☆ 4.7 Article

Creep and strength characteristics of cemented gangue backfill under coupling effect of load and acid corrosion

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Exploring the link between ultrasonic and strength behavior of cementitious mine backfill by considering pore structure

Muhammet Sari et al.

Summary: This study evaluated the strength development and pore structure changes of cementitious mine backfill (CMB) using ultrasonic pulse velocity (UPV) technique. The influence of different types of pyritic tailings on the quality of filling specimens was investigated. The results showed that the total porosity of CMBs decreased with increasing age and binder ratio. The acidic nature of low pH tailings negatively affected the aged strength of CMBs, but these negative effects decreased with slag substitution and high binder dosages. Excellent correlation curves were found between UPV and UCS.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Using electrical resistivity to determine the efficiency of supplementary cementitious materials to prevent alkali-silica reaction in concrete

Krishna Siva Teja Chopperla et al.

Summary: This study used MCPT to evaluate ASR expansion in concrete mixtures with highly reactive fine aggregates and SCMs. The findings showed that concrete mixtures with higher electrical resistivity and lower pore solution alkalinity had less ASR expansion, suggesting a potential new approach to prevent ASR.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Numerical study on microscale and macroscale strength behaviors of hardening cemented paste backfill

Baoxu Yan et al.

Summary: This study develops a numerical model based on continuous damage mechanics methods to simulate the hardening process of cemented paste backfill (CPB), and investigates the relationship between the hardening process and mechanical parameters. The results show that numerical simulation can intuitively demonstrate the relationship between crack development and particle size distribution, and quantitatively analyze the influence on strength properties.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Mining & Mineral Processing

Mechanism and control technology of strong ground pressure behaviour induced by high-position hard roofs in extra-thick coal seam mining

Chao Pan et al.

International Journal of Mining Science and Technology (2022)

Add to Collection

Article Environmental Sciences

Deformation and instability properties of cemented gangue backfill column under step-by-step load in constructional backfill mining

Yuxia Guo et al.

Summary: Constructional backfill mining with cemented gangue backfill column can effectively tackle environmental issues caused by mining activities. Research shows that the deformation and instability properties of the backfill column during step-by-step loading paths vary, with lateral creep strain developing faster than axial creep strain.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Strength and microstructure evolution in cemented mine backfill with low and high pH pyritic tailings: Effect of mineral admixtures

Muhammet Sari et al.

Summary: This study investigates the quality of cemented paste fill (CPB) containing low pH and high pH pyritic tailings. The results show that CPB made with ground blast furnace slag (GBFS) has better strength compared to fly ash (FA) based CPB, regardless of the tailings' pH. The pH of pyritic tailings affects the performance of the fill material. Overall, this study provides important information and technical evidence for the engineering design of a low-cost, zero-waste, and viable mine fill system.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Environmental Sciences

Thermal enhancement of gangue-cemented paste backfill with graphite and silica sand: an experimental investigation

Baiyi Li et al.

Summary: The thermal conductivity of mine backfill is crucial for understanding the potential of geothermal energy extraction in deep underground mines. This study investigates the use of graphite and silica sand to enhance the thermal conductivity of gangue-cemented paste backfill. The results show that while graphite improves thermal performance, it has negative effects on mechanical behavior and flowability. On the other hand, the addition of silica sand effectively increases thermal conductivity without degrading compressive performance and flow performance.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Environmental Sciences

Coupled effects of fly ash and calcium formate on strength development of cemented tailings backfill

Xiuxiu Miao et al.

Summary: This study utilized neural network modelling to predict the effect of fly ash and calcium formate on the strength development of cemented tailings backfill. Sensitivity analysis and SEM microstructure investigation were conducted to further understand the contributions and mechanisms. The results showed that the combination of fly ash content, calcium formate content, and curing time can accurately predict the strength of the cemented tailings backfill while the influence of curing time was the most significant.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Energy & Fuels

Dissolution characteristics of gas in mine water and its application on gas pressure measurement of water-intrusion coal seam

Leilei Si et al.

Summary: This study proposed a new method for measuring gas pressure based on gas solubility in order to determine the gas pressure for water-intrusion boreholes. Through laboratory experiments and field tests, the composition of mine water, gas solubility in mine water, and gas dissolved amount in borehole water over time were investigated, leading to the proposal of a new method and equipment for testing gas pressure in coal mines. The research results provide new insights for measuring gas pressure in water-intrusion coal seam.

FUEL (2022)

Add to Collection

Article Mining & Mineral Processing

Evolution and modeling of mine water inflow and hazard characteristics in southern coalfields of China: A case of Meitanba mine

Jinhai Liu et al.

International Journal of Mining Science and Technology (2022)

Add to Collection

Article Construction & Building Technology

Study on the influence mechanism of activated coal gangue powder on the properties of filling body

Jisheng Qiu et al.

