☆ 3.9 Article

Strategies for compatibilization of polymer/waste tire rubber systems prepared via melt-blending

Advanced Industrial and Engineering Polymer Research (2023)

Related references

Note: Only part of the references are listed.
Article Environmental Sciences

Assessment of the bioaccessibility of PAHs and other hazardous compounds present in recycled tire rubber employed in synthetic football fields

Daniel Armada et al.

Summary: The potential oral bioaccessibility of polycyclic aromatic hydrocarbons (PAHs) from recycled tire crumb rubber (RTCR) surfaces used in synthetic football fields was studied. Fifteen out of the sixteen priority pollutants considered by the EPA were detected in the bioaccessible fractions, as well as 6PPD-quinone and HMMM.

SCIENCE OF THE TOTAL ENVIRONMENT (2023)

Add to Collection
Article Construction & Building Technology

Experimental investigation of raw steel fibers derived from waste tires for sustainable concrete

Asad Zia et al.

Summary: The increasing pollution is a significant obstacle to achieving the United Nations' goals for a sustainable society. The trend of using waste fibers, particularly from discarded tires, in the construction industry to improve the strength and durability of concrete is receiving attention. This study aims to explore the suitability of raw steel fibers from waste tires for producing sustainable and durable cement composites.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection
Review Polymer Science

Self-Healing Elastomers: A sustainable solution for automotive applications

Saul Utrera-Barrios et al.

Summary: Among the most fruitful material-industry relationships is that of rubber and the automotive industry, where rubber is widely used in tires, seals, gaskets, hoses, tubes, and other parts. However, the irreversibly crosslinked structure of rubber poses challenges to its reprocessing and makes it incompatible with the Circular Economy model. Efforts are being made to develop environmentally friendly rubbers through strategies like devulcanization, recycling, and self-healing. This review explores the potential transformative impact of self-healing concepts on the automotive industry's elastomeric matrices, highlighting the path towards a more sustainable future.

EUROPEAN POLYMER JOURNAL (2023)

Add to Collection
Article Chemistry, Physical

Processing, Mechanical and Morphological Properties of GTR Modified by SBS Copolymers

Agnieszka Susik et al.

Summary: Ground tire rubber (GTR) was modified by thermo-mechanical treatment with styrene-butadiene-styrene (SBS) copolymers. The effects of different SBS copolymer grades and content, as well as the thermal and mechanical properties of the modified GTR, were investigated. It was found that linear SBS copolymer showed the most promising modifying effect on GTR in terms of processing behavior. Additionally, the presence of SBS also improved the thermal stability of the modified GTR.

MATERIALS (2023)

Add to Collection
Article Engineering, Multidisciplinary

Synergistic effect of microwave assisted devulcanization of waste NBR rubber and using superhydrophobic/superoleophilic silica nanoparticles on oil-water separation

Reza Ghamarpoor et al.

Summary: In this study, waste nitrile rubber (NBR) was devulcanized and used as an oil/seawater separator. Different amounts of pure and surface modified silica nanoparticles were added to new and recycled NBR compounds. The results showed that modified silica nanoparticles significantly increased the water contact angle and decreased the oil contact angle for both new and recycled NBRs. Additionally, the durability of the sorbent against oil absorption-desorption cycles decreased with recycled rubber, but the oil absorption capacity increased. The modified nanocomposites exhibited high oil separation efficiencies.

ALEXANDRIA ENGINEERING JOURNAL (2023)

Add to Collection
Article

Waste tires based biorefinery for biofuels and value-added materials production

Brooke E. Rogachuk et al.

Chemical Engineering Journal Advances (2023)

Add to Collection
Article Nanoscience & Nanotechnology

Interfacial Engineering with Rigid Nanoplatelets in Immiscible Polymer Blends: Interface Strengthening and Interfacial Curvature Controlling

Lingmin Hu et al.

Summary: The interfacial nanoparticle compatibilization (INC) strategy allows simultaneous functionalization and interfacial engineering of immiscible polymer blends. This study focuses on the incorporation of surface-modified rigid nanoplatelets into an immiscible polymer blend, demonstrating enhanced interfacial adhesion and improved phase morphology and mechanical properties. The stiffness of the nanoplatelets can significantly affect the geometry of the interface.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection
Review Engineering, Chemical

Recent developments in waste tyre pyrolysis and gasification processes

Athi-enkosi Mavukwana et al.

Summary: Waste tyre generation in South Africa lacks a sustainable solution. This article reviews the advances in waste tyre pyrolysis and gasification technologies, highlighting the challenges and successes. The recovery of high-value products and the desired composition of producer gas are key factors for profitability and further application.

CHEMICAL ENGINEERING COMMUNICATIONS (2022)

Add to Collection
Article Chemistry, Physical

GTR/Thermoplastics Blends: How Do Interfacial Interactions Govern Processing and Physico-Mechanical Properties?

Mohammad Reza Saeb et al.

Summary: In this study, GTR/thermoplastics blends were prepared and the relationship between microstructure and processing-performance properties was investigated. The type of thermoplastic modifier had a significant impact on the processing behavior and microstructure of the blends with a high content of GTR. The GTR/thermoplastics ratio affected elongation at break, hardness, and density, while its effect on tensile strength was negligible.

MATERIALS (2022)

Add to Collection
Article Polymer Science

Ground Tire Rubber Modified by Elastomers via Low-Temperature Extrusion Process: Physico-Mechanical Properties and Volatile Organic Emission Assessment

Paulina Wisniewska et al.

