Related references
Note: Only part of the references are listed.Allyl Sulfides and α-Substituted Acrylates as Addition-Fragmentation Chain Transfer Agents for Methacrylate Polymer Networks
Samuel Clark Ligon et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2016)
Thiolated Hemicellulose As a Versatile Platform for One-Pot Click-Type Hydrogel Synthesis
Laleh Maleki et al.
BIOMACROMOLECULES (2015)
Fabrication of poly(ethylene glycol)-based cyclodextrin containing hydrogels via thiol-ene click reaction
Mehmet Arslan et al.
EUROPEAN POLYMER JOURNAL (2015)
Photobase Generators Derived from trans-o-Coumaric Acid for Anionic UV Curing Systems without Gas Generation
Koji Arimitsu et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2015)
Modification of linear prepolymers to tailor heterogeneous network formation through photo-initiated polymerization-induced phase separation
Caroline R. Szczepanski et al.
POLYMER (2015)
Incorporation of core-shell particles into methacrylate based composites for improvement of the mechanical properties
Benedict Sandmann et al.
POLYMER CHEMISTRY (2015)
Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks
Christian Gorsche et al.
POLYMER CHEMISTRY (2015)
Sequential Thiol Click Reactions: Formation of Ternary Thiourethane/Thiol-Ene Networks with Enhanced Thermal and Mechanical Properties
Olivia D. McNair et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Nasim Annabi et al.
ADVANCED MATERIALS (2014)
Manipulating hepatocellular carcinoma cell fate in orthogonally cross-linked hydrogels
Tsai-Yu Lin et al.
BIOMATERIALS (2014)
Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2014)
Bioresorbable scaffolds: rationale, current status, challenges, and future
Javaid Iqbal et al.
EUROPEAN HEART JOURNAL (2014)
Tough Hyperbranched Epoxy/Poly(amido-amine) Modified Bentonite Thermosetting Nanocomposites
Bibekananda De et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Effects of Rare Earth Samarium Oxide on the Properties of Polypropylene-Graft-Cardanol Grafted by Reactive Extrusion
Xinggong Mao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
The development of an Epoxy-amine/Thiol-ene photocurable system
Ricardo Acosta Ortiz et al.
JOURNAL OF POLYMER RESEARCH (2014)
How are Radicals (Re)Generated in Photochemical ATRP?
Thomas G. Ribelli et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Photopolymerizable Synthons from Glycerol Derivatives
Ali Mhanna et al.
JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY (2014)
Controllable Reversible Addition-Fragmentation Termination Monomers for Advances in Photochemically Controlled Covalent Adaptable Networks
Christopher R. Fenoli et al.
MACROMOLECULES (2014)
One-Step Synthesis of Thermally Curable Hyperbranched Polymers by Addition-Fragmentation Chain Transfer Using Divinyl Monomers
Eriko Sato et al.
MACROMOLECULES (2014)
β-Allyl Sulfones as Addition-Fragmentation Chain Transfer Reagents: A Tool for Adjusting Thermal and Mechanical Properties of Dimethacrylate Networks
Christian Gorsche et al.
MACROMOLECULES (2014)
Oxygen Tolerance Study of Photoinduced Electron Transfer-Reversible Addition-Fragmentation Chain Transfer (PET-RAFT) Polymerization Mediated by Ru(bpy)3Cl2
Jiangtao Xu et al.
MACROMOLECULES (2014)
Thiol-yne 'click'/coupling chemistry and recent applications in polymer and materials synthesis and modification
Andrew B. Lowe
POLYMER (2014)
Photolatent amines producing a strong base as photocatalyst for the in-situ preparation of organic-inorganic hybrid coatings
Marco Sangermano et al.
POLYMER (2014)
Enzymatic synthesis of hyaluronic acid vinyl esters for two-photon microfabrication of biocompatible and biodegradable hydrogel constructs
Xiao-Hua Qin et al.
