Related references
Note: Only part of the references are listed.
Article
Engineering, Mechanical
Seethi Reddy Reddisekhar Reddy
Summary: This study focuses on the time-dependent pulsatile magnetohydrodynamics hybrid nanofluid with entropy optimization and electrokinetic force in a channel. The mathematical model analyzes the flow of copper-gold-blood hybrid nanofluids and obtains exact solutions for velocity, temperature, heat transfer rate, and streamlines using the perturbation approach. The study reveals that the velocity of blood-based Cu-Au hybrid nanofluid increases with the electro-osmotic parameter, and higher copper-gold nanoparticle volume fraction leads to increased entropy generation.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
(2023)
Article
Engineering, Multidisciplinary
Hossam A. Nabwey et al.
Summary: The introduction of hybrid nanofluids has significant applications in various engineering and industrial fields such as low-pressure drop, wider absorption range, generator cooling, good thermal conductivity, nuclear system cooling, and heat exchangers. This study focuses on the unsteady MHD free convection flow of hybrid nanofluid in an inclined wavy permeable enclosure with a square obstacle, considering the effects of radiation and heat generation/absorption. The results show that parameters such as porosity, nanoparticle volume fraction, and Hartmann number have an impact on the average Nusselt number and distribution of isothermal lines.
ALEXANDRIA ENGINEERING JOURNAL
(2023)
Article
Nuclear Science & Technology
Aissa Abderrahmane et al.
Summary: This study investigates the buoyancy-driven flow of a hybrid nanofluid in a cubical cavity in the presence of a magnetic field. The numerical results demonstrate that the geometrical parameters, non-Newtonian properties, and magnetic field have significant effects on the heat exchange in the cavity.
ANNALS OF NUCLEAR ENERGY
(2023)
Article
Thermodynamics
Yu-Ming Chu et al.
Summary: The study investigates the impact of double diffusion, activation energy, Brownian motion, thermal radiation, thermophoresis, viscous dissipation, magnetic field, and Joule heating on bioconvection of a tangent hyperbolic nanofluid flow over a vertical stretching porous surface containing microbe. The fluid transport equations are solved using the finite difference method and the effects of key parameters on the fluid's transport properties are depicted in graphs and tables. It is observed that higher dimensionless activation energy leads to a decrease in mass transfer rate at the stretched nanomaterial sheet, and the concentration of the nanofluid near the sheet decreases with an increase in the porosity parameter value, but the opposite behavior is observed far from the sheet.
CASE STUDIES IN THERMAL ENGINEERING
(2023)
Article
Materials Science, Multidisciplinary
Shaik Jakeer et al.
Summary: This article investigates the influence of non-linear Darcy-Forchheimer on the EMHD flow of a couple stress water-based nanofluid, hybrid nanofluid, and ternary hybrid nanofluid with thermal radiation on a stretching sheet. The research finds that the ternary hybrid nanofluid has a greater impact on temperature compared to the nanofluid and hybrid nanofluid.
FORCES IN MECHANICS
(2023)
Article
Environmental Studies
Wasim Jamshed
Summary: This study focuses on analyzing solar aircraft hybrid nanofluid transfer via parabolic trough surface collector solar wings. The efficiency of the wings in terms of heat transfer is evaluated under various phenomena such as slanted magnetic field, Joule heating, play heat and thermal radiative flow.
ENERGY & ENVIRONMENT
(2022)
Article
Physics, Multidisciplinary
S. R. R. Reddy et al.
Summary: The study focuses on the energy loss in biological systems, particularly in the form of blood perfusion, and its consequences such as hypothermia and cardiovascular problems. It also examines the use of entropy generation in cancer treatment. A mathematical model is used to analyze the entropy generation of a gold-blood pseudoplastic nanofluid flow in a microchannel, considering electrokinetic force and electro-conductive heating. The results show that certain parameters, such as Hartmann number and electro-osmosis parameter, have significant effects on velocity and temperature profiles. The research sheds light on the understanding of energy loss in biological systems and has potential implications for medical treatments.
EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS
(2022)
Article
Physics, Multidisciplinary
Jakeer Shaik et al.