Summary: In this research, low-temperature extrusion was used to modify ground tire rubber for better mechanical properties. The emission profile of volatile organic compounds (VOCs) was investigated, revealing that dicumyl peroxide decomposition by-products were the most emitted compounds. The detection level of the devulcanization marker benzothiazole was low.

POLYMERS (2022)

Add to Collection
Article Engineering, Chemical

Microcellular ground tire rubber/ethylene vinyl acetate compounds: Mechanical properties and structure relationships

Jose Francisco Hernandez Gamez et al.

Summary: This study investigates the effect of acetone-treated ground tire rubber (GTR) on mechanical and morphological properties of ethylene-vinyl acetate (EVA) matrix. The results show that the treated GTR compounds improved the performance of EVA/GTR compounds in terms of morphology and mechanical properties, making them suitable for vibration absorber and isolation applications.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection
Article Environmental Sciences

Global evaluation of the chemical hazard of recycled tire crumb rubber employed on worldwide synthetic turf football pitches

Daniel Armada et al.

Summary: This study assessed the presence of organic compounds in fill samples from synthetic turf football pitches, finding carcinogenic substances and endocrine disruptors in most rubber samples, indicating the presence of hazardous substances in recycled crumb rubber on a global scale.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection
Article Multidisciplinary Sciences

Tests of rubber granules used as artificial turf for football fields in terms of toxicity to human health and the environment

Beata Grynkiewicz-Bylina et al.

Summary: Rubber waste is commonly used for synthetic surfaces of sport fields. However, due to restrictions on polycyclic aromatic hydrocarbons (PAHs) and other hazardous chemicals, the recycling of rubber granules may be limited. The research found that the content of PAHs in rubber granules exceeded the standard, highlighting the need for alternative applications.

SCIENTIFIC REPORTS (2022)

Add to Collection
Review Construction & Building Technology

Crumb rubber as partial replacement for fine aggregate in concrete: An overview

Fengming Ren et al.

Summary: This paper reviews the performance of concrete with crumb rubber as fine aggregate, providing evidence for crumb rubber concrete (CRC) materials design and application. The study finds that crumb rubber has an impact on the workability and bonding performance of the concrete, but its performance can be improved through pre-treatments. Additionally, strength reduction and durability performance are important aspects to consider.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection
Article Polymer Science

Compatibilized thermoplastic elastomers based on highly filled polyethylene with ground Tire rubber

Shuang Liu et al.

Summary: Thermoplastic elastomers based on ground tire rubber are effective for recycling waste tire rubber. This study focuses on optimizing parameters such as rubber concentration and dispersion, as well as crosslinking degree, to produce valuable TPE. The addition of a compatibilizer improved the interfacial interactions between the rubber and plastic, resulting in improved mechanical properties and processability for the TPE.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Thermal-based experimental method and kinetic model for predicting the composition of crumb rubber derived from end-of-life vehicle tyres

Da Sun et al.

Summary: This study evaluated the effectiveness of a thermal-based model in predicting the rubber chemical composition of end-of-life vehicle tyres (EOLT)-derived crumb rubber. The thermal model successfully predicted the composition of EOLT-derived crumb rubber enabling rapid screening of such products to match engineering applications.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection
Article Engineering, Environmental

Waste tire rubber devulcanization technologies: State-of-the-art, limitations and future perspectives

Paulina Wisniewska et al.

Summary: Waste tire management is a major global environmental issue, and finding low-cost and industrial-scale tire recycling methods is gaining more attention. The sustainable development of rubber devulcanization technologies and the appropriate design of cradle-to-cradle loops for rubber goods are considered promising strategies for achieving a higher level of rubber recycling. This work presents an overview of patented waste tire rubber devulcanization technologies and discusses their performance characteristics, environmental aspects, and limitations. The findings show that the reclaimed rubbers described in patents have higher tensile strength and elongation break compared to literature data or commercial products, with significant differences attributed to devulcanization efficiency and rubber treatment conditions. Considering environmental and economic aspects, reactive extrusion is identified as the most promising method for further developing rubber devulcanization technologies.

WASTE MANAGEMENT (2022)

Add to Collection
Article Engineering, Environmental

Investigation of gaseous and solid pollutants emitted from waste tire combustion at different temperatures

Dora Mentes et al.

Summary: Consumer society generates a large amount of waste, such as tires. The emissions of pollutants from burning tires are influenced by the firebox temperature, but research on this relationship is limited. In this study, the concentrations of flue gases and solid pollutants from burned tires were investigated experimentally, and the relationship between the decomposition of CaCO3 filler and emitted pollutant concentrations was discovered.

WASTE MANAGEMENT (2022)

Add to Collection
Article Polymer Science

Development of a New Additive Based on Textile Fibers of End-of-Life Tires (ELT) for Sustainable Asphalt Mixtures with Improved Mechanical Properties

Gonzalo Valdes-Vidal et al.

Summary: End-of-life tires are a global issue and this study focuses on developing a waste tire textile fiber-based additive for improving hot mix asphalt. The performance evaluation of the additive demonstrates its ability to enhance the properties of the asphalt mixture and reduce permanent deformation.

POLYMERS (2022)

Add to Collection
Review Green & Sustainable Science & Technology

Towards full recyclability of end-of-life tires: Challenges and opportunities

Mehrdad Seifali Abbas-Abadi et al.