Summary: The objective of this study is to improve the resource utilization rate of coal gangue by investigating the influence mechanism of activated coal gangue powder on the working performance and mechanical properties of coal gangue-based green cemented filling body. The results show that by adding appropriate activated coal gangue powder, the properties of the filling body can be significantly improved. The micro-morphology and pozzolanic effects of activated coal gangue powder enhance the water resistance and strength of the filling body.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Study on strength and deformation characteristics of cemented gangue backfill body under the coupling action of load and salt erosion

Yonghui Zhao et al.

Summary: This study investigated the long-term strength and deformation characteristics of cemented gangue backfill body (CGBB) under the coupling action of load and salt erosion. The results showed that the compressive strength of CGBB increased with the rise of compressive stress level, while the eroded specimens had lower compressive strength than the non-eroded specimens. The deformation of CGBB increased with time and compressive stress level, and there was still a certain increase in deformation for the eroded CGBB later on. By analyzing the microstructure, it was found that the formation of expansion products changed the compactness of CGBB in different erosion stages, and the compressive stress within 50% stress-strength ratio inhibited the erosion of CGBB.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Numerical investigation of creeping rockmass interaction with hardening and shrinking cemented paste backfill

Baoxu Yan et al.

Summary: Based on laboratory tests and numerical simulation, this study establishes a framework to simulate the hardening backfill in a mining stope. The study reveals the significant influence of hardening process, curing stress, filling rate, and shrinkage deformation on the stress distribution and deformation behavior of the backfill and surrounding rockmass.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Review Environmental Sciences

Deformation failure and acoustic emission characteristics of continuous graded waste rock cemented backfill under uniaxial compression

Guan Chen et al.

Summary: Uniaxial compression tests were conducted on cemented backfill with different particle size gradations to study the effect of backfill aggregate particle size on compressive strength and failure mode. The damage evolution mechanism of cemented backfill with different particle size gradations was discussed by analyzing the characteristics of acoustic emission during the failure process.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Mining & Mineral Processing

Mechanical behavior of coal under different mining rates: A case study from laboratory experiments to field testing

Mingzhong Gao et al.

Summary: During deep mining, the excavation disturbance stress path is crucial for the stability of surrounding rock mass and ground pressure. An investigation on the loading rate of disturbed rock or coal revealed a threshold range, impacting the mechanical behavior of coal.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Construction & Building Technology

Study on triaxial creep test and theoretical model of cemented gangue-fly ash backfill under seepage-stress coupling

Jifeng Hou et al.

Summary: This paper studied the effect of seepage on the long-term stability of cemented gangue-fly ash backfill (CGFB) and analyzed the creep law of CGFB under seepage-stress coupling. It established a creep damage constitutive model considering the seepage-stress coupling effect. The results showed that higher seepage water pressure led to larger creep deformation and steady-state creep rate in CGFB, and seepage significantly affected its long-term strength.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Spatial variability of concrete electrical resistivity and corrosion rate in laboratory conditions

Filipe Pedrosa et al.

Summary: The study characterized the spatial variability of concrete electrical resistivity and corrosion rate through monitoring reinforced concrete slabs in a laboratory environment. Corrosion rates showed larger spatial variability, especially when active corrosion was present, compared to concrete resistivity.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Effect of carbonation on bulk resistivity of cement/carbon nanofiber composites

Kamila Gawel et al.

Summary: The conductivity of cement/carbon nanofiber (CNF) composite materials is affected by various parameters, and the carbonation process can cause changes in resistivity. The resistivity changes are related to water to cement ratio and volumetric changes affecting connectivity between CNFs.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Hydration and microstructural characterization of early-age cement paste with ultrasonic wave velocity and electrical resistivity measurements

Hong Jae Yim et al.

Summary: This study evaluates the microstructural evolution of fresh cement paste for 24 hours through two types of non-destructive measurements and compares them with the setting time by Vicat needle test. The results show that the critical times obtained by different methods vary. XRD and TG analyses were then performed to identify hydration products at specific points.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of carbonation curing on sulfate resistance of cement-coal gangue paste

Ling Qin et al.

Summary: The paper investigated the effect of carbonation curing on sulfate attack resistance of cement-coal gangue (PC-CG) pastes, showing that accelerated carbonation can improve compressive strength, alleviate strength loss, and reduce expansion, leading to better durability of cement-based materials in sulfate attack regions.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Thermodynamics

Research on energy saving of ultrasonic wave in the process of making sea-slurry ice

Zhen Wang et al.

Summary: Ultrasonic waves can increase seawater crystallization speed, reduce subcooling degree during seawater crystallization, and save energy. The best performance is achieved when producing sea-slurry ice under specific power and frequency conditions.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Review Environmental Sciences

Development overview of paste backfill technology in China's coal mines: a review

Ke Yang et al.

