☆ 4.6 Article

In situ observation of the electrochemical behavior of Li-CO2/O2 batteries in an environmental transmission electron microscope

CARBON ENERGY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

Achieving high-capacity and long-life K+ storage enabled by constructing yolk-shell Sb2S3@N, S-doped carbon nanorod anodes

Bensheng Xiao et al.

Summary: This study proposes a yolk-shell structured Sb2S3 confined in N, S co-doped hollow carbon nanorod as a promising anode for potassium-ion batteries. The structure effectively addresses the challenges of volume expansion and sluggish kinetics, resulting in outstanding cycling performance and rate capability. The mechanism of performance enhancement and K+ storage of Sb2S3 is elucidated through in situ/ex situ microscopic and spectroscopic characterizations.

JOURNAL OF ENERGY CHEMISTRY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Realizing Stable Carbonate Electrolytes in Li-O2/CO2 Batteries†

Kai Chen et al.

Summary: In this study, a commercial carbonate electrolyte was proven to be suitable for Li-O-2/CO2 batteries. The electrolyte captured superoxide and reacted with CO2 to form less aggressive intermediates, stabilizing the carbonate electrolyte and avoiding decomposition induced by reactive oxygen species. Additionally, the carbonate electrolyte greatly improved the reversibility of Li metal plating/stripping, enabling the possibility of using ultra-thin Li anode.

CHINESE JOURNAL OF CHEMISTRY (2023)

Add to Collection

Article Chemistry, Physical

The influence of current density dependent Li2CO3 properties on the discharge and charge reactions of Li-CO2/O2 battery

Linfeng Peng et al.

Summary: As a promising energy storage technology, Li-CO2/O2 batteries can deliver ultrahigh discharge capacity and convert CO2 into renewable energy. This study explores the influence of current density on the characteristics of Li2CO3, finding that Li2CO3 with poor crystallinity and elliptical disk morphology can be obtained at medium current density, leading to excellent electrochemical performance.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2023)

Add to Collection

Article Chemistry, Physical

First Application of Nitrogen-Doped Carbon Nanosheets Derived from Lotus Leaves as the Electrode Catalyst for Li-CO2/O2 Battery

Lu Zou et al.

Summary: The development of Li-CO2/O-2 battery with high energy density and long-term stability is urgently needed. The biomass-derived heteroatom-doped carbon catalyst shows promise as a cathode catalyst. Nitrogen-doped carbon nanosheets (N-CNs) prepared from lotus leaves demonstrate improved electrochemical catalytic activity in Li-CO2/O-2 battery.

CATALYSTS (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Pt Nanoparticles Confined in a 3D Porous FeNC Matrix as Efficient Catalysts for Rechargeable Li-CO2/O2 Batteries

Peng-Fang Zhang et al.

Summary: The use of Pt/FeNC as a cathodic catalyst can lower the decomposition potential of Li2CO3 and improve the performance of rechargeable Li-CO2/O2 batteries.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Cycle-stable Si-based composite anode for lithium-ion batteries enabled by the synergetic combination of mixed lithium phosphates and void-preserving F-doped carbon

Zhefei Sun et al.

Summary: Researchers have developed a dual core-shell structured Si-based nanocomposite for lithium-ion batteries. The composite consists of a Si nanoparticle core, a Li3PO4/Li4P2O7 shell, and a void-preserving F-doped carbon shell, which improves the cycling stability and performance of the anode. The composite shows a reversible capacity of 569 mAh/g after 500 cycles and a good cycling performance in full cell assembly.

MATERIALS TODAY NANO (2023)

Add to Collection

Article Chemistry, Physical

Double spatial confinement on ruthenium nanoparticles inside carbon frameworks as durable catalysts for a quasi-solid-state Li-O-2 battery

Meiling Wang et al.

Summary: The rational design of metal nanoparticles (NPs) with large-area exposure, nonagglomeration, and long-range dispersion is crucial for developing energy storage and conversion systems. This study proposes a strategy using double spatial confinement to achieve a highly dispersed ultrafine ruthenium (Ru) NP. The resulting porous carbon matrix with highly dispersed ultrafine Ru NPs demonstrates excellent electrocatalytic performance as a cathode catalyst for a quasi-solid-state Li-O-2 battery, with high discharge areal capacity, high-rate capability, and stable cycling.

CARBON ENERGY (2023)

Add to Collection

Review Chemistry, Physical

Recent advances in solid-state metal-air batteries

Qi Sun et al.