Summary: End-of-life tires are currently not being effectively recycled, with most being incinerated or landfilled. However, processes such as retreading, pulverization, and devulcanization show promise for tire recycling. The use of supercritical carbon dioxide (sc-CO2) pulverization and solvent extraction can improve recycling efficiency. Pyrolysis of tires and the production of activated carbon are also important methods for tire recovery.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection
Article Polymer Science

Manufacturing and characterization of recycled SBR-based composites for surfboard decks

Eduardo Fischer Kerche et al.

Summary: A large amount of waste is generated in footwear production, and SBR scraps can be used to manufacture non-slip surfboard decks. Through the study of composite materials, it is found that the SBS/SBR composite containing 20% SBR scraps meets the requirements for the final application.

JOURNAL OF RUBBER RESEARCH (2022)

Add to Collection
Review Thermodynamics

Tire pyrolysis char: Processes, properties, upgrading and applications

Ningbo Gao et al.

Summary: Waste tires are solid wastes with the potential for great harm to the environment. The pyrolysis of waste tires can recycle energy and produce reusable products. This paper reviews and summarizes the tire char, evaluates the production and application of tire char from waste tires, discusses the thermal decomposition behavior of different tire rubbers, and assesses the factors influencing the yield and quality of tire char. The physical and chemical structural characteristics of tire char are critically reviewed, and high-value application fields and developmental prospects of tire char are summarized.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2022)

Add to Collection
Review Polymer Science

Sustainable Reuse of Waste Tire Textile Fibers (WTTF) as Reinforcements

Ali Fazli et al.

Summary: Waste tire textile fibers are classified as hazardous wastes, traditionally burnt or buried, leading to environmental and ecological issues. Converting them into valuable raw materials for various engineering applications is important, but challenges such as fiber contamination need to be addressed.

POLYMERS (2022)

Add to Collection
Review Construction & Building Technology

Research progress and performance evaluation of crumb-rubber-modified asphalts and their mixtures

Kaixi Duan et al.

Summary: This study systematically investigated the research trends of different types of crumb-rubber-modified asphalts and their mixtures, comparing and evaluating the preparation technology, modification mechanism, and comprehensive performance. Problems that may arise in the preparation of high-content crumb rubber asphalts were also highlighted.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Grafting and reactive extrusion technologies for compatibilization of ground tyre rubber composites: Compounding, properties, and applications

Mapoloko Mpho Phiri et al.

Summary: Chemical modification of ground tyre rubber (GTR) to improve compatibility with the matrix is a common approach, with grafting and reactive extrusion being explored as advanced methods in this study. While grafting is more efficient, its multi-step synthesis protocol and purification procedures make it challenging for industrial applications; in contrast, reactive extrusion, which utilizes existing equipment in the rubber and thermoplastics industries, achieves compatibility through in-situ grafting and is solvent-free, making it a more practical option for industrial use.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Recycle of waste tire rubber in a 3D printed composite with enhanced damping properties

Hieu Tri Nguyen et al.

Summary: This work explores the use of Ground Tire Rubber (GTR) in a cost-effective, recycled composite material. The study finds that increasing the rubber content significantly improves the overall damping properties and increases the diameter of rubber particles. This research is important for the development of high-value parts using waste tires.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection
Review Chemistry, Multidisciplinary

Continuous flow mechanochemistry: reactive extrusion as an enabling technology in organic synthesis

Robert R. A. Bolt et al.

Summary: This tutorial review discusses the translation from batch-mode ball-milling to flow-mode reactive extrusion using twin-screw extrusion. Mechanochemistry has been established as a powerful approach in sustainable organic synthesis, mainly due to the opportunities offered in solvent-free or highly solvent-minimized reaction systems. However, limitations in scale-up still exist.

CHEMICAL SOCIETY REVIEWS (2022)

Add to Collection
Article Environmental Sciences

Effect of Surface Treatment on the Performance of Polyester Composite Filled with Waste Glove Rubber Crumbs

M. Nuzaimah et al.

Summary: This study evaluates surface treatments of rubber crumbs to improve the tensile strength of rubber-polyester composite. NaOH treatment enhances hydrophilic properties of rubber crumbs and improves interfacial adhesion with polyester, leading to an increase in composite strength.

WASTE AND BIOMASS VALORIZATION (2021)

Add to Collection
Review Engineering, Multidisciplinary

Chemical surface etching methods for ground tire rubber as sustainable approach for environmentally-friendly composites development - a review

Mapoloko Mpho Phiri et al.

Summary: This review article summarizes the chemical modification methods of surface etching for ground tire rubber (GTR) to improve its compatibility with various matrices. Different surface etching treatment methods, characterization techniques, and the advantages and limitations of these processes for GTR are discussed in detail.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Preparation of devulcanized ground tire rubber with supercritical carbon dioxide jet pulverization

Zefeng Wang et al.

Summary: The study introduces a novel waste tire rubber reclamation method using supercritical carbon dioxide jet pulverization. Results show that finely ground devulcanized tire rubber with coarse surfaces can be obtained in this process, which is beneficial for size reduction and rubber devulcanization.

MATERIALS LETTERS (2021)

Add to Collection
Review Energy & Fuels

A Review on Management of End of Life Tires (ELTs) and Alternative Uses of Textile Fibers

Panagiotis Grammelis et al.

Summary: Approximately 3 billion tires are commercially transacted worldwide each year, with an equivalent amount disposed of. Despite efforts to increase tire life, the number of discarded tires is expected to rise due to the growing demand for vehicles globally. Around 70% of discarded tires are currently recovered for energy production or production of various materials, while approximately 95% of them can be reused.

