☆ 4.6 Review

Improving the durability of cobaltite cathode of solid oxide fuel cells - a review

RSC ADVANCES (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Facile and low-temperature synthesis approach to fabricate Sm0.5Sr0.5CoO3-δ cathode material for solid oxide fuel cell

Sheraz Ahmed et al.

Summary: We report the synthesis of a facilely synthesized Sm0.5Sr0.5CoO3 (SSC) nano-catalyst as a cathode material for solid oxide fuel cells (SOFCs). The SSC nano-catalyst showed excellent crystallinity and morphology, with an average particle size of 100 nm after calcination at 1250 degrees C. The resulting SSC material exhibited a peak power density of 900 mWcm(-2) at 700 degrees C and excellent stability under accelerated operating conditions. This work presents a cost-effective and scalable method for producing highly robust SSC cathode material for SOFCs.

JOURNAL OF THE KOREAN CERAMIC SOCIETY (2023)

Add to Collection

Article Chemistry, Physical

A heuristic approach to boost the performance and Cr poisoning tolerance of solid oxide fuel cell cathode by robust multi-doped ceria coating

Hafiz Ahmad Ishfaq et al.

Summary: Here, we report a highly conductive, robust, and innovative Gd and Pr multi-doped ceria (GPDC) coating to enhance the ORR kinetics and stability against Cr poisoning of the state-of-the-art LSCF cathode. The GPDC coating significantly improves the ORR kinetics by improving the surface of the LSCF cathode and shows a two-fold increase in electrochemical performance compared to the bare LSCF cathode. It also exhibits outstanding stability in an accelerated Cr poisoning test, attributed to the alleviation of SrCrO4 formation. Both relaxation time-based analysis and experimental results confirm that the GPDC coating enhances the ORR activity and Cr tolerance of the LSCF cathode.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Add to Collection

Article Chemistry, Physical

Durability improvement of large-area anode supported solid oxide fuel cell fabricated by 4-layer sequential co-lamination and co-firing process

Amjad Hussain et al.

Summary: In this study, a thin-film based 4-layered anode-supported solid oxide fuel cell with a large-area was fabricated. The cell showed a high-power output of 41.5W at 50A and a maximum power density of 1.6 Wcm-2 at 700 degrees C. Long-term testing demonstrated a degradation rate of 0.2% kh-1 at 25A current, meeting the stringent benchmark for commercialization.

JOURNAL OF POWER SOURCES (2023)

Add to Collection

Article Materials Science, Ceramics

Ultra-fast route to fabricate large-area anode-supported solid oxide fuel cell via microwave-assisted sintering

Amjad Hussain et al.

Ceramics International (2023)

Add to Collection

Article Materials Science, Ceramics

Computational design and experimental realization of Zn substitution in Cr-poisoning resistant LaNi0.6Fe0.4O3-delta solid oxide fuel cell cathode for enhanced performance and durability

Sanaullah Qamar et al.

Summary: In this study, the effect of Zn substitution on the B-site of LNF cathode materials was investigated, resulting in enhanced electrical and electrochemical properties. The experimental results show that LNFZ(3) exhibits 25.4% lower polarization resistance and 52.3% higher maximum power density at 700 degrees C compared to LNF. Additionally, LNFZ(3) demonstrates robust operation under accelerated chromium-poisoning conditions.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Chemistry, Physical

Vertical-cavity surface-emitting laser (VCSEL)-based ultrafast photonic sintering of solid oxide fuel cells (SOFCs): prospects for time-efficient/two-dimensional scalability to large-sized SOFCs

Jaehwan Kim et al.

Summary: In this study, infrared vertical-cavity surface-emitting lasers (VCSELs) are used for the rapid fabrication of solid oxide fuel cells (SOFCs). VCSELs can densify the laminated multilayered SOFCs in just 2.42 hours, compared to over 100 hours needed for conventional thermal sintering. Additionally, VCSELs offer the potential for accelerated fabrication of high-performance SOFCs with improved stability.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

Add to Collection

Article Materials Science, Ceramics

Lowering the sintering temperature of a gadolinia-doped ceria functional layer using a layered Bi2O3 sintering aid for solid oxide fuel cells

Hojae Lee et al.

