Related references
Note: Only part of the references are listed.Static Strength of V-Notches With End Holes Under Combined Tension-Shear Loading: Experimental Measurement by the Disk Test and Theoretical Prediction by the Local Energy
A. R. Torabi et al.
JOURNAL OF TESTING AND EVALUATION (2017)
Cyclic plasticity in three-dimensional notched components under in-phase multiaxial loading at R =-1
A. Campagnolo et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
Brittle fracture in key-hole notches under mixed mode loading: Experimental study and theoretical predictions
R. Torabi et al.
ENGINEERING FRACTURE MECHANICS (2015)
Stress-based criteria for brittle fracture in key-hole notches under mixed mode loading
A. R. Torabi et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)
Mode II notch fracture toughness measurement for key-hole notches by the disk test
A. R. Torabi et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2015)
Local strain energy density to predict mode II brittle fracture in Brazilian disk specimens weakened by V-notches with end holes
A. R. Torabi et al.
MATERIALS & DESIGN (2015)
Tensile Fracture Analysis of V-Notches with End Holes by Means of the Local Energy
A. R. Torabi et al.
PHYSICAL MESOMECHANICS (2015)
Brittle Failure of Graphite Weakened by V-Notches: A Review of Some Recent Results Under Different Loading Modes
F. Berto et al.
STRENGTH OF MATERIALS (2015)
An improved Finite Fracture Mechanics approach to blunt V-notch brittle fracture mechanics: Experimental verification on ceramic, metallic, and plastic materials
Alberto Sapora et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)
Fracture assessment of VO-notches under mode II loading: Experiments and theories
A. R. Torabi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)
Tensile Fracture Analysis of V-Notches with End Holes by Means of the Local Energy
A. R. Torabi et al.
PHYSICAL MESOMECHANICS (2015)
Fracture assessment of graphite V-notched and U-notched specimens by using the cohesive crack model
D. A. Cendon et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Brittle fracture in V-notches with end holes
A. R. Torabi et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
Experimental and theoretical investigation of brittle fracture in key-hole notches under mixed mode I/II loading
A. R. Torabi et al.
ACTA MECHANICA (2015)
T-stress effects on crack kinking in Finite Fracture Mechanics
Pietro Cornetti et al.
ENGINEERING FRACTURE MECHANICS (2014)
Pure shear fracture study in a brittle graphite material containing a U-notch
A. R. Torabi et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)
Strain energy density to assess mode II fracture in U-notched disk-type graphite plates
A. R. Torabi et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)
Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading
A. R. Torabi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)
Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches
F. Berto et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)
Mixed mode fracture assessment of U-notched graphite Brazilian disk specimens by means of the local energy
A. R. Torabi et al.
STRUCTURAL ENGINEERING AND MECHANICS (2014)
Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch
A. R. Torabi et al.
ENGINEERING FRACTURE MECHANICS (2013)
On the use of the Equivalent Material Concept to predict tensile load-bearing capacity of ductile steel bolts containing V-shaped threads
A. R. Torabi
ENGINEERING FRACTURE MECHANICS (2013)
A Finite Fracture Mechanics approach to V-notched elements subjected to mixed-mode loading
Alberto Sapora et al.
ENGINEERING FRACTURE MECHANICS (2013)
A 50-year retrospective review of three-dimensional effects at cracks and sharp notches
L. P. Pook
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
Ultimate Bending Strength Evaluation of U-Notched Ductile Steel Samples Under Large-Scale Yielding Conditions
A. R. Torabi
INTERNATIONAL JOURNAL OF FRACTURE (2013)
Fracture Assessment of U-Notched Graphite Plates Under Tension
A. R. Torabi
INTERNATIONAL JOURNAL OF FRACTURE (2013)
Finite Fracture Mechanics model for mixed mode fracture in adhesive joints
P. Weissgraeber et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
A review on coupled modes in V-notched plates of finite thickness: A generalized approach to the problem
F. Berto
PHYSICAL MESOMECHANICS (2013)
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
A. R. Torabi et al.
STRENGTH OF MATERIALS (2013)
Finite Fracture Mechanics at elastic interfaces
P. Cornetti et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Estimation of tensile load-bearing capacity of ductile metallic materials weakened by a V-notch: The equivalent material concept
A. R. Torabi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
The effect of the boundary conditions on in-plane and out-of-plane stress field in three dimensional plates weakened by free-clamped V-notches
F. Berto et al.
PHYSICAL MESOMECHANICS (2012)
Mixed mode brittle fracture of sharp and blunt V-notches in polycrystalline graphite
M. R. Ayatollahi et al.
CARBON (2011)
Experimental verification of RV-MTS model for fracture in soda-lime glass weakened by a V-notch
M. R. Ayatollahi et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2011)
Fracture assessment of U-notches under three point bending by means of local energy density
F. Berto et al.
MATERIALS & DESIGN (2011)
Fracture assessment of Brazilian disc specimens weakened by blunt V-notches under mixed mode loading by means of local energy
F. Berto et al.
MATERIALS & DESIGN (2011)
Investigation of mixed mode brittle fracture in rounded-tip V-notched components
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2010)
Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applications
Paolo Lazzarin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Brittle fracture in rounded-tip V-shaped notches
M. R. Ayatollahi et al.
MATERIALS & DESIGN (2010)
Fracture of U-notched specimens under mixed mode: Experimental results and numerical predictions
F. J. Gomez et al.
ENGINEERING FRACTURE MECHANICS (2009)
Fracture of V-notched specimens under mixed mode (I plus II) loading in brittle materials
F. J. Gomez et al.
INTERNATIONAL JOURNAL OF FRACTURE (2009)
A review of the volume-based strain energy density approach applied to V-notches and welded structures
F. Berto et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2009)
Some advantages derived from the use of the strain energy density over a control volume in fatigue strength assessments of welded joints
P. Lazzarin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
A critical distance study of stress concentrations in bone
Saeid Kasiri et al.
JOURNAL OF BIOMECHANICS (2008)
Fracture assessment of U-notches under mixed mode loading:: two procedures based on the 'equivalent local mode I' concept
F. Berto et al.
INTERNATIONAL JOURNAL OF FRACTURE (2007)
Local strain energy to assess the static failure of U-notches in plates under mixed mode loading
F. J. Gomez et al.
INTERNATIONAL JOURNAL OF FRACTURE (2007)
Failure criteria for linear elastic materials with U-notches
F. J. Gomez et al.
INTERNATIONAL JOURNAL OF FRACTURE (2006)
Failure criteria for brittle elastic materials
Z Yosibash et al.
INTERNATIONAL JOURNAL OF FRACTURE (2004)
Predicting the fracture strength of ceramic materials using the theory of critical distances
D Taylor
ENGINEERING FRACTURE MECHANICS (2004)
A fracture criterion for sharp V-notched samples
FJ Gómez et al.
INTERNATIONAL JOURNAL OF FRACTURE (2003)
A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches
P Lazzarin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2001)
Cracking in PMMA containing U-shaped notches
FJ Gómez et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2000)
Share Paper