Summary: Solid-state metal-air batteries have attracted significant attention due to their high energy density and safety, with the potential to eliminate side reactions and leakage issues associated with liquid electrolytes. However, challenges such as high resistance at the metal/electrolyte interface and catalyst design remain to be addressed.

CARBON ENERGY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Boosting Cycling Stability and Rate Capability of Li-CO2 Batteries via Synergistic Photoelectric Effect and Plasmonic Interaction

Kun Zhang et al.

Summary: In this study, a silver nanoparticle-decorated titanium dioxide nanotube array cathode was designed to introduce synergistic photoelectric effect and plasmonic interaction, which accelerated the CO2 reduction/evolution reactions. The resulting Li-CO2 battery showed promising performance in terms of low charge voltage, cycling stability, and high rate capability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Engineering, Environmental

Interfacial engineering in hollow NiS2/FeS2-NSGA heterostructures with efficient catalytic activity for advanced Li-CO2 battery

Yachao Jin et al.

Summary: By strategically constructing heterointerfaces, optimizing cathode catalyst mechanisms, and promoting various transports with a porous structure, we have successfully developed a novel cathode catalyst NiS2/FeS2-NSGA that significantly improves the performance of Li-CO2 batteries. This innovation provides an effective approach to enhance the Li2CO3 decomposition rate, opening up new possibilities for further advancements in Li-CO2 battery technology.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Multidisciplinary Sciences

Boosting the potassium-ion storage performance enabled by engineering of hierarchical MoSSe nanosheets modified with carbon on porous carbon sphere

Mengting Cai et al.

Summary: This study reports a hierarchically structured superior anode material that significantly enhances the performance of potassium-ion batteries. The anode, consisting of assembled MoSSe nanosheets anchored on a porous carbon sphere and encapsulated within a thin carbon layer, exhibits high reversible capacity, good rate capability, and superior cyclic performance due to expanded interlayer spacing, abundant anion vacancies, and the protective and conductive properties of the carbon layers.

SCIENCE BULLETIN (2022)

Add to Collection

Article Chemistry, Physical

In-situ imaging the electrochemical reactions of Li-CO2 nanobatteries at high temperatures in an aberration corrected environmental transmission electron microscope

Peng Jia et al.

Summary: This study utilized in-situ environmental transmission electron microscopy (ETEM) to investigate the electrochemistry of Li2CO3 in Li-CO2 batteries. It was found that the synergistic effect of high temperature and biasing facilitates the decomposition of Li2CO3, improving the charging process performance.

NANO RESEARCH (2022)

Add to Collection

Review Chemistry, Physical

A review of lithium-O2/CO2 and lithium-CO2 batteries: Advanced electrodes/materials/electrolytes and functional mechanisms

Raphael Ejikeme Ezeigwe et al.

Summary: This paper comprehensively reviews the state-of-the-art development in key materials, components, and device assembling of lithium-CO2 batteries, along with functional and degradation mechanisms and mitigation strategies. Furthermore, the existing challenges and future research directions for the development of practical lithium-CO2 batteries are discussed.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

All-Solid-State Photo-Assisted Li-CO2 Battery Working at an Ultra-Wide Operation Temperature

De-Hui Guan et al.

Summary: A new photoassisted all-solid-state Li-CO2 battery has been developed to improve stability and achieve higher round-trip efficiency and lower polarization compared to traditional liquid electrolyte systems. The battery features good heat transfer and ion transport capabilities, as well as self-heating properties in low-temperature environments.

ACS NANO (2022)

Add to Collection

Article Energy & Fuels

In situ transmission electron microscopy for understanding materials and interfaces challenges in all-solid-state lithium batteries

Zhefei Sun et al.

Summary: All-solid-state lithium batteries (ASSLBs) using solid electrolytes have been identified as promising alternatives to conventional organic liquid electrolyte-dominated lithium-ion batteries (LIBs). In situ transmission electron microscopy (TEM) technique offers exceptional opportunities for understanding and directly tracking the dynamic processes of electrochemical reactions in ASSLBs. This review summarizes the latest significant advances in the utilization of in situ TEM for a fundamental understanding of the materials and interface challenges in ASSLBs and highlights the invaluable real-time information and scientific findings enabled by this technique.

ETRANSPORTATION (2022)

Add to Collection

Article Engineering, Environmental

Li-CO2/O2 battery operating at ultra-low overpotential and low O2 content on Pt/CNT catalyst

Peng-Fang Zhang et al.