POLYMER CHEMISTRY (2014)
Development of acrylate-based material using a multivariable approach: additive manufacturing applications
Marlon Wesley Machado Cunico et al.
RAPID PROTOTYPING JOURNAL (2014)
The formulator's guide to anti-oxygen inhibition additives
Branislav Husar et al.
PROGRESS IN ORGANIC COATINGS (2014)
Convenient Preparation of Bactericidal Hydrogels by Covalent Attachment of Stabilized Antimicrobial Peptides Using Thiol-ene Click Chemistry
Rik T. C. Cleophas et al.
ACS MACRO LETTERS (2014)
Tough nanocomposite double network hydrogels reinforced with clay nanorods through covalent bonding and reversible chain adsorption
Guorong Gao et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
Impact Properties of Thiol-Ene Networks
Olivia D. McNair et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
External Regulation of Controlled Polymerizations
Frank A. Leibfarth et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
In Situ Forming Hydrogels via Catalyst-Free and Bioorthogonal Tetrazole-Alkene Photo-Click Chemistry
Yaping Fan et al.
BIOMACROMOLECULES (2013)
Covalent adaptable networks: smart, reconfigurable and responsive network systems
Christopher J. Kloxin et al.
CHEMICAL SOCIETY REVIEWS (2013)
Application to Photoreactive Materials of Photochemical Generation of Superbases with High Efficiency Based on Photodecarboxylation Reactions
Koji Arimitsu et al.
CHEMISTRY OF MATERIALS (2013)
Effect of new hyperbranched polyester of varying generations on toughening of epoxy resin through interpenetrating polymer networks using urethane linkages
D. Manjula Dhevi et al.
EUROPEAN POLYMER JOURNAL (2013)
Partially crystalline polyols lead to morphology changes and improved mechanical properties of cationically polymerized epoxy resins
Hendrik Luetzen et al.
EUROPEAN POLYMER JOURNAL (2013)
Polymerization-induced phase separation and resulting thermomechanical properties of thermosetting/reactive nonlinear polymer blends: A review
Yuhong Liu
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Effect of hybridization of liquid rubber and nanosilica particles on the morphology, mechanical properties, and fracture toughness of epoxy composites
Shi Ai Xu et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Thiol-ene photopolymerization for efficient curing of vinyl esters
Andreas Mautner et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2013)
Efficient Stabilization of Thiol-ene Formulations in Radical Photopolymerization
Paricher Esfandiari et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2013)
Three-Dimensional Microfabrication of Protein Hydrogels via Two-Photon-Excited Thiol-Vinyl Ester Photopolymerization
Xiao-Hua Qin et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2013)
Double network hydrogels with extremely high toughness and their applications
Yang Ho Na
KOREA-AUSTRALIA RHEOLOGY JOURNAL (2013)
Core/Shell PBA/PMMA-PGMA Nanoparticles to Enhance the Impact Resistance of UV-Cured Epoxy Systems
Mohamed Naguib et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2013)
Fracture Toughness Enhancement of UV-Cured Epoxy Coatings Containing Al2O3 Nanoparticles
Marco Sangermano et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2013)
Toughening Epoxy Thermosets with Block Ionomers: The Role of Phase Domain Size
Shuying Wu et al.
MACROMOLECULES (2013)
Bioorthogonal Click Chemistry: An Indispensable Tool to Create Multifaceted Cell Culture Scaffolds
Malar A. Azagarsamy et al.
ACS MACRO LETTERS (2013)
Rapid manufacture of monolithic micro-actuated forceps inspired by echinoderm pedicellariae
S. J. Leigh et al.
BIOINSPIRATION & BIOMIMETICS (2012)
Thiol-Ene Photopolymerizations Provide a Facile Method To Encapsulate Proteins and Maintain Their Bioactivity
Joshua D. McCall et al.
BIOMACROMOLECULES (2012)
Cross-Linking and Degradation of Step-Growth Hydrogels Formed by Thiol-Ene Photoclick Chemistry
Han Shih et al.
