☆ 4.7 Review

Application of Hydrogels and Hydrocarbon-Based Gels in Oil Production Processes and Well Drilling

GELS (2023)

Related references

Note: Only part of the references are listed.

Review Chemistry, Multidisciplinary

Recent advances in enhanced polymer gels for profile control and water shutoff: A review

Siyu Lu et al.

Summary: Polymer gels are commonly used for water management in low-middle temperature and salinity reservoirs, but have limitations in high temperature and salinity conditions. This review explores the development and application of enhanced polymer gels, including nano silica, cellulose, graphite, oily sludge, and foam enhancements. The addition of strengthening materials improves the gel's resistance to temperature and salt, making it suitable for high temperature and salinity reservoirs. The article also provides references and future research directions for enhanced polymer gel systems.

FRONTIERS IN CHEMISTRY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Conformational Analysis of the Multicomponent Media Used in Oil and Gas Production Technologies for Water Shutoff

V. P. Meshalkin et al.

Summary: The rheological behavior of complex hydrogel systems used for water shutoff in high water-cut wells was studied before and after filtration in cracks with different openings. The research focused on multicomponent mixtures of sodium silicate and polyacrylamide (PAA) solutions, crosslinked with Cr3+ salts, and containing solid lignin particles. The experimental data were analyzed using a particle-based approach, considering the activation and decay of structural elements under shear stress. The analysis revealed a quasi-discrete character of the spectra of structural elements and a strong cooperative interaction among them.

RUSSIAN JOURNAL OF GENERAL CHEMISTRY (2023)

Add to Collection

Article Thermodynamics

Polyacrylamide Hydrogels with a Dispersed Filler: Specifics of Rheology and Filtration in Fractures

A. G. Telin et al.

Summary: This study investigates the rheology of hydrogels composed of sodium silicate, polyacrylamide, chromium acetate, and a dispersed filler (rice husk) in filtration through an ideal fracture model. The addition of a dispersed filler significantly enhances the strength of the water shutoff screen after filtration in fractures. On the other hand, hydrogels based on polyacrylamide, resorcinol, and paraform do not experience any mechanochemical destruction after filtration in fractures. The introduction of dispersed materials into hydrogels for water shutoff of fractured reservoirs significantly increases the technological efficiency by reducing mechanical destruction and increasing the residual resistance factor.

JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS (2023)

Add to Collection

Article Chemistry, Applied

High stretchable and self-healing nanocellulose-poly(acrylic acid) composite hydrogels for sustainable CO2 shutoff

Ziteng Liu et al.

Summary: The injection of CO2 into oil reservoirs for enhanced oil recovery is widely used, although reservoir fractures can cause gas channeling. This study developed a novel plugging gel with excellent mechanical properties, fatigue resistance, and self-healing abilities to shut off CO2 flow. The gel, made of grafted nanocellulose and polymer network crosslinked by Fe3+, exhibited a stress of 1.03 MPa, a strain of 1491%, and self-healed to 98% stress and 96% strain after rupture. The introduction of TOCNF/Fe3+ improved energy dissipation and self-healing through dynamic coordination bonds and hydrogen bonds. The gel showed great potential for plugging high-pressure CO2 flow, making it a promising method for CO2-EOR and carbon storage.

CARBOHYDRATE POLYMERS (2023)

Add to Collection

Article Energy & Fuels

High stability polymer gel for lost circulation control when drilling in fractured oil and gas formations

Yingrui Bai et al.

Summary: A high stability polymer gel was synthesized and proved effective in controlling lost circulation in fractured oil and gas formations at high temperatures. The gel exhibited a complex network structure, providing mechanical and thermal resilience. Experimental results showed good stability and plugging capability of the gel under high temperature and high salinity conditions. Field tests confirmed its feasibility in controlling lost circulation in fractured formations.

GEOENERGY SCIENCE AND ENGINEERING (2023)

Add to Collection

Review Energy & Fuels

Polymer flooding: Current status and future directions

R. S. Seright et al.

Summary: This review discusses the factors influencing the development of polymer flooding technology and presents insights into the dominance of HPAM as the main polymer used. It also highlights the requirements for alternative polymers and mobility-control methods to be viable. The paper explains the need for large polymer banks in polymer flooding and provides details on designing the injected polymer viscosity in different scenarios. Additionally, the role of fractures and horizontal wells in improving injectivity and extending the applicability of polymer flooding to high-viscosity oils is discussed. The review also describes operational improvements to enhance the stability of HPAM and ATBS polymers at elevated temperatures and summarizes key factors affecting polymer retention. The paper concludes by pointing out unresolved issues and future directions in the field of polymer flooding.