ENERGIES (2021)

Add to Collection
Review Engineering, Environmental

An overview on the recycling of waste ground tyre rubbers in thermoplastic matrices: Effect of added fillers

Friday Nwankwo Archibong et al.

Summary: The increasing generation and accumulation of waste tyres threaten the ecosystem, making recycling of waste tyre rubber necessary. One potential recycling strategy is the blending of thermoplastics with ground tyre rubber (GTR), but achieving homogenous dispersion of GTR in matrix poses a challenge, requiring techniques such as surface treatments and additives.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection
Article Engineering, Civil

A novel application of thermoplastic polyurethane/waste rubber powder blend for waterproof seal layer in high-speed railway

Xin Xiao et al.

Summary: The use of thermoplastic polyurethane/waste rubber powder blend to enhance the water resistance of high-speed railway structures shows excellent supporting and waterproofing properties, making it suitable for preventing moisture damage in railway subbase layers.

TRANSPORTATION GEOTECHNICS (2021)

Add to Collection
Article Polymer Science

Processing, Performance Properties, and Storage Stability of Ground Tire Rubber Modified by Dicumyl Peroxide and Ethylene-Vinyl Acetate Copolymers

Paulina Wisniewska et al.

Summary: This study investigated the preparation method and performance of ground tire rubber modified with ethylene-vinyl acetate copolymers. The modified rubber materials demonstrated good tensile strength, elongation at break, storage stability, and processability.

POLYMERS (2021)

Add to Collection
Article Polymer Science

Best Practice for De-Vulcanization of Waste Passenger Car Tire Rubber Granulate Using 2-2′-dibenzamidodiphenyldisulfide as De-Vulcanization Agent in a Twin-Screw Extruder

Hans van Hoek et al.

Summary: The de-vulcanization of rubber using a twin-screw extruder and DBD as the agent shows promise for reusing rubber materials. However, adjustments to the process were necessary due to the high melting point of DBD. This method improved the coherence and tensile properties of the devulcanizate after vulcanization.

POLYMERS (2021)

Add to Collection
Article Environmental Sciences

Analysis of recycled rubber: Development of an analytical method and determination of polycyclic aromatic hydrocarbons and heterocyclic aromatic compounds in rubber matrices

Ewa Skoczynska et al.

Summary: A new analytical method was developed to identify and quantify a wide range of organic compounds in recycled crumb rubber, leading to the detection of 46 sample-specific compounds. The study highlights the need for expanding the list of target compounds analyzed in recycled rubber and for longitudinal studies on weathering processes occurring in recycled crumb rubber.

CHEMOSPHERE (2021)

Add to Collection
Article Materials Science, Composites

Thermo-oxidative exfoliation of carbon black from ground tire rubber as potential reinforcement in green tires

Adeel Ahmad Hassan et al.

Summary: This research presents a self-designed thermo-oxidative reactor for efficient recycling of carbon black from ground tire rubber. The exfoliation of carbon black from rubber was significantly improved to 66.0% after thermo-oxidative reclamation, demonstrating enhanced reinforcement effects in rubber composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection
Article Polymer Science

Thermochemical compatibilization of reclaimed tire rubber/ poly(ethylene-co-vinyl acetate) blend using electron beam irradiation and amine-based chemical

Suganti Ramarad et al.

Summary: Efficiency of APTES in further reclaiming the RTR and compatibilizing the blends improved the mechanical properties of RTR/EVA blends. The presence of APTES increased the dispersion of embedded smaller RTR particles in EVA matrix and crosslinking efficiency of the blends, while reducing the ductility of the blend due to increased interaction between EVA and APTES.

JOURNAL OF POLYMER RESEARCH (2021)

Add to Collection
Article Materials Science, Composites

Reusing ground tire rubber powder as thermoplastic elastomers with excellent superhydrophobicity and self-cleaning performance

Xingshuo Zhang et al.

Summary: The method of preparing superhydrophobic surface using molded LDPE/SBS/GTR thermoplastic elastomers has shown excellent mechanical properties, superhydrophobicity, tearing microstructure, and self-cleaning property.

PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2021)

Add to Collection
Article Chemistry, Physical

SBR Vulcanizates Filled with Modified Ground Tire Rubber

Katarzyna Klajn et al.

Summary: This study compares three different methods of modifying ground tire rubber (GTR) and their effects on the mechanical properties of vulcanizates. The addition of modified GTR particles results in increased stiffness and crosslink density of the vulcanizates, but also leads to decreased friction and increased abrasive wear.

MATERIALS (2021)

Add to Collection
Article Green & Sustainable Science & Technology

Effect of Ground Tire Rubber (GTR) Particle Size and Content on the Morphological and Mechanical Properties of Recycled High-Density Polyethylene (rHDPE)/GTR Blends

Ali Fazli et al.

Summary: The study found that GRT particle size and concentration have significant effects on the properties of TPE blends, particularly leading to inhomogeneity and defects at high concentrations. Smaller GRT particles result in higher tensile strength and toughness in the blends.

RECYCLING (2021)

Add to Collection
Article Materials Science, Composites

On the Use of Mechano-Chemically Modified Ground Tire Rubber (GTR) as Recycled and Sustainable Filler in Styrene-Butadiene Rubber (SBR) Composites

Javier Araujo-Morera et al.

Summary: The surface modification of GTR through cryo-grinding and chemical treatment, followed by its incorporation into rubber composites, has resulted in improved mechanical performance of the composite material.

