4.7 Article

Deep learning empowering design for selective solar absorber

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Integrated silicon-based spectral reshaping intermediate structures for high performance solar thermophotovoltaics

Guozhi Hou et al.

Summary: Solar thermophotovoltaics (STPV) system utilizes an absorber and emitter to reshape wide-band solar radiation into narrowband infrared emission, converting it into electric energy with high efficiency. The study presents a silicon-based intermediate structure for spectral reshaping. The hierarchical Si NW structure acts as an absorber, exhibiting excellent absorption performance and low heat loss. The planar Si-W-SiN/SiNO structure functions as an emitter, showcasing selective narrowband absorption (emission) peak at the target wavelength. With a specific design, the overall efficiency of the STPV system based on this silicon-based intermediate structure can potentially exceed 29%.

SOLAR ENERGY (2023)

Article Materials Science, Multidisciplinary

All-Dielectric Insulated 3D Plasmonic Nanoparticles for Enhanced Self-Floating Solar Evaporation under One Sun

Yang Wang et al.

Summary: In this work, all-dielectric insulated plasmonic absorbers are demonstrated as efficient self-floating interfacial solar evaporators with a measured efficiency of approximately 80% under one sun. The enhanced energy transfer process can be attributed to the synergistic effect of plasmon-enhanced solar absorption, broadband light induced thermal localization and/or insulation, as well as efficient mass transport channels. These results provide new insights into the understanding of plasmonic solar thermal conversion and inspire further development in this field.

ADVANCED OPTICAL MATERIALS (2023)

Article Chemistry, Multidisciplinary

Ultra-Broadband Perfect Absorber based on Titanium Nanoarrays for Harvesting Solar Energy

Didi Song et al.

Summary: Solar energy is a clean and renewable energy source that addresses the current energy and climate crisis. Near-perfect broadband solar absorbers can assist in developing an effective solar energy-harvesting system. This study presents a metamaterial perfect absorber design that operates in the ultraviolet to near-infrared spectral range, utilizing a titanium nanoarray coupled to an optical cavity. Numerical simulations demonstrate that the optimal absorber achieves an average absorption efficiency of up to 99.84% in the 200-3000 nm broadband range. It is also shown that the absorber possesses desirable features for practical solar energy absorption and harvesting, such as precision tolerance, polarization independence, and large angular acceptance.

NANOMATERIALS (2023)

Article Thermodynamics

Efficient direct absorption solar collector based on hollow TiN nanoparticles

Yuan Zou et al.

Summary: In this study, a direct absorption solar collector (DASC) based on hollow TiN nanoparticles is proposed for efficient solar harvesting. The unique geometric effects and excellent thermophysical properties of nanoparticles have attracted significant attention in recent years. Numerical results show that the photothermal conversion efficiency of hollow TiN can reach 92.64%, which is 7.18% higher compared to solid TiN with the same particle size.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

Article Green & Sustainable Science & Technology

Optical properties of hollow plasmonic nanopillars for efficient solar photothermal conversion

Haotuo Liu et al.

Summary: In this study, the optical properties and photothermal conversion performance of hollow and solid nanopillar structures based on different plasmonic materials (Ag, Au, Cu, TiN) were compared. The results show that hollow Au nanopillars exhibit the highest increase in photothermal conversion efficiency, by 34.14%. This enhancement is attributed to the promotion of local and propagating surface plasmon resonances in the hollow structure. Conversely, the increase in photothermal conversion efficiency for hollow TiN nanopillars is only 1.41%, as the solid TiN nanopillars already have high efficiency (97.19%). The hollow structure can enhance the photothermal properties of Plasmonic nanofluids, especially for precious metal materials with narrow-band absorption, such as Au and Ag.

RENEWABLE ENERGY (2023)

Article Chemistry, Multidisciplinary

Broadband Solar Metamaterial Absorbers Empowered by Transformer-Based Deep Learning

Wei Chen et al.

Summary: This research develops a deep learning model based on metamaterial spectrum transformer (MST) for the powerful design of high-performance broadband solar metamaterial absorbers (SMA). The model divides the optical spectrum of metamaterial into N patches, overcoming the problem of overfitting in traditional deep learning and greatly enhancing the learning capability. A flexible design tool is also developed for real-time on-demand design of metamaterials with various optical functions.

ADVANCED SCIENCE (2023)

Article Chemistry, Physical

Pattern-free solar absorber driven by superposed Fabry-Perot resonances

Haotuo Liu et al.

