☆ 4.6 Review

Revolutionizing Healthcare Delivery Through Wireless Wearable Antenna Frameworks: Current Trends and Future Prospects

IEEE ACCESS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Electrical & Electronic

A Miniaturized Wearable Antenna With Five Band-Notched Characteristics for Medical Applications

Zitong Zhao et al.

Summary: This letter proposes a miniaturized wearable antenna with five band-notched characteristics. The antenna uses Rogers 5880 as the dielectric substrate and has a thickness of 0.508 mm. It features a microstrip line with an input impedance of 50 Omega and utilizes notch structures to create five notch bands. The overall size of the antenna is 30 x 25 x 0.508 mm(3) and it covers the entire UWB spectrum except for specific notch bands. By applying this antenna to a doctor's chest badge, it can reduce the need for card swiping by hand and prevent bacterial pollution.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Design of Low-profile ultrawideband Antennas for Body-Centric Communications using the FDTD method

Amine Mokraoui et al.

Summary: Low-profile coplanar waveguide antennas were designed considering body-centric communications requirements. A finite difference in time-domain-based programme was developed to account for dispersion in human tissues and antenna dielectric substrates. Two approaches were investigated, resulting in on-body suitable antennas with optimized bandwidth and ultrawideband antennas with minimized size for both on-body and off-body applications. Prototypes were built to validate the designs and the measured and simulated results showed coherence in return loss and radiation patterns. Based on the consulted bibliography, the smallest low-cost and low-profile omnidirectional wearable antenna was made, covering the entire UWB frequencies without special coaxial connectors or expensive dielectric substrates.

IET MICROWAVES ANTENNAS & PROPAGATION (2023)

Add to Collection

Article Engineering, Multidisciplinary

Multi-Band Flexible UWB Antenna for Flexible Electronics and Biomedical Applications

PRASANNA R et al.

International Journal for Multiscale Computational Engineering (2023)

Add to Collection

Review Computer Science, Artificial Intelligence

Remote patient monitoring using artificial intelligence: Current state, applications, and challenges

Thanveer Shaik et al.

Summary: The adoption of AI in healthcare is rapidly increasing, particularly in remote patient monitoring (RPM). This study provides a comprehensive review of RPM systems, exploring the use of advanced technologies and AI impact on RPM. The benefits and challenges of patient-centric RPM architectures enabled with IoT wearable devices, sensors, cloud, fog, edge, and blockchain technologies are discussed. The role of AI in RPM ranges from physical activity classification to chronic disease monitoring and vital signs monitoring. The review highlights the transformative potential of AI-enabled RPM in early detection of health deterioration and personalized patient monitoring.

WILEY INTERDISCIPLINARY REVIEWS-DATA MINING AND KNOWLEDGE DISCOVERY (2023)

Add to Collection

Article Computer Science, Information Systems

A Novel Design for Dual-Band Wearable Textile Eighth-Mode SIW Antennas

Giovanni Andrea Casula et al.

Summary: A novel wearable textile dual-band antenna configuration based on a substrate integrated waveguide (SIW) cavity is proposed in this paper. The antenna size is reduced to 1/8 of the full square cavity by exploiting the magnetic field symmetry of a square SIW cavity with an eighth-mode SIW configuration. The antenna operates in the UHF LoRa bands, covering both the European (863-870 MHz) and the North American (902-928 MHz) frequencies. The proposed antenna design is low-cost, compact, easy to fabricate, and exhibits good isolation and robustness with respect to the human body proximity. Numerical simulations and measurements show good agreement.

IEEE ACCESS (2023)

Add to Collection

Article Health Care Sciences & Services

Acceptability of wearable devices for measuring mobility remotely: Observations from the Mobilise-D technical validation study

Alison Keogh et al.

Summary: This study explored the acceptability of a wearable device for measuring mobility remotely and using digital tools to monitor health. The results showed that the device was comfortable, easy to use, and did not interfere with daily activities. Patients are open to using digital tools to bridge communication gaps with healthcare professionals. Rating: 8 out of 10.

DIGITAL HEALTH (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Screen-printed graphene tailoring the amplitude of guided wave in the rectangular waveguide for millimeter wave applications

Guoqiang He et al.

Summary: Graphene, used as an optoelectronic material, has unique advantages in amplitude and phase modulation of millimeter waves due to its high carrier mobility and broadband optoelectronic properties. By employing screen-printed graphene, we successfully manipulated the transmission of guided millimeter waves in a metallic waveguide. The effects of different patterns and sizes of screen-printed graphene on wave modulation were investigated, and it was found that the rhombus pattern exhibited the best performance in terms of broadband modulation and reflection loss.