Summary: The study develops a method for fabricating a dense gadolinia-doped ceria (GDC) functional layer using a sacrificial bismuth oxide, Bi2O3, sintering aid layer above the GDC layer, even under constrained sintering conditions. This approach improves the solid oxide fuel cell performance significantly.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Chemistry, Physical

Inhibition of chromium poisoning in La0.6Sr0.4Co0.2Fe0.8O3-d cathode via simple electroless silver plating for solid oxide fuel cells

Zhenwei Wang et al.

Summary: This study investigates the anti-chromium stability of La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF) cathodes through a simple electroless silver plating method. The modified LSCF-Ag cathodes exhibit improved resistance to chromium poisoning, avoiding the decrease in cell performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Sub-second sintering process for La6Sr4Co2Fe8O3-δ-gadolinium doped ceria composite cathode via a flash light irradiation method for intermediate temperature-solid oxide fuel cells

Junghum Park et al.

Summary: Research shows that utilizing a composite cathode material structure and employing a novel flash light sintering process can achieve high-performance solid oxide fuel cells at lower operating temperatures. This approach not only addresses high temperature manufacturing issues but also reduces process time and suppresses side reactions at the cathode/electrolyte interface.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Engineering, Environmental

Self-stabilized hybrid cathode for solid oxide fuel cell: A-site deficient perovskite coating as solid solution for strontium diffusion

Jin Li et al.

Summary: To address the stability issue of La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF) cathode, researchers propose a novel approach of introducing La(0.9)5CoO(3-delta) (LC95) thin film onto the surface of the porous LSCF scaffold. The hybrid cathode (LSCF@LC95) shows lower polarization resistance and remarkable long-term stability compared to the pristine LSCF cathode.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Green & Sustainable Science & Technology

A review on solid oxide fuel cell durability: Latest progress, mechanisms, and study tools

Sanaz Zarabi Golkhatmi et al.

Summary: The commercial breakthrough of solid oxide fuel cells (SOFCs) is hindered by degradation-related issues. To improve their durability, it is crucial to identify the sources of degradation and develop appropriate degradation analysis and mitigation methods.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Article Materials Science, Coatings & Films

Oxidation and Cr-evaporation behavior of MnCo based spinel and composite coated AISI 430 steel

Mohammad Hassan Shirani Bidabadi et al.

Summary: This study investigates the importance of chemical composition and porosity of coatings in reducing oxidation and Cr-evaporation rate of AISI 430 steel. Both composition and porosity affect the density and oxidation resistance of the coatings. Composite coatings show better oxidation resistance, while copper-doped coatings exhibit better Cr-evaporation behavior. The formation of a densified layer plays a crucial role in resisting oxidation and controlling Cr migration.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Reversely trapping atoms from a perovskite surface for high-performance and durable fuel cell cathodes

Zechao Zhuang et al.

Summary: This article investigates a reverse atom-trapping strategy to improve cathode performance in solid-oxide fuel cells by controlling the extraction of strontium atoms from the surface. The experimental results show that this strategy significantly increases the power density of single cells and improves the longevity of the cathode.

NATURE CATALYSIS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Dense Electrode Layers-Supported Microtubular Oxygen Pump

Alexey Nikonov et al.

Summary: This article presents the development and test results of a microtubular solid oxide oxygen pump with Ce0.76Gd0.24O2-delta (GDC) electrolyte, which has the potential to be used in medicine. The experiment shows that the polarization resistance of the dense electrodes of the oxygen pump is significantly lower than that of standard porous electrodes. By using nanosized GDC powder, the chemical interaction between GDC and LSCF is prevented during the co-sintering process. The microtubular oxygen pump is highly resistant to thermal shock.

