☆ 4.7 Article

Experimental study and modelling of anisotropic behaviour of aluminium-lithium alloys in creep age forming

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Related references

Note: Only part of the references are listed.

Review Multidisciplinary Sciences

A review of manufacturing processes, mechanical properties and precipitations for aluminum lithium alloys used in aeronautic applications

El Arbi Hajjioui et al.

Summary: Military applications and the aeronautic industry show increasing interest in aluminum lithium alloys due to the improved mechanical properties provided by the presence of Lithium. This paper aims to review the applications, characterization, precipitation, and impact on mechanical properties and grain refinement of Al-Li alloys. It also investigates and presents various manufacturing processes, methods, and tests. The latest research on Al-Li for different processes conducted by scientists in recent years is also reviewed.

HELIYON (2023)

Add to Collection

Article Mechanics

Anisotropic plasticity and fracture modelling of cold rolled AA5754

Borja Erice et al.

Summary: The study investigated the influence of anisotropy, loading rate, and stress state on the ductile fracture of AA5754 cold-rolled sheets. Plasticity was analyzed experimentally through biaxial and uniaxial tensile testing of specimens machined at various orientations. The material's strain rate dependency was evaluated through testing of notched tension specimens at different loading rates. Finite element simulations were performed to obtain stress and strain histories from critical elements in various loading conditions, and the anisotropic fracture initiation criterion was modified to account for loading rate effects.

ENGINEERING FRACTURE MECHANICS (2023)

Add to Collection

Article Engineering, Aerospace

Advances and challenges on springback control for creep age forming of aluminum alloy

Liwen Zhang et al.

Summary: Creep age forming (CAF) is an advanced forming technology that combines creep deformation and age hardening processes. It has many advantages such as low residual stress, dimensional stability, good performance, and short production cycle, making it optimal for manufacturing large-scale complicated thin-walled components of high strength aluminum alloys in aviation and aerospace industries. However, a major challenge of CAF is the occurrence of springback after unloading, which affects the accuracy of shaping components.

CHINESE JOURNAL OF AERONAUTICS (2022)

Add to Collection

Article Engineering, Mechanical

Modeling the anisotropic plasticity and damage of AA7075 alloy in hot forming

Hai Rong et al.

Summary: The theory of unified visco-plastic damage constitutive equations has been used to model the thermal flow behavior and damage evolution of materials, but the anisotropic properties were often ignored. A novel damage correction formula was proposed in this paper, integrated with a continuum damage model to establish an improved anisotropic damage constitutive model. Material constants were determined based on experimental data for accurate prediction of forming limit curves and hot forming simulations of AA7075 alloy.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Civil

Anisotropic hardening and evolution of r-values for sheet metal based on evolving non-associated Hill48 model

Zhenkai Mu et al.

Summary: The deformation behavior and yield loci of DC06 steel sheet were investigated through uniaxial and biaxial tensile tests. A proposed inverse method was used to calculate the continuous evolution of r-values, which is more accurate and simpler compared with previous methods. An evolving non-associated Hill48 anisotropic plasticity model was formulated to study the anisotropic hardening, evolution of r-values, and subsequent yield loci. Experimental and prediction results show that the developed model accurately captures the distortional hardening, evolution of r-values, and yield loci. The effect of distortional hardening and evolution of r-values on subsequent yield surfaces and plastic potential is also analyzed.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

Strong in-plane anisotropy of creep ageing behavior in largely pre-deformed Al-Cu alloy: Experiments and constitutive modeling

Longhui Chen et al.

Summary: Deformation anisotropy is a key factor affecting the dimensional accuracy and performance consistency of aluminum alloy components. Understanding and modeling the anisotropic creep ageing behavior is crucial for precise creep age forming. In this study, creep ageing responses were investigated in a heavily cold-rolled Al-Cu alloy, revealing significant in-plane creep anisotropy and slight anisotropy of yield strength. Microstructural analysis showed that the strong creep anisotropy is mainly determined by the preferential alignment of dislocation cells. A mechanism-based constitutive model was established to accurately describe the in-plane creep anisotropy.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Investigation of stress effect on creep, precipitation and dislocation evolution of Al-Li alloy during creep age forming

Xi Wang et al.

Summary: The creep-ageing behavior of a 2xxx series 3rd generation Al-Li alloy in T8 state was experimentally investigated under different stresses, showing significant differences in creep strain with increasing stress levels. The dominant deformation mechanism shifted from diffusion creep to dislocation creep at higher stresses, revealing a strong stress dependent characteristic in creep deformation and evolution of dislocation density and precipitate size during creep-ageing.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Engineering, Civil

Phase transformation and plastic behavior of QP steel sheets: Transformation kinetics-informed modeling and forming limit prediction

Ji He et al.