DIAMOND AND RELATED MATERIALS (2023)

Add to Collection

Review Engineering, Electrical & Electronic

Chipless RFID Sensors for IoT Sensing and Potential Applications in Underground Mining-A Review

Likitha Lasantha et al.

Summary: Chipless RFID sensors have great potential for underground mining applications due to their ability to meet all the requirements of wireless communication, maintenance-free operation, long lifespan, and battery-free functioning in harsh underground environments. This article analyzes existing chipless RFID sensor technologies in the frequency domain to assess their suitability for applications including environmental condition monitoring, support system stability detection, and health monitoring of mining structures. Based on this analysis, a new classification based on sensing materials and intrinsic sensing parameters is presented, taking into account accuracy, performance, and readability using 3-D electromagnetic analysis software. The article concludes by identifying challenges for future research in the underground mining application domain of chipless RFID sensors.

IEEE SENSORS JOURNAL (2023)

Add to Collection

Article Engineering, Electrical & Electronic

A CRLH-TL Inspired Dual-Band Antenna With Polarization Diversity for Wrist-Worn Wireless Body Area Network Devices

Buyun Wang et al.

Summary: A wrist-worn dual-band smartwatch antenna with polarization diversity is proposed for smartwatches. The antenna operates at 2.4 and 5.8 GHz WLAN bands. By utilizing composite right-/left-handed transmission lines, the antenna achieves dual-band operation and low envelope correlation coefficients (ECCs) for polarization diversity. The measured performance of the antenna demonstrates good radiation characteristics and capacity with low specific absorption rate (SAR), making it a competitive candidate for wrist-worn wireless body area network (WBAN) devices.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable Rectenna With Integrated Miniaturized Feeding Slot and Rectifier Structure

Zhensheng Chen et al.

Summary: A low-cost hybrid textile/PCB wearable rectenna is designed for smart on-body applications. It integrates a textile patch antenna and a highly efficient rectifier on a small PCB substrate, with a miniaturized feeding aperture and an effective integration with the rectifier achieved using LC loading technique. The proposed integration approach reduces cost and simplifies the design, fabrication, and integration of the rectenna. The experimental rectenna prototype achieves a state-of-the-art power conversion efficiency (PCE) of 41% at an extremely low incident power density of 0.4 mu W/cm(2).

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Multifunctional Reconfigurable Wearable Textile Antennas Using Coplanar Reconfiguration Modules

Quoc Hung Dang et al.

Summary: A concept of multifunctional reconfigurable antennas for wearable applications is proposed, which consists of a textile circular patch with three varactor-loaded reconfigurable modules evenly distributed around its edge. Two designs, including a frequency and pattern-reconfigurable antenna and a frequency-and polarization-reconfigurable wearable textile antenna, are demonstrated. The antennas are fabricated and measured, confirming the operation concept.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Parachute shape ultra-wideband wearable antenna for remote health care monitoring

Vinod Kumar Singh et al.

Summary: Wireless body area networks (WBAN) are used for continuous monitoring of patients' health conditions, requiring different types of sensors. Wearable devices are increasingly used in the biomedical field, and a wearable antenna suitable for biomedical applications has been presented. The prototype antenna, made on a jeans textile substrate, has a measured impedance bandwidth of 5800 MHz and a peak gain of 4.5 dB. The antenna's performance on the human body and its radiation effect have been analyzed, showing promising results for wearable applications in remote health care monitoring.

INTERNATIONAL JOURNAL OF COMMUNICATION SYSTEMS (2023)

Add to Collection

Article Radiology, Nuclear Medicine & Medical Imaging

An investigation into the dependence of virtual observation point-based specific absorption rate calculation complexity on number of channels

Stephan Orzada et al.

Summary: This study aims to investigate the relationship between the number of channels and the computational burden for SAR calculation using virtual observation point-based SAR compression. The results show that the number of virtual observation points increases with the number of channels, and the computational burden increases exponentially with the number of channels. Therefore, it is necessary to use the best compression algorithms when dealing with high channel counts.

MAGNETIC RESONANCE IN MEDICINE (2023)

Add to Collection

Article Materials Science, Textiles

A design of dual band wearable MIMO antenna using Organza fabric for medical applications

Parisa Shirvani et al.

Summary: This research presents a novel wearable dual-band MIMO antenna that shows good conformal characteristics under bending conditions. The antenna's dielectric part is made from a flexible substrate using layered lightweight plain weave fabric Organza, which has a low weight and is flabby. The antenna utilizes a defected ground structure (DGS) and a recessed microstrip line feed to improve its parameters. Experimental results show that the antenna performs well under bending conditions, with a maximum measured gain of 7.8 dB at 2.4 GHz and 7.3 dB at 5 GHz.

