Related references
Note: Only part of the references are listed.Printing Tablets with Fully Customizable Release Profiles for Personalized Medicine
Yajuan Sun et al.
ADVANCED MATERIALS (2015)
Polyglycolic acid microneedles modified with inkjet-deposited antifungal coatings
Ryan D. Boehm et al.
BIOINTERPHASES (2015)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
A flexible-dose dispenser for immediate and extended release 3D printed tablets
Katarzyna Pietrzak et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Continuous manufacturing of extended release tablets via powder mixing and direct compression
Tuomas Ervasti et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Inkjet printing of transdermal microneedles for the delivery of anticancer agents
Md Jasim Uddin et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Personalised dosing: Printing a dose of one's own medicine
Mustafa Alomari et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Effect of geometry on drug release from 3D printed tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
Alice Melocchi et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2015)
Three-Dimensional Printing of Drug-Eluting Implants: Preparation of an Antimicrobial Polylactide Feedstock Material
Jorrit Jeroen Water et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
Polyglycolic acid microneedles modified with inkjet-deposited antifungal coatings
Ryan D. Boehm et al.
BIOINTERPHASES (2015)
In vitro evaluation of the bond strength between various ceramics and cobalt-chromium alloy fabricated by selective laser sintering
Eun-Jeong Bae et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2015)
Tablet Splitting: Is It Worthwhile? Analysis of Drug Content and Weight Uniformity for Half Tablets of 16 Commonly Used Medications in the Outpatient Setting
Sally A. Helmy
JOURNAL OF MANAGED CARE & SPECIALTY PHARMACY (2015)
Fused-filament 3D printing (3DP) for fabrication of tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Niklas Sandler et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
The accuracy, precision and sustainability of different techniques for tablet subdivision: Breaking by hand and the use of tablet splitters or a kitchen knife
Diana A. van Riet-Nales et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
3-dimensional (3D) fabricated polymer based drug delivery systems
Simon E. Moulton et al.
JOURNAL OF CONTROLLED RELEASE (2014)
Stereolithography in tissue engineering
Shelby A. Skoog et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)
Isoniazid, Pyrazinamide and Rifampicin Content Variation in Split Fixed-Dose Combination Tablets
Thomas Pouplin et al.
PLOS ONE (2014)
Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing
Barbara Lorber et al.
BIOFABRICATION (2014)
Accuracy of tablet splitting: Comparison study between hand splitting and tablet cutter
Walid A. Habib et al.
SAUDI PHARMACEUTICAL JOURNAL (2014)
Influence of β-Cyclodextrin on Cefixime Stability in Liquid Suspension Dosage Form
Jessie Sofia Pamudji et al.
INTERNATIONAL SEMINAR ON NATURAL PRODUCT MEDICINES, ISNPM 2012 (2014)
Difficulties swallowing solid oral dosage forms in a general practice population: prevalence, causes, and relationship to dosage forms
Julia T. Schiele et al.
EUROPEAN JOURNAL OF CLINICAL PHARMACOLOGY (2013)
Additive manufacturing and its societal impact: a literature review
Samuel H. Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
A Step Toward Development of Printable Dosage Forms for Poorly Soluble Drugs
Dhara Raijada et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2013)
Three-dimensional drug printing: A structured review
Iulia Ursan et al.
JOURNAL OF THE AMERICAN PHARMACISTS ASSOCIATION (2013)
Preparation and properties of porous Ti-10Mo alloy by selective laser sintering
Fangxia Xie et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
David A. Zopf et al.
NEW ENGLAND JOURNAL OF MEDICINE (2013)
On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering
Brecht Van Hooreweder et al.
POLYMER TESTING (2013)
Fabrication of drug-loaded polymer microparticles with arbitrary geometries using a piezoelectric inkjet printing system
Byung Kook Lee et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
Extrusion printed polymer structures: A facile and versatile approach to tailored drug delivery platforms
Parawee Rattanakit et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
A paradigm for the development and evaluation of novel implant topologies for bone fixation: Implant design and fabrication
Heesuk Kang et al.
JOURNAL OF BIOMECHANICS (2012)
Regulating Compounding Pharmacies after NECC
Kevin Outterson
NEW ENGLAND JOURNAL OF MEDICINE (2012)
Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability
Chengtie Wu et al.
ACTA BIOMATERIALIA (2011)
Inkjet printing as a novel medicine formulation technique
Nikolaos Scoutaris et al.