Summary: This paper investigates natural convection in a sinusoidal wavy cavity filled with TiO2-Cu/water hybrid nanofluid, considering the effects of internal heat generation, inclined magnetic field, and thermal radiation. The non-Fourier heat flux model is used to formulate the temperature equation. The study finds that the heat transfer rate and fluid flow are influenced significantly by the internal heat generation and wavy walls. Higher values of the heat generation parameter increase the heat transfer rate but decrease the local Nusselt numbers. Increasing the undulation parameter enhances the complexity of the flow domain and reduces convective transport. Cu nanoparticles exhibit a higher heat transfer rate compared to TiO2 nanoparticles in the presence of a magnetic field. The streamlines are closer to the heated wall and the top of the cold wall as the internal heat generation parameter increases from -2 to 2.
EUROPEAN PHYSICAL JOURNAL PLUS
(2022)
Article
Asgar Ali et al.
International Journal of Ambient Energy
(2022)
Article
Physics, Multidisciplinary
Andac Batur Colak et al.
Summary: Nano-engineering has advanced to utilize nanoparticles with base fluids to enhance the thermal properties of pure fluids, playing a crucial role in improving thermal machine efficiency. The study utilized artificial neural networks to simulate bioconvective behaviors in a nanofluid model and developed prediction models for accurate forecasts.
CHINESE JOURNAL OF PHYSICS
(2022)
Article
Thermodynamics
Muhammad Shoaib et al.
Summary: The major purpose of this article is to use the Intelligent Back-propagated Neural Networks of Levenberg Marquardt Technique (IBNN-LMT) to study the 3D squeezed flow model of carbon nanotubes (SFM-CNTs) in a revolving network with a rigid ground wall, considering the influence of magnetohydrodynamic (MHD) and thermal radiation. The authors converted the partial differential equations (PDEs) into ordinary differential equations (ODEs) using similarity transformation and estimated the impact of each parameter on velocity, temperature, Bejan number, and entropy production for different nanofluids. The researchers also evaluated the accuracy of the proposed solution through comparison with a standard solution and performance studies.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Thermodynamics
Puneet Rana et al.
Summary: In this study, the impact of various control parameters on natural convection phenomena in a cavity containing hybrid nanoliquid is investigated using the Galerkin Finite Element Method. Results are evaluated and predicted using a feed forward neural network model, with a focus on the average Nusselt number.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Chemistry, Physical
Faisal Shahzad et al.
Summary: The paper investigates the behavior of Sutterby nanofluid with fluctuating thermal conductivity, radiation, and a magnetic field on a sloping sheet. The study finds that the CuO-engine oil nanofluid system exhibits the best heat transmission efficiency and hydrogen generation, outperforming the engine oil nanofluid.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2022)
Article
Engineering, Mechanical
Shaik Jakeer et al.
Summary: The significance of variable magnetic field and magnetohydrodynamic stagnation point flow of Eyring-Powell hybrid dusty nanofluid over a Darcy-Forchheimer sheet was analyzed in this study. It was found that the hybrid nanofluid has a higher heat transfer process compared to the dusty nanofluid.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
(2022)
Article
Thermodynamics
S. R. R. Reddy et al.
Summary: Mathematical modelling of biological fluids is crucial in various medical fields. This study focuses on the pulsatile flow of hybrid nanofluids in vertically permeable irregular channels, considering thermal radiation and heat source effects. The results demonstrate that hybrid nanoparticles can lower blood temperature and enhance drug delivery performance.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Thermodynamics
A. S. M. Metwally et al.
Summary: This work analyzes the heat transfer of Sutterby fluid flow over a curved surface and discusses the bubbling prospects of the magnetic field. By incorporating the consequence of radiation, the temperature field equation is obtained. The governing equations for the non-Newtonian fluid model over a curved surface are derived and transformed into nonlinear ODEs for solution. Graphical interpretations are provided for the temperature and velocity profiles with various physical parameters.
JOURNAL OF ENGINEERING THERMOPHYSICS
(2022)
Article
Chemistry, Multidisciplinary
Muapper Alhadri et al.
Summary: The radiative properties of a Cu-Al2O3/water hybrid nanofluid with respect to joule heating and suction effects over a stretched sheet were examined in this study. The Darcy-Forchheimer theory was used to endorse the inertial and porous media effects, and an artificial neural network was employed to predict the skin friction and local Nusselt number.
JOURNAL OF THE INDIAN CHEMICAL SOCIETY
(2022)
Article
Engineering, Multidisciplinary
Xinlin He et al.
Summary: This research evaluates various methods to enhance the performance of microchannels using Artificial Neural Network (ANN) and lattice Boltzmann method (LBM). The study combines LBM with ANN to investigate the impact of magneto hydro dynamic (MHD) on slip velocity of nanofluid flow inside microchannels. The efficiency of the cooling system is increased by using multiple fins and applying a magnetic field to reduce thermal boundary layer and enhance heat transfer.