JOURNAL OF COMPOSITES SCIENCE (2021)

Add to Collection
Review Engineering, Civil

Waste tires steel fiber in concrete: a review

Temitope F. Awolusi et al.

Summary: The emergence of waste tire steel fibers provide a sustainable solution for the construction industry by extracting useful materials from discarded tires. The length of these fibers has a significant impact on the strength properties of concrete, particularly in enhancing flexural strength.

INNOVATIVE INFRASTRUCTURE SOLUTIONS (2021)

Add to Collection
Article Green & Sustainable Science & Technology

Sustainable reuse of Waste Tire Textile Fibers (WTTFs) as reinforcement materials for expansive soils: With a special focus on landfill liners/covers

S. S. Narani et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection
Article Materials Science, Composites

Ground tire rubber (GTR) surface modification using thiol-ene click reaction: Polystyrene grafting to modify a GTR/polystyrene (PS) blend

Huan Liang et al.

PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2020)

Add to Collection
Review Chemistry, Physical

Waste Rubber Recycling: A Review on the Evolution and Properties of Thermoplastic Elastomers

Ali Fazli et al.

MATERIALS (2020)

Add to Collection
Review Polymer Science

Automotive applications of thermoplastic vulcanizates

Asit Baran Bhattacharya et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection
Review Engineering, Environmental

Waste tire rubber as low-cost and environmentally-friendly modifier in thermoset polymers - A review

Aleksander Hejna et al.

WASTE MANAGEMENT (2020)

Add to Collection
Review Chemistry, Physical

Devulcanization Technologies for Recycling of Tire-Derived Rubber: A Review

Erich Markl et al.

MATERIALS (2020)

Add to Collection
Article Environmental Sciences

Car Tire Crumb Rubber: Does Leaching Produce a Toxic Chemical Cocktail in Coastal Marine Systems?

Claudia Halsband et al.

FRONTIERS IN ENVIRONMENTAL SCIENCE (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Rubber Recycling: Mending the Interface between Ground Rubber Particles and Virgin Rubber

Yu Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Review Environmental Sciences

Trends in the management of waste tyres and recent experimental approaches in the analysis of polycyclic aromatic hydrocarbons (PAHs) from rubber crumbs

Motshabi Alinah Sibeko et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Add to Collection
Article Chemistry, Physical

Ground Tire Rubber Modified by Ethylene-Vinyl Acetate Copolymer: Processing, Physico-Mechanical Properties, Volatile Organic Compounds Emission and Recycling Possibility

Lukasz Zedler et al.

MATERIALS (2020)

Add to Collection
Review Materials Science, Composites

Recycling Waste Tires into Ground Tire Rubber (GTR)/Rubber Compounds: A Review

Ali Fazli et al.

JOURNAL OF COMPOSITES SCIENCE (2020)

Add to Collection
Article Polymer Science

Mechanical Properties of Rubber Sheets Produced by Direct Molding of Ground Rubber Tire Powder

Mei Shen et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2019)

Add to Collection
Article Engineering, Environmental

Emission analysis of recycled tire rubber modified asphalt in hot and warm mix conditions

Xu Yang et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection
Article Materials Science, Characterization & Testing

Towards understanding the role of peroxide initiators on compatibilization efficiency of thermoplastic elastomers highly filled with reclaimed GTR

Aleksander Hejna et al.

POLYMER TESTING (2019)

Add to Collection
Review Environmental Sciences

Polycyclic aromatic hydrocarbons in consumer goods made from recycled rubber material: A review

Astrid Diekmann et al.

CHEMOSPHERE (2019)

Add to Collection
Article Polymer Science

Thermoplastic vulcanizate nanocomposites based on polyethylene/reclaimed rubber: A correlation between carbon nanotube dispersion state and electrical percolation threshold

Ali Vahidifar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Add to Collection
Article Chemistry, Applied

Chlorinated reclaimed rubber: preparation, structure and performance

Yutian Yao et al.

PIGMENT & RESIN TECHNOLOGY (2019)

Add to Collection
Article Engineering, Environmental

Thermo-mechanical devulcanization and recycling of rubber industry waste

Said Seghar et al.

RESOURCES CONSERVATION AND RECYCLING (2019)

Add to Collection
Article Engineering, Electrical & Electronic

Ground tire rubber composites with hybrid conductive network for efficiency electromagnetic shielding and low reflection

An Sheng et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Add to Collection
Article Polymer Science

Devulcanization of natural rubber compounds by extrusion using thermoplastics and characterization of revulcanized compounds

Rafael Barbosa et al.

JOURNAL OF POLYMER RESEARCH (2019)

Add to Collection
Review Green & Sustainable Science & Technology

Devulcanisation and reclaiming of tires and rubber by physical and chemical processes: A review

Lauris Bockstal et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection
Article Chemistry, Applied

Thermoplastic elastomer based on waste polyethylene/waste rubber containing activated carbon black: Impact of gamma irradiation

E. S. Fathy et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2019)

Add to Collection
Proceedings Paper Green & Sustainable Science & Technology

Zero-waste production: Technology for the in-house recycling of technical elastomers

L. Kroll et al.

SUSTAINABLE MANUFACTURING FOR GLOBAL CIRCULAR ECONOMY (2019)

Add to Collection
Article Materials Science, Composites

Mechanical reinforcement of thermoplastic vulcanizates using ground tyre rubber modified with sulfuric acid

Jose F. Hernandez Gamez et al.

