☆ 3.8 Article

Synergistic effects of 2, 4 dihydroxybenzaldehyde and carbon black nanoparticles on the properties of natural rubber

EMERGENT MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

High-performance multi-response optimization of new nanocomposite coating formulation of zinc reinforced with calcium oxide nanoparticle synthesis from oyster shell via one-step electrodeposition approach

Sani Mohammed Adams et al.

Summary: The synthesis of new nanocomposite coatings of zinc reinforced with calcium oxide nanoparticles (CaOnp) from oyster shells was studied under different electrodeposition parameters. The calcium oxide nanoparticles (CaOnp) concentration, current density, deposition temperature, and deposition time were varied, while electrical conductivity, hardness values, and corrosion rate were measured. The experimental results were in good agreement with the model predictions. The optimized conditions for the deposition process were found to be 10g/l CaOnp, 80 degrees C deposition temperature, 1.5A/cm(2) current density, and 15 minutes deposition time. The smaller crystallite size of the deposited sample resulted in lower corrosion resistance and higher hardness values. It was concluded that waste oyster shells can be effectively used for enhancing the corrosion resistance and hardness values of mild steel through electrodeposition.

EMERGENT MATERIALS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Graphene oxide/chitosan doped polysulfone membrane for the treatment of industrial wastewater

Ahmed T. Yasir et al.

Summary: Rapid urbanization and industrialization pose significant stress on fresh water sources, with discharge of industrial wastewater posing risks to public health and the environment. In this study, chitosan-functionalized graphene oxide (GO-CH) was incorporated into polysulfone (Psf) ultrafiltration membranes, resulting in improved membrane performance. The GO-CH/Psf membrane showed higher water flux, BSA rejection rate, and water flux recovery ratio, and lower BSA solution flux attenuation rate than pristine Psf membrane. Further testing with real industrial wastewater showed a 28% improvement in COD removal.

EMERGENT MATERIALS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Green carbon-based nanocomposite biomaterials through the lens of microscopes

Navid Rabiee et al.

Summary: A green synthesis method was used to develop carbon-based nanocomposites with ZnO nanoparticles, demonstrating interactions with DOX and cellular internalization. Drug-nanocomposite interactions, surface morphology, and cell viability are crucial factors for drug uptake.

EMERGENT MATERIALS (2022)

Add to Collection

Article Materials Science, Textiles

Mechanical, Thermal and Solvent Transport Properties of Glutaraldehyde Cured Natural Rubber/Cotton Fabric Composites

Thanuj M. Kumar et al.

Summary: This study prepared composites of cotton fabric reinforced cured natural rubber as matrix material using glutaraldehyde as a curing agent. The cured composites showed excellent mechanical, thermal, physical, and solvent resistance properties, and the addition of cotton fabric significantly enhanced the stability and tensile strength of the natural rubber matrix.

FIBERS AND POLYMERS (2022)

Add to Collection

Article Materials Science, Composites

Enhancement of damping response in polymers and composites by the addition of graphene nanoplatelets

Ch. V. Katsiropoulos et al.

Summary: The addition of graphene nanoplatelets has a significant effect on the damping characteristics of carbon fiber/polymer composites, with different concentrations yielding different results.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Polymer Science

Influence of sizes of rubber particles in latex on mechanical properties of natural rubber filled with carbon black

Simin He et al.

Summary: The structures and properties of natural rubber obtained from small and large rubber particles in latex are different. This study investigates the properties of natural rubber/carbon black composites with different mass ratios of small and large rubber particles. The results show that the mechanical properties of the composites increase with the increase of large rubber particle content due to the presence of agglomerates in composites with small rubber particles.

POLYMER (2022)

Add to Collection

Article Polymer Science

Mechanical, thermal and optical properties of natural rubber films with different types of bifunctional aldehydes as curing agents

Rawiporn Promsung et al.

Summary: A new simple system for vulcanizing natural rubber latex at low temperature using different bifunctional aldehydes has been proposed. The study investigated the mechanical, thermal, and optical properties of the crosslinked rubber. The results showed that glutaraldehyde-cured rubber exhibited superior mechanical properties and phthaldialdehyde-cured rubber had higher transparency, making it suitable for developing sensor materials.

EXPRESS POLYMER LETTERS (2022)

Add to Collection

Review Polymer Science

Nature of Carbon Black Reinforcement of Rubber: Perspective on the Original Polymer Nanocomposite

Christopher G. Robertson et al.