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
(2022)
Article
Thermodynamics
Tawfiq Al-Mughanam et al.
Summary: This study focuses on the impact of tri-nanoparticles on thermal enhancement in fluid and finds that tri-nanofluids have better heat transfer performance, especially in terms of wall heat flux.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Chemistry, Physical
M. M. Bhatti et al.
Summary: In recent years, the conversion of solar radiation to thermal energy has received significant attention due to the increasing demand for renewable heat and power. This paper investigates the flow of a hybrid nanofluid through a porous medium and its impact on the performance of solar-thermal systems.
JOURNAL OF MOLECULAR LIQUIDS
(2022)
Article
Engineering, Multidisciplinary
Liu Xingting et al.
Summary: This study used the non-Newtonian Sisko model and UDF in Fluent to simulate blood flow behavior within stenosis arteries. The effects of different stenosis angles and artery radii on the Nusselt number and temperature of blood flow were studied. The results showed that increasing stenosis angles and reducing internal radius narrowed the artery, resulting in higher Nusselt number and lower temperature of blood flow. The application of different heat fluxes also led to significant temperature enhancements, which have important implications in medical science.
ALEXANDRIA ENGINEERING JOURNAL
(2022)
Article
Multidisciplinary Sciences
Alok Kumar Pandey et al.
Summary: The magnetized flow behaviour of a hybrid nanofluid containing molybdenum disulphide (MoS2) and graphene oxide (GO) nanoparticles, subject to multiple slip mechanisms, natural convection and chemical reaction, is examined in this study. The hybrid nanofluid is prepared by combining MoS2, GO, and a conventional fluid (H2O). The equations of the model are solved using shooting and bvp4c techniques, and are validated against previous research. The study shows that an increase in thermal slip parameter values leads to a depreciation in the thermal field profiles of MoS2-GO/H2O. Additionally, an increase in velocity slip parameter results in an increase in temperature and concentration functions, while the velocity outlines of the MoS2-GO/H2O fluid decrease. Furthermore, an increase in natural convection parameter values leads to an augmentation in the velocity functions and a decline in the concentration function of MoS2-GO/H2O.
JOURNAL OF TAIBAH UNIVERSITY FOR SCIENCE
(2022)
Article
Thermodynamics
Jamel Bouslimi et al.
Summary: This study investigates the impact of magnetic force and nanofluid on the heat transmission of parabolic trough solar collector (PTSC) through entropy analysis and simulation. The results indicate that increasing the magnetic force and nanofluid parameters can improve the thermal efficiency of the system.
CASE STUDIES IN THERMAL ENGINEERING
(2022)
Article
Chemistry, Physical
M. M. Bhatti et al.
Summary: This article discusses the behavior of diamond and silica nanoparticles suspended in water-based hybrid nanofluids on an exponentially elastic surface, and analyzes the flow characteristics. Mathematical formulations and numerical methods are used to obtain results related to velocity profiles, skin friction coefficients, temperature profiles, and Nusselt numbers, which are compared and validated against previous studies.
JOURNAL OF MOLECULAR LIQUIDS
(2022)
Article
Thermodynamics
S. Saranya et al.
Summary: This study investigates the shape effect of Al2O3 nanoparticles in a nanofluid flow, finding that platelet-shaped nanoparticles have the highest dynamic viscosity and blade-shaped nanoparticles have the strongest thermal conductivity. Friction coefficient is higher with magnetic field strength and disk radial stretching, while heat transfer rate significantly increases when neglecting magnetic field and radiation effects.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Thermodynamics
Alok K. Pandey et al.
Summary: This study investigates the impact of magnetic nanofluid flow over a curved surface in the presence of heat and mass mixed convection, considering various parameters and analyzing the effects of heat and mass transfer.
Article
Physics, Multidisciplinary
Asmat Ullah Yahya et al.
Summary: This study investigates the thermal characteristics of Williamson-Sutterby nanofluid through a Darcy-Forchheimer sponge medium, considering the impact of bio-convection and electromagnetic fields. The analysis highlights the effects of different parameters on fluid flow and heat transfer, aiming to prevent settling of nano-entities while maintaining effective heat transportation.
