Related references
Note: Only part of the references are listed.A comparative analysis of the environmental impacts of machine tool manufacturing facilities
Nancy Diaz-Elsayed et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Prediction of energy consumption and environmental implications for turning operation using finite element analysis
Salman Pervaiz et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Prediction and optimization of machining parameters for minimizing power consumption and surface roughness in machining
Girish Kant et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Optimization of process parameters using a Response Surface Method for minimizing power consumption in the milling of carbon steel
Gianni Campatelli et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Critical factors in energy demand modelling for CNC milling and impact of toolpath strategy
Ampara Aramcharoen et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Empirical power-consumption model for material removal in three-axis milling
Hae-Sung Yoon et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Integrating the Taguchi Method and Response Surface Methodology for Process Parameter Optimization of the Injection Molding
Yung-Tsan Jou et al.
APPLIED MATHEMATICS & INFORMATION SCIENCES (2014)
A reduced model for energy consumption analysis in milling
Stefano Borgia et al.
VARIETY MANAGEMENT IN MANUFACTURING: PROCEEDINGS OF THE 47TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS (2014)
Control of machining parameters for energy and cost savings in micro-scale drilling of PCBs
Hae-Sung Yoon et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Modelling of direct energy requirements in mechanical machining processes
Vincent Aizebeoje Balogun et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites
Rajesh Kumar Bhushan
JOURNAL OF CLEANER PRODUCTION (2013)
Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA
Carmita Camposeco-Negrete
JOURNAL OF CLEANER PRODUCTION (2013)
Multi-objective optimization of milling parameters - the trade-offs between energy, production rate and cutting quality
Jihong Yan et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Classification of energy consumption patterns for energy audit and machine scheduling in industrial manufacturing systems
Cao Vinh Le et al.
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL (2013)
Energy efficient manufacturing from machine tools to manufacturing systems
Konstantinos Salonitis et al.
FORTY SIXTH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2013 (2013)
Towards energy and resource efficient manufacturing: A processes and systems approach
Joost R. Duflou et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools
Issam Hanafi et al.
JOURNAL OF CLEANER PRODUCTION (2012)
An on-line approach for energy efficiency monitoring of machine tools
Shaohua Hu et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool
R. Suresh et al.
MEASUREMENT (2012)
Analysis and estimation of energy consumption for numerical control machining
Y. He et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Optimization of energy consumption and surface quality in finish turning
Yansong Guo et al.
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 (2012)
Calculation of optimum cutting parameters based on minimum energy footprint
P. T. Mativenga et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
A study on energy efficiency improvement for machine tools
M. Mori et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Unit process energy consumption models for material removal processes
S. Kara et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Taguchi-fuzzy multi output optimization (MOO) in high speed CNC turning of AISI P-20 tool steel
Anil Gupta et al.
EXPERT SYSTEMS WITH APPLICATIONS (2011)
A multi-criteria decision method for sustainability assessment of the use phase of machine tool systems
Oliver Avram et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Evaluating the use phase energy requirements of a machine tool system
Oliver Ioan Avram et al.
JOURNAL OF CLEANER PRODUCTION (2011)
Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3
Domnita Fratila et al.
JOURNAL OF CLEANER PRODUCTION (2011)
Software-based tool path evaluation for environmental sustainability
Daeyoung Kong et al.
JOURNAL OF MANUFACTURING SYSTEMS (2011)
Modelling Power Consumption in Ball-End Milling Operations
G. Quintana et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
Structure principles of energy efficient machine tools
R. Neugebauer et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2011)
A discrete-event simulation approach to predict power consumption in machining processes
Roland Larek et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2011)
Automated energy monitoring of machine tools
A. Vijayaraghavan et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Characteristics of Additional Load Losses of Spindle System of Machine Tools
Shaohua Hu et al.
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING (2010)
Sustainable machining: selection of optimum turning conditions based on minimum energy considerations
M. F. Rajemi et al.
JOURNAL OF CLEANER PRODUCTION (2010)
Impact of energy efficiency on computer numerically controlled machining
S. E. Anderberg et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2010)
A review on electrical motors energy use and energy savings
R. Saidur
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA
Anirban Bhattacharya et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2009)
A generic energy consumption model for decision making and energy efficiency optimisation in manufacturing
Anton Dietmair et al.
INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2009)
Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique - A comparative analysis
Aman Aggarwal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
A methodology for practical cutting force evaluation based on the energy spent in the cutting system
Viktor P. Astakhov et al.
MACHINING SCIENCE AND TECHNOLOGY (2008)
Architecture for machining process and production monitoring based in open computer numerical control
J. F. G. Oliveira et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Cutting tool wear estimation for turning
Vishal S. Sharma et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2008)
Cutting force-based real-time estimation of tool wear in face milling using a combination of signal processing techniques
P. Bhattacharyya et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)
Prediction of cutting force and temperature rise in the end-milling operation
P. Palanisamy et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
A review of optimization techniques in metal cutting processes
Indrajit Mukherjee et al.
COMPUTERS & INDUSTRIAL ENGINEERING (2006)
Genetic algorithm-based multi-objective optimization of cutting parameters in turning processes
RQ Sardiñas et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2006)
An intelligent system for monitoring and optimization of ball-end milling process
F Cus et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Empirical analysis of energy management in Danish industry
LB Christoffersen et al.
JOURNAL OF CLEANER PRODUCTION (2006)
Optimization of multi-pass milling using parallel genetic algorithm and parallel genetic simulated annealing
ZG Wang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Modeling of cutting forces under hard turning conditions considering tool wear effect
Y Huang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2005)
Environmentally benign manufacturing: Observations from Japan, Europe and the United States
T Gutowski et al.
JOURNAL OF CLEANER PRODUCTION (2005)
Estimation of tool wear in orthogonal cutting using the finite element analysis
YC Yen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
A cutting power model for tool wear monitoring in milling
H Shao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
An energy based analytical force model for orthogonal cutting of metal matrix composites
HA Kishawy et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Models of machine tool efficiency and specific consumed energy
F Draganescu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Optimization of cutting process by GA approach
F Cus et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2003)
Analytical predictions and experimental validation of cutting force ratio, chip thickness, and chip back-flow angle in restricted contact machining using the universal slip-line model
N Fang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Comparative analysis of conventional and nan-conventional optimisation techniques for CNC turning process
R Saravanan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2001)
Share Paper