JOURNAL OF THE TEXTILE INSTITUTE (2023)

Add to Collection

Review Chemistry, Analytical

Biocompatible and Long-Term Monitoring Strategies of Wearable, Ingestible and Implantable Biosensors: Reform the Next Generation Healthcare

Tian Lu et al.

Summary: Sensors are crucial in the diagnosis, treatment, and monitoring of diseases, as well as in observing and evaluating physiological activities. Biocompatible biosensors have rapidly developed to enable long-term and in-situ monitoring of physiological information. This review summarizes the ideal features and engineering strategies of wearable, ingestible, and implantable biocompatible biosensors, as well as their application in detecting various parameters and indicators.

SENSORS (2023)

Add to Collection

Review Chemistry, Analytical

A Review of Clothing Components in the Development of Wearable Textile Antennas: Design and Experimental Procedure

Aris Tsolis et al.

Summary: This review paper examines the use of clothing components in wearable antenna technology. Clothing components can serve as clothing items, antenna parts or radiators, and integration means for antennas into clothes. The paper categorizes and describes clothing components used in the development of wearable textile antennas, with a focus on designs, applications, and performance. It also presents a step-by-step design procedure, including detailed geometrical models and embedding clothing components into wearable antenna structures. Experimental procedures for wearable textile antennas, specifically those using clothing components, are discussed. The potential of textile technology in wearable antennas through the application of clothing components is outlined.

SENSORS (2023)

Add to Collection

Review Chemistry, Analytical

5G Technology in Healthcare and Wearable Devices: A Review

Delshi Howsalya Devi et al.

Summary: The use of 5G technology in wearable devices and healthcare can reduce the cost of diagnosing and preventing diseases, and save patient lives. It has the potential to directly impact clinical decision making, improve patient rehabilitation, and continuously monitor human physical activity. The widespread adoption of 5G technology by healthcare systems enables sick people to access specialists and receive correct care more conveniently.

SENSORS (2023)

Add to Collection

Article Multidisciplinary Sciences

Wearable coupled-quarter-mode SIW antenna platform with hybrid kinetic and ambient-light energy harvesting

Jelle Jocque et al.

Summary: Textile antenna systems and platforms play a crucial role in smart fabric interactive textile (SFIT) systems, requiring energy-efficient, low-profile designs with stable wireless body-centric communication links. This study proposes a wearable coupled-quarter-mode (coupled-QM) substrate-integrated waveguide (SIW) antenna with seamlessly integrated hybrid kinetic and ambient-light energy harvesters. The antenna platform, made of protective rubber foam and copper taffeta, can be seamlessly integrated into protective clothing. Experimental results demonstrate that the integrated antenna platform achieves a wide impedance bandwidth, high radiation efficiency, and maximum gain. Moreover, it can harvest a significant amount of power when worn around a person's wrist in an illuminated room.

SCIENTIFIC REPORTS (2023)

Add to Collection

Article Engineering, Electrical & Electronic

A novel wearable monopole antenna with controlled SAR using metamaterial

K. Ramasamy et al.

Summary: This article presents a flexible wearable KIT monopole antenna for biomedical application, utilizing a metamaterial unit cell to improve performance. The antenna and metamaterial are fabricated on a polydimethylsiloxane substrate and operate at 2.45 GHz. The integration of the metamaterial improves gain and reduces SAR, with an overall dimension of 49 x 49 x 19 mm(3). The antenna is safe for biomedical applications, as shown by the fabricated prototype.

INTERNATIONAL JOURNAL OF MICROWAVE AND WIRELESS TECHNOLOGIES (2023)

Add to Collection

Article Chemistry, Analytical

Evaluation of Polydimethylsiloxane (PDMS) as a Substrate for the Realization of Flexible/Wearable Antennas and Sensors

Praveen Kumar Sharma et al.

Micromachines (2023)

Add to Collection

Article Chemistry, Analytical

Circularly Polarized Textile Sensors for Microwave-Based Smart Bra Monitoring System

Dalia N. N. Elsheakh et al.

Summary: This paper introduces a conformal and biodegradable circularly polarized microwave sensor (CPMS) for medical applications. The proposed sensor can be used in breast cancer detection and wireless body area networks. It features a wideband circularly polarized textile antenna with a slot to extend the bandwidth from 1.8 to 8 GHz.

