☆ 4.8 Article

Coregulation of Li/Li+ Spatial Distribution by Electric Field Gradient with Homogenized Li-Ion Flux for Dendrite-Free Li Metal Anodes

SMALL (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Ion-Conductive Polytitanosiloxane Networks Enable a Robust Solid-Electrolyte Interface for Long-Cycling Lithium Metal Anodes

Yuan Zhong et al.

Summary: A reliable solid-electrolyte interphase (SEI) connected by polytitanosiloxane (PTS) was constructed in this study, resulting in ultra-stable cycling performance of Li metal batteries with TEOS/TEOT electrolyte additives. This research offers a new method for regulating the interfacial properties of Li anodes.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Sandwiched Li plating between Lithiophilic-Lithiophobic gradient Silver@Fullerene interphase layer for ultrastable lithium metal anodes

Shuzhang Niu et al.

Summary: The study presents a silver@fullerene (Ag@C60) interphase layer to guide lithium nucleation, leading to stable cyclic life and high-rate performance. The deliberate design ensures uniform lithium deposition and provides a feasible approach for practical use of lithium-metal anodes in high-energy-density batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

CuCl2-Modified Lithium Metal Anode via Dynamic Protection Mechanisms for Dendrite-Free Long-Life Charging/Discharge Processes

Shangshu Qian et al.

Summary: By constructing a multi-functional protection layer on the surface of lithium metal, the formation and growth of lithium dendrites can be controlled, and the diffusion and distribution of lithium ions can be enhanced, achieving a stable and high-performance lithium metal anode.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Inorganic-Rich and Flexible Solid-Electrolyte Interphase Formed Over Dipole-Dipole Interaction for Highly Stable Lithium-Metal Anodes

Jinqi Zhu et al.

Summary: A PAN/CNTs-based SiO2-modified vertical-cavity film (PCS-VCF) with a network structure is prepared to address the challenges of uncontrollable lithium dendrite growth and unstable solid electrolyte interfaces (SEI) in Li metal batteries (LMBs). The PCS-VCF stabilizes the Li metal anodes by regulating the chemical environment in carbonate electrolytes and suppressing the volume expansion of Li metal. This results in a high-performance Li metal anode with dendrite-free morphology and improved stability of the electrode/electrolyte interface.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A 2D Ultrathin Nanopatterned Interlayer to Suppress Lithium Dendrite Growth in High-Energy Lithium-Metal Anodes

Kyu Hyo Han et al.

Summary: This study presents a novel strategy for robust and ultrathin multilayered protective structures to effectively suppress dendritic lithium growth in lithium-metal battery anodes. The protective layer consisting of silver nanoparticles, reduced graphene oxide films, and self-assembled block-copolymer layers provides stable and well-defined pathways for lithium-ion transport, resulting in outstanding cycling stability and enhanced rate capability of the modified lithium-metal anodes.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Roll-To-Roll Fabrication of Zero-Volume-Expansion Lithium-Composite Anodes to Realize High-Energy-Density Flexible and Stable Lithium-Metal Batteries

Chao Luo et al.

Summary: A facile roll-to-roll fabrication method was proposed to achieve a zero-volume-expansion Li-metal-composite anode, which demonstrated outstanding electrochemical and mechanical stability. The sandwich-like structure of the anode effectively prevented dendritic deposition and volume change, leading to high-performance flexible lithium-metal batteries.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Built-In Stable Lithiophilic Sites in 3D Current Collectors for Dendrite Free Li Metal Electrode

Jiang-Peng Wang et al.

Summary: This study demonstrates a 3D porous network based on carbon fiber with stable lithiophilic sites during cycling. The introduced zinc species are redistributed throughout the network and function as lithiophilic sites for uniform lithium nucleation and growth. The 3D network also has a multi-scale porous structure that improves the space utilization of the electrode. The symmetric cells based on this 3D anode exhibit excellent cycling performance, especially at high rates.

SMALL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Pomegranate-Inspired Graphene Parcel Enables High-Performance Dendrite-Free Lithium Metal Anodes

Long Zhang et al.

Summary: Inspired by the squashy pomegranate structure, this study introduces a novel loading strategy using porous reduced graphene oxide/Au composite microrods as storage parcels to construct dendrite-free lithium (Li) metal anodes. The anodes exhibit high mass loading, low volume change, and excellent cycling stability, with a specific capacity of approximately 2140 mA h g(-1) and voltage hysteresis as low as 20 mV.

ADVANCED SCIENCE (2022)

Add to Collection

Review Electrochemistry

Controlling Li deposition below the interface

Wenzhuo Cao et al.

Summary: This paper examines the behaviors, mechanisms, and influencing factors of Li plating/stripping and proposes general strategies to control Li deposition. It is essential to have comprehensive design strategies for the electrode, electrolyte, and their interface. Three dimensional (3D) anodes and artificial interface engineering can reduce the risk of Li deposition, while electrolyte engineering favors Li transport and suppresses dendrites, serving as the final barrier to uncontrolled Li deposition.

