4.7 Article

Promoted hydrogen storage properties of MgH2 by Ti3+self-doped defect-mediated TiO2

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Solar-Driven Reversible Hydrogen Storage

Xiaoyue Zhang et al.

Summary: This paper demonstrates a concept of solar-driven reversible hydrogen storage of metal hydrides by utilizing the photothermal effect and catalytic role. The photothermal effect of Cu@MXene raises the temperature of the hydrogen storage material, while the hydrogen pump effect of Ti and TiHx species formed on the surface of MXene reduces the operating temperature, achieving efficient hydrogen storage.

ADVANCED MATERIALS (2023)

Article Chemistry, Physical

Sodium fluotitanate with the formation of multicomponent catalytic species for superior hydrogen storage of magnesium hydride

Yuhuan Wang et al.

Summary: In this study, sodium fluotitanate (Na2TiF6) was introduced into MgH2 through ball milling to enhance its hydrogen storage performance. The in-situ generated TiH2, MgF2, NaMgH3, and TiF4 catalytically active species can realize the regulation of kinetic and thermodynamic properties, leading to improved hydrogen storage properties. The starting hydrogen release temperature of MgH2-NTF-10 was significantly decreased to 226 degrees C, and about 6.1 wt% of hydrogen can be released at 300 degrees C in only 30 min. The reversible hydrogen storage performance of MgH2-NTF-10 after ten cycles showed 95% hydrogen storage capacity retention. The synergistic functions of multiphase active components from NTF additive may advance MgH2 further to practical applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Review Materials Science, Multidisciplinary

Impact of severe plastic deformation on kinetics and thermodynamics of hydrogen storage in magnesium and its alloys

Kaveh Edalati et al.

Summary: Magnesium and its alloys are extensively studied for solid-state hydrogen storage, but there are challenges in the kinetics and thermodynamics of hydrogenation and dehydrogenation. Severe plastic deformation methods have been utilized to improve the activation, air resistance, and kinetics of Mg-based hydrogen storage materials by introducing ultrafine/nanoscale grains and crystal lattice defects. These deformed materials, particularly with alloying additives or second-phase nanoparticles, exhibit fast hydrogen absorption/desorption kinetics and good cycling stability. The study also highlights the application of severe plastic deformation methods in hydrogen binding-energy engineering and the synthesis of new magnesium alloys for reversible low/room-temperature hydrogen storage.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Article Engineering, Environmental

Catalytic effect of bamboo-like carbon nanotubes loaded with NiFe nanoparticles on hydrogen storage properties of MgH2

Yaokun Fu et al.

Summary: Catalyst doping modification is an effective strategy to address the challenges of high desorption temperature and sluggish kinetics in MgH2, enabling its potential commercial application.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Physical

TiVNb-based high entropy alloys as catalysts for enhanced hydrogen storage in nanostructured MgH2

Jingxi Zhang et al.

Summary: In this study, equiatomic high entropy alloys (HEAs) such as TiVNbZrFe were used as catalysts to improve the kinetics of MgH2. The results showed that TiVNbZrFe alloy exhibited excellent catalytic effect, with a lower temperature and pressure required for hydrogen release and absorption. This alloy also demonstrated stable cycling properties with a significant reduction in activation energy compared to pure MgH2.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

Review Electrochemistry

Recent progress in transition-metal-oxide-based electrocatalysts for the oxygen evolution reaction in natural seawater splitting: A critical review

Meng Chen et al.

Summary: This critical review discusses the prospects of metal-oxide electrocatalysts for seawater splitting, focusing on their chemical properties, OER selectivity, anti-chlorine-corrosion performance, and reaction mechanisms. The review highlights metal oxides that operate at high current densities, near industrial application levels, based on special catalyst design strategies.

ESCIENCE (2023)

Review Chemistry, Multidisciplinary

Near-Infrared Light Responsive TiO2 for Efficient Solar Energy Utilization

Longbo Jiang et al.