BIOMACROMOLECULES (2012)
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Thomas Billiet et al.
BIOMATERIALS (2012)
Emulsion polymerization of styrene using irreversible addition-fragmentation chain transfer agents: effect on the course of the polymerization and molecular weight
Li An et al.
COLLOID AND POLYMER SCIENCE (2012)
Young's modulus measurement of two-photon polymerized micro-cantilevers by using nanoindentation equipment
Klaus Cicha et al.
JOURNAL OF APPLIED PHYSICS (2012)
Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB)
Wenying Zhou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Photopolymerization using Photolatent Amine Catalysts
H. Salmi et al.
JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY (2012)
Synthesis of a new hyperbranched-linear-hyperbranched triblock copolymer and its use as a chemical modifier for the cationic photo and thermal curing of epoxy resins
D. Foix et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2012)
Hard-block degradable thermoplastic urethane-elastomers for electrospun vascular prostheses
Stefan Baudis et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2012)
Efficient Curing of Vinyl Carbonates by Thiol-Ene Polymerization
Andreas Mautner et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2012)
Stress Reduction and Tg Enhancement in Ternary Thiol-Yne-Methacrylate Systems via Addition-Fragmentation Chain Transfer
Hee Young Park et al.
MACROMOLECULES (2012)
Stress Relaxation via Addition-Fragmentation Chain Transfer in High Tg, High Conversion Methacrylate-Based Systems
Hee Young Park et al.
MACROMOLECULES (2012)
Mechanical Properties of End-Linked PEG/PDMS Hydrogels
Jun Cui et al.
MACROMOLECULES (2012)
Properties of epoxy-amine networks containing nanostructured ether-crosslinked domains
Ying-Gev Hsu et al.
MATERIALS CHEMISTRY AND PHYSICS (2012)
Impact resistance enhancement by adding epoxy ended hyperbranched polyester to DGEBA photocured thermosets
D. Foix et al.
POLYMER (2012)
A new approach to network heterogeneity: Polymerization induced phase separation in photo-initiated, free-radical methacrylic systems
Caroline R. Szczepanski et al.
POLYMER (2012)
Super tough double network hydrogels and their application as biomaterials
Md. Anamul Haque et al.
POLYMER (2012)
Studies on the viscoelasticity of poly(trimethylene terephthalate)/poly(ethylene-octene)/organomontmorillonite nanocomposites
Feng Liu et al.
POLYMER COMPOSITES (2012)
Additive manufacturing of tissues and organs
Ferry P. W. Melchels et al.
PROGRESS IN POLYMER SCIENCE (2012)
Role of Localized Network Damage in Block Copolymer Toughened Epoxies
Carmelo Declet-Perez et al.
ACS MACRO LETTERS (2012)
An overview of tissue and whole organ decellularization processes
Peter M. Crapo et al.
BIOMATERIALS (2011)
Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering
Stefan Baudis et al.
BIOMEDICAL MATERIALS (2011)
Thiol-ene-methacrylate composites as dental restorative materials
Jordan E. Boulden et al.
DENTAL MATERIALS (2011)
Vinylcarbonates and Vinylcarbamates: Biocompatible Monomers for Radical Photopolymerization
Christian Heller et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2011)
Biomaterials Based on Low Cytotoxic Vinyl Esters for Bone Replacement Application
Branislav Husar et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2011)
Self-healing linear polymers based on RAFT polymerization
Li Yao et al.
POLYMER (2011)
One component photo-curing agent for epoxy resins based on multifunctional photobase generators containing oxime-urethane groups
Kyu Ho Chae et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2011)
New pegylated hyperbranched polyester as chemical modifier of epoxy resins in UV cationic photocuring
D. Foix et al.
REACTIVE & FUNCTIONAL POLYMERS (2011)
Characterization of a biodegradable electrospun polyurethane nanofiber scaffold: Mechanical properties and cytotoxicity
Masoud Yeganegi et al.