ESCIENCE (2022)

Add to Collection

Review Chemistry, Applied

Artificial interphases enable dendrite-free Li-metal anodes

Qiankui Zhang et al.

Summary: This review summarizes strategies developed recently to stabilize the Li/electrolyte interface by constructing protective interphases on Li-metal anodes. It outlines the current understanding of the instability of the Li/electrolyte interface, illustrates artificial interphases constructed recently, and prospects possible approaches to acquire more efficiently protective interphases.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Gradient Solid Electrolyte Interphase and Lithium-Ion Solvation Regulated by Bisfluoroacetamide for Stable Lithium Metal Batteries

Fang Li et al.

Summary: This study focuses on the impact of bisfluoroacetamide (BFA) as an electrolyte additive on the solid electrolyte interphase (SEI) structure. By constructing a gradient SEI structure, it achieves better Li ion capture and transportation effects.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Dendrite-free lithium deposition enabled by a vertically aligned graphene pillar architecture

Kui Lin et al.

Summary: An effective and scalable electrospraying strategy was developed to fabricate vertically aligned graphene pillars for the lithium metal anode, which demonstrated improved cycling stability and high Li utilization efficiency.

CARBON (2021)

Add to Collection

Review Chemistry, Physical

A Growing Appreciation for the Role of LiF in the Solid Electrolyte Interphase

Jian Tan et al.

Summary: Rechargeable lithium batteries have transformed energy storage technology, but their further commercialization is hindered by short lifetime and safety issues, mainly due to the unstable solid-electrolyte interphase (SEI) and uncontrolled lithium dendrite growth. Research on SEI worldwide has focused on its debated structure and composition, particularly the role of the main component LiF. This review covers the development history of the SEI model, fundamental understanding of SEI, categorization of anode materials generating LiF in SEI, characterization techniques of SEI layers, transport mechanism of Li+ ions within SEI, physical properties of LiF, and analysis of LiF sources, offering insights for future research directions to promote large-scale applications of lithium metal batteries.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Coupling a Three-Dimensional Nanopillar and Robust Film to Guide Li-Ion Flux for Dendrite-Free Lithium Metal Anodes

Kemeng Liao et al.

Summary: A synergistic strategy combining a 3D nanocopper layer and a robust polymer protective layer is proposed to achieve dendritic-free Li metal anodes, demonstrating outstanding cycling stability.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dendrite-Free Reverse Lithium Deposition Induced by Ion Rectification Layer toward Superior Lithium Metal Batteries

Liang Lin et al.

Summary: A modified separator with continuous zinc nanoparticles-assembled film has been proposed to suppress lithium dendrites and improve the cycling stability of Li metal batteries, achieving excellent electrochemical performance through dendrite-free reverse Li deposition and homogeneous Li nucleation regulation.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Oxygen-Enriched α-MoO3-x nanobelts suppress lithium dendrite formation in stable lithium-metal batteries

Rohan Paste et al.

Summary: In this study, MoO3 nanobelts were used to passivate Li metal anodes, effectively suppressing the formation of Li dendrites and improving stability. The MoO3-coated Li anode exhibited minimal surface degradation and low overpotential in symmetrical cells, showing promising potential for long cycle life and high coulombic efficiency in Li-metal batteries.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Negatively charged polymeric interphase for regulated uniform lithium-ion transport in stable lithium metal batteries

Xinru Li et al.

Summary: Coating Li metal anode with a negatively charged artificial solid electrolyte interphase (ASEI) can stabilize the Li-metal anode and provide a highly uniform surface potential distribution, which may improve safety and durability in practical applications.

NANO ENERGY (2021)

Add to Collection

Review Electrochemistry

Nitrate additives for lithium batteries: Mechanisms, applications, and prospects

Xiang Li et al.

Summary: This review provides an overview of the impact and applications of nitrates in lithium batteries, focusing on their roles in the solid-electrolyte interphase and cathode-electrolyte interphase, as well as strategies for regulating solvation behavior.

ESCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Boosting the Electrochemical Performance of Li- and Mn-Rich Cathodes by a Three-in-One Strategy

Wei He et al.

Summary: This study proposes a three-in-one method combining cation-polyanion co-doping, defect construction, and stress engineering to address the capacity loss, structural mismatch, and stress accumulation issues in Li- and Mn-rich cathodes. The co-doped Na+/SO42- stabilizes the framework, enhances capacity and voltage stability, while induced defects activate more reaction sites and improve electrochemical performance. The unique defect bands and crystal bands structure alleviate stress accumulation, resulting in high-capacity retention and low voltage attenuation after cycling.

NANO-MICRO LETTERS (2021)

Add to Collection

Review Chemistry, Physical

Multifunctional roles of carbon-based hosts for Li-metal anodes: A review

Xiaolin Yan et al.

