Related references
Note: Only part of the references are listed.Fast and effective removal of Pb(II), Cu(II) and Ni(II) ions from aqueous solutions with TiO2 nanofibers: Synthesis, adsorption-desorption process and kinetic studies
Hacer Sibel Karapinar et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY (2023)
Ni-doping-induced oxygen vacancy in Pt-CeO2 catalyst for toluene oxidation: Enhanced catalytic activity, water-resistance, and SO2-tolerance
Menglan Xiao et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2023)
Interfacial engineering of Ni(OH)2 on W2C for remarkable alkaline hydrogen production
Hong Chuan Fu et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2022)
Biologically bound nickel as a sustainable catalyst for the selective hydrogenation of cinnamaldehyde
Parul Johar et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2022)
Self-activated Ni(OH)2 cathode for complete electrochemical reduction of trichloroethylene to ethane in low-conductivity groundwater
Jia Deng et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2022)
A Review on Hydrometallurgical Processes for the Recovery of Valuable Metals from Spent Catalysts and Life Cycle Analysis Perspective
Minh Nhan Le et al.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2021)
Novel approach of in-situ nickel capture technology to recycle silver and palladium from waste nickel-rich multilayer ceramic capacitors
Ya Liu et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Zero-valent palladium dissolution using NaCl/CuCl2 solutions
Marica Muscetta et al.
JOURNAL OF HAZARDOUS MATERIALS (2021)
A review of recycling spent lithium-ion battery cathode materials using hydrometallurgical treatments
Joey Chung-Yen Jung et al.
JOURNAL OF ENERGY STORAGE (2021)
Recovery of palladium (II) from aqueous solution through photocatalytic deposition in presence of ZnO under UV/Visible-light radiation
Marica Muscetta et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)
Intensification and optimisation of nickel recovery from spent hydrogenation catalysts via ultrasound-augmented hydrometallurgy
Mitchell S. W. Lim et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)
Efficient acetaldehyde production and recovery upon selective Cu/TiO2-photocatalytic oxidation of ethanol in aqueous solution
Laura Clarizia et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Development of an environmentally friendly flowsheet for the hydrometallurgical recovery of nickel and aluminum from spent methanation catalyst
Farhad Moosakazemi et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Sustainable recovery of nickel, molybdenum, and vanadium from spent hydroprocessing catalysts by an integrated selective route
Di Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Hydrogen production upon UV-light irradiation of Cu/TiO2 photocatalyst in the presence of alkanol-amines
Marica Muscetta et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Electrical Characteristics of Multilayered Ceramic Capacitors Depending on BaTiO3Particle Size
Jung-Rag Yoon et al.
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY (2020)
Recovery of metals from jarosite of hydrometallurgical nickel production by thermal treatment and leaching
Wang Linsong et al.
HYDROMETALLURGY (2020)
Recovery of precious metals from spent Mo-Co-Ni/Al2O3 catalyst in organic acid medium: Process optimization and kinetic studies
Hasan Arslanoglu et al.
PETROLEUM SCIENCE AND TECHNOLOGY (2019)
Photodeposition time dependant growth, size and photoactivity of Ag and Cu deposited TiO2 nanocatalyst under solar irradiation
Sakshi Bhardwaj et al.
SOLAR ENERGY (2019)
Perspectives and challenges in multilayer ceramic capacitors for next generation electronics
Kootak Hong et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Leaching behavior of lanthanum, nickel and iron from spent catalyst using inorganic acids
W. Astuti et al.
MINERAL PROCESSING AND TECHNOLOGY INTERNATIONAL CONFERENCE 2017 (2018)
Photo-reduced Cu/CuO nanoclusters on TiO2 nanotube arrays as highly efficient and reusable catalyst
Zhao Jin et al.
SCIENTIFIC REPORTS (2017)
Kinetics and statistical analysis of nickel leaching from spent catalyst in nitric acid solution
Juan Ramos-Cano et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2016)
A hydrometallurgical process for recovering total metal values from waste monolithic ceramic capacitors
G. Prabaharan et al.
WASTE MANAGEMENT (2016)
Cupric chloride leaching (HCl-CuCl2-NaCl) of metals from waste printed circuit boards (WPCBs)
E. Y. Yazici et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2015)
A kinetic study on hydrochloric acid leaching of nickel from Ni-Al2O3 spent catalyst
P. K. Parhi et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2013)
A new approach for identifying the rate controlling step applied to the leaching of nickel from spent catalyst
M. K. Nazemi et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2011)
Kinetics of Oxygen Diffusion into Multilayer Ceramic Capacitors During the Re-oxidation Process and its Implications on Dielectric Properties
Kazumi Kaneda et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
Microstructural design of dielectrics for Ni-MLCC with ultra-thin active layers
Youichi Mizuno et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2007)
Leaching behavior of nickel from waste multi-layer ceramic capacitors
Eun-young Kim et al.
HYDROMETALLURGY (2007)
Salicylic acid nitration by means of nitric acid/acetic acid system: Chemical and kinetic characterization
Roberto Andreozzi et al.
ORGANIC PROCESS RESEARCH & DEVELOPMENT (2006)
Dismantling, recovery, and reuse of spent nickel-metal hydride batteries
JM Nan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Nickel recovery from spent nickel catalyst
KK Sahu et al.
WASTE MANAGEMENT & RESEARCH (2005)
Stress and electrical field responses of X5R type multilayer ceramic capacitor with Ni internal electrode
K Saito et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS (2003)
Chloride metallurgy: PGM recovery and titanium dioxide production
GVK Puvvada et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2003)
Base-metal electrode-multilayer ceramic capacitors: Past, present and future perspectives
H Kishi et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS (2003)
Effect of milling process on core-shell microstructure and electrical properties for BaTiO3-based Ni-MLCC
Y Mizuno et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)