Journal
SMART MATERIALS AND STRUCTURES
Volume 25, Issue 7, Pages -Publisher
IOP PUBLISHING LTD
DOI: 10.1088/0964-1726/25/7/075034
Keywords
structural health monitoring; reinforced concrete beams; acoustic emission; signal strength; bond failure; bar slip
Ask authors/readers for more resources
In this study, acoustic emission (AE) monitoring was utilised to identify the onset of bond failure in reinforced concrete beams. Beam anchorage specimens were designed and tested to fail in bond in the anchorage zone. The specimens included four 250. x. 250. x. 1500 mm beams with four variable bonded lengths (100, 200, 300, and 400 mm). Meanwhile, an additional 250. x. 250. x. 2440 mm beam, with 200 mm bonded length, was tested to investigate the influence of sensor location on the identification of bond damage. All beams were tested under four-point loading setup and continuously monitored using three distributed AE sensors. These attached sensors were exploited to record AE signals resulting from both cracking and bond deterioration until failure. The variations in the number of AE hits and cumulative signal strength (CSS) versus test time were evaluated to achieve early detection of crack growth and bar slippage. In addition, AE intensity analysis was performed on signal strength of collected AE signals to develop two additional parameters: historic index (H (t)) and severity (S-r). The analysis of these AE parameters enabled an early detection of both first cracks (at almost the mid-span of the beam) and bar slip in either of the anchorage zones at the beams' end before their visual observation, regardless of sensor location. The results also demonstrated a clear correlation between the damage level in terms of crack development/ measured free end bar slip and AE parameters (number of hits, CSS, H(t), and S-r).
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available