JOURNAL OF CONTROLLED RELEASE (2011)
Three-dimensional printing of flash-setting calcium aluminate cement
Anne-Kathrin Maier et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Inkjet Printing of Drug Substances and Use of Porous Substrates-Towards Individualized Dosing
Niklas Sandler et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2011)
Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
Asma B. M. Buanz et al.
PHARMACEUTICAL RESEARCH (2011)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Early Human Bone Response to Laser Metal Sintering Surface Topography: A Histologic Report
Carlo Mangano et al.
JOURNAL OF ORAL IMPLANTOLOGY (2010)
Novel oral fast-disintegrating drug delivery devices with predefined inner structure fabricated by Three-Dimensional Printing
Deng-Guang Yu et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2010)
A poly(D,L-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Ferry P. W. Melchels et al.
BIOMATERIALS (2009)
A programmed release multi-drug implant fabricated by three-dimensional printing technology for bone tuberculosis therapy
Weigang Wu et al.
BIOMEDICAL MATERIALS (2009)
A novel fast disintegrating tablet fabricated by three-dimensional printing
Deng-Guang Yu et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2009)
Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
Phung Xuan Lan et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)
The controlled-releasing drug implant based on the three dimensional printing technology: Fabrication and properties of drug releasing in vivo
Wu Weigang et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2009)
Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants
T. Traini et al.
DENTAL MATERIALS (2008)
Polypill: For Pollyanna
J. David Spence
INTERNATIONAL JOURNAL OF STROKE (2008)
Three-dimensional printing in pharmaceutics: Promises and problems
Deng Guang Yu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Thermal inkjet application in the preparation of oral dosage forms: Dispensing of prednisolone solutions and polymorphic characterization by solid-state spectroscopic techniques
Peter A. Melendez et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Additive Processing of Polymers
Bettina Wendel et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2008)
Ceramic components manufacturing by selective laser sintering
Ph. Bertrand et al.
APPLIED SURFACE SCIENCE (2007)
Photopolymers for rapid prototyping
R. Liska et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2007)
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices
Uwe Gbureck et al.
JOURNAL OF CONTROLLED RELEASE (2007)
Tablets with material gradients fabricated by three-dimensional printing
Deng Guang Yu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2007)
Levofloxacin implants with predefined microstructure fabricated by three-dimensional printing technique
Weidong Huang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
More medications, fewer pills: Combination medications for the treatment of hypertension
Richard Lewanczuk et al.
CANADIAN JOURNAL OF CARDIOLOGY (2007)
Application of fused deposition modelling in controlled drug delivery devices
S. H. Masood
ASSEMBLY AUTOMATION (2007)
Selective laser sintering of PEEK
M. Schmidt et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Building porous biopolymeric microstructures for controlled drug delivery devices using selective laser sintering
K. F. Leong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Influence of layer thickness on mechanical properties in stereolithography
K. Chockalingam et al.
RAPID PROTOTYPING JOURNAL (2006)
Development of near zero-order release dosage forms using three-dimensional printing (3-DP (TM)) technology
CC Wang et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2006)
Fundamentals of selective laser melting of alloyed steel powders
M. Rombouts et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
The design and production of Co-Cr alloy implants with controlled surface topography by CAD-CAM method and their effects on osseointegration
JA Hunt et al.
BIOMATERIALS (2005)
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
JM Williams et al.
BIOMATERIALS (2005)
Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
H Seitz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Layered manufacturing technologies
S McMains
COMMUNICATIONS OF THE ACM (2005)
Laser stereolithography and supercritical fluid processing or custom-designed implant fabrication
VK Popov et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2004)
An assessment of dose-uniformity of samples delivered from paediatric oral droppers
D Brown et al.
JOURNAL OF CLINICAL PHARMACY AND THERAPEUTICS (2004)
Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends
KH Tan et al.
BIOMATERIALS (2003)
Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth
MN Cooke et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2003)
Characterization of microfeatures in selective laser sintered drug delivery devices
CM Cheah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2002)
Characterization of SLS parts for drug delivery devices
KH Low et al.
RAPID PROTOTYPING JOURNAL (2001)
Fabrication of porous polymeric matrix drug delivery devices using the selective laser sintering technique
KF Leong et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2001)
Oral dosage forms fabricated by Three Dimensional Printing™
WE Katstra et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Multimechanism oral dosage forms fabricated by three dimensional printing™
CW Rowe et al.
JOURNAL OF CONTROLLED RELEASE (2000)