☆ 4.7 Article

Promoting CdS photocatalytic activity through a coating layer of solid electrolyte LiTi2(PO4)3

APPLIED SURFACE SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

Efficient photocatalytic degradation of high-concentration moxifloxacin over dodecyl benzene sulfonate modified graphitic carbon nitride: Enhanced photogenerated charge separation and pollutant enrichment

Pengfei Sun et al.

Summary: A visible-light-driven photocatalyst, DBS/CNNS, has been synthesized and applied for the elimination of high-concentration antibiotics in wastewater. It demonstrated efficient degradation of moxifloxacin (MOX) under visible light irradiation, breaking through the bottleneck of degrading high concentration antibiotics. The hydrophobic dodecyl benzene group and the formed sulfonyl group with strong electron-withdrawing property were beneficial for MOX enrichment and charge recombination suppression.

JOURNAL OF CLEANER PRODUCTION (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Toward Sustainable All Solid-State Li-Metal Batteries: Perspectives on Battery Technology and Recycling Processes

Xiaoxue Wu et al.

Summary: Lithium-based batteries are transitioning from liquid to solid state, with all solid-state Li-metal batteries (ASSLMBs) being the most promising candidates. This paper analyzes the challenges, progress, and prospects of recycling ASSLMBs, highlighting the importance of sustainable recycling technologies and designing battery-recycling-oriented ASSLMBs. Future research directions, challenges, and strategies for achieving sustainable development of ASSLMBs are outlined.

ADVANCED MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Al-SrTiO3 decorated with non-noble metal co-catalyst NC-W2N for boosting photocatalytic overall water splitting via enhancing interfacial redox activity and charge separation

Meifeng Chen et al.

Summary: Noble metal-free photocatalysts are essential for cost control in practical applications. Researchers developed a non-noble metal photocatalyst composed of N-doped carbon-W2N (NC-W2N) anchored on Al-doped SrTiO3 (Al-SrTiO3) to achieve efficient photocatalytic overall water splitting. The optimized NC-W2N/Al-SrTiO3 demonstrated significantly higher H2 evolution rate compared to Al-SrTiO3, with AQE values of 2.57% and 0.56% at 350 nm and 400 nm, respectively. The practical exploration in natural saltwater showed a surprising H2 generation rate for the NC-W2N/Al-SrTiO3 photocatalyst.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Synergistic effect of phosphorus doping and MoS2 co-catalysts on g-C3N4 photocatalysts for enhanced solar water splitting

Xunfu Zhou et al.

Summary: A non-noble metal photocatalyst of MoS2 nanodots anchored on P-doped g-C3N4 was constructed. The P-doped g-C3N4/MoS2 catalyst achieved efficient photocatalytic water splitting with a high hydrogen evolution rate of 121.7 μmol h-1 g-1. This work paves a new avenue for designing noble-metal-free photocatalysts for large-scale applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Physical

Insight into synergistic effect of Ti3C2 MXene and MoS2 on anti-photocorrosion and photocatalytic of CdS for hydrogen production

Chao Wu et al.

Summary: A ternary composite of CdS, MoS2 and Ti3C2 MXene was successfully constructed, which exhibited reinforced photocatalytic H2-production activity and increased photocorrosion resistant capability. This work highlights the synergistic effect of Ti3C2 MXene and MoS2 on the promoted photocatalytic performance and durability of CdS, which can significantly enhance its commercial availability and industrial applications.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Add to Collection

Article Chemistry, Physical

Electronic, Optical, piezoelectric properties and photocatalytic water splitting performance of Two-dimensional group IV-V compounds

Peng Wu et al.

Summary: Using first-principles calculations, we predicted the physical properties and property-guided potential applications of group IV-V compound MX2 (M = Si, Ge, Sn; X = N, P, As) and its Janus structure MXY (X =/ Y), which are isostructural to the synthesized compound SiP2. We demonstrated the stability of 8 out of 18 monolayers in thermodynamics, dynamics, and mechanics, and found that these monolayers are semiconducting with optimal bandgaps ranging from 0.99 to 2.33 eV. The calculated piezoelectric coefficients d11 for the MX2 and MXY monolayers range from 8.0 to 26.9 pm/V. Our results suggest that these 2D materials have potential applications in photocatalytic water splitting due to their suitable band edge positions, excellent solar absorption, moderate exciton binding energies, and fair light conversion rates. These findings may be valuable for the design, synthesis, and applications of group IV-V compounds in future electronic, optoelectronic devices, and hydrogen producing materials.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Construction of Z-scheme heterojunction CoS/CdS@g-C3N4 hollow sphere with spatical charge separation for enhanced photocatalytic hydrogen production

Chengjia Zhang et al.