Summary: Paste backfill technology has become an important part of green safety mine construction and coal green mining technology system in China. By analyzing the statistics and typical cases, the current situation and future development trends of paste backfill technology in coal mines can be understood. The future development direction includes research and development of backfill materials and intelligent paste backfill technology.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Add to Collection

Article Mining & Mineral Processing

Creep properties and resistivity-ultrasonic-AE responses of cemented gangue backfill column under high-stress area

Hongyu Ran et al.

Summary: The study investigates the creep and instability properties of a cemented gangue backfill column under high stress, using uniaxial compression creep tests. Results show that the CGBM sample exhibits creep hardening behavior, with creep failure strength slightly higher than uniaxial compressive strength. Strain and strain rate increase with stress-strength ratio in single-step loading tests, while they first decrease and then increase in multi-step loading creep process. Creep stability can be monitored based on electrical resistivity, UPV, and AE signals in high-stress areas.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Environmental Sciences

A preliminary study of solid-waste coal gangue based biomineralization as eco-friendly underground backfill material: Material preparation and macro-micro analyses

Shijie Guo et al.

Summary: This study proposes a cement-free eco-friendly technology using Bacillus pasteurii for CG-based backfilling material, which can consolidate loose grains with high biomineral content and no pollution. Through strain domestication and comprehensive analysis, the method successfully produces bio-mineralized material with significant influence on biomineral deposition.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Stress-strain-acoustic responses in failure process of coal rock with different height to diameter ratios under uniaxial compression

Guo Yu-xia et al.

Summary: The study investigated the mechanical properties of coal rocks under different H/D ratios through uniaxial compression tests. The results showed that the strength and strain of coal rocks increase as H/D decreases, and the coal rock failure process can be divided into four stages, with different AE activities observed under various H/D ratios.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Evaluation of static segregation of cemented gangue-fly ash backfill material using electrical resistivity method

Zehua Wang et al.

MEASUREMENT (2020)

Add to Collection

Article Environmental Sciences

The sorption performance of corroded Gaomiaozi bentonite by evolved cement water at different temperatures: the case of europium removal

Zhao Sun et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Add to Collection

Article Construction & Building Technology

Experimental Study on Diffusion Process of Sulfate Ion in Cemented Gangue Backfill Material

Yuxia Guo et al.

ADVANCES IN CIVIL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Characterization of early age behavior of cemented paste backfill through the magnitude and frequency spectrum of ultrasonic P-wave

Baoxu Yan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Environmental Sciences

Prediction of compression and deformation behaviours of gangue backfill materials under multi-factor coupling effects for strata control and pollution reduction

Guohao Meng et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Strength and deformation behavior of cemented foam backfill in sub-zero environment

Shiyu Zhang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Construction & Building Technology

EDX/XRD-based identification of micrometer-sized domains in scanning electron micrographs of fired clay

Hawraa Kariem et al.

MATERIALS AND STRUCTURES (2020)

Add to Collection

Article Geochemistry & Geophysics

Influence of Solid Content, Cement/Tailings Ratio, and Curing Time on Rheology and Strength of Cemented Tailings Backfill

Jiajian Li et al.

MINERALS (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effects of curing under step-by-step load on mechanical and deformation properties of cemented gangue backfill column

Guo Yu-xia et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)

Add to Collection

Article Construction & Building Technology

Mechanical behavior, acoustic emission properties and damage evolution of cemented paste backfill considering structural feature

Jie Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Civil

Bearing mechanism and stability monitoring of cemented gangue-fly ash backfill column with stirrups in partial backfill engineering

Xianjie Du et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Failure characteristics of large unconfined cemented gangue backfill structure in partial backfill mining

Xianjie Du et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Computer Science, Information Systems

Flexural Behavior of Fiber Reinforced Cemented Tailings Backfill Under Three-Point Bending

Shuai Cao et al.

IEEE ACCESS (2019)

Add to Collection

Article Construction & Building Technology

Repair of heat-damaged RC columns using carbon nanotubes modified CFRP

Mohammad R. Irshidat et al.

MATERIALS AND STRUCTURES (2017)

Add to Collection

Article Construction & Building Technology

Ultrasonic broadband signals monitoring of glass-fiber reinforced cement (GRC) bending tests

V. Genoves et al.

CEMENT & CONCRETE COMPOSITES (2017)

Add to Collection

Article Environmental Sciences

Electrical resistivity characteristics of diesel oil-contaminated kaolin clay and a resistivity-based detection method

Zhibin Liu et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2015)

Add to Collection

Article Construction & Building Technology

Fracture process and reliability of concrete made from high grade recycled aggregate using acoustic emission technique under compression

Ni Nyoman Kencanawati et al.

MATERIALS AND STRUCTURES (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.