Summary: This study successfully addressed the contradiction in the previous model by introducing martensitic transformation and utilizing an asymmetric yield function based on the proposed work-conjugate framework. The yield surface of QP980 steel was stabilized using this framework, and the correlation between microstructure evolution, microstructure volume fraction, and stress-strain response was accurately predicted. This study provided a framework to understand the impact of microstructure evolution on the final forming limits of QP steel sheets and suggested that optimizing the strain path design can enhance the plastic limit before localized necking.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

Improved creep behaviour for a high strength Al-Li alloy in creep age forming: Experimental studies and constitutive modelling

Xi Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Engineering, Mechanical

Constitutive modeling of commercial pure titanium sheet based on non-associated flow rule and differential hardening

Jinjae Kim et al.

Summary: The commercial-pure titanium (CP-Ti) sheet is highly regarded in biomedical and aerospace industries for its lightweight, high strength, good formability, and corrosion resistance. This study developed a material model considering the differential hardening behavior and changing R-value of CP-Ti sheet, and used it to simulate a deep drawing process. The comparison results showed that the developed material model accurately predicted the mechanical behavior in forming simulations.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

A general yield function with differential and anisotropic hardening for strength modelling under various stress states with non-associated flow rule

Yanshan Lou et al.

Summary: A stress invariant-based yield function is proposed in this research to precisely model the differential strain hardening behavior under different stress states. The convex domain of the proposed function is computed using a numerical convex analysis method, and the parameters of the function are analytically computed based on experimental data. The function is successfully applied to simulate the plastic behavior of different metal materials and accurately predict experimental responses.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling stress anisotropy, strength differential, and anisotropic hardening by coupling quadratic and stress-invariant-based yield functions under non-associated flow rule

Yong Hou et al.

Summary: In this work, a simple coupling of anisotropic quadratic and isotropic stress-invariant-based yield functions is proposed to capture the shapes of yield surface for diverse metallic materials with enhanced flexibility. The proposed asymmetric anisotropic yield function is validated with automotive sheet metals, showing accurate prediction of anisotropy in stress and yield surface evolution.

MECHANICS OF MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropy in creep-aging behavior of Al-Li alloy under different stress levels: experimental and constitutive modeling

Nanhui Peng et al.

Summary: The anisotropy in creep aging behavior and microstructural evolution of AA2195-T34 Al-Li alloy plates under different stress levels at 180 degrees C were systematically investigated. The results showed that the creep strain and strength exhibited anisotropic behavior depending on the angle relative to the rolling direction. A constitutive model considering the anisotropy of creep deformation and aging strengthening was established, providing accurate predictions.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Engineering, Industrial

Forming limit prediction by the Marciniak-Kuczynski model coupled with the evolving non-associated Hill48 plasticity model

Fuhui Shen et al.

Summary: This study investigates the numerical prediction of forming limits by combining the Marciniak-Kuczynski localization criterion with an evolving non-associated plasticity model. The results show that both the flow potential and yield locus play a critical role in determining the final localization of the material under study.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Industrial

Formability prediction of substrate-supported metal layers using a non-associated plastic flow rule

Mohamed Ben Bettaieb et al.

Summary: This study investigates the impact of adhering an elastomer substrate to metal sheets on the ductility of the metal layer. Numerical analysis is used to predict the localization of plastic strain within the metal layer. The results show that the ductility limits predicted by the non-associated elasto-plastic model are lower than those determined by an associated plasticity model, and that adhering an elastomer layer can delay the onset of plastic strain localization.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Strong stress-level dependence of creep-ageing behavior in Al-Cu-Li alloy

Peipei Ma et al.

Summary: High-stress-aged Al-Cu-Li alloys exhibit a rapid strain increase, while the stress-orienting effect of precipitates in low-stress-aged samples leads to a reduced precipitation strengthening potential.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Engineering, Industrial

Constitutive modelling and its application to stress-relaxation age forming of AA6082 with elastic and plastic loadings

Qi Rong et al.

Summary: This study proposes a novel constitutive model that predicts the stress-relaxation ageing behavior of AA6082-T6 under elastic and plastic loading strains, extending its application to complex-shaped panels. The model considers the effects of loading strain levels on microstructural evolution, yield strength, and stress-relaxation behavior during the SRA process. The developed model demonstrates feasibility for SRAF in industrial applications with highly demanded complex-shaped components.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

A non-associated constitutive model considering anisotropic hardening for orthotropic anisotropic materials in sheet metal forming

Boxun Wu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of pre-strain on the surface residual stress and corrosion behavior of an Al-Zn-Mg-Cu alloy plate

Lianghua Lin et al.

MATERIALS CHARACTERIZATION (2020)

Add to Collection

Article Engineering, Mechanical

Stress-relaxation ageing behavior and microstructural evolution under varying initial stresses in an Al-Cu alloy: Experiments and modeling

Youliang Yang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Add to Collection

Article Engineering, Mechanical

Interpolation-based plane stress anisotropic yield models

Sai Hao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropy in creep ageing behavior of textured Al-Cu alloy under different stress states

Xueying Chen et al.