ACTA BIOMATERIALIA (2010)
Thiol-Ene Click Chemistry
Charles E. Hoyle et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Interfacial adhesion improvement of plain woven carbon fiber reinforced epoxy filled with micro-fibrillated cellulose by addition liquid rubber
Mohamed H. Gabr et al.
JOURNAL OF MATERIALS SCIENCE (2010)
The Power of Thiol-ene Chemistry
Matthew J. Kade et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2010)
Chain Confinement in Polymer Nanocomposites and Its Effect on Polymer Bulk Properties
Yves Termonia
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)
'Living' Controlled in Situ Gelling Systems: Thiol-Disulfide Exchange Method toward Tailor-Made Biodegradable Hydrogels
De-Cheng Wu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Synthesis, Thiol-Yne Click Photopolymerization, and Physical Properties of Networks Derived from Novel Multifunctional Alkynes
Justin W. Chan et al.
MACROMOLECULES (2010)
Reaction Rates and Mechanisms for Radical, Photoinitated Addition of Thiols to Alkynes, and Implications for Thiol-Yne Photopolymerizations and Click Reactions
Benjamin D. Fairbanks et al.
MACROMOLECULES (2010)
Toughening of Epoxies with Block Copolymer Micelles of Wormlike Morphology
Jia (Daniel) Liu et al.
MACROMOLECULES (2010)
Structure-property relations of 55 nm particle-toughened epoxy
Quyen-Huyen Le et al.
POLYMER (2010)
Modeling diffusion-control in the cure kinetics of epoxy-amine thermoset resins An approach based on configurational entropy
Silvia Corezzi et al.
POLYMER (2010)
Photopolymerized thiol-ene systems as shape memory polymers
Devatha P. Nair et al.
POLYMER (2010)
Thermal, tensile and morphological properties of gamma-ray irradiated epoxy-clay nanocomposites toughened with a liquid rubber
Kyoung-Yong Lee et al.
POLYMER TESTING (2010)
The world of smart healable materials
Erin B. Murphy et al.
PROGRESS IN POLYMER SCIENCE (2010)
Strain rate effect on toughening of nano-sized PEP-PEO block copolymer modified epoxy
Jia (Daniel) Liu et al.
ACTA MATERIALIA (2009)
A Versatile Synthetic Extracellular Matrix Mimic via Thiol-Norbornene Photopolymerization
Benjamin D. Fairbanks et al.
ADVANCED MATERIALS (2009)
Bioapplications of RAFT Polymerization
Cyrille Boyer et al.
CHEMICAL REVIEWS (2009)
Quantitation of the reinforcement effect of silica nanoparticles in epoxy resins used in liquid composite moulding processes
T. Mahrholz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
The mechanical properties of nanofilled resin-based composites: Characterizing discrete filler particles and agglomerates using a micromanipulation technique
Andrew R. Curtis et al.
DENTAL MATERIALS (2009)
Design of Photoacid Generating Systems
James V. Crivello
JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY (2009)
A new method for the determination of damping in cocured composite laminates with embedded viscoelastic layer
Lijian Pan et al.
JOURNAL OF SOUND AND VIBRATION (2009)
Morphology Development in Thermosetting Mixtures through the Variation on Chemical Functionalization Degree of Poly(styrene-b-butadiene) Diblock Copolymer Modifiers. Thermomechanical Properties
Connie Ocando et al.
MACROMOLECULES (2009)
Anomalous fracture behavior in an epoxy-based hybrid composite
B. T. Marouf et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Rubber-Toughened Epoxies: A Critical Review
R. Bagheri et al.
POLYMER REVIEWS (2009)
Rapid manufacture of custom-fitting surgical guides
Richard Bibb et al.
