Related references
Note: Only part of the references are listed.
Article
Engineering, Electrical & Electronic
Daniel Neuner et al.
Summary: Electric cars offer significant potential for reducing greenhouse gas emissions in transportation. High-power chargers that can quickly charge electric vehicles and extend their driving range are essential. This paper introduces a novel analytical model for the LLC converter operating below resonance, providing an accurate yet simplified approach for designing and analyzing the converter in a wide range of operating conditions.
ELEKTROTECHNIK UND INFORMATIONSTECHNIK
(2023)
Article
Engineering, Electrical & Electronic
Franz Vollmaier et al.
Summary: Typical DC-bus stabilization for low-voltage power circuits relies on ceramic capacitors for their high capacity density and low ESR, which reduce conduction losses. However, in hard-switching and hard-commutation operation, the low ESR and high ESL of the capacitors restrict the damping of switch node voltage overshoot and introduce high-frequency ringing, impacting transistor voltage margin. This paper analyzes the impact of DC-bus impedance and proposes a DC-bus snubber based on an RC network to minimize overshoot voltage, supported by comprehensive simulations using measurement-derived component models and in-situ measurements on a test PCB. Transient measurements using a double pulse test setup further confirm the effectiveness of the proposed approach.
ELEKTROTECHNIK UND INFORMATIONSTECHNIK
(2023)
Review
Energy & Fuels
Olcay Bay et al.
Summary: The rapid growth of electric vehicle use and the demand for faster charging require the development of power electronic converters for high-power, compact, and reliable EV charging solutions. This article comprehensively reviews the use of gallium nitride (GaN) semiconductor-based bidirectional on-board chargers (OBCs) in both 400V and 800V EV applications. Evaluations of GaN-based OBC topologies regarding power conversion losses, power density, implementation considerations, power quality, electromagnetic interference, and reliability are presented. The study also includes information on commercially available GaN power modules, advancements in GaN technology, applicable industry standards, and application requirements for OBCs. Potential areas of research related to the reviewed topologies are highlighted to improve the performance and user experience of electric vehicles, ultimately supporting their widespread adoption.
Article
Computer Science, Information Systems
Thomas Langbauer et al.
Summary: A three-phase ac-dc converter with high-frequency isolation can be implemented as a phase modular system using three single-phase PFC rectifier modules. The module reconfiguration allows for a wide input voltage range, and the recent literature suggests reducing the power pulsation with third-harmonic injection modulation. This paper experimentally verifies and extends the reduction in dc-link energy storage requirement achieved with harmonic injection modulation.
Article
Engineering, Electrical & Electronic
Hyungjin Kim et al.
Summary: This article proposes a modular single-stage electrolytic capacitor-less electric vehicle charger that is compatible with both single-phase and three-phase grid. The charger can achieve zero voltage switching under wide voltage ranges by controlling the phase shift angle. It also introduces a balancing control method to ensure pure DC battery charging under unbalanced grid conditions.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2022)
Article
Engineering, Electrical & Electronic
Yuliang Cao et al.
Summary: This article introduces an overall design procedure for a bidirectional soft-switching resonant-type PP converter. A decoupled design method is proposed for the parameters design to simplify the DCXs design. In the hardware design part, a two-direction flux cancellation method and an intraleaving winding structure are proposed to improve the efficiency and power density.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2022)
Proceedings Paper
Automation & Control Systems
Alexander Connaughton et al.
Summary: Two fast algorithms are presented in this paper that enable inductor volume and loss estimation based on inductance value and current waveform. These algorithms provide an easily accessible way to include magnetic components in multi-objective circuit simulation topology optimization for power density without relying on large component/material databases or artificial intelligence approaches.
2021 IEEE DESIGN METHODOLOGIES CONFERENCE (DMC)
(2021)
Proceedings Paper
Engineering, Electrical & Electronic
Thomas Langbauer et al.
Summary: The three port series resonant converter is a promising topology for grid applications and onboard chargers, providing high efficiency, galvanic isolation, and power dense design. This paper proposes a control loop for approximating optimal control variables and presents a mathematical model for calculating power flow and finding the best switching frequency. The control approach is demonstrated with a Silicon Carbide based prototype for an on-board charger application.
2021 IEEE 22ND WORKSHOP ON CONTROL AND MODELLING OF POWER ELECTRONICS (COMPEL)
(2021)
Proceedings Paper
Energy & Fuels
Liyan Zhu et al.
Summary: This paper proposes a three-port current-fed triple-active bridge (CFTAB) converter to integrate OBC with APM electrically and magnetically, featuring a simple structure and the ability to charge HV battery and LV battery simultaneously. An integrated prototype is also developed to prove the advantages of the proposed integrated charger.
2021 THIRTY-SIXTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC 2021)
(2021)
Review
Computer Science, Information Systems
Jiaqi Yuan et al.
Summary: This paper provides a comprehensive overview and investigation on the state-of-the-art solutions of bidirectional OBCs, including current status, topologies, major components, and promising topologies. It also discusses future trends and challenges for topologies, technologies, management, system integration, and wireless charging systems.
Proceedings Paper
Automation & Control Systems
Thomas Langbauer et al.
2020 IEEE 21ST WORKSHOP ON CONTROL AND MODELING FOR POWER ELECTRONICS (COMPEL)
(2020)
Article
Engineering, Electrical & Electronic
Alireza Khaligh et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY
(2019)
Article
Engineering, Electrical & Electronic
Felix Jauch et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2016)
Article
Engineering, Electrical & Electronic
Junjun Deng et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY
(2014)
Article
Engineering, Electrical & Electronic
Hariharan Krishnaswami et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2009)
Article
Engineering, Electrical & Electronic
Haimin Tao et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2008)