PETROLEUM SCIENCE (2023)

Add to Collection

Review Energy & Fuels

A critical review of self-diverting acid treatments applied to carbonate oil and gas reservoirs

Mohammed Al-Shargabi et al.

Summary: Carbonate reservoirs often require cleanup and stimulation to improve resource recovery rates. Acidizing is a common technique, but its efficiency depends on various factors. There is a need to enhance acid treatment technologies, including the use of nanoparticles, to make them more reliable and effective. This review discusses laboratory-scale and field-scale acid treatment techniques for carbonate reservoirs and compares the positive and negative influences of different acid treatments on oil production rates and recovery. Environmental impacts and future research directions are also considered.

PETROLEUM SCIENCE (2023)

Add to Collection

Article Energy & Fuels

Preparation, characterization and application of environment-friendly high density and low damage solid free completion fluids for completing HTHP oil and gas wells

Jinhua Huo et al.

Summary: In this study, high density and low damage solid free completion fluids were prepared and their properties, including solid free characteristics, biological toxicity, pH and density stability, were studied. The thermal stability, rheological, lubrication and inhibition performances of completion fluids were investigated. The corrosion performances and mechanism of completion fluids on different materials were studied. The compatibility of completion fluids with other drilling fluids was investigated. The results show that the developed completion fluids meet the design requirements and can be used for well-killing operations in HTHP oil and gas wells.

GEOENERGY SCIENCE AND ENGINEERING (2023)

Add to Collection

Article Polymer Science

Synthesis and Characterization of an Novel Intercalated Polyacrylamide/Clay Nanocomposite

Song Zhang et al.

Summary: Solving the low temperature and low salt resistance of conventional polyacrylamide and the high cost of functional monomers, this study synthesized an intercalated polyacrylamide/clay nanocomposite using montmorillonite as the inorganic clay mineral. The optimal synthesis conditions were determined, and the polymer was successfully introduced to the nanocomposite. The intercalated polyacrylamide/clay nanocomposite exhibited better thickening effect, viscoelasticity, salt resistance, and thermal stability compared to polyacrylamide, expanding its application in petroleum exploitation.

GELS (2023)

Add to Collection

Review Computer Science, Interdisciplinary Applications

A Review of Hydraulic Fracturing Simulation

Bin Chen et al.

Summary: This paper discusses the physical processes, numerical models, and commercial software related to hydraulic fracturing, analyzing their effects and highlighting pros and cons. Based on these discussions, recommendations for further research are provided.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Conjoined-network induced highly tough hydrogels by using copolymer and nano-cellulose for oilfield water plugging

Jintao Li et al.

Summary: In this study, a conjoined-network induced hydrogel was prepared for in-depth water control in oilfields, which showed a significant capacity for efficient water plugging. The addition of a small amount of nano-cellulose increased the compressive strength of the hydrogel and endowed it with excellent thermal stability and high shearing elasticity. This novel hydrogel design provides a solution for water shutoff and conformance control in heterogeneous oil reservoirs.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Effect of spacer hydroxyl number on the performance of Gemini cationic viscoelastic surfactant for fracturing fluids

Jincheng Mao et al.

Summary: This study synthesized Gemini cationic VESs with different numbers of hydroxyl groups in the spacer and investigated their performance in fracturing fluids. It was found that increasing numbers of hydroxyl groups in the spacer improved the surfactant performance, leading to the design ideas for high-performance clean fracturing fluids.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Perspective Review of Polymers as Additives in Water-Based Fracturing Fluids

Sameer Al-Hajri et al.

Summary: This paper summarizes the literature on the use of polymers in hydraulic fracturing and discusses current issues, efforts, and trends in the field. The role and limitations of polymers in fracturing fluids are also reviewed. The research suggests that polymers are important additives in fracturing fluids, providing adequate proppant transportation and determining fracture width. The development of synthetic polymers and associative polymers shows potential for improving the stability of fracturing fluids in unconventional reservoirs.

ACS OMEGA (2022)

Add to Collection

Article Chemistry, Physical

Regulation rule of cellulose nanocrystals on thixotropy of hydrogel for water shutoff in horizontal wells

Feiyang Huang et al.