Summary: TiO2, a widely used semiconductor photocatalyst in the field of ultraviolet photocatalysis, faces challenges like wide bandgap and fast recombination of charge carriers, affecting its solar light utilization. Enhancing the overall solar spectrum utilization of TiO2, especially in the near-infrared region, is crucial for efficient solar energy conversion. Strategies such as hybridization with other semiconductors and bandgap engineering are discussed to improve NIR light capture of TiO2-based photocatalysts in this review, along with their applications in various fields and future development prospects.

ADVANCED FUNCTIONAL MATERIALS (2022)

Review Materials Science, Multidisciplinary

Nanomaterials by severe plastic deformation: review of historical developments and recent advances

Kaveh Edalati et al.

Summary: This article comprehensively reviews recent advances in the development of ultrafine-grained and nanostructured materials through severe plastic deformation and provides a brief history of this field. Severe plastic deformation methods have been effective in producing materials with advanced mechanical and functional properties, and the field of NanoSPD has experienced significant progress in the past two decades.

MATERIALS RESEARCH LETTERS (2022)

Article Chemistry, Physical

Ultra-fine TiO2 nanoparticles supported on three-dimensionally ordered macroporous structure for improving the hydrogen storage performance of MgH2

Yuting Shao et al.

Summary: Three-dimensionally ordered macroporous (3DOM) TiO2, prepared by colloidal crystal template method, can enhance the hydrogen storage properties of MgH2 by providing numerous reactive sites for hydrogen de/absorption. The electron transfer on contact interface between MgH2 and TiO2 plays a crucial role in promoting dehydrogenation. This finding is of great significance for developing highly efficient catalysts based on 3DOM structure in hydrogen storage materials.

APPLIED SURFACE SCIENCE (2022)

Article Engineering, Environmental

Assembling UiO-66@TiO2 nanocomposites for efficient photocatalytic degradation of dimethyl sulfide

Zun Man et al.

Summary: The photocatalytic activity of titanium dioxide (TiO2) can be greatly improved by coupling with UiO-66 to purify odor pollutants containing reduced sulfur compounds (RSCs). UiO-66@TiO2 nanocomposites with different blending ratios were synthesized, and the U1T3 composites showed the highest photocatalytic activity compared to pristine UiO-66 and TiO2. The photocatalytic activity was found to be enhanced with increased relative humidity up to 60%, but excessive water at 90% relative humidity weakened the photocatalytic effects. UiO-66@TiO2 nanocomposites with enhanced photocatalytic performance could promote the practical applications of MOF-based photocatalysts for the degradation of odor pollutants.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Multidisciplinary

A Unique Nanoflake-Shape Bimetallic Ti-Nb Oxide of Superior Catalytic Effect for Hydrogen Storage of MgH2

Kaicheng Xian et al.

Summary: This research synthesizes a 2D nanoflake-shaped bimetallic oxide catalyst (TiNb2O7) with high surface area for MgH2 hydrogen storage. The addition of TiNb2O7 nanoflakes greatly improves the hydrogen storage performance of MgH2, lowering the onset dehydrogenation temperature by 100 degrees C and increasing the dehydrogenation capacity and cycling stability.

SMALL (2022)

Article Chemistry, Physical

Boron nitride supported nickel nanoparticles as catalyst for enhancing the hydrogen storage properties of MgH2

Zhen Jia et al.

Summary: Layered boron nitride nanosheets loaded with fine nickel particles were synthesized and introduced into MgH2, improving the hydrogen storage properties and kinetics of MgH2. The composite exhibited enhanced cycling performance and reduced activation energy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Nanoscience & Nanotechnology

Oxygen Vacancy-Rich 2D TiO2 Nanosheets: A Bridge Toward High Stability and Rapid Hydrogen Storage Kinetics of Nano-Confined MgH2

Li Ren et al.

Summary: In this study, 2D TiO2 nanosheets with abundant oxygen vacancies were used to fabricate a flower-like MgH2/TiO2 heterostructure with enhanced hydrogen storage performances. The heterostructure exhibited improved hydrogen desorption temperature, desorption rate, and capacity retention. The synergistic effects of multi-valance of Ti species, accelerated electron transportation caused by oxygen vacancies, formation of catalytic Mg-Ti oxides, and stabilized MgH2 NPs confined by TiO2 nanosheets contributed to the high stability and kinetically accelerated hydrogen storage performances of the composite. The strategy of using 2D substrates with abundant defects to support nano-sized energy storage materials to build heterostructure is promising for the design of high-performance energy materials.

