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Appraisal of Mechanical and Tribological Properties on PA6-TiO2 Composites through Fused Deposition Modelling

R. Soundararajan et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of wear behavior of additively manufactured PC-ABS parts

Omar Ahmed Mohamed et al.

MATERIALS LETTERS (2018)

Add to Collection

Article Multidisciplinary Sciences

Comparison of wear behavior of ABS and ABS composite parts fabricated via fused deposition modelling

M. N. Sudin et al.

INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Processing and Wear Behaviour of 3D Printed PLA Reinforced with Biogenic Carbon

Ertan G. Ertane et al.

ADVANCES IN TRIBOLOGY (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Dry Sliding wear behavior of ABS Composites reinforced with nano Zirconia and PTFE

D. Amrishraj et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Tribological Properties of Fe-Nylon6 Composite Parts Prepared Using Fused Deposition Modelling

Harish Garg et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)

Add to Collection

Article Chemistry, Physical

Fabrication of Composite Filaments with High Dielectric Permittivity for Fused Deposition 3D Printing

Yingwei Wu et al.

MATERIALS (2017)

Add to Collection

Article Multidisciplinary Sciences

Effect of External Perimeter on Flexural Strength of FDM Build Parts

Swayam Bikash Mishra et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2017)

Add to Collection

Article Engineering, Mechanical

Wear behavior of FDM parts fabricated by composite material feed stock filament

Kamaljit Singh Boparai et al.

RAPID PROTOTYPING JOURNAL (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of processing parameters and graphite content on the tribological behaviour of 3D printed acrylonitrile butadiene styrene

M. Dawoud et al.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2015)

Add to Collection

Article Engineering, Manufacturing

Comparison of tribological behaviour for Nylon6-Al-Al2O3 and ABS parts fabricated by fused deposition modelling This paper reports a low cost composite material that is more wear-resistant than conventional ABS

Kamaljit Boparai et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2015)

Add to Collection

Proceedings Paper Automation & Control Systems

Study of friction and wear properties of ABS/Kaolin polymer composites using grey relational technique

J. Sudeepan et al.

2ND INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING, ICIAME 2014 (2014)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Experimental Investigation on Wear of FDM Processed Part

Anoop Kumar Sood et al.

MATERIALS AND MANUFACTURING TECHNOLOGIES XIV (2012)

Add to Collection

Article Engineering, Mechanical

Prediction and analysis of sliding wear performance of fused deposition modelling-processed ABS plastic parts

A. Equbal et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.