CHINESE JOURNAL OF PHYSICS
(2021)
Article
Engineering, Chemical
Andac Batur Colak
Summary: The study experimentally investigated the viscosity of different concentrations of ZrO2/Water nanofluids, showing that viscosity decreases with increasing temperature and increases with concentration. The developed artificial neural network and mathematical model accurately predicted and calculated the viscosity of ZrO2/Water nanofluids.
Article
Materials Science, Multidisciplinary
Hossam A. Nabwey et al.
Summary: A comprehensive investigation on transient magnetohydrodynamics boundary layer flow of non-Newtonian micropolar hybrid nanofluid immersed with conducting micrometer homogeneously sized dust nanoparticles was conducted. The mathematical model was formulated and solved using the MATLAB approach, with outcomes for different parameters evaluated and presented graphically and in tables. Enhancement in thermal relaxation was found to strengthen temperature variation in both micropolar hybrid nanofluid and dust phases, validated by comparison with earlier published data.
RESULTS IN PHYSICS
(2021)
Review
Green & Sustainable Science & Technology
M. Sheikholeslami et al.
Summary: The current review provides empirical and numerical analyses of the thermal performance development in flat plate solar collectors (FPSCs), showing that utilizing nanofluids in PVT and thermal systems can increase both electrical and thermal energy outputs. Studies demonstrate a higher overall performance in FPSCs with the use of nanofluids, highlighting the potential benefits of incorporating nanofluids in solar energy systems.
JOURNAL OF CLEANER PRODUCTION
(2021)
Article
Thermodynamics
Kamran Ahmed et al.
Summary: This study investigates the flow of two-dimensional MHD Williamson nanofluid over a curved surface and examines the effects of various physical parameters on velocity, pressure, temperature, and concentration profiles.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Asgar Ali et al.
International Journal of Applied and Computational Mathematics
(2021)
Article
Engineering, Chemical
Vakkar Ali et al.
Summary: The study successfully measured the surface tension of ethylene glycol using SITA dynotester and found that adding WO3 nanoparticles can weaken the surface tension. Response surface methodology and artificial neural network performed well in navigating the surface tension, demonstrating the reliability of surface tension measurement.
Article
Materials Science, Multidisciplinary
Wasim Jamshed et al.
Summary: This study focuses on the thermal efficiency of solar aircraft wings, utilizing hybrid nanofluid to enhance heat transfer efficiency. The results show that hybrid nanofluid is a more ideal heat transfer source compared to traditional nanofluid.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
(2021)
Article
Thermodynamics
Ashish Mishra et al.
Summary: This study conducts an analysis of heat and mass transfer over a curved surface under the influence of chemical reaction, friction heating, and heat generation/absorption, with the random motion attributes of nanoparticles and thermophoresis applied in the expressions of energy and concentration. Nonlinear partial differential equations are transformed to dimensionless ordinary differential equations, with numerical solutions obtained using a fourth-fifth order Runge-Kutta-Fehlberg method. The impacts of relevant parameters on velocity, temperature, and concentration are depicted, revealing relationships between concentration distribution of nanofluid and chemical reaction parameter, as well as the effects of thermophoresis, Brownian motion, and curvature parameters on temperature and velocity profiles.
Article
Thermodynamics
Asgar Ali et al.
Summary: This study focuses on the hydrothermal behavior of a mixed convective flow of a hybrid nanoliquid over a convectively heated curved surface under a uniform transverse magnetic field. The incorporation of first- and second-order velocity slip conditions and nonlinear radiative heat flux leads to changes in the velocity profile and local surface properties, particularly affected by the presence of carbon nanotubes and magnetite nanoparticles in the nanoliquid. The numerical analysis demonstrates the impact of physical and geometrical parameters on the dimensionless physical quantities of interest and highlights the different effects of single-walled carbon nanotubes and multi-walled carbon nanotubes in the suspension.
Article
Energy & Fuels
Fatih Selimefendigil et al.
JOURNAL OF ENERGY STORAGE
(2020)
Article
Physics, Multidisciplinary
H. Thameem Basha et al.
EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS
(2019)
Article
Thermodynamics
Raouf Khosravi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2019)
Article
Thermodynamics
M. R. Zangooee et al.
CASE STUDIES IN THERMAL ENGINEERING
(2019)
Article
Chemistry, Physical
Seyed Hadi Rostamian et al.
JOURNAL OF MOLECULAR LIQUIDS
(2017)
Article
Materials Science, Multidisciplinary
N. F. Okechi et al.
RESULTS IN PHYSICS
(2017)
Article
Computer Science, Artificial Intelligence
Muhammad Asif Zahoor Raja et al.