Summary: By coating 0D CdS QDs and 0D CoS nanoparticles on hollow spherical carbon nitride (HCNS), a distinct double-shell structure is formed, which spatially separates the photoinduced charge to improve electron transfer and reaction kinetics. The CoS/CdS@HCNS exhibits the highest H2 generation activity under visible light irradiation (2866 mu mol.g- 1.h- 1), which is 20.2 and 7.9 times higher than that of HCNS (142 mu mol.g- 1.h- 1) and CdS (363 mu mol.g- 1.h- 1), respectively. Additionally, the 5%-CoS/ CdS@HCNS composite shows high stability after 4 cycles of test, providing a new strategy for exploring and manufacturing 0D/3D photocatalysts for energy and environmental applications.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Optimizing Atomic Hydrogen Desorption of Sulfur-Rich NiS1+x Cocatalyst for Boosting Photocatalytic H2 Evolution

Duoduo Gao et al.

Summary: An efficient coupling strategy of active-site-enriched regulation and electronic structure modification is developed by rational design of core-shell Au@NiS1+x nanostructured cocatalyst to address the limited H-2-generation performance of transition-metal chalcogenides. The resulting TiO2/Au@NiS1+x(1.7:1.3) exhibits a boosted H-2-generation rate with improved apparent quantum efficiency, indicating potential for enhancing photocatalytic hydrogen generation.

ADVANCED MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Confinement Matters: Stabilization of CdS Nanoparticles inside a Postmodified MOF toward Photocatalytic Hydrogen Evolution

Adrija Ghosh et al.

Summary: Insights into developing innovative routes for the stabilization of photogenerated charge-separated states by suppressing charge recombination in photocatalysts is a topic of immense importance. In this study, a metal-organic framework (MOF)-based composite was synthesized, where CdS nanoparticles (NPs) were confined inside the nanosized pores of Zr4+-based MOF-808. The confinement of the CdS NPs inside the MOF pores showed a higher rate of H-2 evolution from water compared to CdS NPs stabilized on the external surface of MOF-808.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Greatly enhanced photocurrent density in bismuth ferrite films by Localized Surface Plasmon Resonance effect

Yunpeng Li et al.

Summary: In this study, a heterostructure consisting of Au nanoparticles layer and BFMO thin film was constructed, and it was found that the photocurrent densities of these heterostructures were greatly improved compared to pure BFMO film. The localized surface plasmon resonance (LSPR) effect derived from Au nanoparticles was proposed to play a key role in enhancing the photocurrent densities.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Geometry-tunable sulfur-doped carbon nitride nanotubes with high crystallinity for visible light nitrogen fixation

Yuxiang Zhu et al.

Summary: Highly crystalline carbon nitride nanotubes doped with sulfur (S-CNNTs) were synthesized by copolymerizing thiourea and melamine. The resulting S-CNNTs with a diameter of around 20 nm and mesopores on the tube wall exhibited optimal visible light photocatalytic activity, attributed to increased crystallinity, S-induced coordination, and one-dimensional mesoporous structure. The sulfur doping improved photoreduction ability and promoted the exposure of active sites, leading to enhanced photocatalytic performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Physical

Nanostructured materials for the visible-light driven hydrogen evolution by water splitting: A review

Pratibha et al.

Summary: The article discusses the importance of converting light energy into chemical energy, and introduces the application of nanostructured photocatalytic materials in hydrogen generation reactions. The review explores different types of nanostructured photocatalysts, synthetic routes, photocatalytic hydrogen production efficiency, and methods for constructing heterojunction systems.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Review Chemistry, Physical

Recent trends in photocatalytic water splitting using titania based ternary photocatalysts-A review

Fathima Kausar et al.

Summary: Photocatalytic water splitting using semiconductor-based photocatalysts is an ideal method for hydrogen production, and titania is a widely explored material in this field. Modifying the structure and chemical properties of the photocatalysts can improve their efficiency.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Regulating interfacial morphology and charge-carrier utilization of Ti3C2 modified all-sulfide CdS/ZnIn2S4 S-scheme heterojunctions for effective photocatalytic H2 evolution

Junxian Bai et al.

Summary: The control of interface morphology and charge-carrier utilization in metal sulfide photocatalysts is crucial for improving the separation efficiency of electrons and holes and increasing the surface reaction active sites. In this study, a Ti3C2/ZIS/CdS composite material was synthesized, which showed improved electron-hole separation efficiency and enhanced charge transfer due to the formation of an all-sulfide S-scheme heterojunction. The addition of Ti3C2 further reduced the recombination of electrons and holes, leading to a high hydrogen production rate.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Challenges for photocatalytic overall water splitting

Chuanbiao Bie et al.

Summary: Photocatalytic overall water splitting is a promising technology for hydrogen production, but its current performance is insufficient for large-scale production. This paper provides a theoretical and practical analysis of the challenges associated with photocatalytic overall water splitting, including unfavorable thermodynamics, slow kinetics, dissolved oxygen, and rapid backward reaction.

CHEM (2022)

Add to Collection

Article Engineering, Environmental

Phosphorus-enriched platinum diphosphide nanodots as a highly efficient cocatalyst for photocatalytic H2 evolution of CdS

Jiachao Xu et al.