POLYMER COMPOSITES (2018)

Add to Collection
Article Polymer Science

Thermoplastic elastomers based on waste rubber and expanded polystyrene: Role of devulcanization and ionizing radiation

Khaled F. El-Nemr et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2018)

Add to Collection
Article Polymer Science

A Review on Hybrid Fillers in Rubber Composites

Zainathul Akhmar Salim Abdul Salim et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)

Add to Collection
Article Materials Science, Composites

Enhancement of mechanical, thermal and morphological properties of compatibilized graphene reinforced dynamically vulcanized thermoplastic elastomer vulcanizates based on polyethylene and reclaimed rubber

S. M. R. Paran et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection
Article Green & Sustainable Science & Technology

An innovative method in the regeneration of waste rubber and the sustainable development

Dan Dobrota et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection
Article Polymer Science

Effect of styrene butadiene rubber on the light pyrolysis of the natural rubber

Pan Song et al.

POLYMER DEGRADATION AND STABILITY (2018)

Add to Collection
Review Polymer Science

Preparation, microstructure, and microstructure-properties relationship of thermoplastic vulcanizates (TPVs): A review

Nanying Ning et al.

PROGRESS IN POLYMER SCIENCE (2018)

Add to Collection
Article Engineering, Environmental

Investigating the feasibility of a reuse scenario for textile fibres recovered from end-of-life tyres

Daniele Landi et al.

WASTE MANAGEMENT (2018)

Add to Collection
Article Engineering, Environmental

Vegetable derived-oil facilitating carbon black migration from waste tire rubbers and its reinforcement effect

Pan Song et al.

WASTE MANAGEMENT (2018)

Add to Collection
Article Materials Science, Biomaterials

Rotomolding of foamed and unfoamed GTR-LLDPE blends: Mechanical, morphological and physical properties

Yao Dou et al.

CELLULAR POLYMERS (2018)

Add to Collection
Article Engineering, Chemical

Production of Thermoplastic Elastomers Based on Recycled PE and Ground Tire Rubber: Morphology, Mechanical Properties and Effect of Compatibilizer Addition

Y-H Wang et al.

INTERNATIONAL POLYMER PROCESSING (2018)

Add to Collection
Article Materials Science, Composites

Characterization of waste tire rubber devulcanized in twin-screw extruder with thermoplastics

Anderson Thadeu Nunes et al.

PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2018)

Add to Collection
Review Green & Sustainable Science & Technology

Environmentally friendly polymer-rubber composites obtained from waste tyres: A review

Maciej Sienkiewicz et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection
Article Polymer Science

Interfacial interaction between degraded ground tire rubber and polyethylene

Pan Song et al.

POLYMER DEGRADATION AND STABILITY (2017)

Add to Collection
Article Chemistry, Physical

Improved crystallinity and dynamic mechanical properties of reclaimed waste tire rubber/EVA blends under the influence of electron beam irradiation

Suganti Ramarad et al.

RADIATION PHYSICS AND CHEMISTRY (2017)

Add to Collection
Article Chemistry, Applied

Preparation and characterization of a core-shell impact modifier based on (Acrylates and styrene)-grafted ground tire rubber and its poly(vinyl chloride) composites

Xiaowei Fu et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2016)

Add to Collection
Article Polymer Science

Influence of ground tire rubber devulcanization conditions on properties of its thermoplastic vulcanizate blends with copolyester

Boripat Sripornsawat et al.

EUROPEAN POLYMER JOURNAL (2016)

Add to Collection
Article Chemistry, Applied

Thermomechanical reclaiming of ground tire rubber via extrusion at low temperature: Efficiency and limits

Krzysztof Formela et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2016)

Add to Collection
Article Construction & Building Technology

Asphalt modified by thermoplastic elastomer based on recycled rubber

Shifeng Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection
Article Polymer Science

Investigation of volatile low molecular weight compounds formed during continuous reclaiming of ground tire rubber

Michal Gagol et al.

POLYMER DEGRADATION AND STABILITY (2015)

Add to Collection
Article Materials Science, Characterization & Testing

Interfacially modified LDPE/GTR composites with non-polar elastomers: From microstructure to macro-behavior

Krzysztof Formela et al.

POLYMER TESTING (2015)

Add to Collection
Review Materials Science, Multidisciplinary

Waste tire rubber in polymer blends: A review on the evolution, properties and future

S. Ramarad et al.

PROGRESS IN MATERIALS SCIENCE (2015)

Add to Collection
Article Thermodynamics

Determining rubber composition of waste tyres using devolatilisation kinetics

Bart Danon et al.

THERMOCHIMICA ACTA (2015)

Add to Collection
Article Energy & Fuels

Pyrolysis, Combustion, and Steam Gasification of Various Types of Scrap Tires for Energy Recovery

Jayaraman Kandasamy et al.

ENERGY & FUELS (2015)

Add to Collection
Article Materials Science, Multidisciplinary

Use of ground EPDM wastes in EPDM-based rubber compounds: With and without compatibilization

Bagdagul Karaagac et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2015)

Add to Collection
Review Engineering, Environmental

Environmental and Health Impacts of Artificial Turf: A Review

Hefa Cheng et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)

Add to Collection
Article Engineering, Chemical

Effect of Compounding Conditions on Static and Dynamic Mechanical Properties of High Density Polyethylene/Ground Tire Rubber Blends

K. Formela et al.

INTERNATIONAL POLYMER PROCESSING (2014)

Add to Collection
Article Polymer Science

Curing characteristics, mechanical properties and morphology of butyl rubber filled with ground tire rubber (GTR)

Krzysztof Formela et al.

