☆ 4.6 Article

SnSe2/Ag2Se heterostructures with an accumulation layer for rapid and sensitive detection of NO2

NEW JOURNAL OF CHEMISTRY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Electrical & Electronic

Black Phosphorus Nanosheets Decorated Multiscale Zinc Ferrite Spheres Toward Swift and Humidity-Tolerant Breath Acetone Sensing

Hongchao Zhao et al.

Summary: This study utilized chemoresistive MEMS acetone sensors with a sensing layer of black phosphorus (BP) nanosheets-modified zinc ferrite spheres for sensitive and swift acetone detection. The sensors exhibited excellent selectivity, repeatability, and long-term stability, as well as twofold response enhancement and stronger sensitivity compared to pure zinc ferrite analog.

IEEE SENSORS JOURNAL (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Wide Range Strain Distributions on the Electrode for Highly Sensitive Flexible Tactile Sensor with Low Hysteresis

Cuiyuan Liang et al.

Summary: In this study, elastomeric micropyramid arrays with different heights were designed to redistribute strain and address the challenges of achieving high sensitivity and low hysteresis in piezoresistive tactile sensors. Single-walled carbon nanotubes were mixed into the micropyramids to compensate for conductivity loss and increase adhesion strength. The resulting sensor exhibited high sensitivity (1.28 x 106 kPa-1) and a broad detection range (4.51-54837.06 Pa) due to the synergistic effects of percolation, tunneling, and multistage strain distribution. Successful applications in health monitoring and human-machine interaction were demonstrated.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Dual Improvement in Sensitivity and Humidity Tolerance of a NO2 Sensor Based on 3-Aminopropyltriethoxysilane Self-Assembled Monolayer-Functionalized SnSe2 for Explosive Photolysis Gas Detection

Xuezheng Guo et al.

Summary: Explosives are often stored in low temperature and high humidity conditions to prevent electrostatic sparking, which hinders gas detection. This study synthesized APTES-SnSe2 nanosheets for a room-temperature NO2 sensor with improved sensitivity and humidity tolerance. The stronger adsorption of APTES molecules to NO2 molecules and stable adsorption energy in the presence of H2O contribute to the enhanced sensing capabilities. The APTES-SnSe2 sensor accurately detects photolytic gases from trace nitro explosives at room temperature and various humidity levels.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Chemistry, Analytical

Two-dimensional black phosphorus/tin oxide heterojunctions for high-performance chemiresistive H2S sensing

Yong Zhou et al.

Summary: Hydrogen sulfide (H2S) emission and decomposition of sulfur-containing organic matter have a significant impact on human health and the environment. To address this issue, researchers developed a H2S sensor using two-dimensional tin oxide (SnO2) nanosheets decorated with thin black phosphorus (BP) as the sensing layer. The BP-SnO2 sensor demonstrated higher sensitivity, lower operating temperature, faster response/recovery speeds, and better stability compared to pure SnO2 sensors. This study highlights the potential of BP nanosheets in gas sensing and provides a new strategy for trace H2S sensing.

ANALYTICA CHIMICA ACTA (2023)

Add to Collection

Article Engineering, Multidisciplinary

An overview on room-temperature chemiresistor gas sensors based on 2D materials: Research status and challenge

Ziying Wang et al.

Summary: This paper discusses the advances and challenges in gas sensors based on two-dimensional materials (2DMs). It describes the electronic structure, physical and chemical properties, and semiconductor properties of 2DMs, as well as the synthesis methods and gas-sensitive properties of gas sensors based on 2DMs. Strategies for improving these sensors are also discussed. The development trends for 2DMs-based gas sensors are presented, including regulation of microstructure, contact between 2DMs and substrates, microelectromechanical systems (MEMS) based gas sensors and gas sensor arrays, flexible and wearable gas sensors, smart self-power and wireless gas sensors, theoretical calculation and in-situ characterization, and the influence of humidity on gas sensitivity.

COMPOSITES PART B-ENGINEERING (2023)

Add to Collection

Article Engineering, Biomedical

Highly Sensitive and Omnidirectionally Stretchable Bioelectrode Arrays for In Vivo Neural Interfacing

Qinyi Zhao et al.