RAPID PROTOTYPING JOURNAL (2009)
Strong, tailored, biocompatible shape-memory polymer networks
Christopher M. Yakacki et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Highly Versatile and Robust Materials for Soft Imprint Lithography Based on Thiol-ene Click Chemistry
Luis M. Campos et al.
ADVANCED MATERIALS (2008)
Electrospun nanofiber reinforced and toughened composites through in situ nano-interface formation
Song Lin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Kinetics analysis and physical properties of photocured silicate-based thiol-ene nanocomposites: The effects of vinyl POSS ene on the polymerization kinetics and physical properties of thiol-triallyl ether networks
Tolecia S. Clark et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2008)
Microphase separation in thermosetting blends of epoxy resin and poly(ε-caprolactone)-block-polystyrene block copolymers
Fanliang Meng et al.
MACROMOLECULES (2008)
Kinetics of photopolymerization-induced phase separation and morphology development in mixtures of a nematic liquid crystal and multifunctional acrylate
Hatice Duran et al.
POLYMER (2008)
Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber
Raju Thomas et al.
POLYMER (2008)
Fracture behaviours of in situ silica nanoparticle-filled epoxy at different temperatures
Hui Zhang et al.
POLYMER (2008)
Radical addition-fragmentation chemistry in polymer synthesis
Graeme Moad et al.
POLYMER (2008)
Biodegradable polyurethanes: Synthesis and applications in regenerative medicine
Scott A. Guelcher
TISSUE ENGINEERING PART B-REVIEWS (2008)
Control of the block copolymer morphology in templated epoxy thermosets
Theresa J. Hermel-Davidock et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2007)
Photopolymers for rapid prototyping
R. Liska et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2007)
Thiol-ene free-radical and vinyl ether cationic hybrid photopolymerization
Huanyu Wei et al.
MACROMOLECULES (2007)
Quantitative evaluation of fracture, healing and re-healing of a reversibly cross-linked polymer
Thomas A. Plaisted et al.
ACTA MATERIALIA (2007)
Morphology and thermomechanical properties of nanostructured thermosetting blends of epoxy resin and poly(ε-caprolactone)-block-polydimethylsiloxane-block-poly(ε-caprolactone) triblock copolymer
Zhiguang Xu et al.
POLYMER (2007)
Ternary thiol-ene/acrylate photopolymers: Effect of acrylate structure on mechanical properties
Askim F. Senyurt et al.
MACROMOLECULES (2007)
Thermal and mechanical properties of cross-linked photopolymers based on multifunctional thiol-urethane ene monomers
Askim F. Senyurt et al.
MACROMOLECULES (2007)
Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin - Effects of a liquid rubber inclusion
Raju Thomas et al.
POLYMER (2007)
Advancements in photoinitiators -: Opening up new applications for radiation curing
K. Dietliker et al.
PROGRESS IN ORGANIC COATINGS (2007)
Toughening polymeric composites using nanoclay: Crack tip scale effects on fracture toughness
Arun K. Subramaniyan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Nanostructured thermoset epoxy resin templated by an amphiphilic poly(ethylene oxide)-block-poly(dimethylsiloxane) diblock copolymer
Qipeng Guo et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2006)
Epoxy toughening using low molecular weight poly(hexylene oxide)-poly(ethylene oxide) diblock copolymers
Yonathan S. Thio et al.
MACROMOLECULES (2006)
Polymer-nanoparticle interfacial interactions in polymer nanocomposites: Confinement effects on glass transition temperature and suppression of physical aging
Perla Rittigstein et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2006)
Improved toughness in HIPS obtained from different styrene/butadiene-graded block copolymers through modification of the polydispersity index of the PS block
Graciela Morales et al.
POLYMER ENGINEERING AND SCIENCE (2006)
Physical and mechanical properties of photopolymerized thiol-ene/acrylates
Askim F. Senyurt et al.
