Related references
Note: Only part of the references are listed.Impact of changing compression ratio on engine characteristics of an SI engine fueled with equi-volume blend of methanol and gasoline
B. S. Nuthan Prasad et al.
ENERGY (2020)
An investigation on the influence of aluminium oxide nano-additive and honge oil methyl ester on engine performance, combustion and emission characteristics
Manzoore Elahi M. Soudagar et al.
RENEWABLE ENERGY (2020)
Environment-friendly novel fuel additives: Investigation of the effects of graphite nanoparticles on performance and regulated gaseous emissions of CI engine
Ammar Ahmed et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Gasoline engine fueled with bioethanol-bio-acetone-gasoline blends: Performance and emissions exploration
Ashraf Elfasakhany
FUEL (2020)
The Rising Costs of Fossil-Fuel Extraction: An Energy Crisis That Will Not Go Away
Bart Hawkins Kreps
AMERICAN JOURNAL OF ECONOMICS AND SOCIOLOGY (2020)
Optimization of fusel oil - Gasoline blend ratio to enhance the performance and reduce emissions
Seyed Mohammad Safieddin Ardebili et al.
APPLIED THERMAL ENGINEERING (2019)
Analysis of Fossil Fuel Energy Consumption and Environmental Impacts in European Countries
Florinda Martins et al.
ENERGIES (2019)
Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels
Jozef Martinka et al.
ENERGIES (2019)
Investigating the effect of Fe2O3 and TiO2 nanoparticle and engine variables on the gasoline engine performance through statistical analysis
Mohsen Valihesari et al.
FUEL (2019)
Investigation on diethyl ether as an additive with Calophyllum Inophyllum biodiesel for CI engine application
K. Nanthagopal et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Investigation into SI engine performance characteristics and emissions fuelled with ethanol/butanol-gasoline blends
M. Mourad et al.
RENEWABLE ENERGY (2019)
Is it really the end of internal combustion engines and petroleum in transport?
Gautam Kalghatgi
APPLIED ENERGY (2018)
Fuel economy in gasoline engines using Al2O3/TiO2 nanomaterials as nanolubricant additives
Mohamed Kamal Ahmed Ali et al.
APPLIED ENERGY (2018)
Ethanol in gasoline fuel blends: Effect on fuel consumption and engine out emissions of SI engines in cold operating conditions
Paolo Iodice et al.
APPLIED THERMAL ENGINEERING (2018)
Mixed modified Fe2O3-WO3 as new fuel borne catalyst (FBC) for biodiesel fuel
Bahamin Bazooyar et al.
ENERGY (2018)
Diesel engine combustion characteristics using nano-particles in biodiesel-diesel blends
G. Najafi
FUEL (2018)
Recent progress in gasoline surrogate fuels
S. Mani Sarathy et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)
Novel environmentally friendly fuel: The effects of nanographene oxide additives on the performance and emission characteristics of diesel engines fuelled with Ailanthus altissima biodiesel
S. S. Hoseini et al.
RENEWABLE ENERGY (2018)
Characterization and carcinogenic risk assessment of polycyclic aromatic and nitro-polycyclic aromatic hydrocarbons in exhaust emission from gasoline passenger cars using on-road measurements in Beijing, China
Xuewei Hao et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2018)
The effect of nano-additives in diesel-biodiesel fuel blends: A comprehensive review on stability, engine performance and emission characteristics
Manzoore Elahi M. Soudagar et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Beyond sensitivity analysis: A methodology to handle fuel and electricity prices when designing energy scenarios
Henrik Lund et al.
ENERGY RESEARCH & SOCIAL SCIENCE (2018)
Emissions analysis of an SI engine with humidified air induction
Murat Kapusuz et al.
INTERNATIONAL SCIENTIFIC CONFERENCE ENVIRONMENTAL AND CLIMATE TECHNOLOGIES, CONECT 2018 (2018)
Emissions control and performance evaluation of spark ignition engine with oxy-hydrogen blending
Vemula M. Krishna
INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY (2018)
Influence of plastic oil with ethanol gasoline blending on multi cylinder spark ignition engine
Vijaya Kumar Kareddula et al.
ALEXANDRIA ENGINEERING JOURNAL (2018)
Effect of added alumina as nano-catalyst to diesel-biodiesel blends on performance and emission characteristics of CI engine
Seyyed Hassan Hosseini et al.
ENERGY (2017)
Preparation and Characterisation of Highly Stable Iron Oxide Nanoparticles for Magnetic Resonance Imaging
David Kovar et al.
JOURNAL OF NANOMATERIALS (2017)
Impacts of additives on performance and emission characteristics of diesel engines during steady state operation
Esmail Khalife et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)
Energy model - A tool for preventing energy dysfunction
Priyanka Laha et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Heat Transfer Enhancement Analysis of Al2O3-Water Nanofluid Through Parallel and Counter Flow in Shell and Tube Heat Exchangers
S. Nallusamy et al.
INTERNATIONAL JOURNAL OF NANOSCIENCE (2017)
A comparison of performance and exhaust emissions with different valve lift profiles between gasoline and LPG fuels in a SI engine
Can Cinar et al.
