3.8 Article

Water vapor corrosion behavior and failure mechanism of air sprayed bi-layer Yb2Si2O7/SiC and tri-layer Yb2Si2O7/ (SiCw-Mullite)/SiC environmental barrier coating

Related references

Note: Only part of the references are listed.
Article Materials Science, Ceramics

Microstructure and corrosion behavior of in-situ grown Y3Si2C2 coated SiC fibers exposed to air and wet-oxygen at 1400 °C

Yang Li et al.

Summary: Y3Si2C2 ternary ceramics were in-situ grown on the surface of SiC fibers using molten salt method. The microstructures and oxidation/corrosion behavior of the coated fibers were investigated, showing successful growth of layered Y3Si2C2 slices and the formation of Y2Si2O7 and SiO2 during oxidation/corrosion in air and wet-oxygen at 1400°C.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Article Materials Science, Multidisciplinary

Construction of continuous heat conductive channel, a double harvest strategy to enhance thermal conductance and bending strength of C/SiC composites

Yunhai Zhang et al.

Summary: In this study, a method utilizing continuous wave laser machining and high thermal conductivity carbon fiber was developed to enhance the thermal conductivity and bending strength of C/SiC composites. The modified composites exhibited significantly higher thermal conductivity and bending strength, indicating promising applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Thermal response, oxidation and ablation of ultra-high temperature ceramics, C/SiC, C/C, graphite and graphite-ceramics

Xinghong Zhang et al.

Summary: This study systematically investigated the thermal response, oxidation, and ablation behavior of various thermal protection materials under strong heat flux, high enthalpy, and low-pressure environments. The results showed that factors such as thermal conductivity, volumetric heat capacity, catalytic efficiency, emissivity, and oxidation characteristics played important roles in the thermal response. The study also compared and analyzed the oxidation and ablation behaviors of these materials under extreme environments, and evaluated the effect of pre-treatment on the performance and reusability of thermal protection materials.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Engineering, Multidisciplinary

Damage behavior of atomic oxygen on a hafnium carbide-modified C/ SiC composite

Xingang Luan et al.

Summary: A ground-based evaluation was conducted on the resistance capability of a HfC-modified C/SiC composite against high-speed atomic oxygen in a low Earth orbit simulating system. Various analytical techniques were used to investigate the damage behaviors, products, and mechanisms of the material exposed to atomic oxygen. The study revealed that the material exhibited different responses in different areas, with HfC areas oxidizing preferentially and SiC areas showing lower surface damage.

COMPOSITES PART B-ENGINEERING (2021)

Article Materials Science, Ceramics

Bonding strength and thermal shock resistance of a novel bilayer (c-AlPO4-SiCw-mullite)/SiC coated carbon fiber reinforced CMCs

Pengju Chen et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Article Materials Science, Ceramics

Thermal shock resistance and bonding strength of tri-layer Yb2SiO5/mullite/Si coating on SiCf/SiC composites

Haitang Yang et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Coatings & Films

Oxidation and thermal cycling behavior of c-AlPO4 and SiC whisker co-modified mullite deposited on SiC-C/SiC composites

Dongmei Pu et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Materials Science, Coatings & Films

Oxidation properties of tri-layer ytterbium-disilicate/mullite/silicon-carbide environment barrier coatings for Cf/SiC composites

Pengju Chen et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Salt-fog corrosion behavior of C/SiC and its effect on ablation resistance

Su Cheng et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Materials Science, Ceramics

Degradation of ytterbium disilicate environmental barrier coatings in high temperature steam atmosphere

Nadia Rohbeck et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Materials Science, Ceramics

Microstructure and oxidation behavior of a novel bilayer (c-AlPO4-SiCw-mullite)/SiC coating for carbon fiber reinforced CMCs

Pengju Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Materials Science, Ceramics

Effect of processing on high-velocity water vapor recession behavior of Yb-silicate environmental barrier coatings

Emine Bakan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Materials Science, Multidisciplinary

Relationship between cracks and microstructures in APS YSZ coatings at elevated temperatures

Xuemei Song et al.

MATERIALS CHARACTERIZATION (2017)

Article Materials Science, Multidisciplinary

Oxidation and thermal shock resistant properties of Si/Yb2SiO5/NdMgA11O19 coating deposited on Cf/SiC composites

Cunyan Fan et al.

MATERIALS & DESIGN (2017)

Article Materials Science, Ceramics

Strength evolution of cyclic loaded LSI-based C/C-SiC composites

Yang Li et al.

CERAMICS INTERNATIONAL (2016)

Article Engineering, Multidisciplinary

The degradation behavior of UHTCs based coatings coated PIP-C/SiC composites in thermal cycling environment

Lu-ming Huang et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Materials Science, Coatings & Films

A self-healing environmental barrier coating: TiSi2-doped Y2Si2O7/barium strontium aluminosilicate coating

Yigao Chen et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Article Materials Science, Ceramics

Effect of SiC coating and heat treatment on the thermal radiation properties of C/SiC composites

Fuyuan Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Article Materials Science, Ceramics

Plasma spray deposition of tri-layer environmental barrier coatings

Bradley T. Richards et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Article Materials Science, Coatings & Films

Performance of thermally sprayed Si/mullite/BSAS environmental barrier coatings exposed to thermal cycling in water vapor environment

C. V. Cojocaru et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Article Materials Science, Multidisciplinary

Preparation and oxidation protection of CVD SiC/a-BC/SiC coatings for 3D C/SiC composites

Yongsheng Liu et al.

CORROSION SCIENCE (2009)

Article Materials Science, Ceramics

First-principles investigation on the corrosion resistance of rare earth disilicates in water vapor

Yiguang Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

Article Materials Science, Ceramics

High temperature water vapour corrosion of rare earth disilicates (Y,Yb,Lu)(2)Si2O7 in the presence of Al(OH)(3) impurities

N. Maier et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

Article Materials Science, Ceramics

Upper temperature limit of environmental barrier coatings based on mullite and BSAS

KN Lee et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)

Article Materials Science, Ceramics

Observations of accelerated silicon carbide recession by oxidation at high water-vapor pressures

KL More et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2000)