Large-scale demonstration of the sulfate reduction autotrophic denitrification nitrification integrated (SANI®) process in saline sewage treatment

Recently, the Sulfate reduction Autotrophic denitrification Nitrification Integrated (SANI((R))) process was developed for the removal of organics and nitrogen with sludge minimization in the treatment of saline sewage (with a Sulfate-to-COD ratio > 0.5 mg SO42--S/mg COD) generated from seawater used for toilet flushing or salt water intrusion. Previously investigated in lab- and pilot-scale, this process has now been scaled up to a 800-1000 m(3)/d full-scale demonstration plant. In this paper, the design and operating parameters of the SANI demo plant built in Hong Kong are analyzed. After a 4-month start-up period, a stable sulfur cycle-based biological nitrogen removal system having a hydraulic retention time (HRT) of 12.5 h was developed, thereby reducing the amount of space needed by 30-40% compared with conventional activated sludge (CAS) plants in Hong Kong. The demo plant satisfactorily met the local effluent discharge limits during both the summer and winter periods. In winter (sewage temperature of 21 +/- 1 degrees C), the maximum volumetric loading rates for organic conversion, nitrification, and denitrification were 2 kg COD/(m(3)-d), 0.39 kg N/(m(3).d), and 0.35 kg N/(m(3).d), respectively. The biological sludge production rate of SANI process was 0.35 +/- 0.08 g TSSproduced/g BOD5 (or 0.19 +/- 0.05 g TSS/g COD), which is 60-70% lower than that of the CAS process in Hong Kong. While further process optimization is possible, this study demonstrates the SANI process can be potentially implemented for the treatment of saline sewage. (c) 2016 Elsevier Ltd. All rights reserved.