4.7 Article

Development of protein-polyphenol particles to stabilize high internal phase Pickering emulsions by polyphenols' structure

Related references

Note: Only part of the references are listed.
Article Chemistry, Applied

Emulsifying properties and oil-water interface properties of succinylated soy protein isolate: Affected by conformational flexibility of the interfacial protein

Ziteng Lian et al.

Summary: This study investigates the impact of succinylated modification on the emulsifying and oil-water interfacial properties of soy protein isolate (SPI) and analyzes the structure-effect mechanism between emulsifying properties and interfacial protein conformational flexibility. The results showed that succinylation improved the stability of the emulsion, enhanced interfacial protein adsorption, and reduced interfacial tension.

FOOD HYDROCOLLOIDS (2023)

Article Agriculture, Multidisciplinary

High Internal Phase Emulsions Stabilized with Polyphenol-Amyloid Fibril Supramolecules for Encapsulation and Protection of Lutein

Xue Leng et al.

Summary: This study successfully achieved high loading content of lutein in HIPEs, which improved the stability of lutein against UV radiation, heat, iron, and hydrogen peroxide. Microscopic and AFM images indicated that HIPEs stabilized by hybrid supramolecules had more densely and homogeneously dispersed oil droplets in their microstructure.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2022)

Article Chemistry, Applied

Improving foam performance using colloidal protein-polyphenol complexes: Lactoferrin and tannic acid

Taotao Dai et al.

Summary: This study investigates the interactions between bovine lactoferrin and tannic acid and their effects on foam properties. Hydrophobic forces are found to be the primary forces holding the complexes together. Additionally, the complex exhibits good foam stability but poor foamability, which is closely related to its interactions with polyphenols.

FOOD CHEMISTRY (2022)

Article Chemistry, Applied

High internal phase Pickering emulsions stabilized by cellulose nanocrystals for 3D printing

Tao Ma et al.

Summary: This study explored the utilization of highly concentrated oil-in-water emulsions to create edible 3D materials, successfully developing a high internal phase Pickering emulsion with excellent stability and printability. The research demonstrated the ability to 3D print high-resolution, high-fidelity shapes under specific conditions.

FOOD HYDROCOLLOIDS (2022)

Article Chemistry, Applied

High internal phase Pickering emulsions stabilized by tannic acid-ovalbumin complexes: Interfacial property and stability

Yang Chen et al.

Summary: This study used tannic acid to increase the interfacial stability of ovalbumin-stabilized high internal phase Pickering emulsions (HIPEs). It was found that tannic acid significantly improved the wettability of ovalbumin, resulting in better interfacial stability. HIPEs formed at pH 4.0 exhibited stronger gel network and higher viscosity, and showed good storage and freeze-thaw stability.

FOOD HYDROCOLLOIDS (2022)

Article Chemistry, Applied

Impact of high moisture contents on the structure and functional properties of pea protein isolate during extrusion

Bairu Zhang et al.

Summary: The study finds that extrusion can significantly decrease the solubility and foaming capacity of pea protein isolate, but it can improve the emulsifying activity and stability. Additionally, extrusion also affects the particle size and conformation of the protein.

FOOD HYDROCOLLOIDS (2022)

Article Food Science & Technology

Development and application of hydrophilic-hydrophobic dual-protein Pickering emulsifiers: EGCG-modified caseinate-zein complexes

Xiaojia Yan et al.

Summary: The functional performance of zein nanoparticles can be improved by complexing them with NaCas-EGCG conjugates, making them effective colloidal emulsifiers for the formation and stabilization of high internal phase emulsions (HIPEs).

FOOD RESEARCH INTERNATIONAL (2022)

Article Food Science & Technology

Recent advances in protein-polyphenol interactions focusing on structural properties related to antioxidant activities

Xiaohong Sun et al.

Summary: This review discusses the binding mechanism of proteins and polyphenols, as well as the factors influencing their interactions. It provides an overview of the effects of protein-polyphenol interactions on protein structure and antioxidant activities, and identifies future research direction for the development of food-based protein-polyphenol complexes as antioxidants.