Summary: The paper discusses the critical role of carbon-based hosts in improving the performance of Li-metal anodes, analyzing the main failure mechanisms of Li-metal anodes and the advantages and strategies of carbon-based hosts in addressing challenges. It also reviews the functions, limitations, and recent research progress of key carbon-based host materials for Li-metal anodes, providing an outlook on the potential of carbon-based hosts in future research.

CARBON ENERGY (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing lithium metal anode by octaphenyl polyoxyethylene-lithium complexation

Hongliu Dai et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Multidisciplinary Sciences

Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode

Mintao Wan et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Dual-Additive Electrolyte Enables Practical Lithium-Metal Batteries

Siyuan Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Three-Dimensional Ordered Macro/Mesoporous Cu/Zn as a Lithiophilic Current Collector for Dendrite-Free Lithium Metal Anode

Duo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Coupling a Sponge Metal Fibers Skeleton with In Situ Surface Engineering to Achieve Advanced Electrodes for Flexible Lithium-Sulfur Batteries

Bo Liu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Redistributing Li-Ion Flux by Parallelly Aligned Holey Nanosheets for Dendrite-Free Li Metal Anodes

Yangen Zhou et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Interface chemistry of an amide electrolyte for highly reversible lithium metal batteries

Qidi Wang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Lithium and Stannum Hybrid Anodes for Flexible Wire-Type Lithium-Oxygen Batteries

Tong Liu et al.

SMALL STRUCTURES (2020)

Add to Collection

Article Multidisciplinary Sciences

Two-dimensional molecular brush-functionalized porous bilayer composite separators toward ultrastable high-current density lithium metal anodes

Chuanfa Li et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Adiponitrile (C6H8N2): A New Bi-Functional Additive for High-Performance Li-Metal Batteries

Seon Hwa Lee et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Protecting lithium/sodium metal anode with metal-organic framework based compact and robust shield

Ji Qian et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Entrapping lithium deposition in lithiophilic reservoir constructed by vertically aligned ZnO nanosheets for dendrite-free Li metal anodes

Fei Zhao et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Plasma-Strengthened Lithiophilicity of Copper Oxide Nanosheet-Decorated Cu Foil for Stable Lithium Metal Anode

Jingyi Luan et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Simultaneously Regulating Lithium Ion Flux and Surface Activity for Dendrite-Free Lithium Metal Anodes

Xianshu Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium-Magnesium Alloy as a Stable Anode for Lithium-Sulfur Battery

Ling-Long Kong et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Artificial Interphases for Highly Stable Lithium Metal Anode

Rui Xu et al.

MATTER (2019)

Add to Collection

Article Chemistry, Physical

3D TiC/C Core/Shell Nanowire Skeleton for Dendrite-Free and Long-Life Lithium Metal Anode

Sufu Liu et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Effect of Graphene Oxide for Impeding the Dendritic Plating of Li

Tara Foroozan et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Nanocrystalline silicon embedded in an alloy matrix as an anode material for high energy density lithium-ion batteries

Sang-Hyung Kim et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Stable Lithium Electrodeposition at Ultra-High Current Densities Enabled by 3D PMF/Li Composite Anode

Lei Fan et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Hierarchical Silver-Nanowire-Graphene Host Enabling Ultrahigh Rates and Superior Long-Term Cycling of Lithium-Metal Composite Anodes

Pan Xue et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Ionic liquid-immobilized polymer gel electrolyte with self-healing capability, high ionic conductivity and heat resistance for dendrite-free lithium metal batteries

Tao Chen et al.

NANO ENERGY (2018)

Add to Collection

Article Multidisciplinary Sciences

An ion redistributor for dendrite-free lithium metal anodes

Chen-Zi Zhao et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Chemistry, Physical

Interactions between Lithium Growths and Nanoporous Ceramic Separators

Peng Bai et al.

JOULE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Poly(dimethylsiloxane) Thin Film as a Stable Interfacial Layer for High-Performance Lithium-Metal Battery Anodes

Bin Zhu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes

Hao Liu et al.

NANO LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels

Shu-Hua Wang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode

Chunpeng Yang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Transition of lithium growth mechanisms in liquid electrolytes

Peng Bai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement

Wei Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Energy & Fuels

Design principles for electrolytes and interfaces for stable lithium-metal batteries

Mukul D. Tikekar et al.

NATURE ENERGY (2016)

Add to Collection

Review Nanoscience & Nanotechnology

Promise and reality of post-lithium-ion batteries with high energy densities

Jang Wook Choi et al.

NATURE REVIEWS MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Li-ion battery materials: present and future

Naoki Nitta et al.

MATERIALS TODAY (2015)

Add to Collection

Article Polymer Science

In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites

Saswata Bose et al.

POLYMER (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Lithium batteries and cathode materials

MS Whittingham

CHEMICAL REVIEWS (2004)

Add to Collection

Review Multidisciplinary Sciences

Issues and challenges facing rechargeable lithium batteries

JM Tarascon et al.

NATURE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.