APPLIED THERMAL ENGINEERING (2016)
Graphite Oxide Nanoparticle as a Diesel Fuel Additive for Cleaner Emissions and Lower Fuel Consumption
Jong Boon Ooi et al.
ENERGY & FUELS (2016)
An assessment on performance, combustion and emission behavior of a diesel engine powered by ceria nanoparticle blended emulsified biofuel
M. Annamalai et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Engine performance evaluation and pollutant emissions analysis using ternary bio-ethanol-iso-butanol-gasoline blends in gasoline engines
Ashraf Elfasakhany
JOURNAL OF CLEANER PRODUCTION (2016)
Dispersion stability and thermophysical properties of environmentally friendly graphite oil-based nanofluids used in machining
Yu Su et al.
ADVANCES IN MECHANICAL ENGINEERING (2016)
THERMAL CONDUCTIVITY ANALYSIS AND CHARACTERIZATION OF COPPER OXIDE NANOFLUIDS THROUGH DIFFERENT TECHNIQUES
S. Nallusamy
JOURNAL OF NANO RESEARCH (2016)
Impact of fuel price and emissions on inventory policies
Amulya Gurtu et al.
APPLIED MATHEMATICAL MODELLING (2015)
Effect of compression ratio on the emission, performance and combustion characteristics of a gasoline engine fueled with iso-butanol/gasoline blends
Cenk Sayin et al.
ENERGY (2015)
Combustion, performance and emission of a diesel engine fuelled with diesel doped with carbon black
Arun Kumar Wamankar et al.
ENERGY (2015)
Examination of the effects of organic based manganese fuel additive on combustion and engine performance
Mehmet Celik et al.
FUEL PROCESSING TECHNOLOGY (2015)
Effect of dispersion of various nanoadditives on the performance and emission characteristics of a CI engine fuelled with diesel, biodiesel and blends-A review
T. Shaafi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Influence of alumina nanoparticles, ethanol and isopropanol blend as additive with diesel-soybean biodiesel blend fuel: Combustion, engine performance and emissions
T. Shaafi et al.
RENEWABLE ENERGY (2015)
Performance and Emission characteristics of a CI Engine fuelled with diesel and TiO2 nanoparticles as fuel additive
Rolvin D'Silva et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Experimental study on emissions and performance of an internal combustion engine fueled with gasoline and gasoline/n-butanol blends
Ashraf Elfasakhany
ENERGY CONVERSION AND MANAGEMENT (2014)
Nanofuels: Combustion, engine performance and emissions
Rakhi N. Mehta et al.
FUEL (2014)
Thermal Conductivity of Graphene and Graphite: Collective Excitations and Mean Free Paths
Giorgia Fugallo et al.
NANO LETTERS (2014)
Direct electrochemistry with enhanced electrocatalytic activity of hemoglobin in hybrid modified electrodes composed of graphene and multi-walled carbon nanotubes
Wei Sun et al.
ANALYTICA CHIMICA ACTA (2013)
Alternative fuels for transportation vehicles: A technical review
B. L. Salvi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Physical properties of nanofluid suspension of ferromagnetic graphite with high Zeta potential
N. S. Souza et al.
PHYSICS LETTERS A (2012)
Effect of metal based additive on performance emission and combustion characteristics of diesel engine fuelled with biodiesel
G. R. Kannan et al.
APPLIED ENERGY (2011)
Promotion of CO Oxidization and Inhibition of NO Formation by Gaseous Iron Species during High-Temperature Off-Gas Combustion
Sen Li et al.
ENERGY & FUELS (2011)
Effects of volumetric efficiency on the performance and emissions characteristics of a dual fueled (gasoline and LPG) spark ignition engine
M. Gumus
FUEL PROCESSING TECHNOLOGY (2011)
Production of liquid biofuels from renewable resources
Poonam Singh Nigam et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Yanwu Zhu et al.
ADVANCED MATERIALS (2010)
The effect of adding dimethyl carbonate (DMC) and ethanol to unleaded gasoline on exhaust emission
Lan-bin Wen et al.
APPLIED ENERGY (2010)
Application of the Miller cycle to reduce NOx emissions from petrol engines
Yaodong Wang et al.
APPLIED ENERGY (2008)
A review of the properties and hazards of some alternative fuels
G. R. Astbury
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2008)
High-valent nonheme iron-oxo species in biomimetic oxidations
Xiaopeng Shan et al.
JOURNAL OF INORGANIC BIOCHEMISTRY (2006)
Performance and emissions characteristics of a hydrogen enriched LPG internal combustion engine at 1400 rpm
GH Choi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)
Using exhaust gas recirculation in internal combustion engines: a review
GH Abd-Alla
ENERGY CONVERSION AND MANAGEMENT (2002)