Summary: Flexible electrode array is an important tool for communication between living tissues and external electronics. However, current advances in flexible neural microelectrodes are limited by high impedance and poor mechanical consistency. In this study, a highly sensitive and omnidirectionally stretchable polymeric electrode array (PEA) is introduced, which significantly reduces impedance and has good mechanical properties. The PEA is capable of withstanding mechanical loads and successfully recording electrophysiological signals from a rat. This research provides new insights for the practical application of flexible neural electrodes.

ADVANCED HEALTHCARE MATERIALS (2023)

Add to Collection

Article Engineering, Environmental

Synergy of S-vacancy and heterostructure in BiOCl/Bi2S3_x boosting room-temperature NO2 sensing

Yongchao Yang et al.

Summary: In this study, BiOCl/Bi2S3_x heterostructures with rich S vacancies were synthesized through the integration of vacancy defect and heterostructure engineering to enhance NO2 gas sensing performance. The optimized sensor exhibited a high response value (Rg/Ra = 29.1) to 1 ppm NO2 at room temperature, 17 times higher than pure Bi2S3. The enhanced response of the S-vacancy-rich BiOCl/Bi2S3_x heterostructures was attributed to improved electron migration at the heterointerface and additional exposed active sites caused by S vacancies in Bi2S3_x. Additionally, the sensors showed good long-term stability, outstanding selectivity, and good flexibility. This study provides an effective method for synergistically engineering defect and heterostructure to enhance gas sensing properties at room temperature.

JOURNAL OF HAZARDOUS MATERIALS (2023)

Add to Collection

Article Chemistry, Analytical

Heterostructure construction of SnS2 Debye nanowires modified with ZnO nanorods for chemiresistive H2S detection in sulfur hexafluoride decomposition products

Mingcong Tang et al.

Summary: A sensitive H2S sensor for detecting low concentrations of H2S in SF6 electrical equipment was developed using ZnO nanorods-modified SnS2 Debye nanowires. At an optimum temperature of 180 degrees C, the sensor showed a response time of 10 s and a recovery time of 51 s to 30 ppm H2S, with a response value of 71.2%. The sensor exhibited a detection limit as low as 50 ppb for H2S, along with excellent stability, moisture resistance, and long-term stability. The study also demonstrated that ZnO enhanced the adsorption performance of SnS2 on H2S. The H2S sensor prepared using ZnO-SnS2 is expected to be a promising candidate for detecting hazardous gases in the environment and SF6 decomposition products.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

Add to Collection

Article Chemistry, Physical

Construction of LaF3 QD-modified SnS2 nanorod composites for ultrasensitive detection of H2S

Mingcong Tang et al.

Summary: Fast detection of low-concentration H2S gas is crucial for the proper functioning of SF6 electrical insulation equipment. A sensor made of LaF3 quantum dot modified SnS2 nanorods was developed for H2S gas detection, which exhibited excellent stability, moisture resistance, selectivity, and long-term stability at an optimal operating temperature of 150°C. The sensor showed a response value of 85.2% to 30 ppm H2S, with response and recovery times of 4 s and 93 s, respectively. The enhanced performance of the sensor can be attributed to the synergistic effect and heterojunction effect of the LaF3 quantum dots.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

Add to Collection

Article Chemistry, Analytical

High-sensitive NO2 sensor based on p-NiCo2O4/n-WO3 heterojunctions

Yaqing Hu et al.

Summary: A NO2 gas sensor based on NiCo2O4/-WO3 nanocomposite was synthesized with outstanding sensing performance. The sensor showed higher response, shorter response/recovery time, good linearity, stable repeatability and brilliant selectivity at 150 degrees C. The enhanced gas sensitivity of the sensor may be due to the unique microstructure of NiCo2O4/-WO3 and the p-n heterojunction formed between the two materials.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection

Article Chemistry, Physical

Realisation of highly sensitive and selective NO2 detection at room temperature utilizing defect-induced single-walled carbon nanotubes combined with Pt functionalisation

Youngmin Byoun et al.

Summary: This study developed a NO2 gas sensor with excellent selectivity and good performance in humid environments. By functionalizing and inducing defects in SWCNTs, the fabricated sensor achieved high sensitivity and low detection limit. However, the sensor's performance deteriorated under high humidity conditions.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Room-Temperature Semiconductor Gas Sensors: Challenges and Opportunities

Yanting Tang et al.

