☆ 4.7 Article

Enhancing mechanical properties of Al matrix composites via porous reduced graphene oxide strengthened interface

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Molecular dynamics simulation of reinforcement mechanism of graphene/aluminum composites and microstructure evolution

Jinjie Zhou et al.

Summary: The contribution of graphene interfaces to the mechanical properties of graphene/aluminum composites with different chirality and distribution patterns was investigated using molecular dynamics methods. The composites exhibited an increase of approximately 10% in Young's modulus and 5% in tensile yield strength compared to pure aluminum. The fracture strain and yield stress of the composites were influenced by the chiral structures of graphene. Folding deformation of graphene promoted the yielding of the composites under compressive loading. The uniform distribution of graphene was found to enhance the mechanical properties of the composites.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Chemistry, Physical

Superior tensile properties of graphene/Al composites assisted by in-situ alumina nanoparticles

Jie Wan et al.

Summary: To solve the issue of ductility collapse in high-strength aluminum matrix composites reinforced with graphene nanosheets (GNSs), a large amount of in-situ alumina nanoparticles (-3 vol%) were introduced into the GNSs/Al composite. Microstructural characterization showed that the introduced alumina nanoparticles were alpha-Al2O3 with a diameter of about 30 nm, uniformly distributed on the Al matrix. Tensile tests revealed that the composite exhibited high tensile strength (464 MPa) and appreciable ductility (8.9%), surpassing results reported in literature. Fractographic analysis indicated that the in-situ alumina nanoparticles acted as nucleation sites for dimples, enabling strain-delocalization and enhancing the plastic deformability. Analysis on strengthening mechanisms confirmed the synergistic reinforcing effect of ex-situ GNSs and in-situ alumina nanoparticles. These findings provide guidance for improving the mechanical properties of GNSs/Al composites.

CARBON (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Analysis of microstructure and mechanical properties of graphene nanoplatelet reinforced 2024Al alloy

Zhaowei Huang et al.

Summary: Graphene nanoplatelets (GNPs) reinforced 2024Al alloy composites were fabricated by ultrasonic vibration dispersion. The mechanical properties of the composites were significantly improved when the GNPs content was 0.8 wt%, mainly due to the good interface bonding and GNPs dispersion.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Chemistry, Physical

Interfacial modification and performance enhancement of carbon matrix/aluminum composites

Wenfu Wei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of laser additive manufacturing on the microstructure and mechanical properties of TiB2 reinforced Al-Cu matrix composite

Q. Z. Wang et al.

Summary: Understanding the effect of reinforcements on microstructure evolution and strengthening mechanism is crucial for developing good performance aluminum matrix composites (AMCs) prepared by laser additive manufacturing (LAM). In this study, the roles of submicron-TiB2 particles in the grain morphology evolution, mechanical properties, and corresponding strengthening mechanism of the 2024Al matrix processed by laser directed energy deposition (L-DED) and laser powder bed fusion (L-PBF) were compared. The results show that the L-DED processed TiB2p/2024Al composite has equiaxed grains, while the L-PBF processed composite only shows refinement in columnar grains. Both L-DED and L-PBF fabricated 3 wt% TiB2p/2024Al composites exhibit enhanced strength and plasticity due to grain refinement. Grain boundary strengthening, dislocation strengthening, and load transfer strengthening contribute to the increased yield strength in L-DEDed TiB2p/2024Al sample.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced corrosion protection of magnesium alloy via in situ Mg-Al LDH coating modified by core-shell structured Zn-Al LDH@ZIF-8

Pu-Bo Li et al.

Summary: The in-situ synthesis of Mg-Al layered double hydroxide (LDH) conversion coatings and the addition of various modifiers resulted in the successful construction of a hydrophobic film with excellent corrosion resistance.

RARE METALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Enhancing the Strengthening Effect of Graphene-Nanoplates in Al Matrix Composites by Heterogeneous Matrix Design

Puzhen Shao et al.

Summary: The present work investigates the properties of graphene-nanoplates/aluminum composites with a heterogeneous matrix design, and demonstrates that this design improves the mechanical properties, plasticity, and strengthening effect of the material.

NANOMATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical behaviors of Ti3AlC2 triggered in-situ Al3Ti and TiC reinforced 2024Al composite

Yuanbo Wang et al.