CURRENT OPINION IN FOOD SCIENCE (2022)

Article Chemistry, Physical

Beyond particle stabilization of emulsions and foams: Proteins in liquid-liquid and liquid-gas interfaces

Fuchao Zhan et al.

Summary: This article discusses the use of solid particles in stabilizing emulsions and foams, highlighting the advantages of particle-stabilization over surfactant stabilization. It explains the internal mechanism and principle of particle-stabilized interfaces, as well as the important role of proteins in the interface. The article also proposes a new concept of edible capillary foam.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Applied

Fabricating hydrophilic fatty acid-protein particles to encapsulate fucoxanthin: Fatty acid screening, structural characterization, and thermal stability analysis

Donghui Li et al.

Summary: This study integrated dietary fatty acids into the protein-based encapsulation of carotenoids to enhance their absorption. The results showed that only a few tested fatty acids significantly promoted carotenoid absorption. Carotenoids and fatty acids were encapsulated using bovine serum albumin, resulting in nanoscale particles with high encapsulation efficiency and stability.

FOOD CHEMISTRY (2022)

Article Chemistry, Applied

Effect of molecular weight on the interfacial and emulsifying characteristics of rice glutelin hydrolysates

Zhenyu Yang et al.

Summary: This study investigated the molecular, interfacial, and emulsifying properties of rice glutelin with a degree of hydrolysis of 2% (DH2) to understand its structure-function relationships as an emulsifier. The results revealed that the large peptides in DH2 played a crucial role in forming and stabilizing emulsions. This knowledge could contribute to the utilization of hydrolyzed rice proteins as plant-based emulsifiers in the food and beverage industry.

FOOD HYDROCOLLOIDS (2022)

Article Chemistry, Applied

Relationships between the behavior of three different sources of pectin at the oil-water interface and the stability of the emulsion

Hui Niu et al.

Summary: In this study, the structural characterization and chemical compositions of three different pectins were studied. The results showed that sugar beet pectin (SBP) had higher protein contents, feruloylated groups, acetyl groups, and more hairy regions compared to apple pectin (AP) and citrus peel pectin (CPP). Molecular dynamics simulations revealed that the SBP formed a thick viscoelastic film on the oil-water interface. Further studies showed that under high-concentration and acidic conditions, pectin molecules were adsorbed in multiple layers at the oil-water interface, forming a thicker viscoelastic film, which was crucial for the long-term stability of pectin-stabilized emulsions.

FOOD HYDROCOLLOIDS (2022)

Article Chemistry, Applied

The interfacial behavior and long-term stability of emulsions stabilized by gum arabic and sugar beet pectin

Hui Niu et al.

Summary: This study compared the behavior of gum arabic (GA) and sugar beet pectin (SBP) at the oil-water interface and found that SBP-stabilized emulsions had advantages including smaller droplet size, higher viscosity, thicker and more elastic interfacial layer, and better long-term stability. The elasticity of the interfacial layer played a crucial role in the long-term stability of emulsions.

CARBOHYDRATE POLYMERS (2022)

Article Chemistry, Physical

Transparent high internal phase emulsion gels stabilized solely by proteins

Xu-Hui Chen et al.

Summary: Highly transparent and stable high internal phase emulsions (HIPEs) stabilized by protein, particularly globular proteins, were successfully prepared using a refractive index-matching technique. The presence of sucrose in the aqueous phase significantly improved emulsification performance and facilitated gel formation. This study provides valuable insights for fabricating biocompatible and highly transparent HIPE gels with potential applications in various fields.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Applied

High internal phase Pickering emulsions stabilized by co-assembled rice proteins and carboxymethyl cellulose for food-grade 3D printing

Ying Wan et al.

Summary: This study utilized high internal phase Pickering emulsions stabilized by protein-polysaccharide complexes as inks for food-grade three-dimensional printing (3DP), showing outstanding biphasic wettability and interfacial tension reduction. By tuning the properties of the complexes, the HIPPEs exhibited controllable injectability and printability during 3DP, with RCs stabilized HIPPEs showing favorable printing resolution, hardness, adhesiveness, and chewiness.