MACROMOLECULES (2006)
Toward microphase separation in epoxy systems containing PEO-PPO-PEO block copolymers by controlling cure conditions and molar ratios between blocks
M. Larranaga et al.
COLLOID AND POLYMER SCIENCE (2006)
Time-resolved light scattering of the phase separation in polymer-dispersed liquid crystals formed by photo-polymerization induced phase separation
N. J. Crawford et al.
POLYMER (2006)
Formation of ordered nanostructures in epoxy thermosets: A mechanism of reaction-induced microphase separation
Fanliang Meng et al.
MACROMOLECULES (2006)
Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content
H Zhang et al.
ACTA MATERIALIA (2006)
Integrated approach to studying the development and final network properties of urethane acrylate coatings
SM Gasper et al.
MACROMOLECULES (2006)
Phase behavior, crystallization, and nanostructures in thermoset blends of epoxy resin and amphiphilic star-shaped block copolymers
QP Guo et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2006)
Study on modification of epoxy resins with acrylate liquid rubber containing pendant epoxy groups
J Kong et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Nanostructured thermosetting blends of epoxy resin and amphiphilic poly(ε-caprolactone)-block-polybutadiene-block-poly(ε-caprolactone) triblock copolymer
FL Meng et al.
MACROMOLECULES (2006)
Synthesis of well-defined hydrogel networks using Click chemistry
Michael Malkoch et al.
CHEMICAL COMMUNICATIONS (2006)
Investigations of step-growth thiol-ene polymerizations for novel dental restoratives
H Lu et al.
DENTAL MATERIALS (2005)
Epoxy-silica particulate nanocomposites: Chemical interactions, reinforcement and fracture toughness
G Ragosta et al.
POLYMER (2005)
Micro- or nanoseparated phases in thermoset blends of an epoxy resin and PEO-PPO-PEO triblock copolymer
M Larrañaga et al.
POLYMER (2005)
Effects of nano calcium carbonate modified by a lanthanum compound on the properties of polypropylene
T Guo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Structure and properties of PBO-PEO diblock copolymer modified epoxy
JX Wu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2005)
Experimental trends in polymer nanocomposites - a review
J Jordan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Novel hydrogels with excellent mechanical performance
Y Tanaka et al.
PROGRESS IN POLYMER SCIENCE (2005)
The influence of cure conditions on the morphology and phase distribution in a rubber-modified epoxy resin using scanning electron microscopy and atomic force microscopy
B Russell et al.
POLYMER (2005)
Macromonomer synthesis using oligomers of ω-unsaturated methacrylate as addition-fragmentation chain transfer agents:: Increased efficiency by manipulation of steric hindrance
E Sato et al.
MACROMOLECULES (2004)
Modification of epoxy by a liquid elastomer and solid rubber particles
C Celikbilek et al.
POLYMER BULLETIN (2004)
New developments in photoinitiators
K Dietliker et al.
MACROMOLECULAR SYMPOSIA (2004)
Toughening of vinyl ester resin using butadiene-acrylonitrile rubber modifiers
EJ Robinette et al.
POLYMER (2004)
Chain transfer activity of ω-unsaturated methacrylic oligomers in polymerizations of methacrylic monomers
L Hutson et al.
MACROMOLECULES (2004)
Thiol-enes: Chemistry of the past with promise for the future
CE Hoyle et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2004)
Crack healing in polymeric materials via photochemical [2+2] cycloaddition
CM Chung et al.
CHEMISTRY OF MATERIALS (2004)
Reactive tetrablock copolymers containing glycidyl methacrylate. Synthesis and morphology control in epoxy-amine networks
V Rebizant et al.
MACROMOLECULES (2003)
Toughening of epoxy resins by hydroxy-terminated, silicon-modified polyurethane oligomers
S Bhuniya et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Thiol-ene photopolymerization mechanism and rate limiting step changes for various vinyl functional group chemistries
NB Cramer et al.
MACROMOLECULES (2003)
Double-network hydrogels with extremely high mechanical strength
JP Gong et al.
