The impacts of roadside vegetation barriers on the dispersion of gaseous traffic pollution in urban street canyons

Vegetation barriers have been widely applied along urban streets to improve roadside air quality. For a deep investigation of their influences, field measurements and numerical simulations are performed in this study. Carbon monoxide (CO) is selected as a representative of gaseous traffic emissions for both field observations and numerical models. Computational Fluid Dynamics (CFD) models of the standard k-epsilon turbulent model and Eulerian approach for species transport are solved by FLUENT solver. Results obtained from numerical simulations show a good agreement with field observations on the distribution of roadside CO. In perpendicular wind conditions, both field observations and numerical simulations present a prominent CO reduction over the slow lanes (footpath and bikeway) when vegetation barriers exist. To effectively mitigate roadside air pollution, numerical simulations also provide the optimal heights for roadside vegetation barriers in the given street canyons. For street canyons with an aspect ratio (the ratio of building height to street width) ranging from 0.3 to 1.67, 1.1 m can be used as an optimal height, and 2.0 m could serve as an alternative if tall vegetation barriers are considered. For street canyons with an aspect ratio of lower than 0.3, 0.9 m to 2.5 m can be considered as the optimal heights for roadside vegetation barriers. According to sensitivity analysis, the optimal heights for vegetation barriers are largely insensitive to wind velocities in the given street canyons. In the more complicated urban street canyons and complex meteorological conditions, the optimal heights can be determined by specific numerical simulations. These findings are expected to provide important insights into alleviation of gaseous mobile emissions in terms of vegetation barrier design in urban streets. (C) 2016 Elsevier GmbH. All rights reserved.