MEMBRANES (2022)

Add to Collection

Article Chemistry, Applied

A dynamic infiltration technique to synthesize nanolayered cathodes for high performance and robust solid oxide fuel cells

Saeed Ur Rehman et al.

Summary: In this study, a facile and scalable urea assisted ultrasonic spray infiltration technique was proposed for the nanofabrication of durable nanostructured solid oxide fuel cell (SOFC) cathodes. The technique eliminates the need for high temperature calcination cycles and allows for faster fabrication of the cathodes. The results showed that the urea assisted infiltration combined with ultrasonic spray technique can be scaled up for any desired cathode area and lead to highly durable SOFC performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Review Engineering, Environmental

Recent advance in physical description and material development for single component SOFC: A mini-review

Taimoor Raza et al.

Summary: This paper presents a mini review on the recent development of single component solid oxide fuel cells (SOFCs), which have the potential to overcome the limitations of high operating temperatures. Unlike conventional three-component SOFCs, single component SOFCs feature a homogeneous layer with hybrid dual ions conduction based on semiconductor-ion hetero-structure materials. The research focuses on the interfacial properties and mechanisms of semiconducting-ionic materials and the transition from non-functional to functional materials with potential for dual ions conduction. The potential of this new device is evaluated and compared to conventional SOFCs, highlighting its promising future prospects.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Performance and durability of Ni-Co alloy cermet anodes for solid oxide fuel cells

Kohei Matsumoto et al.

Summary: Ni-Co alloy cermet anodes are highly attractive for the development of robust solid oxide fuel cells (SOFCs) due to their high durability, comparable electrochemical performance, and protection against further oxidation provided by cobalt-rich oxide layers on the surface of the alloy particles.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Effect of angstrom-level oxide overcoat on Sr segregation behavior of LSM electrodes

Haoyu Li et al.

Summary: This study investigates the use of a thin oxide overcoat to suppress surface segregation and thermal agglomeration of A-site dopants in ABO(3) perovskite cathodes. The results show that a binary oxide overcoat with multi-valent cations can incorporate dopants into the lattice, while a single valent cation overcoat has little effect on segregation.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Electrophoretic deposition and low-temperature densification of Cu1.35Mn1.65O4 spinel for an interconnect protective coating in solid oxide fuel cells

Seong-Uk Oh et al.

Summary: In this study, spinel-structured Cu1.35Mn1.65O4 powder was coated onto stainless steel using electrophoretic deposition method for protective coating in solid oxide fuel cells. The coating was densified through the addition of iodine and heat treatment, resulting in improved resistance stability of the film.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Highly dense Mn3O4 and CuMn2O4 spinels as efficient protective coatings on solid oxide fuel cell interconnect and their chromium diffusion studies

Nayana Acharya et al.

Summary: This study reports Mn3O4 and CuMn2O4 spinels as potential protective coating materials for metallic solid oxide fuel cell interconnect SUS430, demonstrating their ability to resist chromium diffusion at intermediate temperatures with low activation energies and good electrical conductivity.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Ceramics

Effect of transition metal doping on the sintering and electrochemical properties of GDC buffer layer in SOFCs

Saeed Ur Rehman et al.

Summary: The study investigated the impact of transition metal doping on the sintering and electrochemical properties of Ce0.9Gd0.1O2-d (GDC) interlayer, with Mn doping showing the most improved electrochemical performance. Among various transition metal dopants, Mn-doped GDC interlayer exhibited the highest power density at 750 degrees C in the experiments.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2021)

Add to Collection

Review Materials Science, Ceramics

Chromium poisoning for prolonged lifetime of electrodes in solid oxide fuel cells - Review

Teruhisa Horita

Summary: This paper discusses the crucial challenge of prolonged durability in Solid Oxide Fuel Cell systems, focusing on volatile chromium species poisoning. Through chemical reactions and electrochemical reduction, the interactions between perovskite oxide cathode surface and volatile Cr species are studied. The paper proposes solutions and analyzes recovery mechanisms, providing insights for new material combinations in next-generation SOFCs.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Review Materials Science, Ceramics

Controlling cation migration and inter-diffusion across cathode/interlayer/ electrolyte interfaces of solid oxide fuel cells: A review

Muhammad Zubair Khan et al.