MICROMACHINES (2023)

Add to Collection

Article Computer Science, Information Systems

Analysis and Design of a MuSiC-Based Angle of Arrival Positioning System

Marco Gunia et al.

Summary: In this research article, a concept for a secondary RADAR angle of arrival based system with cooperative targets is investigated. The system uses Multiple Signal Classification (MuSiC) to determine the angles of incidence and is evaluated through simulations and by developing hardware, firmware, and software. Novel methods for obtaining incident angles from the spectrum are proposed, along with algorithms for computing the final position. Experimental results show improved positioning accuracy compared to classical MuSiC estimation in both outdoor and indoor environments.

ACM TRANSACTIONS ON SENSOR NETWORKS (2023)

Add to Collection

Article Engineering, Electrical & Electronic

A small wideband inverted L-shaped flexible antenna for sub-6 GHz 5G applications

Neeta Kulkarni et al.

Summary: This manuscript presents the design and examination of a flexible inverted L-shaped antenna connected with a circular ring. The antenna shows satisfactory performance in terms of isolation and ECC, making it suitable for 5G MIMO applications.

AEU-INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATIONS (2023)

Add to Collection

Review Computer Science, Information Systems

Leveraging 6G, extended reality, and IoT big data analytics for healthcare: A review

Hafiz Farooq Ahmad et al.

Summary: This research paper provides a detailed review of how healthcare systems have utilized technologies based on 6G, XR, and IoT big data analytics for effective and scalable healthcare services provisioning. It highlights how future healthcare systems can synergistically leverage these technologies and provides insightful taxonomies based on different parameters, along with a description of current challenges and future directions.

COMPUTER SCIENCE REVIEW (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Aperture-Coupled Beam-Scanning Patch Array With Parasitic Elements Using a Reconfigurable Series-Fed Phase-Shifting Structure

Wenyi Shao et al.

Summary: In this letter, a reconfigurable series-fed phase-shifting structure with a movable metal plate for active millimeter wave beam-scanning application is proposed. The proposed structure can be equivalent to a certain number of phase shifters in the series-fed network. It can be easily controlled with only one metal plate, simplifying the design of control system for phase shifters and reducing the cost. A prototype of a 1-D aperture-coupled patch array with parasitic elements at 28 GHz is designed, fabricated, and measured to verify the performance of the proposed phase-shifting structure. The measurement results demonstrate the 1-D beam-steering capability with a maximum steering angle of approximately 22 degrees at the H-plane, indicating great potential for developing a simple control and cost-effective active phased array for millimeter wave wireless power transmission application.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Metasurface-Assisted Broadband Compact Dual-Polarized Dipole Antenna for RF Energy Harvesting

Sarath Sankar Vinnakota et al.

Summary: This study explores a cost-effective dual-polarized broadband dipole antenna for RF energy harvesting. The 2 x 2 antenna arrangement over an artificial magnetic conductor surface allows for capturing RF energy from both horizontal and vertical polarizations in a multiple-input-multiple-output environment. The antenna is integrated with a single-series rectifier circuit to power an LED, demonstrating the process of capturing RF energy.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2023)

Add to Collection

Proceedings Paper Engineering, Electrical & Electronic

Frequency-Reconfigurable UHF Wearable Textile Antenna for RFID Applications

Quoc Hung Dang et al.

Summary: This paper presents a frequency-reconfigurable wearable textile antenna operating in the UHF band for RFID applications. The antenna achieves a wide frequency tuning range of 27.6% covering the 0.923 GHz ISM radio bands. The design concept is validated through manufacturing and experimental characterization of the proposed antenna.

2023 5TH AUSTRALIAN MICROWAVE SYMPOSIUM, AMS (2023)

Add to Collection

Article Computer Science, Information Systems

PoxNet22: A Fine-Tuned Model for the Classification of Monkeypox Disease Using Transfer Learning

Farhana Yasmin et al.

Summary: Officials in public health are concerned about a new monkeypox outbreak, and the importance lies in accurately diagnosing the disease before it spreads. Machine learning technology could potentially assist in this process. This study aims to develop a machine learning and image processing model for diagnosing monkeypox and has achieved promising results.

IEEE ACCESS (2023)

Add to Collection

Review Computer Science, Information Systems

Design, Analysis and Applications of Wearable Antennas: A Review

Usman Ali et al.

Summary: Wearable antennas are vital for Body Centric Communication (BCC) in various fields. Due to their close proximity to the human body, their performance is influenced by the coupling and absorption of human body tissues. Designing wearable antennas becomes challenging considering textile materials, high conductivity materials, and deformation scenarios. To enhance their performance and reduce SAR, metamaterial surfaces are introduced.