Summary: In this study, a novel phosphorus-rich platinum diphosphide nanodot was developed to improve the photocatalytic activity of CdS. The resulting PtP2@C/CdS photocatalyst showed significantly enhanced hydrogen evolution rate under visible-light irradiation. This work provides a new perspective for the development of high-efficiency photocatalysts.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Physical

Recent Advances in Conduction Mechanisms, Synthesis Methods, and Improvement Strategies for Li1+xAlxTi2-x(PO4)3 Solid Electrolyte for All-Solid-State Lithium Batteries

Pengfei Wu et al.

Summary: Solid-state electrolytes are key to developing safe and high-energy-density Li batteries. LATP has been hailed as an attractive candidate due to its excellent electrochemical stability, low production costs, and good chemical compatibility. However, its poor thermal stability at high temperatures and interfacial reactions with electrodes limit its practical use. This review provides a comprehensive overview of recent advances in LATP for solid-state batteries and discusses potential solutions.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Bifunctional CdS/MoO2/MoS2 Catalyst Enhances Photocatalytic H2 Evolution and Pyruvic Acid Synthesis

Chuanbiao Bie et al.

Summary: A bifunctional dual-cocatalyst-modified photocatalyst is constructed for hydrogen evolution and selective pyruvic acid production. A two-step single-electron route for pyruvic acid production is proposed based on monitoring the intermediates.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Review Chemistry, Physical

Metal Carbide-Based Cocatalysts for Photocatalytic Solar-to-Fuel Conversion

Kelin He et al.

Summary: This review focuses on the importance and applications of metal carbide-based cocatalysts in photocatalytic solar-to-fuel conversion, discussing their advantages, drawbacks, and design rules, as well as summarizing three synthesis approaches for high-active metal carbide-based cocatalysts. Additionally, the applications of metal carbide-based cocatalysts in various fields are analyzed.

SMALL STRUCTURES (2022)

Add to Collection

Article Chemistry, Applied

Integration of 2D layered CdS/WO3 S-scheme heterojunctions and metallic Ti3C2 MXene-based Ohmic junctions for effective photocatalytic H2 generation

Junxian Bai et al.

Summary: A 2D/2D/2D layered heterojunction photocatalyst with cascaded 2D coupling interfaces was designed and constructed, which effectively promoted spatially directional charge separation and transport between CdS and WO3 nanosheets, resulting in an increased visible-light hydrogen evolution rate.

CHINESE JOURNAL OF CATALYSIS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Photocorrosion inhibition of CdS-based catalysts for photocatalytic overall water splitting

Xiaofeng Ning et al.

NANOSCALE (2020)

Add to Collection

Article Chemistry, Physical

Inhibition of CdS photocorrosion by Al2O3 shell for highly stable photocatalytic overall water splitting under visible light irradiation

Xiaofeng Ning et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Chemistry, Physical

The enhancement of CdS photocatalytic activity for water splitting via anti-photocorrosion by coating Ni2P shell and removing nascent formed oxygen with artificial gill

Wenlong Zhen et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Chemistry, Physical

Water splitting over core-shell structural nanorod CdS@Cr2O3 catalyst by inhibition of H-2-O-2 recombination via removing nascent formed oxygen using perfluorodecalin

Bin Tian et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Chemistry, Physical

Noble-metal-free Ni3C cocatalysts decorated CdS nanosheets for high efficiency visible-light-driven photocatalytic H-2 evolution

Song Ma et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Review Chemistry, Multidisciplinary

CdS-Based photocatalysts

Lei Cheng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Mitigating Interfacial Potential Drop of Cathode-Solid Electrolyte via Ionic Conductor Layer To Enhance Interface Dynamics for Solid Batteries

Jia-Yan Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Hollow CoSx Polyhedrons Act as High-Efficiency Cocatalyst for Enhancing the Photocatalytic Hydrogen Generation of g-C3N4

Junwei Fu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Review Chemistry, Physical

Photocatalytic Water Splitting: Quantitative Approaches toward Photocatalyst by Design

Kazuhiro Takanabe

ACS CATALYSIS (2017)

Add to Collection

Article Chemistry, Physical

A review on g-C3N4-based photocatalysts

Jiuqing Wen et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Inhibition of photocorrosion of CdS via assembling with thin film TiO2 and removing formed oxygen by artificial gill for visible light overall water splitting

Xiaofeng Ning et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Chemistry, Physical

Probing effective photocorrosion inhibition and highly improved photocatalytic hydrogen production on monodisperse PANI@CdS core-shell nanospheres

Chao Wang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Overall water splitting by Pt/g-C3N4 photocatalysts without using sacrificial agents

Guigang Zhang et al.

CHEMICAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrahigh-Performance Pseudocapacitor Electrodes Based on Transition Metal Phosphide Nanosheets Array via Phosphorization: A General and Effective Approach

Kai Zhou et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Achieving overall water splitting using titanium dioxide-based photocatalysts of different phases

Rengui Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Thermodynamic Oxidation and Reduction Potentials of Photocatalytic Semiconductors in Aqueous Solution

Shiyou Chen et al.

CHEMISTRY OF MATERIALS (2012)

Add to Collection

Article Chemistry, Physical

LiTi2(PO4)3 with NASICON-type structure as lithium-storage materials

GX Wang et al.

JOURNAL OF POWER SOURCES (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.