☆ 3.8 Article

Variation of Poisson's Ratio of NiTi During Pseudoelastic Deformation

SHAPE MEMORY AND SUPERELASTICITY (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Influences of extrinsic factors on the Luders-type deformation behaviour of NiTi

Yingchao Li et al.

Summary: NiTi shape memory alloys exhibit Luders-type deformation in tension. We propose a new explanation of the mechanism of this behaviour based on a mechanical criterion of sample length change conservation among three contributions, including machine displacement, Luders band elongation and elastic strain contraction, and established a mathematical model to describe the behaviour.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Martensitic phase transformation induced large elastic lattice strains in Nb3Sn lamellae in NiTi-Nb3Sn eutectic composite

Yingchao Li et al.

Summary: By utilizing the principles of lattice strain matching and collective atomic load transfer, ultralarge elastic strains were induced in a brittle NiTi-Nb3Sn eutectic composite, where Nb3Sn lamellae achieved a remarkable elastic lattice strain of -2.4%. This study both tests the applicability of lattice strain matching in brittle materials and explores a novel fabrication approach for in-situ composites via eutectic solidification.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Heat Source Reconstruction and Its Relationship with Functional Fatigue of Pseudoelastic NiTi Ribbons

Ignacio Bustos et al.

Summary: In this study, the local and global effects of functional fatigue of pseudoelastic NiTi ribbons were investigated using digital image correlation and infrared thermography. The in situ full-field techniques allowed for a detailed characterization of strain field inhomogeneities, recoverable strains, and fronts geometry, providing a comprehensive understanding of the global effects of functional fatigue. The heat source reconstruction procedure revealed a strong linear correlation between the calculated heat source and measured local strain rate during the inhomogeneous deformation stages. This correlation was lost as the cycling progresses, indicating the presence of a spatial or temporal lag. Energy balances and latent heats were determined using an alternative method. The experimental data also validated a thermomechanical model for pseudoelastic NiTi wires.

SHAPE MEMORY AND SUPERELASTICITY (2023)

Add to Collection

Article Chemistry, Physical

Luders band evolution in geometrically graded NiTi plates

Bashir S. Shariat et al.

Summary: This study examines the formation and propagation process of Luders bands in parallel-graded NiTi samples during stress-induced martensitic transformation. Digital image correlation is used to measure the full-field strain. The samples with varying width profiles experience progressively increasing load and continuous variation of width during the transformation process. The size of the Luders band front transition zone remains constant, but the local strain rate varies. The transition zone of the forward transformation is wider and has a lower strain rate compared to the reverse transformation.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

A mechanical criterion for Luders-type deformation of polycrystalline NiTi

Yingchao Li et al.

Summary: NiTi shape memory alloys exhibit Luders-type deformation due to stress-induced martensitic transformation. Various explanations have been proposed, but they contradict experimental evidence. In this study, a new model based on the conservation of sample length changes, crosshead movement, and elastic contraction is proposed and verified through experiments and measurements. The new model can describe the upper-lower yielding phenomenon and the plateau stress in Luders-type deformation behavior.

ACTA MATERIALIA (2023)

Add to Collection

Article Engineering, Mechanical

Intrinsic response of nanocrystalline superelastic NiTi shape memory alloy

Zhihao Zhao et al.

Summary: The superelasticity of nanocrystalline NiTi alloys originates from stress-induced martensitic transformation, which may exhibit strain localization. Measuring the intrinsic response during the reverse transformation is difficult, hindering analysis of localized phase transformation phenomena. This study proposes a novel experimental methodology to extract the complete intrinsic response of SMAs and applies it to nanocrystalline superelastic NiTi, providing insights into the deformation mechanisms and paving the way for accurate analysis and design of relevant structures.

EXTREME MECHANICS LETTERS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Atomistic study of the effect of crystallographic orientation on the twinning and detwinning behavior of NiTi shape memory alloys

Sara Fazeli et al.

