☆ 4.6 Review

A Systematic Literature Review: Industry 4.0 Based Monitoring and Control Systems in Additive Manufacturing

MACHINES (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Information Systems

Open Source Monitoring and Alarm System for Smart Microgrids Operation and Maintenance Management

Oscar Izquierdo-Monge et al.

Summary: This paper presents a novel monitoring and alarm system designed to optimize the operation and maintenance of microgrids. Developed using open source software, the system allows for easy programming of alarms or warnings. It has been tested in the CEDER microgrid and can detect faults in various components, sending immediate text messages to operators or maintenance crew to address the problem. The software can also manage preventive maintenance by sending periodic reminders to the crew.

ELECTRONICS (2023)

Add to Collection

Article Statistics & Probability

Statistical Modeling and Monitoring of Geometrical Deviations in Complex Shapes With Application to Additive Manufacturing

Riccardo Scimone et al.

Summary: This study proposes a methodology for characterizing and monitoring complex shapes, applicable to AM data format. By combining a novel bi-directional way to model the deviation between the reconstructed geometry and the nominal geometry with a profile monitoring approach, real geometrical distortions can be effectively detected.

TECHNOMETRICS (2022)

Add to Collection

Review Nanoscience & Nanotechnology

3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies

Zhijie Zhu et al.

Summary: The emerging capability to 3D print a diverse palette of functional inks enables the mass democratization of patient-specific wearable devices and smart biomedical implants. In situ printing provides a potential remedy for geometrically and dynamically mismatched interfaces between printed materials and target surfaces. Artificial intelligence plays a crucial role in sensing, adapting, and predicting the state of the printing environment.

NATURE REVIEWS MATERIALS (2021)

Add to Collection

Article Chemistry, Analytical

MOSS-Multi-Modal Best Subset Modeling in Smart Manufacturing

Lening Wang et al.

Summary: Smart manufacturing integrates multi-sensing systems with physical manufacturing processes for real-time decision making and quality improvement. In practice, budget constraints limit the number of sensors that can be used, making it essential to select the most relevant sensor modalities for quality measurement. The proposed MOSS model effectively selects important sensor modalities and improves modeling accuracy in quality-process relationships.

SENSORS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Smartphone-enabled 3D printing of medicines

Xiaoyan Xu et al.

Summary: 3D printing technology is being widely used in personalized pharmaceuticals, and portable, easy-to-operate printers are needed to realize the potential of point-of-care manufacturing of personalized medications.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A big data-driven framework for sustainable and smart additive manufacturing

Arfan Majeed et al.

Summary: The paper presents the development and application of the sustainable and smart additive manufacturing (SSAM) framework, aiming to improve the production efficiency and sustainability of additive manufacturing enterprises. By combining big data analytics, additive manufacturing, and sustainable smart manufacturing technologies, energy consumption and product quality are effectively controlled.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Towards Machine Learning for Error Compensation in Additive Manufacturing

Amzar Omairi et al.

Summary: This paper reviews the use of data-driven modeling and machine learning for error compensation in additive manufacturing, highlighting the importance of artificial intelligence in predictive modeling for intelligent, efficient, customizable, high-quality, and sustainable production processes.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Pharmacology & Pharmacy

Machine Learning and Machine Vision Accelerate 3D Printed Orodispersible Film Development

Colm S. O'Reilly et al.

Summary: Orodispersible films (ODFs) are a promising delivery system in various clinical applications, but their manufacturing lacks personalized, on-demand or sustainable approaches. To address this, 3D printing and machine learning technologies were utilized for on-demand production and quality control of ODFs. The combination of these technologies showed potential for rapid production and verification of ODFs, as well as automation of in vitro testing using machine vision tools.

PHARMACEUTICS (2021)

Add to Collection

Review Materials Science, Coatings & Films

New Process Implementation to Enhance Cold Spray-Based Additive Manufacturing

Hongjian Wu et al.

Summary: Cold spraying additive manufacturing technology is evolving, with a proposed modular system design and implementation for improved manufacturing accuracy and flexibility. By integrating perception and decision-making abilities into traditional cold spray systems, closed-loop control and real-time optimization of kinematic parameters for CSAM have been achieved.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Optimizing Quality Inspection and Control in Powder Bed Metal Additive Manufacturing: Challenges and Research Directions This article provides a wide overview of the latest progress of in situ monitoring and control in powder bed metal additive manufacturing, showcasing solutions from both research and industry

Santa di Cataldo et al.

