Monitoring biofilm growth and dispersal in real-time with impedance biosensors

Microbial biofilm contamination is a widespread problem that requires precise and prompt detection techniques to effectively control its growth. Microfabricated electrochemical impedance spectroscopy (EIS) biosensors offer promise as a tool for early biofilm detection and monitoring of elimination. This study utilized a custom flow cell system with integrated sensors to make real-time impedance measurements of biofilm growth under flow conditions, which were correlated with confocal laser scanning microscopy (CLSM) imaging. Biofilm growth on EIS biosensors in basic aqueous growth media (tryptic soy broth, TSB) and an oil-water emulsion (metalworking fluid, MWF) attenuated in a sigmoidal decay pattern, which lead to an & SIM;22-25% decrease in impedance after 24 Hrs. Subsequent treatment of established biofilms increased the impedance by & SIM;14% and & SIM;41% in TSB and MWF, respectively. In the presence of furanone C-30, a quorum-sensing inhibitor (QSI), impedance remained unchanged from the initial time point for 18 Hrs in TSB and 72 Hrs in MWF. Biofilm changes enumerated from CLSM imaging corroborated impedance measurements, with treatment significantly reducing biofilm. Overall, these results support the application of microfabricated EIS biosensors for evaluating the growth and dispersal of biofilm in situ and demonstrate potential for use in industrial settings.One-Sentence Summary This study demonstrates the use of microfabricated electrochemical impedance spectroscopy (EIS) biosensors for real-time monitoring and treatment evaluation of biofilm growth, offering valuable insights for biofilm control in industrial settings. Graphical Abstract The accurate real-time detection of biofilm growth and removal is effectively demonstrated through the combination of impedance biosensors and high-resolution confocal laser scanning microscopy.

Automated summary

This study demonstrates the use of microfabricated electrochemical impedance spectroscopy (EIS) biosensors for real-time monitoring and treatment evaluation of biofilm growth, offering valuable insights for biofilm control in industrial settings. The results show that biofilm growth on EIS biosensors attenuated in a sigmoidal decay pattern and subsequent treatment increased impedance. Addition of a quorum-sensing inhibitor (QSI) led to no change in impedance, and biofilm changes from confocal laser scanning microscopy corroborated impedance measurements.