Summary: In this study, a hydrogel with high thixotropy was developed using cellulose nanocrystals (CNC) for water shutoff in horizontal wells. The results showed that increasing the concentration of CNC enhanced the thixotropic feature of the hydrogel. The presence of inorganic salts reduced the thixotropic performance, while high temperature had a negative influence on the thixotropy of the CNC hydrogel. The study contributes to the regulation theory between nanoparticles and polymers, and provides technical guidance for enhancing the thixotropy of polymers used in the petroleum industry.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Optimization of High Temperature-Resistant Modified Starch Polyamine Anti-Collapse Water-Based Drilling Fluid System for Deep Shale Reservoir

Xiangwei Kong et al.

Summary: During drilling in deep shale gas reservoirs, problems such as drilling fluid losses and hole wall collapses frequently occur. Optimizing water-based drilling fluid systems can effectively reduce the rate of complex accidents and improve drilling efficiency.

MOLECULES (2022)

Add to Collection

Article Energy & Fuels

Effect of Temperature Conditions in Arctic Offshore Oil Fields on the Rheological Properties of Various Based Drilling Muds

Ekaterina Leusheva et al.

Summary: This paper investigates the deviations in rheological parameters of drilling muds caused by temperature changes during offshore drilling beyond the Arctic Circle. The authors propose a new formula for a drilling mud that exhibits more stable rheological parameters and is environmentally friendly. Experimental results show that the newly designed drilling mud is more stable at high temperatures compared to its hydrocarbon-based counterpart.

ENERGIES (2022)

Add to Collection

Article Energy & Fuels

Novel nanometer silica desorption reagent reducing the damage of hydroxypropyl guar gum to sandstone reservoir

Peng Shi et al.

Summary: The use of NSDR to reduce the adsorption damage of hydroxypropyl guar gum to sandstone reservoirs was studied. It was found that NSDR can disrupt the adsorption force between the guar gum and rock, improving pore throat structure and enhancing the stimulation effect of the reservoir.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Engineering, Chemical

Nanocellulose-regulated robust particle-gel for conformance improvement in fractured tight reservoirs: A mechanistic investigation of transport behavior and EOR performance in fracture models

Runxue Mao et al.

Summary: The mechanical properties of particle gel were significantly improved due to the interpenetration of high-modulus nanocellulose into polyacrylamide. Five transport patterns in fractures were identified based on the particle/aperture ratio. A numerical model was established to correlate the stable pressure drop of nanocellulose-regulated particle gel with four critical operating parameters. The injection of particle gel greatly improved the conformance of fractured cores and resulted in additional oil recoveries.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Application of Renewable Natural Materials for Gas and Water Shutoff Processes in Oil Wells

Valery Meshalkin et al.

Summary: A complex sealing compound based on natural materials processing was proposed to enhance the efficiency of shutoff operations. The mechanical activation processes were studied to investigate their influence on the mechanical and rheological properties of the developed sealants. The researchers successfully produced hybrid sealants by combining activated rice husks with mechanically activated peat.

ENERGIES (2022)

Add to Collection

Article Polymer Science

A Thermal-Responsive Zwitterionic Polymer Gel as a Filtrate Reducer for Water-Based Drilling Fluids

Kaihe Lv et al.

Summary: This study successfully synthesized a copolymer gel, PAND, with temperature and salt stimulus response characteristics for water-based drilling fluid. The PAND solution exhibited exceptional rheological and filtration properties even under high temperature and high salinity conditions. It has excellent potential for application in deep and ultra-deep drilling engineering.

GELS (2022)

Add to Collection

Review Polymer Science

Polymer Gels Used in Oil-Gas Drilling and Production Engineering

Jinliang Han et al.

Summary: This article provides a systematic review of the research progress on the application of polymer gels in oil-gas drilling and production engineering, including the gel compositions, crosslinking principles, and properties of different types of polymer gels. The advantages and disadvantages of these polymer gels are comparatively discussed, and the types, characteristics, and action mechanisms of polymer gels used in oil-gas drilling and production engineering are analyzed. The research potential of polymer gels in meeting future technical requirements is also proposed.

GELS (2022)

Add to Collection

Article Energy & Fuels

Salt Deposits and Brine Blowout: Development of a Cross-Linking Composition for Blocking Formations and Methodology for Its Testing

Mikhail Dvoynikov et al.

Summary: This article focuses on the development of a polymeric-blocking composition for preventing blow-outs during drilling. Based on experimental studies, the optimal component polymer composition was determined, along with its rheological properties and penetration depth.

ENERGIES (2022)

Add to Collection

Article Physics, Fluids & Plasmas

Barite-Free Muds for Drilling-in the Formations with Abnormally High Pressure

Ekaterina Leusheva et al.