Summary: Additive manufacturing plays a crucial role in achieving faster, cleaner, and more customizable manufacturing processes in the context of Industry 4.0. However, the lack of repeatability in the manufacturing process is a major barrier to its widespread adoption in mass production. Efforts are being made to integrate advanced information technologies and data-driven approaches to improve quality monitoring and process optimization in additive manufacturing, with a focus on metal powder bed fusion technologies.

PROCEEDINGS OF THE IEEE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Model for Working Environment Monitoring in Smart Manufacturing

Dalibor Dobrilovic et al.

Summary: This research proposes a model for working environment monitoring in smart manufacturing systems, along with a testing platform for model validation and student teaching. The use of wireless sensor technologies and the MQTT protocol addresses the growing need for new teaching platforms in the field of smart manufacturing and Industry 4.0.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Engineering, Mechanical

USE OF SMART 3D PRINTING TECHNOLOGY IN CONVENTIONAL ENGINEERING PRODUCTION TO DETECT AND PREVENT THE OCCURRENCE OF DEFECTS

Filip Sproch et al.

Summary: This article demonstrates the use of SMART 3D printing technology and the Poka-Yoke methodology to streamline conventional engineering production, increase productivity, and enhance competitiveness in the market under the context of Industry 4.0.

MM SCIENCE JOURNAL (2021)

Add to Collection

Review Pharmacology & Pharmacy

Connected healthcare: Improving patient care using digital health technologies

Atheer Awad et al.

Summary: Digital technologies of Healthcare 4.0 are revolutionizing traditional healthcare models, with advancements in patient monitoring, personalized medicine, precision surgery, and medical logistics using drones. This review discusses the most promising healthcare technologies, their strengths, limitations, and opportunities for clinical adoption.

ADVANCED DRUG DELIVERY REVIEWS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Machine learning predicts 3D printing performance of over 900 drug delivery systems

Brais Muniz Castro et al.

Summary: Three-dimensional printing (3DP) is a transformative technology in pharmaceutical research, producing personalized drug products. However, slow progress has been made due to the lengthy trial-and-error optimization process. Artificial intelligence (AI) has the potential to revolutionize pharmaceutical 3DP by analyzing large datasets.

JOURNAL OF CONTROLLED RELEASE (2021)

Add to Collection

Review Pharmacology & Pharmacy

Disrupting 3D printing of medicines with machine learning

Moe Elbadawi et al.

Summary: 3D printing technology has the potential to revolutionize pharmaceutical development, but its integration into clinical settings can be accelerated by partnering with modern technologies like machine learning. This collaboration can expedite drug product development and inspire innovative dosage-form design, marking the next era of personalized medicine.

TRENDS IN PHARMACOLOGICAL SCIENCES (2021)

Add to Collection

Article Engineering, Manufacturing

Sustainable manufacturing of ultra-fine aluminium alloy 6101 wires using controlled high levels of mechanical strain and finite element modeling

Serafino Caruso et al.

Summary: This study proposed a new severe plastic deformation process aiming to lead manufacturing towards the fourth industrial revolution by utilizing some of Industry 4.0 pillars. By employing additive manufacturing technology and numerical simulations as monitoring techniques, ultra-fine aluminum alloy wires production was achieved. Experimental and numerical analyses demonstrated the effectiveness of the process, showcasing how the combination of smart manufacturing and simulation control plays a crucial role in renewing traditional manufacturing methods towards Industry 4.0.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Monitoring System for Tracking a PV Generator in an Experimental Smart Microgrid: An Open-Source Solution

Jose Maria Portalo et al.

Summary: Smart grids and smart microgrids require proper monitoring for their operation, and this paper presents a monitoring system based on open-source hardware and software for tracking the temperature of the photovoltaic generator in such a SMG. The monitoring system consists of a network of digital temperature sensors connected to an Arduino microcontroller, which feeds the acquired data to a Raspberry Pi microcomputer, accessed by a cloud-enabled user/operator interface implemented in Grafana.

SUSTAINABILITY (2021)

Add to Collection

Article Computer Science, Information Systems

Enhancing Surface Fault Detection Using Machine Learning for 3D Printed Products

Vaibhav Kadam et al.