Summary: In this study, a pattern-free absorber was proposed, consisting of a TiN-SiO2-based multilayer structure, for solar energy utilization. Numerical results showed that the maximum average spectral absorption of a 3-cell multilayer structure reached 93.5% at wavelengths of 0.3-2.5 μm. The underlying physical mechanism was explained by the coupling of superposed Fabry-Perot resonances and the intrinsic absorption of TiN. The findings in this work deepen the understanding of FP resonance and pave a novel path for efficient solar thermal energy utilization.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2023)

Article Energy & Fuels

A three-material chimney-like absorber with a sharp cutoff for high-temperature solar energy harvesting

Biao Zhang et al.

Summary: This study proposes a highly efficient solar absorber with a broad absorption spectrum, significantly improving the thermal conversion efficiency.

SOLAR ENERGY (2022)

Article Energy & Fuels

Broadband and wide-angle solar absorber for the visible and near-infrared frequencies

Jun Wu et al.

Summary: A polarization-insensitive broadband and wide-angle solar absorber has been proposed, which achieves high absorption in the visible to near-infrared regions with stable performance at different viewing angles and certain dimensional tolerance. It has potential applications in solar energy capturing and conversion, thermo-photovoltaic devices and thermal emitters.

SOLAR ENERGY (2022)

Article Chemistry, Physical

An ultra-broadband and wide-angle absorber based on a TiN metamaterial for solar harvesting

Chunlei Sun et al.

Summary: In this work, a near-perfect metamaterial solar absorber with broadb-and, wide angle, polarization insensitivity, and high-temperature resistance is proposed and investigated. The absorber achieves an average absorption of 97.6% in the spectral range of 300-2500 nm and maintains high absorption performance at large angles of solar radiation and polarization insensitivity. The research indicates that this work will benefit the design and application of solar thermal conversion and thermophotovoltaic systems.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

Article Optics

Design of multilayer planar film structures for near-perfect absorption in the visible to near-infrared

Haoyuan Cai et al.

Summary: In this research, a nearly perfect broadband absorber consisting of multiple films is proposed and its absorption performance is investigated through simulations and experiments. The results demonstrate that the absorber can achieve an average absorption of up to 97.9% with specific material selection and optimization, indicating its significant potential for applications such as solar energy.

OPTICS EXPRESS (2022)

Article Energy & Fuels

Inverse design a patternless solar energy absorber for maximizing absorption

Jing Liu et al.

Summary: The recognition of broadband and high-absorption solar energy has increased interest in the application of solar energy. In this study, a patternless solar absorber with multilayer common metal-dielectric flat film is designed using particle swarm optimization and finite-difference time-domain algorithm. The absorber achieves perfect absorption within the broadband solar energy spectrum and exhibits stable performance and high thermal conversion efficiency.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Article Nanoscience & Nanotechnology

Nanophotonic control of thermal emission under extreme temperatures in air

Sean McSherry et al.

Summary: An epitaxial heterostructure of perovskite and rocksalt is found to be stable in high-temperature oxidizing environments, providing a solution to the low stability of nanophotonic materials. This discovery opens up possibilities for further breakthroughs in photonic and energy conversion applications.

NATURE NANOTECHNOLOGY (2022)

Review Green & Sustainable Science & Technology

Solar Selective Absorber for Emerging Sustainable Applications

Jing Zhang et al.

Summary: This review systematically summarizes the recent developments of solar selective absorbers (SSAs) and their sustainable applications in various solar-driven fields, while discussing the challenges and future opportunities of SSAs.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2022)

Article Energy & Fuels

Scalable-manufactured metal-insulator-metal based selective solar absorbers with excellent high-temperature insensitivity

Yanpei Tian et al.

Summary: This work demonstrates a new spectrally selective solar absorber with a multilayered stack made of silica/alumina/tungsten/alumina/tungsten based on metal-insulator-metal resonance structures, which shows high absorptance, low emittance, and high solar-to-heat efficiency. The absorber is angular insensitive and polarization-independent, providing a novel alternative for improving the energy conversion efficiency of solar thermal engineering.

APPLIED ENERGY (2021)

Article Nanoscience & Nanotechnology

Ultra-broadband perfect absorber based on nanoarray of titanium nitride truncated pyramids for solar energy harvesting

Ruiqi Piao et al.

Summary: The study proposed a metamaterial perfect absorber working in the ultraviolet to near-infrared band, achieving almost perfect absorption performance and demonstrating the contributions of localized surface plasmon resonance effect and intrinsic loss of TiN material to the ultra-broadband perfect absorption behavior, with great application prospects.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2021)

Article Optics

Ultra-broadband selective absorber for near-perfect harvesting of solar energy

Haotuo Liu et al.