Summary: Li-CO2/O-2 battery is a promising solution for combining CO2 utilization and electrochemical energy storage. The study found that the Li-CO2/O-2 battery with Pt/CNT catalysts exhibited the best performance with minimum overpotential and good cycling stability when operated with 2% O-2 content. The complete decomposition mechanism of Li2CO3 in the battery and the localized growth mechanism within the catalyst layer were also investigated.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Physical

Progress and challenges of prelithiation technology for lithium-ion battery

Zhenyu Huang et al.

Summary: Prelithiation technology is considered a feasible approach to improve the energy density and cycle life of lithium-ion batteries. Different prelithiation methods have been developed and tested, but a definitive development roadmap is still lacking. This review discusses the theoretical influence of prelithiation on electrochemical performance and compares the advantages and disadvantages of different methods in battery manufacturing stages. Challenges and future trends of prelithiation are also discussed.

CARBON ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Revealing the illumination effect on the discharge products in high-performance Li-O2 batteries with heterostructured photocatalysts

Hao Gong et al.

Summary: This study demonstrates the use of hetero-structured MoS2/ZnIn2S4 nanosheets to capture visible light and utilize the generated charge carriers for promoting the oxygen reduction and evolution reactions in lithium-oxygen batteries. The involvement of photoelectrons is found to significantly impact the growth and formation of Li2O2 films in the battery.

CARBON ENERGY (2022)

Add to Collection

Article Electrochemistry

A Modeling Study of the Cycling Behavior of Non-Aqueous Li-O2/CO2 Batteries

Yuanhui Wang et al.

Summary: The presence of CO2 in Li-O-2/CO2 batteries can increase discharge voltage and capacity, while the increase of CO2 diffusivity is beneficial to battery capacity. Accumulation of Li2CO3 during cycling significantly impacts the capacity decay of the battery.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Ti3C2Tx MXene/Carbon Nanotubes for Low Overpotential and Long-Life Li-CO2 Batteries

Zhe Hu et al.

Summary: The research focuses on improving CO2 conversion efficiency through synthesizing a Ti3C2Tx MXene/carbon heterostructure with parallel-aligned tubular architecture, which not only inherits the high catalytic performance of Ti3C2Tx MXene but also enhances the stability of carbon material, promoting CO2 adsorption and lithium carbonate decomposition. The tubular architecture, with a large surface area, provides a long cycle life and ensures good contacts among gas, electrolyte, and electrode.

ACS NANO (2021)

Add to Collection

Article Chemistry, Physical

Boosting Li-CO2 battery performances by engineering oxygen vacancy on NiO nanosheets array

Chunzhi Wang et al.

Summary: The development of low-cost and highly active electrocatalysts for Li-CO2 batteries is crucial for energy storage applications and the utilization of CO2. By introducing oxygen vacancies into NiO nanosheets, this study optimized the adsorbability of carbonaceous species and improved the electrochemical performance of the cathodebased Li-CO2 battery, showing promise for economic and efficient electrocatalysts.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Electron structure and reaction pathway regulation on porous cobalt-doped CeO2/graphene aerogel: A free-standing cathode for flexible and advanced Li-CO2 batteries

Qinghua Deng et al.

Summary: A porous self-supporting cathode for Li-CO2 battery was fabricated, achieving superior discharge capacity and competitive cycling stability. Improvement in conductivity, CO2 adsorption ability, and electrochemical reaction pathway were revealed by density functional theory calculations.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

A highly stable and flexible zeolite electrolyte solid-state Li-air battery

Xiwen Chi et al.

Summary: Solid-state lithium-air batteries with integrated ultrathin, high-ion-conductive zeolite X membrane as the sole solid electrolyte exhibit excellent electrochemical performance, flexibility, and stability. These batteries have a high capacity and cycle life, outperforming batteries based on other materials under the same conditions, and show potential for practical applicability in various energy-storage systems.

NATURE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ Measurements of the Mechanical Properties of Electrochemically Deposited Li2CO3 and Li2O Nanorods

Hongjun Ye et al.

Summary: The solid-electrolyte interface (SEI) is a crucial but poorly understood component in rechargeable Li-ion batteries. Recent research has utilized various techniques to evaluate the mechanical properties of SEI materials, providing new insights into their importance and mechanical behavior.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Super-assembled atomic Ir catalysts on Te substrates with synergistic catalytic capability for Li-CO2 batteries

Yanjie Zhai et al.

