Related references
Note: Only part of the references are listed.Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Kevin G. Gallagher et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
MoS2 Nanosheets Vertically Aligned on Carbon Paper: A Freestanding Electrode for Highly Reversible Sodium-Ion Batteries
Xiuqiang Xie et al.
ADVANCED ENERGY MATERIALS (2016)
Electrical, Mechanical, and Capacity Percolation Leads to High-Performance MoS2/Nanotube Composite Lithium Ion Battery Electrodes
Yuping Liu et al.
ACS NANO (2016)
A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes
Thomas M. Higgins et al.
ACS NANO (2016)
Se4+ Ion Decorated Highly Conductive Ti3C2 MXene: Promising Lithium-Ion Anodes with Enhanced Volumetric Capacity and Cyclic Performance
Jianmin Luo et al.
ACS NANO (2016)
Solution-Processed Two-Dimensional Metal Dichalcogenide-Based Nanomaterials for Energy Storage and Conversion
Xiehong Cao et al.
ADVANCED MATERIALS (2016)
Iron-based sodium-ion full batteries
Hualin Ye et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Hierarchical nanotubes assembled from MoS2-carbon monolayer sandwiched superstructure nanosheets for high-performance sodium ion batteries
Zheng-Tian Shi et al.
NANO ENERGY (2016)
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Dipan Kundu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Water-Soluble MoS3 Nanoparticles for Photocatalytic H2 Evolution
Wei Zhang et al.
CHEMSUSCHEM (2015)
High mass loading, binder-free MXene anodes for high areal capacity Li-ion batteries
Seon Joon Kim et al.
ELECTROCHIMICA ACTA (2015)
A high tap density secondary silicon particle anode fabricated by scalable mechanical pressing for lithium-ion batteries
Dingchang Lin et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Two-Dimensional Transition Metal Dichalcogenide Mono layers as Promising Sodium Ion Battery Anodes
Eunjeong Yang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
Prospects for reducing the processing cost of lithium ion batteries
David L. Wood et al.
JOURNAL OF POWER SOURCES (2015)
Thick Electrodes for High Energy Lithium Ion Batteries
Madhav Singh et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Nanoflake-Assembled Hierarchical Na3V2(PO4)3/C Microflowers: Superior Li Storage Performance and Insertion/Extraction Mechanism
Qinyou An et al.
ADVANCED ENERGY MATERIALS (2015)
Ni3+-Induced Formation of Active NiOOH on the Spinel Ni-Co Oxide Surface for Efficient Oxygen Evolution Reaction
Hsin-Yi Wang et al.
ADVANCED ENERGY MATERIALS (2015)
Electrochemical properties of all-solid-state lithium batteries with amorphous MoS3 electrodes prepared by mechanical milling
Takuya Matsuyama et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Nanostructured CuP2/C composites as highperformance anode materials for sodium ion batteries
Feipeng Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Evidence from in Situ X-ray Absorption Spectroscopy for the Involvement of Terminal Disulfide in the Reduction of Protons by an Amorphous Molybdenum Sulfide Electrocatalyst
Benedikt Lassalle-Kaiser et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
An Advanced MoS2/Carbon Anode for High-Performance Sodium-Ion Batteries
Jingjing Wang et al.
SMALL (2015)
Engineering the Composition and Crystallinity of Molybdenum Sulfide for High-Performance Electrocatalytic Hydrogen Evolution
Yanpeng Li et al.
ACS CATALYSIS (2015)
Ultrathin MoS2 Nanosheets as Anode Materials for Sodium-Ion Batteries with Superior Performance
Dawei Su et al.
ADVANCED ENERGY MATERIALS (2015)
Effective Liquid-Phase Exfoliation and Sodium Ion Battery Application of MoS2 Nanosheets
Gyeong Sook Bang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
MoS2/Graphene Composite Paper for Sodium-Ion Battery Electrodes
Lamuel David et al.
ACS NANO (2014)
Layered SnS2-Reduced Graphene Oxide Composite - A High-Capacity, High-Rate, and Long-Cycle Life Sodium-Ion Battery Anode Material
Baihua Qu et al.