IRANIAN POLYMER JOURNAL (2014)

Add to Collection
Article Polymer Science

Waste Ground Rubber Tire Powder/Thermoplastic Vulcanizate Blends: Preparation, Characterization, and Compatibility

Xun Lu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

Add to Collection
Article Polymer Science

Novel HDPE/ Ground Tyre Rubber Composite Materials Obtained Through In- Situ Polymerization and Polymerization Filling Technique

Roberta Sulcis et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

Add to Collection
Article Polymer Science

Use of response surface methodology in characterization of properties of recycled high density polyethylene/ground tire rubber compositions

Krzysztof Formelem et al.

POLIMERY (2014)

Add to Collection
Article Polymer Science

The influence of materials dosing order and shear forces on the properties of high density polyethylene/ground tire rubber blends obtained in co-rotating twin screw extruder

Krzysztof Formela et al.

POLIMERY (2014)

Add to Collection
Review Polymer Science

Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends

A. Taguet et al.

PROGRESS IN POLYMER SCIENCE (2014)

Add to Collection
Review Construction & Building Technology

Recycled Tyre Rubber Modified Bitumens for road asphalt mixtures: A literature review

Davide Lo Presti

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection
Editorial Material Polymer Science

Waste tyre rubber - what to do next?

J. Karger-Kocsis

EXPRESS POLYMER LETTERS (2013)

Add to Collection
Article Polymer Science

Effects of high shear stress on the devulcanization of ground tire rubber in a twin-screw extruder

Hu Si et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection
Article Polymer Science

Structure and performance of reclaimed rubber obtained by different methods

Jinwei Shi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Mechanochemical devulcanization and gamma irradiation of devulcanized waste rubber/high density polyethylene thermoplastic elastomer

Medhat M. Hassan et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2013)

Add to Collection
Review Materials Science, Multidisciplinary

Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers

J. Karger-Kocsis et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Add to Collection
Article Chemistry, Applied

Morphology and physical properties of composite foams based on low-density polyethylene and ground tire rubber

Dong Tian et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2013)

Add to Collection
Article Polymer Science

Degradation behavior of maleated polyethylene/ground tire rubber thermoplastic elastomers with and without stabilizers

Adel Ramezani Kakroodi et al.

POLYMER DEGRADATION AND STABILITY (2013)

Add to Collection
Review Construction & Building Technology

Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): An overview

F. Pacheco-Torgal et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection
Article Agricultural Engineering

Physical properties of polymer composite: Natural rubber glove waste/polystyrene foam waste/cellulose

Sa-Ad Riyajan et al.

INDUSTRIAL CROPS AND PRODUCTS (2012)

Add to Collection
Article Polymer Science

Application of Chlorinated Waste Rubber as a Flame Retardant of Low Density Polyethylene

Kui-Long Tan et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Add to Collection
Article Polymer Science

Mechanical properties of recycled LDPE/EVA/ground tyre rubber blends: Effects of EVA content and postirradiation

Laszlo Meszaros et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Add to Collection
Article Materials Science, Composites

Production of rubber parts by tyre recycling without using virgin materials

A. Gugliemotti et al.

PLASTICS RUBBER AND COMPOSITES (2012)

Add to Collection
Article Chemistry, Physical

EB-promoted recycling of waste tire rubber with polyolefins

Laszlo Meszaros et al.

RADIATION PHYSICS AND CHEMISTRY (2012)

Add to Collection
Article Polymer Science

Surface Graft Copolymerization of Poly(methyl methacrylate) onto Waste Tire Rubber Powder Through Ozonization

Ping Fan et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

Add to Collection
Article Polymer Science

Enhancement of processability and foamability of ground tire rubber powder and LDPE blends through solid state shear milling

Jian Zhu et al.

JOURNAL OF POLYMER RESEARCH (2011)

Add to Collection
Article Chemistry, Applied

Influence of Compatibilizers and Processing Temperature on Microcellular Injection-Molded Polypropylene/(Waste Tire Powder) Composites

Zhen-Xiu Zhang et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2011)

Add to Collection
Article Polymer Science

Partial Replacement of NR by GTR in Thermoplastic Elastomer Based on LLDPE/NR Through Using Reactive Blending: Its Effects on Morphology, Rheological, and Mechanical Properties

Majid Rezaei Abadchi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

Add to Collection
Article Materials Science, Multidisciplinary

Prediction of mechanical properties of waste polypropylene/waste ground rubber tire powder blends using artificial neural networks

Shu Ling Zhang et al.

MATERIALS & DESIGN (2010)

Add to Collection
Article Polymer Science

Effect of the Particle Size and Acid Pretreatments on Compatibility and Properties of Recycled HDPE Plastic Bottles Filled with Ground Tyre Powder

X. Colom et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Add to Collection
Article Engineering, Chemical

Dynamic Reaction Involving Surface Modified Waste Ground Rubber Tire Powder/Polypropylene

Sung Hyo Lee et al.

POLYMER ENGINEERING AND SCIENCE (2009)

Add to Collection
Article Materials Science, Characterization & Testing

Preparation and characterization of thermoplastic elastomer of poly(vinyl chloride) and chlorinated waste rubber

Kuilong Tan et al.