CARBOHYDRATE POLYMERS (2021)

Article Chemistry, Applied

Coalescence behavior of eco-friendly Pickering-MIPES and HIPEs stabilized by using bacterial cellulose nanofibrils

Qi Li et al.

Summary: O/W Pickering emulsions containing oil phase with different volume fractions were prepared using bacterial cellulose nanofibrils (BCNFs) alone. The emulsions exhibited excellent physical stability and low coalescence rate, with droplet size varying from 32 to 91 μm. Increasing particle contents decreased droplet size and enhanced emulsion stability.

FOOD CHEMISTRY (2021)

Article Agriculture, Multidisciplinary

Enhanced Interface Properties and Stability of Lignocellulose Nanocrystals Stabilized Pickering Emulsions: The Leading Role of Tannic Acid

Hongjie Dai et al.

Summary: Cellulose and tannin, as biodegradable biopolymers, have great potential in the food field due to their nutritional properties and biological activity. When combined, they can stabilize emulsions and improve their storage and environmental stabilities.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2021)

Article Chemistry, Physical

Microstructural and rheological investigation of upcycled metal-organic frameworks stabilized Pickering emulsions

Fabrice Lorignon et al.

Summary: This study focused on characterizing the microstructural and rheological properties of Pickering emulsions stabilized solely by Al-based MOFs particles. It was found that MIL-96(Al) efficiently stabilized paraffin-in-water emulsions and the behavior of excess particles in the continuous phase interacting with particles at the interface affected the flow properties of the emulsions. Further investigation into this behavior could be interesting for other MOF-stabilized emulsions.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Agriculture, Multidisciplinary

Recent Innovations in Emulsion Science and Technology for Food Applications

Long Bai et al.

Summary: Emulsion technology has been widely used in the food industry for decades, but recent advances in emulsion science have led to the development of advanced technologies such as Pickering emulsions, high internal phase emulsions (HIPEs), nanoemulsions, and multiple emulsions. These advancements have the potential to improve food quality, functionality, and sustainability by providing novel textural properties, functional attributes, and reduced-calorie options.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2021)

Article Agriculture, Multidisciplinary

Binding of Chloroquine to Whey Protein Relieves Its Cytotoxicity while Enhancing Its Uptake by Cells

Qimeng Yao et al.

Summary: Specific components in whey protein can interact with chloroquine to form complexes, reducing the gastrointestinal disorders caused by its oral administration. This study helps to understand the relationship between food and drugs.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2021)

Review Food Science & Technology

Protein nanoparticles for Pickering emulsions: A comprehensive review on their shapes, preparation methods, and modification methods

Ting Zhang et al.

Summary: Protein nanoparticles with different shapes are widely studied for their natural sources, non-toxicity, easy extraction, good surface activity, and emulsion stabilization abilities. The preparation methods can be classified into natural self-assembly, physical, chemical, and enzymatic methods, while the modification methods include physical mixing and chemical crosslinking at the oil/water interface. This research provides insight into the properties of protein nanoparticles and their potential in stabilizing Pickering emulsions.

TRENDS IN FOOD SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Medicinal

Complex Polysaccharide-Based Nanocomposites for Oral Insulin Delivery

Mar Collado-Gonzalez et al.

MARINE DRUGS (2020)

Article Chemistry, Multidisciplinary

High-Internal-Phase Pickering Emulsions Stabilized by Polymeric Dialdehyde Cellulose-Based Nanoparticles

Bo Pang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Chemistry, Applied

Tea polyphenols bind serum albumins:A potential application for polyphenol delivery

P. Chanphai et al.

FOOD HYDROCOLLOIDS (2019)

Article Chemistry, Physical

Cationic gemini surfactant with cleavable spacer: Emulsion stability

A. R. Tehrani-Bagha

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)

Article Materials Science, Biomaterials

Molecularly imprinted polymer based on MWCNT-QDs as fluorescent biomimetic sensor for specific recognition of target protein

Zhaoqiang Ding et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

Article Chemistry, Physical

Hydrophobin coated boehmite nanoparticles stabilizing oil in water emulsions

Martin Reger et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2012)