Summary: This article provides an overview of the recent progress in room-temperature gas sensors designed using the chemical and physical properties of low-dimensional semiconductor nanomaterials. The emergence of solution-processable nanomaterials offers opportunities to develop high-performance and flexible room-temperature gas sensors.

ACS SENSORS (2022)

Add to Collection

Article Chemistry, Analytical

Mesoporous WS2-Decorated Cellulose Nanofiber-Templated CuO Heterostructures for High-Performance Chemiresistive Hydrogen Sulfide Sensors

Jing Li et al.

Summary: This study developed a new type of H2S sensor using WS2-decorated CuO material, which exhibited remarkable high sensitivity and low power consumption, suitable for environmental monitoring and food freshness detection.

ANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Machine Learning-Assisted Development of Sensitive Electrode Materials for Mixed Potential-Type NO2 Gas Sensors

Bin Wang et al.

Summary: This study utilized machine learning to identify potential sensitive electrode materials for NO2 detection, with over 400 materials selected from 8000 candidates for further experimental verification and testing.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

MXene Ti3C2Tx-Derived Nitrogen-Functionalized Heterophase TiO2 Homojunctions for Room-Temperature Trace Ammonia Gas Sensing

Yong Zhou et al.

Summary: In this study, nitrogen-functionalized heterophase TiO2 homojunctions (N-MXene) derived from MXene Ti3C2Tx were prepared and utilized as a sensing layer to detect trace NH3 gas at room temperature. The sensors exhibited improved detection limits and performance compared to existing MXene-involved reports, showing strong responses, sufficient recovery, and fast response/recovery speeds under humid conditions. The incorporation of nitrogen doping and TiO2 homojunctions played a key role in enhancing the performance of the sensors.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Chemistry, Physical

Recent advances in energy-saving chemiresistive gas sensors: A review

Sanjit Manohar Majhi et al.

Summary: This paper presents a discussion on types of gas sensors and energy-saving strategies, focusing on self-heated gas sensors, MEMS-based gas sensors, and room temperature operated flexible/wearable sensors, as well as their applications in environmental monitoring.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Analytical

Boosting of NO2 gas sensing performances using GO-PEDOT:PSS nanocomposite chemical interface coated on langasite-based surface acoustic wave sensor

Kedhareswara Sairam Pasupuleti et al.

Summary: In this study, a high response SAW NO2 gas sensor was developed by depositing the GO-PEDOT:PSS nanocomposite on piezoelectric LGS substrate. The experimental results revealed the superior NO2 gas sensing performance of GO-PEDOT:PSS and the mass loading effect is the underlying mechanism for its performance.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

AuPt Bimetal-Functionalized SnSe2 Microflower-Based Sensors for Detecting Sub-ppm NO2 at Low Temperatures

Wei Liu et al.

Summary: A novel chemiresistive-type sensor utilizing AuPt bimetal-decorated SnSe2 microflowers has been developed for detecting sub-ppm levels of NO2, exhibiting superior performance and high response rate. The sensor demonstrates excellent long-term stability, signal repeatability, and selectivity towards typical interfering gases, potentially due to the synergistic effect of electronic and chemical sensitization induced by the AuPt bimetal.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Multifunctional poly(vinyl alcohol)/Ag nanofibers-based triboelectric nanogenerator for self-powered MXene/tungsten oxide nanohybrid NO2 gas sensor

Dongyue Wang et al.

Summary: In this paper, a PVA/Ag nanofibers-based TENG was developed for human respiration, movement, and harmful gas monitoring, achieving high voltage and power density outputs. By integrating a voltage regulator module, stable voltage output from the wind-driven TENG was achieved, providing a feasible solution for different wind conditions. A self-powered sensor system was developed by integrating TENGs and a gas sensor, offering a sustainable detection platform for tracking the source of harmful gases.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Analytical

Ammonia gas sensing properties and density functional theory investigation of coral-like Au-SnSe2 Schottky junction

Qiannan Pan et al.

Summary: This paper introduces a coral-like Au-modified SnSe2 nanocomposite prepared by a simple hydrothermal method, and tests the gas performances of the film sensors at room temperature. The experimental results demonstrate that the Au-modified SnSe2 nanocomposite film sensor has excellent response characteristics, extremely short response/recovery time, outstanding gas selectivity and stability towards ammonia gas.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Chemistry, Physical

Unconventionally anisotropic growth of PbSe nanorods: Controllable fabrication under solution-solid-solid regime over Ag2Se catalysis for broadband photodetection

Su You et al.