Summary: Solid oxide fuel cells (SOFCs) are a potential way to achieve efficient and clean electrochemical energy conversion, but commercialization is hindered by material degradation, especially at the cathode-electrolyte interface. Understanding cation migration and interdiffusion is crucial for improving SOFC durability, with perovskite-based oxides showing promising results. Control measures for interdiffusion in the cathode/electrolyte/interlayer are key to designing highly efficient and stable SOFCs.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Review Materials Science, Ceramics

Flat-tubular solid oxide fuel cells and stacks: a review

Muhammad Zubair Khan et al.

Summary: Solid oxide fuel cells (SOFCs) offer high efficiency and clean energy conversion advantages, but their high operating temperature limits them to stationary applications. Research on geometrically modified flat-tubular (FT) SOFC cells and stacks show improved performance compared to tubular types and better stability than planar types. The use of interconnect materials, high temperatures, and current density are critical factors for cell durability. New stack designs are being explored to enhance performance and stability.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)

Add to Collection

Article Materials Science, Ceramics

Lanthanum-doped ceria interlayer between electrolyte and cathode for solid oxide fuel cells

Hirofumi Sumi et al.

Summary: The study found that using lanthanum-doped ceria (LDC) as an interlayer in solid oxide fuel cells can result in higher ionic conductivity and maximum power density compared to gadolinia-doped ceria (GDC). While the switch from GDC to LDC interlayers decreased the ohmic resistance, the polarization resistance for the oxygen reduction reaction slightly increased due to distribution of relaxation times. The gradual variation of chemical compositions between YSZ electrolyte and LDC interlayer influenced both ohmic and polarization resistances.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)

Add to Collection

Review Chemistry, Physical

Solid oxide fuel cell (SOFC) performance evaluation, fault diagnosis and health control: A review

Jingxuan Peng et al.

Summary: Solid oxide fuel cells are a promising alternative energy source for new energy vehicles, distributed power generation, and military equipment, offering advantages such as high efficiency, low noise, low emission, and flexible fuel. To commercialize them effectively, performance evaluation, fault diagnosis, and health control strategies are essential for improving cell performance and ensuring efficient and stable operation.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Materials Science, Ceramics

Effect of applied current density on the degradation behavior of anode-supported flat-tubular solid oxide fuel cells

Muhammad Zubair Khan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Manufacturing cost model for planar 5 kWel SOFC stacks at Forschungszentrum Julich

S. Harboe et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Engineering of Charged Defects at Perovskite Oxide Surfaces for Exceptionally Stable Solid Oxide Fuel Cell Electrodes

Mingi Choi et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

In-situ experimental benchmarking of solid oxide fuel cell metal interconnect solutions

Manuel Bianco et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Review Chemistry, Physical

A review of Solid Oxide Fuel Cell cathode materials with respect to their resistance to the effects of chromium poisoning

C. M. Harrison et al.

SOLID STATE IONICS (2020)

Add to Collection

Review Chemistry, Physical

A review of sulfur poisoning of solid oxide fuel cell cathode materials for solid oxide fuel cells

Fangfang Wang et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Comprehensive review of chromium deposition and poisoning of solid oxide fuel cells (SOFCs) cathode materials

Lingfeng Zhou et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Electrochemistry

Influence of Polarization on the Morphological Changes of Nickel in Fuel Electrodes of Solid Oxide Cells

Zhenjun Jiao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

In-situ Cu-doped MnCo-spinel coatings for solid oxide cell interconnects processed by electrophoretic deposition