Summary: In the era of Industry 4.0, the concept of 3D printed products has gained attention, but issues with quality still exist due to variations in properties and structure. By using machine learning algorithms and pre-trained models for layer-wise anomaly detection, real-time fault detection can be achieved. Experimental results show that the combination of Alexnet and SVM algorithm has the highest accuracy, with low costs for experiments and computations.

APPLIED SYSTEM INNOVATION (2021)

Add to Collection

Article Engineering, Manufacturing

Modeling Fused Filament Fabrication using Artificial Neural Networks

Paul Oehlmann et al.

Summary: With industries moving towards digitalized production, additive manufacturing has become a key component of Industry 4.0, accelerating digital production through its possibilities in structural design, production flexibility, customization, and product development. Fused Filament Fabrication is a practical tool for rapid prototyping and demonstrates the importance of AM technologies in accessible desktop solutions. Enhanced integration of systems in an intelligent production environment enables the generation of large-scale data for process monitoring and control.

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Designing a multi-agent system architecture for managing distributed operations within cloud manufacturing

Giuseppe D'Aniello et al.

Summary: Cloud manufacturing is a challenging scenario in the fourth stage of industrial production, characterized by intelligent management of manufacturing resources, production planning, and task scheduling. However, there are still some issues to be addressed, such as dynamic task arrival, machine downtime, anomalous tasks identification, etc.

EVOLUTIONARY INTELLIGENCE (2021)

Add to Collection

Article Engineering, Industrial

Cyber-based design for additive manufacturing using artificial neural networks for Industry 4.0

Hietam Elhoone et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Improved quality assessment of colour surfaces for additive manufacturing based on image entropy

Krzysztof Okarma et al.

PATTERN ANALYSIS AND APPLICATIONS (2020)

Add to Collection

Article Engineering, Environmental

Industry 4.0 and circular economy: Operational excellence for sustainable reverse supply chain performance

Navin K. Dev et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A generic tri-model-based approach for product-level digital twin development in a smart manufacturing environment

Pai Zheng et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2020)

Add to Collection

Review Chemistry, Analytical

Motion Capture Technology in Industrial Applications: A Systematic Review

Matteo Menolotto et al.

SENSORS (2020)

Add to Collection

Article Computer Science, Information Systems

Towards Reinforcing Healthcare 4.0: A Green Real-Time IIoT Scheduling and Nesting Architecture for COVID-19 Large-Scale 3D Printing Tasks

Lamis R. Darwish et al.

IEEE ACCESS (2020)

Add to Collection

Article Energy & Fuels

Future Sensors for Smart Objects by Printing Technologies in Industry 4.0 Scenario

Michela Borghetti et al.

ENERGIES (2020)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Smart production planning and control in the Industry 4.0 context: A systematic literature review

Adauto Bueno et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2020)

Add to Collection

Article Engineering, Industrial

A novel multi-brand robotic software interface for industrial additive manufacturing cells

Carlos Ye Zhu et al.

INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION (2020)

Add to Collection

Article Engineering, Manufacturing

Inline measurement strategy for additive manufacturing

Matthias Bordron et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)

Add to Collection

Article Engineering, Industrial

Sustainable and flexible industrial human machine interfaces to support adaptable applications in the Industry 4.0 paradigm

Aitor Ardanza et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)

Add to Collection

Article Engineering, Manufacturing

Deep Learning for Distortion Prediction in Laser-Based Additive Manufacturing using Big Data

Jack Francis et al.

MANUFACTURING LETTERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Additive manufacturing: scientific and technological challenges, market uptake and opportunities

Syed A. M. Tofail et al.

MATERIALS TODAY (2018)

Add to Collection

Article Engineering, Industrial

Adopting additive manufacturing in SMEs: exploring the challenges and solutions

Miia Martinsuo et al.

JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2018)

Add to Collection

Article Engineering, Mechanical

The FaaS system using additive manufacturing for personalized production

Hyoung Seok Kang et al.

RAPID PROTOTYPING JOURNAL (2018)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Intelligent nozzle design for the Laser Metal Deposition process in the Industry 4.0

J. I. Arrizubieta et al.

MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)

Add to Collection

Article Engineering, Industrial

SMART PRODUCT DESIGN AND PRODUCTION CONTROL FOR EFFECTIVE MASS CUSTOMIZATION IN THE INDUSTRY 4.0 CONCEPT

Przemyslaw Zawadzki et al.

MANAGEMENT AND PRODUCTION ENGINEERING REVIEW (2016)

Add to Collection

© Peeref 2019-2024. All rights reserved.