Summary: PbSe nanorods are promising candidates for next-generation photodetectors, grown in solution with unconventional growth direction. These nanorod-based photodetectors exhibit broadband response, high responsivity, and fast response time.

NANO RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

A humidity sensing and respiratory monitoring system constructed from quartz crystal microbalance sensors based on a chitosan/polypyrrole composite film

Xiaohua Liu et al.

Summary: In this study, a QCM humidity sensor based on a CS/PPy composite film was prepared using a simple physical modification method, and the synthesized composite was characterized. The sensor showed high sensitivity, low hysteresis, short response/recovery time, excellent selectivity, and stability, and could accurately sense changes in breathing parameters.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Toward Optimized Radial Modulation of the Space-Charge Region in One-Dimensional SnO2-NiO Core-Shell Nanowires for Hydrogen Sensing

Muhammad Hamid Raza et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Solution-Processed p-SnSe/n-SnSe2 Hetero-Structure Layers for Ultrasensitive NO2 Detection

Xiaoshan Wang et al.

CHEMISTRY-A EUROPEAN JOURNAL (2020)

Add to Collection

Article Environmental Sciences

Short- and intermediate-term exposure to NO2 and mortality: A multi-county analysis in China

Mike Z. He et al.

ENVIRONMENTAL POLLUTION (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Layered SnSe2 microflakes and SnSe2/SnO2 heterojunctions for low-temperature chemiresistive-type gas sensing

Xinyu Li et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Review Environmental Sciences

Long-term exposure to NO2 and O3 and all-cause and respiratory mortality: A systematic review and meta-analysis

Peijue Huangfu et al.

ENVIRONMENT INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High Selectivity Gas Sensing and Charge Transfer of SnSe2

Oscar Leonardo Camargo Moreira et al.

ACS SENSORS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

MoS2-Based Optoelectronic Gas Sensor with Sub-parts-per-billion Limit of NO2 Gas Detection

Tung Pham et al.

ACS NANO (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in designs and mechanisms of semiconducting metal oxide nanostructures for high-precision gas sensors operated at room temperature

Zhijie Li et al.

MATERIALS HORIZONS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Gas sensing with heterostructures based on two-dimensional nanostructured materials: a review

Atanu Bag et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Modification of Bulk Heterojunction and CI Doping for High-Performance Thermoelectric SnSe2/SnSe Nanocomposites

Yuejiao Shu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Systematic research on Ag2X (X = O, S, Se, Te) as visible and near-infrared light driven photocatalysts and effects of their electronic structures

Wei Jiang et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Photoactivated Mixed In-Plane and Edge-Enriched p-Type MoS2 Flake-Based NO2 Sensor Working at Room Temperature

Abhay V. Agrawal et al.

ACS SENSORS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Two-Dimensional Transition Metal Dichalcogenides and Metal Oxide Hybrids for Gas Sensing

Eunji Lee et al.

ACS SENSORS (2018)

Add to Collection

Review Chemistry, Analytical

Thin 2D: The New Dimensionality in Gas Sensing

Giovanni Neri

CHEMOSENSORS (2017)

Add to Collection

Article Public, Environmental & Occupational Health

Biological effects of inhaled nitrogen dioxide in healthy human subjects

P. Brand et al.

INTERNATIONAL ARCHIVES OF OCCUPATIONAL AND ENVIRONMENTAL HEALTH (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrasmall Magnetically Engineered Ag2Se Quantum. Dots for Instant Efficient Labeling and Whole-Body High-Resolution Multimodal Real-Time Tracking of Cell-Derived Microvesicles

Jing-Ya Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrasensitive NO2 Sensor Based on Ohmic Metal-Semiconductor Interfaces of Electrolytically Exfoliated Graphene/Flame-Spray-Made SnO2 Nanoparticles Composite Operating at Low Temperatures

Nantikan Tammanoon et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Review Biotechnology & Applied Microbiology

Human intestinal gas measurement systems: in vitro fermentation and gas capsules

Jian Zhen Ou et al.

TRENDS IN BIOTECHNOLOGY (2015)

Add to Collection

Article Chemistry, Physical

Ag2Se complex nanostructures with photocatalytic activity and superhydrophobicity

Huaqiang Cao et al.

NANO RESEARCH (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.