ADVANCED MATERIALS (2014)
Carbon Nanofibers Decorated with Molybdenum Disulfide Nanosheets: Synergistic Lithium Storage and Enhanced Electrochemical Performance
Fei Zhou et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
Single-Layered Ultrasmall Nanoplates of MoS2 Embedded in Carbon Nanofibers with Excellent Electrochemical Performance for Lithium and Sodium Storage
Changbao Zhu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
Reversible sodium storage via conversion reaction of a MoS2-C composite
Yun-Xiao Wang et al.
CHEMICAL COMMUNICATIONS (2014)
Research Development on Sodium-Ion Batteries
Naoaki Yabuuchi et al.
CHEMICAL REVIEWS (2014)
Lithium ion battery applications of molybdenum disulfide (MoS2) nanocomposites
Tyler Stephenson et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Ab initio characterization of layered MoS2 as anode for sodium-ion batteries
Majid Mortazavi et al.
JOURNAL OF POWER SOURCES (2014)
Mesoporous Amorphous FePO4 Nanospheres as High-Performance Cathode Material for Sodium-Ion Batteries
Yongjin Fang et al.
NANO LETTERS (2014)
Synergistic Na-Storage Reactions in Sn4P3 as a High-Capacity, Cycle-stable Anode of Na-Ion Batteries
Jiangfeng Qian et al.
NANO LETTERS (2014)
Carbon-Coated Na3V2(PO4)3 Embedded in Porous Carbon Matrix: An Ultrafast Na-Storage Cathode with the Potential of Outperforming Li Cathodes
Changbao Zhu et al.
NANO LETTERS (2014)
Capacitive Energy Storage in Nanostructured Carbon-Electrolyte Systems
P. Simon et al.
ACCOUNTS OF CHEMICAL RESEARCH (2013)
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Huilin Pan et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Conversion reactions for sodium-ion batteries
Franziska Klein et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Growth and Activation of an Amorphous Molybdenum Sulfide Hydrogen Evolving Catalyst
Heron Vrubel et al.
ACS CATALYSIS (2013)
Superior Electrochemical Performance and Storage Mechanism of Na3V2(PO4)3 Cathode for Room-Temperature Sodium-Ion Batteries
Zelang Jian et al.
ADVANCED ENERGY MATERIALS (2013)
The First Report on Excellent Cycling Stability and Superior Rate Capability of Na3V2(PO4)3 for Sodium Ion Batteries
Kuppan Saravanan et al.
ADVANCED ENERGY MATERIALS (2013)
Self-assembly of hierarchical MoSx/CNT nanocomposites (2<x<3): towards high performance anode materials for lithium ion batteries
Yumeng Shi et al.
SCIENTIFIC REPORTS (2013)
Enhanced photoelectrochemical hydrogen production using silicon nanowires@MoS3
Zhipeng Huang et al.
NANO ENERGY (2013)
From Bulk to Monolayer MoS2: Evolution of Raman Scattering
Hong Li et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Hydrogen evolution catalyzed by MoS3 and MoS2 particles
Heron Vrubel et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Veronica Palomares et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Electrode Materials for Rechargeable Sodium-Ion Batteries: Potential Alternatives to Current Lithium-Ion Batteries
Sung-Wook Kim et al.
ADVANCED ENERGY MATERIALS (2012)
True Performance Metrics in Electrochemical Energy Storage
Y. Gogotsi et al.
SCIENCE (2011)
Amorphous molybdenum sulfide films as catalysts for electrochemical hydrogen production in water
Daniel Merki et al.
CHEMICAL SCIENCE (2011)
Model oxide supported MoS2 HDS catalysts: structure and surface properties
Federico Cesano et al.
CATALYSIS SCIENCE & TECHNOLOGY (2011)
ATHENA, ARTEMIS, HEPHAESTUS:: data analysis for X-ray absorption spectroscopy using IFEFFIT
B Ravel et al.
JOURNAL OF SYNCHROTRON RADIATION (2005)
Modeling the structure of amorphous MoS3:: A neutron diffraction and reverse Monte Carlo study
SJ Hibble et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2004)
Share Paper