A. G. Sabato et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Review Chemistry, Analytical

Recent advances in material and performance aspects of solid oxide fuel cells

I. Sreedhar et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

Highly conductive and stable Mn1.35Co1.35Cu0.2Y0.1O4 spinel protective coating on commercial ferritic stainless steels for intermediate-temperature solid oxide fuel cell interconnect applications

Imdadullah Thaheem et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Electrochemistry

Electrochemical Performance and Degradation Analysis of an SOFC Short Stack Following Operation of More than 100,000 Hours

Qingping Fang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Suppression of Cation Segregation in (La,Sr)CoO3-delta, by Elastic Energy Minimization

Ja Yang Koo et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Materials Science, Ceramics

Protective coating based on manganese-copper oxide for solid oxide fuel cell interconnects: Plasma spray coating and performance evaluation

Nurhadi S. Waluyo et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Physical

Highly durable solid oxide fuel cells: suppressing chemical degradation via rational design of a diffusion-blocking layer

Seunghwan Lee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Electrochemistry

Nature and Functionality of La0.58Sr0.4Co0.2Fe0.8O3-δ / Gd0.2Ce0.8O2-δ / Y0.16Zr0.84O2-δ Interfaces in SOFCs

Julian Szasz et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Review Chemistry, Physical

Sr Segregation in Perovskite Oxides: Why It Happens and How It Exists

Bonjae Koo et al.

JOULE (2018)

Add to Collection

Article Thermodynamics

Integration of SOFC/GT hybrid systems in Micro-Grids

L. Barelli et al.

ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

A robust and active hybrid catalyst for facile oxygen reduction in solid oxide fuel cells

Yu Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Multi-scale analysis of the diffusion barrier layer of gadolinia-doped ceria in a solid oxide fuel cell operated in a stack for 3000 h

M. Morales et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Role of the gadolinia-doped ceria interlayer in high-performance intermediate-temperature solid oxide fuel cells

Doh Won Jung et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Gadolinium doped ceria interlayers for Solid Oxide Fuel Cells cathodes: Enhanced reactivity With sintering aids (Li, Cu, Zn), and improved densification by infiltration

Clement Nicollet et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Materials Science, Ceramics

Fabrication of dense and defect-free diffusion barrier layer via constrained sintering for solid oxide fuel cells

Sung-Il Lee et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Review Thermodynamics

Perovskite oxides applications in high temperature oxygen separation, solid oxide fuel cell and membrane reactor: A review

Jaka Sunarso et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)

Add to Collection

Article Materials Science, Ceramics

Effect of GDC interlayer thickness on durability of solid oxide fuel cell cathode

Muhammad Zubair Khan et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Chemistry, Physical

Chemical characterization of surface precipitates in La0.7Sr0.3Co0.2Fe0.8O3-δ as cathode material for solid oxide fuel cells

Yang Yu et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Electrochemistry

Influence of La0.6Sr0.4Co0.2Fe0.8O3-δ Microstructure on GDC Interlayer Stability and Cation Diffusion across the LSCF/GDC/YSZ Interfaces

Jeffrey C. De Vero et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Physical

Improved chemical and electrochemical stability of perovskite oxides with less reducible cations at the surface

Nikolai Tsvetkov et al.

NATURE MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Accelerated ceria-zirconia solubilization by cationic diffusion inversion at low oxygen activity

Vincenzo Esposito et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Energy & Fuels

Anode-Supported Solid Oxide Fuel Cell Achieves 70000 Hours of Continuous Operation

Ludger Blum et al.

