☆ 4.0 Article

Optimization of Selective Laser Sintering Three-Dimensional Printing of Thermoplastic Polyurethane Elastomer: A Statistical Approach

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Optimizing 3D Printing Process Parameters for the Tensile Strength of Thermoplastic Polyurethane Plastic

Duong Le et al.

Summary: This study examines the mechanical characteristics of thermoplastic polyurethane (TPU) polymer by testing parameters such as temperature, infill angle, infill density, and layer thickness. The Taguchi method is used to design, analyze, and optimize the mechanical properties. The study provides optimal parameter combinations for achieving maximum tensile strength, elastic modulus, and elongation at break value.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

Add to Collection

Review Polymer Science

Thermoplastic polyurethane for three-dimensional printing applications: A review

Shubham M. Desai et al.

Summary: Additive manufacturing, particularly 3D printing, offers the advantage of customized designing with less wastage and fast prototyping. Thermoplastic polyurethane (TPU) is a versatile material with unique mechanical, thermal, and chemical properties, which has gained increasing attention in 3D printing applications. This review paper provides an overview of the state-of-the-art in TPU-based 3D printing, including its characteristics, processing techniques, and applications.

POLYMERS FOR ADVANCED TECHNOLOGIES (2023)

Add to Collection

Article Materials Science, Composites

Sintering quality and parameters optimization of sisal fiber/PES composite fabricated by selective laser sintering (SLS)

Aboubaker I. B. Idriss et al.

Summary: This article aims to improve the sintering quality of the sisal fiber/poly-(ether sulfone) (PES) composite (SFPC) part fabricated via selective laser sintering (SLS). The influence factors on the quality of the sintered part were studied and analyzed. The results showed that the quality of SFPC part was significantly enhanced when the optimum parameters were applied in SLS process. This article provided important reference value for the choice of the process parameters of the biomass composite.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

Fatigue life optimization for 17-4Ph steel produced by selective laser melting

Jean-marc Linares et al.

Summary: This paper proposes a methodology to control the fatigue life of 17-4Ph stainless steel by selecting the most relevant manufacturing parameters. The results show that the fatigue limit of the specimens manufactured by SLM has reached near 90% of the value found in samples machined from a bar, and provides an increase of 18% to the fatigue limit compared to other research works.

RAPID PROTOTYPING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-Response Optimization of Surface Grinding Process Parameters of AISI 4140 Alloy Steel Using Response Surface Methodology and Desirability Function under Dry and Wet Conditions

Rakesh Roy et al.

Summary: This study experimentally investigated the effect of four controllable input parameters on the surface grinding process of AISI 4140 steel. The process was optimized using a combined approach based on response surface methodology (RSM) and desirability functional approach (DFA). The results showed that the optimal values of the input parameters for wet conditions were determined, and there was a small deviation between the predicted and experimental values of the optimized parameters.

COATINGS (2022)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Tool path optimization of selective laser sintering processes using deep learning

D. H. Kim et al.

Summary: Advancements in additive manufacturing have allowed researchers to create new materials surpassing individual properties, with selective laser sintering being a popular and fast technique for intricate structures.

COMPUTATIONAL MECHANICS (2022)

Add to Collection

Article Biotechnology & Applied Microbiology

Surface Roughness and Biocompatibility of Polycaprolactone Bone Scaffolds: An Energy-Density-Guided Parameter Optimization for Selective Laser Sintering

Jian Han et al.

Summary: This study investigates the relationship between surface roughness and biocompatibility of PCL bone scaffolds prepared by selective laser sintering. The results show that high energy density leads to changes in scaffold shape and poor surface smoothness, while low energy density promotes cell attachment and proliferation.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Magnetic-field-assisted DLP stereolithography for controlled production of highly aligned 3D printed polymer-Fe3O4@graphene nanocomposites

Hammad Younes et al.

Summary: This paper demonstrates the printing of nanocomposites using the DLP method with aligned magnetic Fe3O4@graphene fillers, showing significant improvement in mechanical properties. The results indicate that 0 alignment provides better mechanical properties compared to 90 alignment for filler concentrations of 0.4, 0.8, and 1.6 wt.%.

MATERIALS RESEARCH BULLETIN (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microscopic morphology, thermodynamic and mechanical properties of thermoplastic polyurethane fabricated by selective laser sintering

Ruiqi Pan et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Review Construction & Building Technology

Additive Manufacturing Applications for Industry 4.0: A Systematic Critical Review

Samad M. E. Sepasgozar et al.

BUILDINGS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation and laser sintering of a thermoplastic polyurethane carbon nanotube composite-based pressure sensor

Yu Zhuang et al.

RSC ADVANCES (2020)

Add to Collection

Article Optics

Optimizing selective laser sintering process by grey relational analysis and soft computing techniques

Hamed Sohrabpoor et al.

OPTIK (2018)

Add to Collection

Article Business

The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing

Mohsen Attaran

BUSINESS HORIZONS (2017)

Add to Collection

Article Engineering, Industrial

Materials for additive manufacturing

David Bourell et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Automation & Control Systems

Additive manufacturing methods and modelling approaches: a critical review

H. Bikas et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Engineering, Mechanical

Study on shrinkage behaviour of laser sintered PA 3200GF specimens using RSM and ANN

Sushant Negi et al.

RAPID PROTOTYPING JOURNAL (2016)

Add to Collection

Article Engineering, Multidisciplinary

Determining the effect of sintering conditions on mechanical properties of laser sintered glass filled polyamide parts using RSM

Sushant Negi et al.

MEASUREMENT (2015)

Add to Collection

Article Engineering, Manufacturing

Influence of sintering parameters on dynamic mechanical properties of selective laser sintered parts

Vishal S. Sharma et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)

Add to Collection

Article Multidisciplinary Sciences

Investigating the Surface Roughness of SLS Fabricated Glass-Filled Polyamide Parts Using Response Surface Methodology

Sushant Negi et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2014)

Add to Collection

Article Automation & Control Systems

Investigating surface roughness of parts produced by SLS process

Anish Sachdeva et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

Add to Collection

Article Automation & Control Systems

Influence of process parameters on surface roughness of aluminum parts produced by DMLS

F. Calignano et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

Add to Collection

Review Chemistry, Analytical

Response surface methodology (RSM) as a tool for optimization in analytical chemistry

Marcos Almeida Bezerra et al.

TALANTA (2008)

Add to Collection

Article Automation & Control Systems

The application of Taguchi's method in the experimental investigation of the laser sintering process

S. Dingal et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)

Add to Collection

Article Chemistry, Physical

Parametric analysis of the selective laser melting process

I. Yadroitsev et al.

APPLIED SURFACE SCIENCE (2007)

Add to Collection

Article Engineering, Manufacturing

Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sintering

N. Raghunath et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)

Add to Collection

Article Engineering, Mechanical

Binding mechanisms in selective laser sintering and selective laser melting

JP Kruth et al.

RAPID PROTOTYPING JOURNAL (2005)

Add to Collection

Article Automation & Control Systems

Lasers and materials in selective laser sintering

JP Kruth et al.

ASSEMBLY AUTOMATION (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.