Summary: This study investigates the impact of crystallographic orientation on the twinning/detwinning mechanisms in NiTi shape memory alloys through MD and DFT computational methods. The findings highlight the significant influence of crystallographic orientation on twinning and detwinning mechanisms, which ultimately affects the fracture toughness of the material.

COMPUTATIONAL MATERIALS SCIENCE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Shear strain evolution during tension-induced Luders-type deformation of polycrystalline NiTi plates

Bashir S. Shariat et al.

Summary: This paper reports a new aspect of Luders-type deformation in NiTi, specifically the occurrence of lateral shear strains during tension-induced Luders deformation. Through digital image correlation analysis, it was found that lateral shear strains occurred in opposite directions within the Luders band, as a means of self-accommodating the lateral displacement caused by the shear strains. Additionally, the propagation of the Luders band changed from a single band mode to a branched mode when the lateral displacement and in-plane bending moment became too large. These findings provide more insight into the characteristics of Luders deformation in NiTi.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Interactions between martensitic NiTi shape memory alloy and Nb nanowires in composite wire during tensile deformation

Xiangguang Kong et al.

Summary: This study investigated the interactions between martensitic NiTi shape memory alloy and Nb nanowires in composite wire during tensile loading. The results show that Nb nanowires have significant influence on the transformation behavior and texture evolution of NiTi matrix, as well as the load transfer among martensite variants. The existence of densely distributed Nb nanowires also leads to increased internal stress in NiTi matrix and negative axial lattice stresses in unfavored martensite variants.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in multicomponent NiTi-based shape memory alloy using metallic glass as a precursor

Woo-Chul Kim et al.

Summary: This paper introduces a new alloy concept based on NiTi alloys, with both glass forming ability and shape memory characteristics. By suppressing the formation of brittle intermetallic compounds, the physical properties of shape memory alloys fabricated using glass precursor can be maximized. The structure and properties of multicomponent SMA systems are also discussed.

PROGRESS IN MATERIALS SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of grain size on L?ders-type deformation and plastic deformation of V nanowires/NiTi composites

Xiaobin Shi et al.

Summary: This study investigates the effect of grain size on Luders-type deformation and plastic deformation in V nanowires/NiTi composites. The results indicate that the migration of grain boundary is suppressed by V nanowires, leading to a decrease in lattice strain.

MATERIALS CHARACTERIZATION (2022)

Add to Collection

Article Materials Science, Multidisciplinary

On the Luders band formation and propagation in NiTi shape memory alloys

Bashir S. Shariat et al.

Summary: This study investigated the local strain evolution during the initiation and propagation of Luders band in a pseudoelastic NiTi alloy and obtained the corresponding local strain rates, providing insight into the mechanism of this phenomenon.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Deformation induced martensite stabilization of NiTi in constrained composite systems

Sam Bakhtiari et al.

Summary: This study investigated the effect of tensile deformation on the transformation behaviour of NiTi within the constrained environment of NiTi-Nb composites. The presence of a second phase within the NiTi matrix hinders the lattice distortion martensitic transformation, and after deformation, the NiTi-Nb microparticle composite exhibited the highest stabilisation effect.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Chemistry, Physical

Controlled initiation and propagation of stress-induced martensitic transformation in functionally graded NiTi

Bashir S. Shariat et al.

Summary: Near-equiatomic NiTi alloys exhibit a thermoelastic B2-B19' martensitic transformation, which can be controlled through the design of geometrically graded structures. Samples in series design configuration showed full controllability, while samples in parallel design configuration exhibited partial controllability over the stress-induced transformation.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Achieving ultra-large elastic strains in Nb thin films on NiTi phase-transforming substrate by the principle of lattice strain matching

Fakhrodin Motazedian et al.

Summary: This study presents an innovative approach to induce ultra-large elastic lattice strains in metallic thin films by using a martensitic transforming substrate, showing great potential for improving functional properties of thin film materials. By matching the lattice strain of the thin film with the crystallographic lattice strain of the substrate, reversible elastic lattice strains were achieved, offering a unique opportunity to engineer and enhance the properties of thin film materials.