Summary: An in-situ Al3Ti and TiC reinforced 2024Al matrix composite was fabricated using hot-press sintering of Ti3AlC2 and 2024Al powders. The addition of Ti3AlC2 precursor in different volume fractions was found to affect the microstructure and mechanical properties of Al3Ti-TiC/ 2024Al composites. The in-situ formed Al3Ti and submicron TiC were homogeneously distributed in the 2024Al matrix. The tensile and compressive properties of the composites showed temperature dependence and the 20 vol.% Ti3AlC2/2024Al composite exhibited improved strength and elongation compared to pure 2024Al. The excellent performance of the Al3Ti-TiC/2024Al composites can be attributed to synergistic strengthening effects.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Physical

Architectured interfacial interlocking structure for enhancing mechanical properties of Al matrix composites reinforced with graphene nanosheets

Lizhuang Yang et al.

Summary: A new strategy of constructing interfacial interlocking structure in metal matrix composites was proposed to enhance mechanical performance. Experiments and calculations demonstrated that the robust covalent bonding between Ni NPs and GNS helps in delaying crack propagation, leading to excellent strengthening efficiency and good ductility in the obtained composites.

CARBON (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Strengthening of Graphene/Aluminum Composites through Point Defects: A First-Principles Study

Xin Zhang et al.

Summary: This study systematically investigated the effects of point defects on the mechanical properties of graphene/aluminum composites, showing that the defects significantly enhance the interfacial bonding strength, especially the single vacancy defect. The formation of strong Al-C covalent bonds at the defects is found to be the fundamental reason for improving the mechanical properties.

NANOMATERIALS (2021)

Add to Collection

Review Physics, Applied

Mechanical properties of graphene

Y. W. Sun et al.

Summary: This paper reviews the mechanical properties of graphene, covering aspects such as thickness, elastic constants, and environmental effects. It discusses how properties unavailable from graphite can be determined through studies of carbon nanotubes.

APPLIED PHYSICS REVIEWS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Deformation treatment and microstructure of graphene-reinforced metal matrix nanocomposites: A review of graphene post-dispersion

Yong Mei et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)

Add to Collection

Review Engineering, Manufacturing

A review on fabrication methods, reinforcements and mechanical properties of aluminum matrix composites

Vineet Chak et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution

Z. Y. Xu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Chemistry, Physical

Creating defects on graphene basal-plane toward interface optimization of graphene/CuCr composites

Ke Chu et al.

CARBON (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Fabrication of aluminum matrix composites reinforced with Ni-coated graphene nanosheets

R. Guan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Strengthening 2024Al alloy by novel core-shell structured Ti/B4C composite particles

Guodong Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Advance research progresses in aluminium matrix composites: manufacturing & applications

Pulkit Garg et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Chemistry, Physical

High efficiency dispersal and strengthening of graphene reinforced aluminum alloy composites fabricated by powder metallurgy combined with friction stir processing

Z. W. Zhang et al.

CARBON (2018)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical properties of graphene oxide reinforced aluminium matrix composites

Bhagya Lakshmi Dasari et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Holey Reduced Graphene Oxide Coupled with an Mo2N-Mo2C Heterojunction for Efficient Hydrogen Evolution

Haijing Yan et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Graphene oxide-reinforced aluminum alloy matrix composite materials fabricated by powder metallurgy

Hansang Kwon et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Interfacial characteristics and fracture behavior of spark-plasma -sintered TiNi fiber-reinforced 2024Al matrix composites

Peng Dong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanical properties of graphene and graphene-based nanocomposites

Dimitrios G. Papageorgiou et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and properties of Al3Zr/2024Al in situ composites after forging

Lei Jiao et al.

RARE METALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Investigating aluminum alloy reinforced by graphene nanoflakes

S. J. Yan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Chemistry, Physical

In situ (Al3Zr + Al2O3np)/2024Al metal matrix composite with novel reinforcement distributions fabricated by reaction hot pressing

B. Kaveendran et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

Add to Collection

Article Chemistry, Physical

Synthesis and optical properties of ZnO/MgO nanocomposite

Santa Chawla et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Experimental and simulation investigations of tensile response of (Al2O3f/Al)w/2024Al composite

Wenlong Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Studies on squeeze casting of Al 2124 alloy and 2124-10% SiCp metal matrix composite

K. Sukumaran et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.