4.5 Article

Optimisation of Reactive Black 5 dye removal by electrocoagulation process using response surface methodology

Journal

WATER SCIENCE AND TECHNOLOGY
Volume 75, Issue 4, Pages 952-962

Publisher

IWA PUBLISHING
DOI: 10.2166/wst.2016.563

Keywords

electrocoagulation; iron complexes; optimisation; Reactive Black 5; response surface methodology

Funding

  1. High Impact Research Grant [UM.C/HIR/MOHE/ENG/43]

Ask authors/readers for more resources

In this work, a regression model obtained from response surface methodology (RSM) was proposed for the electrocoagulation (EC) treatment of textile wastewater. The Reactive Black 5 dye (RB5) was used as a model dye to evaluate the performance of the model design. The effect of initial solution pH, applied current and treatment time on RB5 removal was investigated. The total number of experiments designed by RSM amounted to 27 runs, including three repeated experimental runs at the central point. The accuracy of the model was evaluated by the F-test, coefficient of determination (R-2), adjusted R-2 and standard deviation. The optimum conditions for RB5 removal were as follows: initial pH of 6.63, current of 0.075 A, electrolyte dose of 0.11 g/L and EC time of 50.3 min. The predicted RB5 removal was 83.3% and the percentage error between experimental and predicted results was only 3-5%. The obtained data confirm that the proposed model can be used for accurate prediction of RB5 removal. The value of the zeta potential increased with treatment time, and the X-ray diffraction pattern shows that iron complexes were found in the sludge.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.5
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available