POLYMER TESTING (2009)

Add to Collection
Article Engineering, Environmental

Using information of the separation process of recycling scrap tires for process modelling

A. Pehlken et al.

RESOURCES CONSERVATION AND RECYCLING (2009)

Add to Collection
Proceedings Paper Engineering, Environmental

Recycling of vulcanized waste rubber through halogenations and amination chemical reactions

Y. A. Aggour et al.

SUSTAINABLE DEVELOPMENT AND PLANNING IV, VOLS 1 AND 2 (2009)

Add to Collection
Article Environmental Sciences

Studies on potential emission of hazardous gases due to uncontrolled open-air burning of waste vehicle tyres and their possible impacts on the environment

Pawan R. Shakya et al.

ATMOSPHERIC ENVIRONMENT (2008)

Add to Collection
Article Materials Science, Characterization & Testing

Compatibilizing thermoplastic/ground tyre rubber powder blends: Efficiency and limits

R. Sonnier et al.

POLYMER TESTING (2008)

Add to Collection
Review Polymer Science

RUBBER ABRASION AND TIRE WEAR

K. A. Grosch

RUBBER CHEMISTRY AND TECHNOLOGY (2008)

Add to Collection
Article Polymer Science

Study of thermal degradation kinetics of elastomeric powder (ground tire rubber)

A. Nadal Gisbert et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2008)

Add to Collection
Article Polymer Science

Dynamic reaction inside co-rotating twin screw extruder. I. Truck tire model material/polypropylene blends

Sung Hyo Lee et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

Add to Collection
Article Polymer Science

Dynamic reaction inside co-rotating twin screw extruder. II. Waste ground rubber tire powder/polypropylene blends

Sung Hyo Lee et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

Add to Collection
Article Materials Science, Composites

Ground rubber/acrylonitrile-butadiene-styrene composites

Dong Yang Wu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

Add to Collection
Article Environmental Sciences

Toxic components leaching from tire rubber

A. Wik

BULLETIN OF ENVIRONMENTAL CONTAMINATION AND TOXICOLOGY (2007)

Add to Collection
Article Polymer Science

Modification of rubber powder with peroxide and properties of polypropylene/rubber composites

A. M. Shanmugharaj et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

Add to Collection
Article Materials Science, Characterization & Testing

Polyethylene/ground tyre rubber blends: Influence of particle morphology and oxidation on mechanical properties

R. Sonnier et al.

POLYMER TESTING (2007)

Add to Collection
Article Polymer Science

Effects of extruder parameters and compositions on mechanical properties and morphology of maleic anhydride grafted polypropylene/waste tire blends

Jin Kuk. Kim et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2007)

Add to Collection
Article Green & Sustainable Science & Technology

Is European end-of-life vehicle legislation living up to expectations? Assessing the impact of the ELV Directive on 'green' innovation and vehicle recovery

Jason Gerrard et al.

JOURNAL OF CLEANER PRODUCTION (2007)

Add to Collection
Article Engineering, Manufacturing

Composites reinforced with reused tyres: Surface oxidant treatment to improve the interfacial compatibility

X. Colom et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

Add to Collection
Article Polymer Science

Gradient density grafted polymers on ground tire rubber particles by atom transfer radical polymerization

Serena Coiai et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2006)

Add to Collection
Article Polymer Science

Dynamic vulcanization of reclaimed tire rubber and high density polyethylene blends

Panu Punnarak et al.

POLYMER DEGRADATION AND STABILITY (2006)

Add to Collection
Article Polymer Science

Structural and mechanical studies on modified reused tyres composites

X. Colom et al.

EUROPEAN POLYMER JOURNAL (2006)

Add to Collection
Article Polymer Science

Formulation, characterization and optimization of the processing condition of blends of recycled polyethylene and ground tyre rubber: Mechanical and rheological analysis

R Scaffaro et al.

POLYMER DEGRADATION AND STABILITY (2005)

Add to Collection
Review Polymer Science

Role of compatibilization in recycling rubber waste by blending with plastics

D Mangaraj

RUBBER CHEMISTRY AND TECHNOLOGY (2005)

Add to Collection
Article Materials Science, Characterization & Testing

Morphology and mechanical properties of HDPE/SRP/elastomer composites: effect of elastomer polarity

Y Li et al.

POLYMER TESTING (2004)

Add to Collection
Review Polymer Science

Thermoplastic elastomers based on waste rubber and plastics

RS Rajeev et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2004)

Add to Collection
Article Engineering, Environmental

Studies of the thermal degradation of waste rubber

FZ Chen et al.

WASTE MANAGEMENT (2003)

Add to Collection
Article Polymer Science

A novel method to recycle scrap tires: High-pressure high-temperature sintering

JE Morin et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2002)

Add to Collection
Article Polymer Science

Influence of compatibilizers on mechanical properties, crystallization, and morphology of polypropylene/scrap rubber dust blends

P Phinyocheep et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Add to Collection
Article Polymer Science

Effect of chlorination of ground rubber tire on its compatibility with poly(vinyl chloride): Dielectric studies

AK Naskar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Add to Collection
Article Polymer Science

Melt-processable rubber: Chlorinated waste tire rubber-filled polyvinyl chloride

AK Naskar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Add to Collection
Article Polymer Science

Thermoplastic elastomeric composition based on maleic anhydride-grafted ground rubber tire

AK Naskar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Add to Collection
Article Polymer Science

Thermoplastic elastomers from reclaimed rubber and waste plastics

P Nevatia et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Add to Collection
Article Polymer Science

Thermoplastic elastomers manufactured of polymer blends

WM Rzymski et al.

POLIMERY (2002)

Add to Collection
Article Polymer Science

Surface chlorination of ground rubber tire and its characterization

AK Naskar et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2001)

Add to Collection
Review Polymer Science

Fundamentals of rolling resistance

DE Hall et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2001)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.