Summary: This paper discusses the problems associated with water-based drilling fluids used for drilling formations with abnormally high pressure and proposes a new type of drilling mud based on saturated brines. By studying the composition formulation of saturated brines and the rheological properties and thermal stability of the drilling muds, the results show that the proposed drilling fluids can efficiently be used for formations with abnormally high pressure.

FLUIDS (2022)

Add to Collection

Article Polymer Science

Novel Acrylamide/2-Acrylamide-2-3 Methylpropanesulfonic Acid/Styrene/Maleic Anhydride Polymer-Based CaCO3 Nanoparticles to Improve the Filtration of Water-Based Drilling Fluids at High Temperature

Zhichuan Tang et al.

Summary: Filtration loss control under high temperature conditions is a worldwide issue in water-based drilling fluids. A core-shell high-temperature filter reducer (PAASM-CaCO3) was developed by combining organic macromolecules with inorganic nanomaterials, resulting in improved high-temperature resistance and filtration control.

GELS (2022)

Add to Collection

Review Polymer Science

Status and Prospect of Drilling Fluid Loss and Lost Circulation Control Technology in Fractured Formation

Jingbin Yang et al.

Summary: This paper systematically summarizes the drilling fluid loss mechanism and model in fractured formation, analyzes the mechanism and main influencing factors to improve the formation's pressure-bearing capacity, and introduces the properties and interaction mechanism of various types of lost circulation materials.

GELS (2022)

Add to Collection

Article Polymer Science

Experimental Study on Physicochemical Properties of a Shear Thixotropic Polymer Gel for Lost Circulation Control

Jingbin Yang et al.

Summary: This study investigated the physical and chemical properties of a shear thixotropic polymer gel system using rheological tests. The results showed that the gel system had anti-dilution, high temperature resistance, and high salt resistance. The gel formed under a mixture of heavy salt water and white oil and maintained its stable structure and morphology. The gel formation time could be controlled and had good injection performance under specific conditions. The gel also exhibited high temperature and high salt resistance and a stable three-dimensional reticular space skeleton. These findings are important for the practical application of shear thixotropic polymer gel systems.

GELS (2022)

Add to Collection

Review Energy & Fuels

A comprehensive review of in-situ polymer gel simulation for conformance control

Baojun Bai et al.

Summary: This paper provides a comprehensive review of current numerical simulation studies on gel treatment in mature oilfields. It identifies the problems in existing simulation studies and suggests future research directions. The review highlights the importance of considering important mechanisms and accurately evaluating the performance of in-situ gel treatment.

PETROLEUM SCIENCE (2022)

Add to Collection

Article Engineering, Petroleum

Effect of Nanoparticle Shape on Viscoelastic Surfactant Performance at High Temperatures

Ahmed Hanafy et al.

Summary: This study investigated the interaction between Viscoelastic surfactants (VESs) and different shaped nanoparticles to reduce VES loadings and enhance their thermal stability. The addition of nanoparticles extended the thermal stability of VES fluids, enhanced proppant-carrying capacity, and reduced fluid loss and formation damage.

SPE JOURNAL (2021)

Add to Collection

Article Energy & Fuels

Dependence of the Equivalent Circulation Density of Formate Drilling Fluids on the Molecular Mass of the Polymer Reagent

Ekaterina Leusheva et al.

Summary: Construction of offshore gas wells requires special drilling mud to protect the permeability of the reservoir. Research shows that a high-density drilling mud based on formates can replace barite to maintain the permeability of the productive formation.

ENERGIES (2021)

Add to Collection

Article Chemistry, Physical

Application of gemini viscoelastic surfactant with high salt in brine-based fracturing fluid

Tao Xu et al.

Summary: A novel viscoelastic surfactant VES-Q with high salt tolerance was successfully synthesized in this study, which can be used to prepare clean fracturing fluids that meet the requirements of hydraulic fracturing operations.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Energy & Fuels

Well Killing Technology before Workover Operation in Complicated Conditions

Dmitry Mardashov et al.

Summary: The killing of wells is an important technological stage before workover operations, aimed at preserving and restoring the natural filtration characteristics of the bottomhole formation zone (BFZ). The choice of well killing technologies is crucial in complex conditions like low reservoir pressure, high oil-gas ratio, and carbonate reservoirs. Experimental studies have shown that the developed well killing and stimulation fluids can improve oil production rates, reduce start-up time for wells, and decrease water cut of formation fluid.

ENERGIES (2021)

Add to Collection

Review Energy & Fuels

Water shutoff and conformance improvement: an introduction

Randy Seright et al.

Summary: This paper introduces the topics of water shutoff and conformance improvement, covering strategies for addressing excess water production, the concept of disproportionate permeability reduction, and the properties of formed gels as they extrude through fractures.