ADVANCED MATERIALS (2003)
Models of multivinyl free radical photopolymerization kinetics
TM Lovestead et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2003)
Photopolymerization reactions under visible lights: principle, mechanisms and examples of applications
JP Fouassier et al.
PROGRESS IN ORGANIC COATINGS (2003)
Fast monomers: Factors affecting the inherent reactivity of acrylate monomers in photoinitiated acrylate polymerization
JFGA Jansen et al.
MACROMOLECULES (2003)
Photoinitiated crosslinked degradable copolymer networks for tissue engineering applications
KA Davis et al.
BIOMATERIALS (2003)
New thermally remendable highly cross-linked polymeric materials
XX Chen et al.
MACROMOLECULES (2003)
Epoxy nanocomposites with high mechanical and tribological performance
B Wetzel et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Toughening of polypropylene with calcium carbonate particles
WCJ Zuiderduin et al.
POLYMER (2003)
Optimization and characterization of UV-curable adhesives for optical communications by response surface methodology
HK Kim et al.
POLYMER TESTING (2003)
High performance UV-cured coatings for wood protection
R Bongiovanni et al.
PROGRESS IN ORGANIC COATINGS (2002)
Effect of curing sequence on the photopolymerization and thermal curing kinetics of dimethacrylate/epoxy interpenetrating polymer networks
K Dean et al.
MACROMOLECULES (2002)
Bonding glass and other substrates with UV curing adhesives
B Goss
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2002)
ABC triblock copolymers/epoxy-diamine blends. 1. Keys to achieve nanostructured thermosets
S Ritzenthaler et al.
MACROMOLECULES (2002)
Polypropylene/calcium carbonate nanocomposites
CM Chan et al.
POLYMER (2002)
Effects of coupling agent and morphology on the impact strength of high density polyethylene/CaCO3 composites
ZH Liu et al.
POLYMER (2002)
Modification of epoxy resin using reactive liquid (ATBN) rubber
N Chikhi et al.
EUROPEAN POLYMER JOURNAL (2002)
Development of a comprehensive free radical photopolymerization model incorporating heat and mass transfer effects in thick films
MD Goodner et al.
CHEMICAL ENGINEERING SCIENCE (2002)
The persistent radical effect: A principle for selective radical reactions and living radical polymerizations
H Fischer
CHEMICAL REVIEWS (2001)
Micellar structure and mechanical properties of block copolymer-modified epoxies
JM Dean et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2001)
Toughening of epoxy resin modified with in situ polymerized thermoplastic polymers
K Mimura et al.
POLYMER (2001)
Kinetics of thiol-ene and thiol-acrylate photopolymerizations with real-time Fourier transform infrared
NB Cramer et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2001)
UV-radiation curing of acrylate/epoxide systems
C Decker et al.
POLYMER (2001)
New developments of polymeric dental composites
N Moszner et al.
PROGRESS IN POLYMER SCIENCE (2001)
Primary cyclization in the polymerization of bis-GMA and TEGDMA: a modeling approach to understanding the cure of dental resins
JE Elliott et al.
DENTAL MATERIALS (2001)
Liquid rubber modified vinyl ester resins: fracture and mechanical behavior
ML Auad et al.
POLYMER (2001)
Photoinitiated cross-linking of a thiol-methacrylate system
L Lecamp et al.
POLYMER (2001)
Fracture energy of gels
Y Tanaka et al.
EUROPEAN PHYSICAL JOURNAL E (2000)
Characterization of hydrogels formed from acrylate modified poly(vinyl alcohol) macromers
P Martens et al.
POLYMER (2000)
Dynamics and morphology in nanostructured thermoset network/block copolymer blends during network formation
J Mijovic et al.
MACROMOLECULES (2000)
A decrease in effective acrylate propagation rate constants caused by intramolecular chain transfer
C Plessis et al.
MACROMOLECULES (2000)
Photocurable epoxy-polyol matrices for use in dental composites I
DA Tilbrook et al.
BIOMATERIALS (2000)