Summary: The addition of carbon black particles to elastomeric polymers is crucial for the successful industrial use of rubber in many applications, but the origin of stiffness enhancement in elastomers from incorporating nanometer-scale carbon black particles is still debated. Experimental findings suggest that heat treatment of carbon black can significantly reduce the filler reinforcement effect in rubber. Furthermore, various chemical modification approaches have been employed to improve polymer-filler interactions and reinforcement.

POLYMERS (2021)

Add to Collection

Article Engineering, Chemical

Notably Improved Dispersion of Carbon Black for High-Performance Natural Rubber Composites via Triazolinedione Click Chemistry

Shifeng Fang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Article Polymer Science

Double-Network Formation and Mechanical Enhancement of Reducing End-Modified Cellulose Nanocrystals to the Thermoplastic Elastomer Based on Click Reaction and Bulk Cross-Linking

Han Tao et al.

MACROMOLECULES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Organic Thin Paper of Cellulose Nanofiber/Polyaniline Doped with (±)-10-Camphorsulfonic Acid Nanohybrid and Its Application to Electromagnetic Shielding

Taku Omura et al.

ACS OMEGA (2019)

Add to Collection

Article Chemistry, Applied

Mechanical and thermal properties of carbon black reinforced natural rubber/polyvinyl alcohol fully-interpenetrating polymer networks

Shiva Rao et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2018)

Add to Collection

Review Polymer Science

Sustainable rubbers and rubber additives

Preetom Sarkar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Add to Collection

Article Materials Science, Composites

Graphene/carbon black/natural rubber composites prepared by a wet compounding and latex mixing process

Jian Wang et al.

PLASTICS RUBBER AND COMPOSITES (2018)

Add to Collection

Article Polymer Science

Optimization study of ammonia and glutaraldehyde contents on vulcanization of natural rubber latex

Anish Johns et al.

IRANIAN POLYMER JOURNAL (2015)

Add to Collection

Article Polymer Science

Study on properties of natural rubber reinforced by poly(sodium-4-styrenesulfonate)-decorated carbon black with a latex compounding technique

Shenbo Jin et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Spectroscopic and quantum chemical analysis of a natural product - Hayatin hydrochloride

Rashmi Mishra et al.

JOURNAL OF MOLECULAR STRUCTURE (2015)

Add to Collection

Article Polymer Science

Effect of Various Efficient Vulcanization Cure Systems on the Compression Set of a Nitrile Rubber Filled with Different Fillers

Saeed Ostad Movahed et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of fly ash on thermal stability, flammability, oil resistance and transport properties of chlorinated styrene butadiene rubber composites

Manammel Thankappan Ramesan

JOURNAL OF ELASTOMERS AND PLASTICS (2014)

Add to Collection

Article Polymer Science

Influence of mixed sulfur/peroxide curing system and thermo-oxidative ageing on the properties of rubber magnetic composites

Jan Kruzelak et al.

JOURNAL OF POLYMER RESEARCH (2014)

Add to Collection

Article Materials Science, Characterization & Testing

Mechanistic modeling of reversion phenomenon in sulphur cured natural rubber vulcanization kinetics

G. Milani et al.

POLYMER TESTING (2013)

Add to Collection

Article Polymer Science

METHOD TO VULCANIZE NATURAL RUBBER FROM MEDIUM AMMONIA LATEX BY USING GLUTARALDEHYDE

Jobish Johns et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2012)

Add to Collection

Article Spectroscopy

Ab initio Hartree-Fock and density functional theory investigations on the conformational stability, molecular structure and vibrational spectra of 5-chloro-3-(2-(4-methylpiperazin-1-yl)-2-oxoethyl)benzo[d]thiazol-2(3H)-one drug molecule

Erol Tasal et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2012)

Add to Collection

Article Polymer Science

Synthesis of Zn/Mg Oxide Nanoparticles and Its Influence on Sulfur Vulcanization

Manuel Guzman et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

Add to Collection

Article Materials Science, Composites

Carbon black master batch from fresh natural rubber latex

R. Alex et al.

PLASTICS RUBBER AND COMPOSITES (2011)

Add to Collection

Article Polymer Science

Characterization of high-performance exfoliated natural rubber/organoclay nanocomposites

Peiyao Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Add to Collection

Article Materials Science, Composites

Effect of Different Coagents on Physico-Chemical Properties of Electron Beam Cured NBR/HDPE Composites Reinforced With HAF Carbon Black

Magda M. Abou Zeid et al.

POLYMER COMPOSITES (2008)

Add to Collection

Article Polymer Science

Mechanical properties of thermoplastic elastomeric blends of chitosan and natural rubber latex

Vijayalakshmi Rao et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.