Summary: The research demonstrates that using a p-type substrate as an adsorption/desorption promoter can significantly enhance the catalytic capability of cathode catalyst in LCBs and provide a refined reaction pathway.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Atomic-scale structural evolution of electrode materials in Li-ion batteries: a review

Yi-Ru Ji et al.

RARE METALS (2020)

Add to Collection

Article Chemistry, Physical

Synergetic Effect of Ru and NiO in the Electrocatalytic Decomposition of Li2CO3 to Enhance the Performance of a Li-CO2/O2 Battery

Peng-Fang Zhang et al.

ACS CATALYSIS (2020)

Add to Collection

Article Chemistry, Physical

Lithium ion storage mechanism exploration of copper selenite as anode materials for lithium-ion batteries

Jeong Hoo Hong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In situ imaging electrocatalytic CO2 reduction and evolution reactions in all-solid-state Li-CO2 nanobatteries

Tingting Yang et al.

NANOSCALE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Template Preparation of Copper-Based Chalcogenides and their Electrochemical Performance for Li-ion Batteries

Yanfen Chen et al.

CHEMISTRYSELECT (2020)

Add to Collection

Article Chemistry, Physical

Porous Carbon Cathode Assisted with Ionogel Binder Fabricated from Supercritical Fluid Technique toward Li-O2/CO2 Battery Application

Nattanai Kunanusont et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

High-Capacity and Long-Cycle Lifetime Li-CO2/O2 Battery Based on Dandelion-like NiCo2O4 Hollow Microspheres

Lu Zou et al.

CHEMCATCHEM (2019)

Add to Collection

Article Chemistry, Physical

Realizing Interfacial Electronic Interaction within ZnS Quantum Dots/N-rGO Heterostructures for Efficient Li-CO2 Batteries

Hui Wang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Targeted Synergy between Adjacent Co Atoms on Graphene Oxide as an Efficient New Electrocatalyst for Li-CO2 Batteries

Bin-Wei Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Safety-reinforced rechargeable Li-CO2 battery based on a composite solid state electrolyte

Rui Wang et al.

NANO RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Covalent-Organic-Framework-Based Li-CO2 Batteries

Xing Li et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Electrochemistry

Porous NiO nanofibers as an efficient electrocatalyst towards long cycling life rechargeable Li-CO2 batteries

Suya Lu et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Engineering, Environmental

High-performance rechargeable Li-CO2/O2 battery with Ru/N-doped CNT catalyst

Peng-Fang Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Probing Lithium Carbonate Formation in Trace-O2-Assisted Aprotic Li-CO2 Batteries Using in Situ Surface-Enhanced Raman Spectroscopy

Zhiwei Zhao et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Highly Reversible Long-Life Li-CO2 Battery with a RuP2-Based Catalytic Cathode

Ziyang Guo et al.

SMALL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Monodispersed MnO nanoparticles in graphene-an interconnected N-doped 3D carbon framework as a highly efficient gas cathode in Li-CO2 batteries

Siwu Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fabricating Ir/C Nanofiber Networks as Free-Standing Air Cathodes for Rechargeable Li-CO2 Batteries

Chengyi Wang et al.

SMALL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Li-Air Battery with Ultralong Cycle Life in Ambient Air

Lie Wang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Monodispersed Ru Nanoparticles Functionalized Graphene Nanosheets as Efficient Cathode Catalysts for O2-Assisted Li-CO2 Battery

Liangjun Wang et al.

ACS OMEGA (2017)

Add to Collection

Article Chemistry, Multidisciplinary

A Rechargeable Li-CO2 Battery with a Gel Polymer Electrolyte

Chao Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Mo2C/CNT: An Efficient Catalyst for Rechargeable Li-CO2 Batteries

Yuyang Hou et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

CuSe1-xSx nanosheets with an ordered superstructure as anode materials for lithium-ion batteries

Chunshuang Yan et al.

NEW JOURNAL OF CHEMISTRY (2016)

Add to Collection

Review Chemistry, Multidisciplinary

A review of cathode materials and structures for rechargeable lithium-air batteries

Zhong Ma et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Rechargeable Li/CO2-O2 (2:1) battery and Li/CO2 battery

Yali Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

The Li-CO2 battery: a novel method for CO2 capture and utilization

Shaomao Xu et al.

RSC ADVANCES (2013)

Add to Collection

Article Chemistry, Multidisciplinary

A Li-O-2/CO2 battery

Kensuke Takechi et al.

CHEMICAL COMMUNICATIONS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.