IEEE ACCESS (2023)

Add to Collection

Article Engineering, Electrical & Electronic

A Wideband Metasurface Antenna With Dual-Band Dual-Mode for Body-Centric Communications

Guo-Ping Gao et al.

Summary: This paper proposes a wideband wearable metasurface antenna that can operate in dual-mode (on-body and off-body mode) in the 2.45 and 5 GHz WBAN bands. By selecting appropriate modes and tuning frequencies, the antenna achieves good performance suitable for wearable applications.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Multi-Modal Physiological Signals Based Squeeze-and-Excitation Network With Domain Adversarial Learning for Sleep Staging

Ziyu Jia et al.

Summary: This study proposes a sleep staging method based on multi-modal physiological signals, which captures the features of electroencephalogram (EEG) and electrooculogram (EOG) and extracts subject-invariant sleep features through adaptive utilization of multi-modal signals and domain adversarial learning. Experimental results demonstrate that this method outperforms baseline models in sleep staging tasks.

IEEE SENSORS JOURNAL (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A miniaturized wideband wearable antenna with circular polarization for medical application

Sedigheh Vaezi et al.

Summary: This paper presents a wearable antenna for medical application with circular polarization, high gain, and low-profile features. The antenna is fabricated on a flexible substrate using frequency selective surface technology to achieve beamforming of radiation patterns at different frequencies, maintaining SAR limitations and dual-mode operation. The antenna provides over 75% measured bandwidth around the 2.4 GHz ISM band and a maximum circular gain better than 7.9 dB, suitable for on- and off-body applications with frequency sharing techniques.

AEU-INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A low profile artificial magnetic conductor based tri-band antenna for wearable applications

Jianjun Lai et al.

Summary: The wearable flexible antenna proposed in this study, integrated with artificial magnetic conductor, operates at multiple frequency bands and has good conformity and performance for wireless body area network applications.

MICROWAVE AND OPTICAL TECHNOLOGY LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Standalone stretchable RF systems based on asymmetric 3D microstrip antennas with on-body wireless communication and energy harvesting

Senhao Zhang et al.

Summary: This study introduces stretchable microstrip antennas with varying 3D configurations to improve on-body radiation performance. Compared to 2D antennas, these antennas exhibit better stretchability and peak gain, allowing for increased wireless transmission distance and charging rate.

NANO ENERGY (2022)

Add to Collection

Article Multidisciplinary Sciences

Dual-functional communication and sensing antenna system

Tanjir Alam et al.

Summary: In this article, a dual functional antenna system is proposed for both communication and sensing applications. The system uses a frequency selective multipath filter to achieve dual functionality and minimize interference between the antennas. The performance of the antenna sensor is demonstrated through experiments on different substrates and ice/water detection.

SCIENTIFIC REPORTS (2022)

Add to Collection

Review Computer Science, Information Systems

Key Factors in the Implementation of Wearable Antennas for WBNs and ISM Applications: A Review WBNs and ISM Applications: A Review

Fatimah Fawzi Hashim et al.

Summary: The development of on-body antennas has become increasingly important in wireless technology, particularly for applications that require close contact with the human body. These antennas outperform normal antennas and have characteristics such as flexibility, reflection coefficient, bandwidth, directivity, gain, radiation, specific absorption rate (SAR), and efficiency. Improvements like band-gap structure and artificial magnetic conductors (AMC) and (DGS) have been incorporated to provide isolation from the human body and reduce SAR.

ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Textile Fixed-Frequency Pattern-Reconfigurable Coupled-Mode Substrate-Integrated Cavity Antenna

Jie Cui et al.

Summary: A textile fixed-frequency pattern-reconfigurable coupled-mode substrate-integrated cavity (CMSIC) antenna is designed for wearable applications. By adding metallic snap buttons as switches at the radiation apertures, the resonance frequencies of the odd and even modes can be changed, leading to the reconfiguration of mode and pattern.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Impact of Various Wearability Conditions on the Performances of Meander-Line Z-Shaped Embroidered Antenna

Adnan E. Ali et al.

Summary: This study aims to design a fully-textile wearable antenna for radio-frequency harvesting and short-range communication. The antenna was fabricated using silver conductive threads and embroidery technique on a cotton textile. The performance of the antenna was evaluated under various conditions, and the results are crucial for designing future wearable antennas in the concept of the Internet of bodies.

INTERNATIONAL JOURNAL OF ANTENNAS AND PROPAGATION (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Wearable and Flexible Multifunctional Sensor Based on Laser- Induced Graphene for the Sports Monitoring System

Tahir Raza et al.