Summary: This study investigated the slow light effect, magnetic polaritons, and other physical model coupling mechanisms in photonic crystals to construct an efficient solar energy absorber. The simulation study showed that the absorber has a high photothermal conversion efficiency of 96.45% in the 0.3-2.5 μm band, which is 11% higher than traditional designs. Increasing the concentration factor allows the absorber to maintain high efficiency even at high temperatures.

JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2021)

Article Energy & Fuels

Optimization configuration of selective solar absorber using multi-island genetic algorithm

Wen-Wen Zhang et al.

Summary: The study introduces the MIGA method for optimizing the configuration of selective solar absorbers, achieving high solar absorptance and low emittance. The absorber exhibits great characteristics such as polarization independence and angle insensitivity due to hybrid resonance modes of Wood's anomaly, surface plasmon polariton, and magnetic polariton.

SOLAR ENERGY (2021)

Article Optics

Ultra-broadband metamaterial absorbers from long to very long infrared regime

Yu Zhou et al.

Summary: Broadband metamaterial absorbers with high absorption, ultrathin thickness and easy configurations are researched and demonstrated in this paper, paving the way for enhancing the optical performance in applications of infrared thermal emitters, imaging and photodetectors.

LIGHT-SCIENCE & APPLICATIONS (2021)

Article Energy & Fuels

Enhanced thermal stability of solar selective absorber based on nano-multilayered AlCrSiO films

Dou Yang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Article Materials Science, Multidisciplinary

Numerical study on extinction performance of Ag nanoparticles@ SiO2 ellipsoid

Jing Liu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Energy & Fuels

Metal-organic framework derived porous carbon of light trapping structures for efficient solar steam generation

Sainan Ma et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Review Multidisciplinary Sciences

Pathways and challenges for efficient solar-thermal desalination

Zhangxin Wang et al.

SCIENCE ADVANCES (2019)

Article Materials Science, Multidisciplinary

Large-Area, Ultrathin Metasurface Exhibiting Strong Unpolarized Ultrabroadband Absorption

Shangliang Wu et al.

ADVANCED OPTICAL MATERIALS (2019)

Article Chemistry, Physical

Vivid-colored silicon solar panels with high efficiency and non-iridescent appearance

Chengang Ji et al.

NANOSCALE HORIZONS (2019)

Article Materials Science, Multidisciplinary

Broadband and Ultrathin Infrared Stealth Sheets

Mohammad J. Moghimi et al.

ADVANCED ENGINEERING MATERIALS (2018)

Article Optics

Optimization of a near-field thermophotovoltaic system operating at low temperature and large vacuum gap

Mikyung Lim et al.

JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2018)

Article Chemistry, Multidisciplinary

High-Temperature Refractory Metasurfaces for Solar Thermophotovoltaic Energy Harvesting

Chun-Chieh Chang et al.

NANO LETTERS (2018)

Article Engineering, Electrical & Electronic

Wide-Angle Polarization-Independent Broadband Absorbers Based on Concentric Multisplit Ring Arrays

Bin Tang et al.

IEEE PHOTONICS JOURNAL (2017)

Article Thermodynamics

Performance analysis of solar thermophotovoltaic conversion enhanced by selective metamaterial absorbers and emitters

Hao Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Article Materials Science, Multidisciplinary

Multilayer tungsten-alumina-based broadband light absorbers for high-temperature applications

Manohar Chirumamilla et al.

OPTICAL MATERIALS EXPRESS (2016)

Article Multidisciplinary Sciences

Self-assembly of highly efficient, broadband plasmonic absorbers for solar steam generation

Lin Zhou et al.

SCIENCE ADVANCES (2016)

Article Multidisciplinary Sciences

Mirror-backed Dark Alumina: A Nearly Perfect Absorber for Thermoelectronics and Thermophotovotaics

Mohamed Farhat et al.

SCIENTIFIC REPORTS (2016)

Article Physics, Applied

Ultra-narrow-band light dissipation by a stack of lamellar silver and alumina

Ding Zhao et al.

APPLIED PHYSICS LETTERS (2014)

Article Multidisciplinary Sciences

Passive radiative cooling below ambient air temperature under direct sunlight

Aaswath P. Raman et al.

NATURE (2014)

Review Optics

Metallic nanostructures for light trapping in energy-harvesting devices

Chuan Fei Guo et al.

LIGHT-SCIENCE & APPLICATIONS (2014)

Article Multidisciplinary Sciences

Plasmonic black gold by adiabatic nanofocusing and absorption of light in ultra-sharp convex grooves

Thomas Sondergaard et al.

NATURE COMMUNICATIONS (2012)

Review Multidisciplinary Sciences

The Future of Seawater Desalination: Energy, Technology, and the Environment

Menachem Elimelech et al.

SCIENCE (2011)