ENERGY TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Physical

Segregated Chemistry and Structure on (001) and (100) Surfaces of (La1-xSrx)2CoO4 Override the Crystal Anisotropy in Oxygen Exchange Kinetics

Yan Chen et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Article Electrochemistry

Effect of Sr Surface Segregation of La0.6Sr0.4Co0.2Fe0.8O3-delta Electrode on Its Electrochemical Performance in SOC

Zehua Pan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Multidisciplinary Sciences

Redox activity of surface oxygen anions in oxygen-deficient perovskite oxides during electrochemical reactions

David N. Mueller et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Electrochemistry

Influence of Deposition Temperature of GDC Interlayer Deposited by RF Magnetron Sputtering on Anode-Supported SOFC

W. Wu et al.

FUEL CELLS (2014)

Add to Collection

Article Multidisciplinary Sciences

Fast vacancy-mediated oxygen ion incorporation across the ceria-gas electrochemical interface

Zhuoluo A. Feng et al.

NATURE COMMUNICATIONS (2014)

Add to Collection

Article Chemistry, Physical

Insight into surface segregation and chromium deposition on La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes of solid oxide fuel cells

Ling Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Cation Size Mismatch and Charge Interactions Drive Dopant Segregation at the Surfaces of Manganite Perovskites

Wonyoung Lee et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

In situ growth of nanoparticles through control of non-stoichiometry

Dragos Neagu et al.

NATURE CHEMISTRY (2013)

Add to Collection

Article Chemistry, Physical

Efficiency of a dense thin CGO buffer layer for solid oxide fuel cell operating at intermediate temperature

G. Constantin et al.

SOLID STATE IONICS (2013)

Add to Collection

Article Nanoscience & Nanotechnology

The Effect of Fabrication Conditions for GDC Buffer Layer on Electrochemical Performance of Solid Oxide Fuel Cells

Jung-Hoon Song et al.

NANO-MICRO LETTERS (2013)

Add to Collection

Proceedings Paper Electrochemistry

Testing Microtubular SOFCs in Unmanned Air Vehicles (UAVs)

A. D. Meadowcroft et al.

SOLID OXIDE FUEL CELLS 13 (SOFC-XIII) (2013)

Add to Collection

Proceedings Paper Electrochemistry

Cathode performance and deposited Cr under Cr poisoning condition in the (La0.6Sr0.4)(Co0.2Fe0.8)O3 cathode

Do-Hyung Cho et al.

SOLID STATE IONIC DEVICES 9 - ION CONDUCTING THIN FILMS AND MULTILAYERS (2013)

Add to Collection

Article Chemistry, Physical

Chemical Heterogeneities on La0.6Sr0.4CoO3-δ Thin Films-Correlations to Cathode Surface Activity and Stability

Zhuhua Cai et al.

CHEMISTRY OF MATERIALS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Investigation of surface Sr segregation in model thin film solid oxide fuel cell perovskite electrodes

WooChul Jung et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Add to Collection

Article Crystallography

Crystal growth and magnetic properties of spinel (Co,Mn)3O4

Sun Hee Kang et al.

JOURNAL OF CRYSTAL GROWTH (2012)

Add to Collection

Article Chemistry, Physical

Nd-nickelate solid oxide fuel cell cathode sensitivity to Cr and Si contamination

J. Andreas Schuler et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection

Article Chemistry, Physical

Component interactions after long-term operation of an SOFC stack with LSM cathode

J. Malzbender et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection

Article Electrochemistry

Anomalous Chemical Expansion Behavior of Pr0.2Ce0.8O2-δ Thin Films Grown by Pulsed Laser Deposition

Y. Kuru et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced oxygen reduction activity on surface-decorated perovskite thin films for solid oxide fuel cells

Eva Mutoro et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Lithium Oxide Addition on the Sintering Behavior and Electrical Conductivity of Gadolinia Doped Ceria

Minfang Han et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2011)

Add to Collection

Article Chemistry, Physical

Low temperature deposited (Ce,Gd)O2-x interlayer for La0.6Sr0.4Co0.2Fe0.8O3 cathode based solid oxide fuel cell

Yunhui Gong et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Interfacial stability and cation diffusion across the LSCF/GDC interface

Manabu Izuki et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Surface and interface behaviors of (La0.8Sr0.2)xMnO3 air electrode for solid oxide cells

Tongan Jin et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Chemical durability of Solid Oxide Fuel Cells: Influence of impurities on long-term performance

Kazunari Sasaki et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Long-term stability of the oxygen exchange properties of (La,Sr)1-z(Co,Fe)O3-δ in dry and wet atmospheres

Edith Bucher et al.