Summary: This work presents the design of wearable graphene-based strain and pressure sensors by converting polyimide into laser-induced graphene. The sensors perform multiple functions in volleyball sportswear and assist athletes in training while helping coaches formulate competition strategies.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Computer Science, Information Systems

A Reconfigurable Metal Rim Antenna With Smallest Clearance for Smartphone Applications

Lyuwei Chen et al.

Summary: A reconfigurable metal rim antenna with a small clearance and compact structure for 4G/5G smartphones is proposed in this paper. The theory of characteristic modes is applied to analyze the eigenmodes of the antenna, and a prototype antenna of the optimized design was fabricated and tested for performance in different frequency bands.

IEEE ACCESS (2022)

Add to Collection

Review Materials Science, Textiles

Electro-textile wearable antennas in wireless body area networks: materials, antenna design, manufacturing techniques, and human body consideration-a review

Bahaa Almohammed et al.

Summary: The latest progress in wearable antennas made of various fabrics has shown wide applications in different fields. The focus is on materials properties, criteria, and manufacturing techniques for electro-textiles research. This review highlights the importance of material selection and performance of antennas on WBAN objects.

TEXTILE RESEARCH JOURNAL (2021)

Add to Collection

Review Materials Science, Textiles

Review of the end-of-life solutions in electronics-based smart textiles

Paula Veske et al.

Summary: Research and development in the smart textile field is rapidly expanding, with a focus on integrating electronics into textiles. However, this merging of different fields has led to complex sustainability and recycling issues. Current literature on end-of-life solutions for electronic textiles is limited, highlighting a lack of legislation and practical solutions in this multidisciplinary field.

JOURNAL OF THE TEXTILE INSTITUTE (2021)

Add to Collection

Article Multidisciplinary Sciences

Reduction of 5G cellular network radiation in wireless mobile phone using an asymmetric square shaped passive metamaterial design

Tayaallen Ramachandran et al.

Summary: This study demonstrates the feasibility of using metamaterial design to reduce absorption of 5G electromagnetic energy in human head tissue. Through numerical simulation and comparison of measured data, the results show strong SAR reduction effects, indicating the promising potential of the proposed metamaterial design in the field of telecommunications.

SCIENTIFIC REPORTS (2021)

Add to Collection

Review Engineering, Biomedical

MXene in the lens of biomedical engineering: synthesis, applications and future outlook

Adibah Zamhuri et al.

Summary: MXene is a multifaceted 2D material with unique physicochemical properties and biocompatibility, suitable for applications in biomedicine and biotechnology such as drug delivery and bio-imaging.

BIOMEDICAL ENGINEERING ONLINE (2021)

Add to Collection

Article Chemistry, Analytical

Design and Evaluation of a Flexible Dual-Band Meander Line Monopole Antenna for On- and Off-Body Healthcare Applications

Shahid M. Ali et al.

Summary: This article evaluates the performance of a flexible dual-band planar antenna when worn by different subjects, showing good stability and reliability, maintaining strong communication capabilities under various human body conditions.

MICROMACHINES (2021)

Add to Collection

Article Engineering, Biomedical

Multi-View Spatial-Temporal Graph Convolutional Networks With Domain Generalization for Sleep Stage Classification

Ziyu Jia et al.

Summary: Sleep stage classification is crucial for assessing sleep quality and diagnosing diseases, but challenges remain in effectively utilizing brain signals, handling individual differences, and ensuring interpretability in deep learning methods. A proposed MSTGCN model addresses these challenges by combining spatial-temporal feature extraction, attention mechanism, and domain generalization, outperforming previous baseline models on public datasets.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Very-Low-Profile Grounded Coplanar Waveguide-Fed Dual-Band WLAN Slot Antenna for On-Body Antenna Application

Kin-Lu Wong et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2020)

Add to Collection

Article Optics

Graphene patch antennas with different substrate shapes and materials

Md Abdul Kaium Khan et al.

OPTIK (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Dual-Polarized Embroidered Textile Armband Antenna Array With Omnidirectional Radiation for On-/Off-Body Wearable Applications

Chun-Xu Mao et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2020)

Add to Collection

Article Telecommunications

Design of Metamaterial Antenna for 2.4 GHz WiFi Applications

G. Geetharamani et al.

WIRELESS PERSONAL COMMUNICATIONS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Analyzing patient health information based on IoT sensor with AI for improving patient assistance in the future direction

H. Fouad et al.

MEASUREMENT (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A Broadband Low-Profile Dual-Linearly Polarized Dipole-Driven Metasurface Antenna

Guo Liu et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable Dual-Band and Dual-Polarized Textile Antenna for On- and Off-Body Communications

Hongcai Yang et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Recent advances on the crystallization engineering of energetic materials

Xue-Xue Zhang et al.