NANO-MICRO LETTERS (2022)

Article Chemistry, Physical

Effects of metal-based additives on dehydrogenation process of 2NaBH4 + MgH2 system

Yuanyuan Shang et al.

Summary: This study systematically investigates the effect of selected metal-based additives on the dehydrogenation properties of the reactive hydride composite (RHC) model system 2NaBH4+MgH2. The addition of 3TiCl3·AlCl3 enhances the dehydrogenation kinetics and changes the controlling mechanism of the second dehydrogenation step. Microstructural analysis using high-resolution transmission electron microscopy (HRTEM) reveals significant differences in the MgB2 morphology between the doped and undoped systems.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Engineering, Environmental

Microwave-assisted reduction of Ti species in MgH2-TiO2 composite and its effect on hydrogen storage

Ren Zou et al.

Summary: This work aims to investigate the dehydrogenation behavior and chemical state changes of a MgH2-TiO2 composite under microwave irradiation. It is found that reduced titanium oxide formed during ball milling can absorb microwave radiation and act as hot spots, resulting in significant dehydrogenation of the MgH2 sample. Furthermore, microwave irradiation promotes the reduction of Ti4+ and facilitates electron transfer between Mg2+ and H- for improved hydrogen sorption.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Regulation of the integrated hydrogen storage properties of magnesium hydride using 3D self-assembled amorphous carbon-embedded porous niobium pentoxide

Xiaobin Wen et al.

Summary: In this study, different types of porous niobium pentoxide were prepared to improve the hydrogen storage properties of magnesium hydride. It was found that carbon-embedded porous niobium pentoxide played a crucial role in enhancing the hydrogen storage performance of magnesium hydride.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Inorganic & Nuclear

Unraveling the degradation mechanism for the hydrogen storage property of Fe nanocatalyst-modified MgH2

Mengchen Song et al.

Summary: This study investigates the mechanism of kinetics decline during cycling of MgH2, revealing the grain growth in MgH2 and Fe nanocatalysts as the main cause of capacity loss and kinetic degradation.

INORGANIC CHEMISTRY FRONTIERS (2022)

Article Chemistry, Physical

Few-layer MXene Ti3C2Tx supported Ni@C nanoflakes as a catalyst for hydrogen desorption of MgH2

Cong Peng et al.

Summary: This research proposes a new approach to synthesize Ni@C/FL-Ti3C2Tx composite material, which can serve as a highly efficient catalyst for hydrogen desorption of MgH2, showing superior hydrogen desorption kinetics and excellent cycling stability. Further study reveals that the improvement of hydrogen storage properties is mainly attributed to the in situ formed Mg2NiH4 and metallic Ti nanoparticles, as well as the FL-Ti3C2Tx nanosheets themselves.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Multidisciplinary

Nanoconfined and in Situ Catalyzed MgH2 Self-Assembled on 3D Ti3C2 MXene Folded Nanosheets with Enhanced Hydrogen Sorption Performances

Wen Zhu et al.

Summary: This study introduces a novel method to address the stacking and oxidation issues of MXenes in nanoconfinement, successfully achieving the anchored growth of MgH2 nanoparticles on the surface of 3D Ti3C2Tx, leading to improved hydrogen sorption performances.

ACS NANO (2021)

Review Chemistry, Multidisciplinary

Current Design Strategies for Rechargeable Magnesium-Based Batteries

Jinlei Zhang et al.

Summary: This review explores various material design strategies to enhance the performance of rechargeable Mg-based batteries, with a focus on both cathode and anode materials. It comprehensively examines different concepts and summarizes the advances towards Mg-S and Mg-Se batteries. Analyzing the pros and cons of these strategies provides valuable insights for future research in Mg-based batteries and other multivalent-ion battery chemistries.