SOLID STATE IONICS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Atomistic simulations of surface segregation of defects in solid oxide electrolytes

Hark B. Lee et al.

ACTA MATERIALIA (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Intermediate temperature solid oxide fuel cells

Daniel J. L. Brett et al.

CHEMICAL SOCIETY REVIEWS (2008)

Add to Collection

Article Chemistry, Physical

Investigation of anode-supported SOFC with cobalt-containing cathode and GDC interlayer

Hun-Gi Jung et al.

SOLID STATE IONICS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Galvanomagnetic transport properties of nitrogenated (La,Sr)MnO3-δ and LaMnO3-δ

M. Von Kreutzbruck et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Sintering of ceramic powders: Determination of the densification and grain growth mechanisms from the grain size/relative density trajectory

Guillaume Bernard-Granger et al.

SCRIPTA MATERIALIA (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Thin film coating technologies of (Ce,Gd)O2-δ interlayers for application in ceramic high-temperature fuel cells

S. Uhlenbruck et al.

THIN SOLID FILMS (2007)

Add to Collection

Article Chemistry, Physical

Thermodynamic considerations on Cr poisoning in SOFC cathodes

H. Yokokawa et al.

SOLID STATE IONICS (2006)

Add to Collection

Article Chemistry, Physical

A fundamental study of chromium deposition on solid oxide fuel cell cathode materials

Michael C. Tucker et al.

JOURNAL OF POWER SOURCES (2006)

Add to Collection

Article Electrochemistry

Chromium poisoning of perovskite cathodes by the ODS alloy Cr5Fe1Y(2)O(3) and the high chromium ferritic steel Crofer22APU

E Konysheva et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Add to Collection

Review Nanoscience & Nanotechnology

Metallic interconnects for solid oxide fuel cells

JW Fergus

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

Add to Collection

Review Chemistry, Multidisciplinary

Factors governing oxygen reduction in solid oxide fuel cell cathodes

SB Adler

CHEMICAL REVIEWS (2004)

Add to Collection

Review Materials Science, Multidisciplinary

A review of anode materials development in solid oxide fuel cells

SP Jiang et al.

JOURNAL OF MATERIALS SCIENCE (2004)

Add to Collection

Review Chemistry, Physical

Solid oxide fuel cell technology-features and applications

NQ Minh

SOLID STATE IONICS (2004)

Add to Collection

Article Chemistry, Multidisciplinary

Swiss SOFC integration activities: Stacks, systems, and applications

G Robert et al.

CHIMIA (2004)

Add to Collection

Review Chemistry, Multidisciplinary

Solid oxide fuel cells

RM Ormerod

CHEMICAL SOCIETY REVIEWS (2003)

Add to Collection

Article Chemistry, Physical

Design studies of mobile applications with SOFC-heat engine modules

W Winkler et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

Article Electrochemistry

Oxygen transport at the LaMnO3 film/yttria-stabilized zirconia interface under different cathodic overpotentials by secondary ion mass spectrometry

T Horita et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

Add to Collection

Article Materials Science, Ceramics

Materials and technologies for SOFC-components

E Ivers-Tiffee et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Gadolinia-doped ceria and yttria stabilized zirconia interfaces: Regarding their application for SOFC technology

A Tsoga et al.

ACTA MATERIALIA (2000)

Add to Collection

Review Chemistry, Physical

Thin SOFC electrolytes and their interfaces - A near-term research strategy

AJ McEvoy

SOLID STATE IONICS (2000)

Add to Collection

Article Electrochemistry

Solid oxide fuel cells: fundamental aspects and prospects

O Yamamoto

ELECTROCHIMICA ACTA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.