ENERGETIC MATERIALS FRONTIERS (2020)

Add to Collection

Article Computer Science, Information Systems

Wideband Wearable Antenna for Biomedical Telemetry Applications

Amor Smida et al.

IEEE ACCESS (2020)

Add to Collection

Review Chemistry, Physical

A review of flexible perovskite oxide ferroelectric films and their application

Wenxiu Gao et al.

JOURNAL OF MATERIOMICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A Wearable PIFA With an All-Textile Metasurface for 5 GHz WBAN Applications

Guo-Ping Gao et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2019)

Add to Collection

Review Computer Science, Information Systems

Planar Textile Off-Body Communication Antennas: A Survey

Ruben Del-Rio-Ruiz et al.

ELECTRONICS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

A Wearable Dual-Band Low Profile High Gain Low SAR Antenna AMC-Backed for WBAN Applications

Mohamed El Atrash et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Metamaterial inspired fabric antenna for wearable applications

Adel Y. I. Ashyap et al.

INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Washing Durability of PDMS-Conductive Fabric Composite: Realizing Washable UHF RFID Tags

Roy B. V. B. Simorangkir et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2019)

Add to Collection

Article Computer Science, Information Systems

A Low Profile, Dual-band, Dual Polarized Antenna for Indoor/Outdoor Wearable Application

Kashif Nisar Paracha et al.

IEEE ACCESS (2019)

Add to Collection

Review Construction & Building Technology

Critical evaluation of off-site construction research: A Scientometric analysis

M. Reza Hosseini et al.

AUTOMATION IN CONSTRUCTION (2018)

Add to Collection

Article Engineering, Electrical & Electronic

A Compact and Low-Profile MIMO Antenna Using a Miniature Circular High-Impedance Surface for Wearable Applications

Dingliang Wen et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2018)

Add to Collection

Article Engineering, Electrical & Electronic

On-Body Transmission Performance of a Novel Dual-Mode Wearable Microstrip Antenna

Carlos Mendes et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Noninvasive Internal Body Temperature Tracking With Near-Field Microwave Radiometry

Parisa Momenroodaki et al.

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2018)

Add to Collection

Article Computer Science, Information Systems

A Low Profile UWB Antenna for WBAN Applications

Deqiang Yang et al.

IEEE ACCESS (2018)

Add to Collection

Article Computer Science, Information Systems

Inverted E-Shaped Wearable Textile Antenna for Medical Applications

Adel Y. I. Ashyap et al.

IEEE ACCESS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Compact Wideband Circularly Polarized Microstrip Antenna Array for 45 GHz Application

Zheng Gan et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Compact and broadband antenna using double-negative transmission line metamaterial

M. M. Islam et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable Textile Antennas Examining the effect of bending on their performance

David Ferreira et al.

IEEE ANTENNAS AND PROPAGATION MAGAZINE (2017)

Add to Collection

Article Engineering, Electrical & Electronic

EBG-Backed Flexible Printed Yagi-Uda Antenna for On-Body Communication

B. Sakthi Abirami et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable Button Antenna for Dual-Band WLAN Applications With Combined on and off-Body Radiation Patterns

Hu Xiaomu et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Compact EBG-Backed Planar Monopole for BAN Wearable Applications

Muhammad Ali Babar Abbasi et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable Antennas for Remote Health Care Monitoring Systems

Laura Corchia et al.

INTERNATIONAL JOURNAL OF ANTENNAS AND PROPAGATION (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Design methodology for wearable antenna on artificial magnetic conductor using stretch conductive fabric

M. Mantash et al.

ELECTRONICS LETTERS (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable Shell Antenna for 2.4 GHz Hearing Instruments

Andrea Ruaro et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2016)

Add to Collection

Article Engineering, Manufacturing

Wearable AMC Backed Near-Endfire Antenna for On-Body Communications on Latex Substrate

Kush Agarwal et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Engineering, Electrical & Electronic

A Low-Profile IR-UWB Antenna With Ring Patch for WBAN Applications

Wonhong Jeong et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Dual-Band EBG Integrated Monopole Antenna Deploying Fractal Geometry for Wearable Applications

Sangeetha Velan et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

A Miniaturized Patch Antenna by Using a CSRR Loading Plane

Mehrab Ramzan et al.