MATERIALS & DESIGN (2021)

Add to Collection

Article Engineering, Multidisciplinary

Transferring elastic strain in Mo/Nb/TiNi multilayer nanocomposites by the principle of lattice strain matching

Daqiang Jiang et al.

Summary: This study reports the fabrication of multilayer nanolamellar Mo/Nb/TiNi composites designed by martensitic transformation enabled lattice strain matching, which exhibited excellent mechanical properties in the experiment.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Proceedings Paper Engineering, Mechanical

Calculation of Poisson's Ratios of TiNi Shape Memory Crystals through Their Elastic Constants

Sergey Muslov et al.

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Modelling and experimental investigation of geometrically graded shape memory alloys with parallel design configuration

Bashir S. Shariat et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

High frequency, low power, electrically actuated shape memory alloy MEMS bimorph thermal actuators

Cory R. Knick et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Computational and experimental analyses of martensitic transformation propagation in shape memory alloys

Bashir S. Shariat et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical Properties of TiTaHfNbZr High-Entropy Alloy Coatings Deposited on NiTi Shape Memory Alloy Substrates

A. Motallebzadeh et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)

Add to Collection

Review Materials Science, Multidisciplinary

My Experience with Ti-Ni-Based and Ti-Based Shape Memory Alloys

Shuichi Miyazaki

SHAPE MEMORY AND SUPERELASTICITY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

NiTi-Enabled Composite Design for Exceptional Performances

Yang Shao et al.

SHAPE MEMORY AND SUPERELASTICITY (2017)

Add to Collection

Article Materials Science, Biomaterials

Electrophoretic deposition of double-layer HA/Al composite coating on NiTi

Esmaeil Karimi et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

A nano lamella NbTi-NiTi composite with high strength

Jiang Jiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Phase Transformation of Anisotropic Shape Memory Alloys: Theory and Validation in Superelasticity

Dimitris Chatziathanasiou et al.

SHAPE MEMORY AND SUPERELASTICITY (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Local and global strains and strain ratios in shape memory alloys using digital image correlation

Catherine Bewerse et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Extreme Poisson's ratios and their electronic origin in B2 CsCl-type AB intermetallic compounds

X. F. Wang et al.

PHYSICAL REVIEW B (2012)

Add to Collection

Article Materials Science, Multidisciplinary

On elastic moduli and elastic anisotropy in polycrystalline martensitic NiTi

S. Qiu et al.

ACTA MATERIALIA (2011)

Add to Collection

Article Materials Science, Multidisciplinary

EBSD studies of the stress-induced B2-B19′ martensitic transformation in NiTi tubes under uniaxial tension and compression

S. C. Mao et al.

ACTA MATERIALIA (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Role of elastic and shear stabilities in the martensitic transformation path of NiTi

N. Hatcher et al.

PHYSICAL REVIEW B (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Lattice stability, elastic constants and macroscopic moduli of NiTi martensites from first principles

M. F. -X Wagner et al.

ACTA MATERIALIA (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Zr on the properties of (TiZr)Ni alloys from first-principles calculations

Q. M. Hu et al.

PHYSICAL REVIEW B (2007)

Add to Collection

Article Engineering, Electrical & Electronic

Thermomechanical tensile characterization of Ti-Ni shape memory alloy films for design of MEMS actuator

Takahiro Namazu et al.

SENSORS AND ACTUATORS A-PHYSICAL (2007)

Add to Collection

Article Chemistry, Physical

Comparative study of deformation-induced martensite stabilisation via martensite reorientation and stress-induced martensitic transformation in NiTi

G Tan et al.

INTERMETALLICS (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi

DA Miller et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Stabilisation of martensite due to shear deformation via variant reorientation in polycrystalline NiTi

YN Liu et al.

ACTA MATERIALIA (2000)

Add to Collection

Article Engineering, Mechanical

On thermomechanics and transformation surfaces of polycrystalline NiTi shape memory alloy material

MA Qidwai et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.