MATERIALS CHARACTERIZATION (2020)

Add to Collection

Article Mechanics

Non associated-anisotropic plasticity model fully coupled with isotropic ductile damage for sheet metal forming applications

O. Ghorbel et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

Add to Collection

Article Engineering, Manufacturing

Effect of pin arrangement on formed shape with sparse multi-point flexible tool for creep age forming

Yong Li et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical study on the deformation mechanism of straight flanging by incremental sheet forming

Kai Han et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Automation & Control Systems

An accelerated springback compensation method for creep age forming

Yong Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Manufacturing

An investigation of creep age forming of AA7B04 stiffened plates: Experiment and FE modelling

Fenggong Lyu et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

Add to Collection

Article Mechanics

An evolving non-associated Hill48 plasticity model accounting for anisotropic hardening and r-value evolution and its application to forming limit prediction

Junhe Lian et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Mechanics

On the calculation of plastic strain by simple method under non-associated flow rule

Qi Hu et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2018)

Add to Collection

Article Engineering, Mechanical

FE simulation of asymmetric creep-ageing behaviour of AA2050 and its application to creep age forming

Yong Li et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Review Multidisciplinary Sciences

Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review

Ali Abd El-Aty et al.

JOURNAL OF ADVANCED RESEARCH (2018)

Add to Collection

Article Engineering, Mechanical

A generalisation of the Hill's quadratic yield function for planar plastic anisotropy to consider loading direction

R. P. R. Cardoso et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Add to Collection

Article Engineering, Mechanical

Material modeling of 6016-O and 6016-T4 aluminum alloy sheets and application to hole expansion forming simulation

Toshihiko Kuwabara et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Engineering, Mechanical

A yield criterion through coupling of quadratic and non quadratic functions for anisotropic hardening with non associated flow rule

Eun-Ho Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Engineering, Mechanical

A unified constitutive model for asymmetric tension and compression creep-ageing behaviour of naturally aged Al-Cu-Li alloy

Yong Li et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

The effects of pre-deformation on the creep aging behavior and mechanical properties of Al-Li-S4 alloys

Libin Hu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Proceedings Paper Engineering, Manufacturing

A METHOD TO DETERMINE LANKFORD COEFFICIENTS (R-VALUES) FOR ULTRA HIGH STRENGTH LOW ALLOY (UHSLA) STEELS

M. Goesling

36TH IDDRG CONFERENCE - MATERIALS MODELLING AND TESTING FOR SHEET METAL FORMING (2017)

Add to Collection

Article Engineering, Manufacturing

Parameter reduction for the Yld2004-18p yield criterion

Ton van den Boogaard et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2016)

Add to Collection

Article Engineering, Mechanical

A non-quadratic constitutive model under non-associated flow rule of sheet metals with anisotropic hardening: Modeling and experimental validation

Junying Min et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

Add to Collection

Article Automation & Control Systems

A method for designing lightweight and flexible creep-age forming tools using mechanical splines and sparse controlling points

Aaron C. L. Lam et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Article Engineering, Mechanical

Influences of residual stresses and initial distortion on springback prediction of 7B04-T651 aluminium plates in creep-age forming

Aaron C. L. Lam et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

Add to Collection

Article Mechanics

Non-associated flow rule with symmetric stiffness modulus for isotropic-kinematic hardening and its application for earing in circular cup drawing

Taejoon Park et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

Add to Collection

Article Materials Science, Multidisciplinary

The Evolution of Al-Li Base Products for Aerospace and Space Applications

Roberto J. Rioja et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

Add to Collection

Review Engineering, Manufacturing

A review of the development of creep age forming: Experimentation, modelling and applications

Lihua Zhan et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)

Add to Collection

Article Engineering, Mechanical

Anisotropic hardening and non-associated flow in proportional loading of sheet metals

Thomas B. Stoughton et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2009)

Add to Collection

Article Engineering, Mechanical

A finite element formulation based on non-associated plasticity for sheet metal forming

Vedrana Cvitanic et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

Add to Collection

Article Engineering, Aerospace

Ageformable panels for commercial aircraft

F. Eberl et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2008)

Add to Collection

Article Engineering, Mechanical

Numerical analysis of diffuse and localized necking in orthotropic sheet metals

Holger Aretz

INTERNATIONAL JOURNAL OF PLASTICITY (2007)

Add to Collection

Article Engineering, Mechanical

Linear transfomation-based anisotropic yield functions

F Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2005)

Add to Collection

Article Engineering, Mechanical

Plane stress yield function for aluminum alloy sheets-part IT: FE formulation and its implementation

JW Yoon et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2004)

Add to Collection

Article Engineering, Mechanical

Plane stress yield function for aluminum alloy sheets - part 1: theory

F Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2003)

Add to Collection

Article Engineering, Mechanical

A non-associated flow rule for sheet metal forming

TB Stoughton

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.