ACS NANO (2021)

Article Nanoscience & Nanotechnology

Combinations of V2C and Ti3C2 MXenes for Boosting the Hydrogen Storage Performances of MgH2

Haizhen Liu et al.

Summary: The combination of V2C and Ti3C2 in MgH2 significantly improves hydrogen storage performance, enhancing hydrogen desorption rate and cycling stability. V2C and Ti3C2 promote the hydrogen-releasing process of MgH2 and may facilitate the transfer of hydrogen atoms or molecules through grain boundaries and interfaces. This study provides new insights into the hydrogen storage behaviors and mechanisms of MgH2 catalyzed by MXenes.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Non-enzymatic photoelectrochemical sensors based on Schiff base and chitosan co-decorated TiO2 nanosheets for dopamine detection

Xing Shang et al.

Summary: TiO2 nanosheets with high percentage of {001} facets exhibit high photoelectrochemical activity, but can only utilize ultraviolet light due to wide band gap. By synthesizing a new Schiff base monocrystal to sensitize TiO2 NSs, PEC sensors were developed for dopamine detection. The sensors, further decorated with chitosan, showed enhanced selectivity and a wide detection range from 0.0005 to 5.0 mM, with a detection limit of 0.206 mu M (S/N = 3).

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2021)

Article Chemistry, Inorganic & Nuclear

Improvement of the hydrogen storage characteristics of MgH2 with a flake Ni nano-catalyst composite

Xinglin Yang et al.

Summary: The hydrogen storage performance of MgH2 can be effectively improved by doping with a flake Ni nano-catalyst, achieving high hydrogen release and absorption rates at elevated temperatures. The addition of Ni also lowers the activation energies for hydrogen absorption and dehydrogenation, while forming Mg2Ni/Mg2NiH4 on the surface to act as a hydrogen pump, accelerating the reaction rates.

DALTON TRANSACTIONS (2021)

Article Materials Science, Multidisciplinary

Phase Transformations in MgH2-TiH2 Hydrogen Storage System by High-Pressure Torsion Process

Kouki Kitabayashi et al.

ADVANCED ENGINEERING MATERIALS (2020)

Article Chemistry, Applied

Superior de/hydrogenation performances of MgH2 catalyzed by 3D flower-like TiO2@C nanostructures

Meng Zhang et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Review Chemistry, Physical

Magnesium -based hydrogen storage compounds: A review

Liuzhang Ouyang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Physical

Chemically transformed additive phases in Mg2TiO4 and MgTiO3 loaded hydrogen storage system MgH2

D. Pukazhselvan et al.

APPLIED SURFACE SCIENCE (2019)

Review Chemistry, Applied

Characteristics of MOF, MWCNT and graphene containing materials for hydrogen storage: A review

Kranthi Kumar Gangu et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

Article Nanoscience & Nanotechnology

Remarkable Synergistic Catalysis of Ni-Doped Ultrafine TiO2 on Hydrogen Sorption Kinetics of MgH2

Jiguang Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Physical

Morphology and microstructure of Mg-Ti-H films deposited by microwave plasma-assisted co-sputtering

I. Iliescu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Chemistry, Physical

Adsorption of C2 gases over CeO2-based catalysts: synergism of cationic sites and anionic vacancies

Manjusha C. Padole et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Review Chemistry, Physical

Light metal borohydrides/amides combined hydrogen storage systems: composition, structure and properties

Shujun Qiu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Review Nanoscience & Nanotechnology

Hydrogen carriers

Teng He et al.

NATURE REVIEWS MATERIALS (2016)

Review Chemistry, Physical

Thermodynamic Tuning of Mg-Based Hydrogen Storage Alloys: A Review

Min Zhu et al.

MATERIALS (2013)

Article Chemistry, Multidisciplinary

Solid-state hydrogen storage for mobile applications: Quo Vadis?

Claudia Weidenthaler et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Review Chemistry, Multidisciplinary

Advanced Materials for Energy Storage

Chang Liu et al.

ADVANCED MATERIALS (2010)

Article Chemistry, Multidisciplinary

Improved hydrogen storage property of Li-Mg-B-H system by milling with titanium trifluoride

Peijun Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2009)