INTERNATIONAL JOURNAL OF ANTENNAS AND PROPAGATION (2015)

Add to Collection

Article Chemistry, Physical

A Miniaturized Antenna with Negative Index Metamaterial Based on Modified SRR and CLS Unit Cell for UWB Microwave Imaging Applications

Md. Moinul Islam et al.

MATERIALS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable dual-band composite right/left-handed waveguide textile antenna for WLAN applications

Sen Yan et al.

ELECTRONICS LETTERS (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Dual-band dual-mode patch antenna for on-on-off WBAN applications

Youngtaek Hong et al.

ELECTRONICS LETTERS (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Compact Half Diamond Dual-Band Textile HMSIW On-Body Antenna

Sam Agneessens et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2014)

Add to Collection

Article Engineering, Electrical & Electronic

A Compact, Low-Profile Metasurface-Enabled Antenna for Wearable Medical Body-Area Network Devices

Zhi Hao Jiang et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Uniformly connected conductive networks on cellulose nanofiber paper for transparent paper electronics

Hirotaka Koga et al.

NPG ASIA MATERIALS (2014)

Add to Collection

Article Biology

Numerical assessment of the performance of a scalp-implantable antenna: Effects of head anatomy and dielectric parameters

Asimina Kiourti et al.

BIOELECTROMAGNETICS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Novel Preprocessing Techniques for Accurate Microwave Imaging of Human Brain

S. Mustafa et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Dual-Band Circularly Polarized Rotated Patch Antenna With a Parasitic Circular Patch Loading

Changjiang Deng et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Dual-Frequency Technique for Assessment of Cardiopulmonary Effective RCS and Displacement

John E. Kiriazi et al.

IEEE SENSORS JOURNAL (2012)

Add to Collection

Article Engineering, Electrical & Electronic

On-body performance of dual-band textile antennas

S. J. Boyes et al.

IET MICROWAVES ANTENNAS & PROPAGATION (2012)

Add to Collection

Review Chemistry, Analytical

Textile Materials for the Design of Wearable Antennas: A Survey

Rita Salvado et al.

SENSORS (2012)

Add to Collection

Article Engineering, Biomedical

Mechanically Flexible Wireless Multisensor Platform for Human Physical Activity and Vitals Monitoring

Yindar Chuo et al.

IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Reversibly Deformable and Mechanically Tunable Fluidic Antennas

Ju-Hee So et al.

ADVANCED FUNCTIONAL MATERIALS (2009)

Add to Collection

Article Medicine, General & Internal

Preferred Reporting Items for Systematic Reviews and Meta-Analyses: The PRISMA Statement

David Moher et al.

ANNALS OF INTERNAL MEDICINE (2009)

Add to Collection

Article Physics, Applied

Liquid metal stretchable unbalanced loop antenna

Shi Cheng et al.

APPLIED PHYSICS LETTERS (2009)

Add to Collection

Article Engineering, Electrical & Electronic

Dual-Band Wearable Textile Antenna on an EBG Substrate

Shaozhen Zhu et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2009)

Add to Collection

Article Engineering, Electrical & Electronic

Antennas for Over-Body-Surface Communication at 2.45 GHz

Gareth A. Conway et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2009)

Add to Collection

Article Engineering, Electrical & Electronic

A Textile Antenna for Off-Body Communication Integrated Into Protective Clothing for Firefighters

Carla Hertleer et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2009)

Add to Collection

Review Engineering, Electrical & Electronic

Review of Computational Anthropomorphic Anatomical and Physiological Models

Habib Zaidi et al.

PROCEEDINGS OF THE IEEE (2009)

Add to Collection

Article Medicine, Research & Experimental

Biological effects from electromagnetic field exposure and public exposure standards

Lennart Hardell et al.

BIOMEDICINE & PHARMACOTHERAPY (2008)

Add to Collection

Article Engineering, Electrical & Electronic

Evaluations of specific absorption rate and temperature increase within pregnant female models in magnetic resonance imaging birdcage coils

Dagang Wu et al.

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2006)

Add to Collection

Article Engineering, Manufacturing

Design and characterization of purely textile patch antennas

Ivo Locher et al.

IEEE TRANSACTIONS ON ADVANCED PACKAGING (2006)

Add to Collection

Article Engineering, Electrical & Electronic

Broadband circularly polarized printed-spiral-strip antenna for 5-GHz WLAN operation

CW Su et al.

MICROWAVE AND OPTICAL TECHNOLOGY LETTERS (2004)

Add to Collection

Article Engineering, Electrical & Electronic

Study of the tissue volume for spatial-peak mass-averaged SAR evaluation

AK Lee et al.

IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.