PETROLEUM SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Salinity- and Heat-Tolerant VES (Viscoelastic Surfactant) Clean Fracturing Fluids Strengthened by a Hydrophobic Copolymer with Extremely Low Damage

Jizhen Tian et al.

Summary: The study found that both zwitterionic and cationic surfactants exhibit strong salt tolerance in high-salinity aqueous solutions, contributing to the preparation of clean fracturing fluids. Additionally, the addition of hydrophobic associating polymers can improve the temperature resistance and maintain viscosity of fracturing fluids.

CHEMISTRYSELECT (2021)

Add to Collection

Article Energy & Fuels

Gelation kinetics of PAM/PEI based drilling mud for lost circulation applications

Musaab Magzoub et al.

Summary: The study investigates the gelation kinetics of PAM/PEI cross-linkable polymer for enhancing wellbore stability in drilling fluids formulations. Different combinations of polymers and crosslinkers were evaluated, resulting in a gel mud formulation with thermal stability and flexibility to seal near wellbore fractures effectively. The produced gel showed promising results under high-temperature-high-pressure reservoir conditions, indicating improved wellbore strengthening.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Decision-Making Techniques for Water Shutoff Using Random Forests and Its Application in High Water Cut Reservoirs

Khwaja Naweed Seddiqi et al.

Summary: The study investigates decision-making for water shutoff in oil fields using a machine learning model, identifying a more effective selection of wells using a new algorithm, and comparing the results through numerical simulation.

ACS OMEGA (2021)

Add to Collection

Article Mining & Mineral Processing

Development of blocking compositions with a bridging agent for oil well killing in conditions of abnormally low formation pressure and carbonate reservoir rocks

Dmitrii Mardashov

Summary: Killing production wells in late-stage oil and gas fields before workover operations can be complicated by various factors, such as low formation pressure, carbonate reservoir rocks, and high gas-oil ratio. Developing high-performance well-killing compositions is crucial to improving efficiency in complex geological, physical, and technological conditions by preventing gas intake and outflow from the formation.

JOURNAL OF MINING INSTITUTE (2021)

Add to Collection

Article Energy & Fuels

Hooked gemini viscoelastic surfactant based on linolenic oil for oil recovery and its various gel-breaking mechanisms

Chen Wang et al.

Summary: Hooked gemini viscoelastic surfactant (HGVES) outperformed gemini viscoelastic surfactant (GVES) in terms of fracturing performance, with lower critical micelle concentrations and better viscoelastic behavior. The support suspension performance decreased with temperature, and HGVES showed no residue in all gel-breaking solutions, indicating its potential for enhanced oil recovery.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Performance Evaluation of Enzyme Breaker for Fracturing Applications under Simulated Reservoir Conditions

Yuling Meng et al.

Summary: This study demonstrated that mannanase II is an effective enzyme breaker for fracturing operations in alkaline and medium-temperature reservoirs. Mannanase II showed excellent gel-breaking performance, while requiring only one fifth of the concentration needed for other enzyme breakers. Additionally, it had minimal adverse effects on the fracturing fluid's performance and generated significantly lower residue compared to other breaker additives.

MOLECULES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Computer Modeling of the Integrated Chemical Engineering Process of Water Shutoff of High-Water-Cut Oil-Bearing Porous Rock Formations

V. P. Meshalkin et al.

Summary: A three-dimensional computer model was developed for the integrated chemical engineering process of water shutoff of a high-water-cut oil-bearing rock formation. This model helps determine the parameters of filling of pores with the water shutoff solution, necessary for calculating the well's oil and water production rates. The adequacy of the developed mathematical model was verified through a comparative analysis, showing mean absolute errors in oil production rate and water cut of 0.5 t/day and 0.9%, respectively.

DOKLADY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

pH-responsive viscoelastic supramolecular viscosifiers based on dynamic complexation of zwitterionic octadecylamidopropyl betaine and triamine for hydraulic fracturing applications

Shuhao Liu et al.

Summary: The newly developed zwitterionic viscosifiers exhibit reversible adjustment of static viscosity and significantly reduce proppant settling velocity, with pH affecting their viscosity performance.

RSC ADVANCES (2021)

Add to Collection

Review Energy & Fuels

Loss circulation in drilling and well construction: The significance of applications of crosslinked polymers in wellbore strengthening: A review

Musaab Magzoub et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Effect of propylene glycol substituted group on salt tolerance of a cationic viscoelastic surfactant and its application for brine-based clean fracturing fluid

Wenlong Zhang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advances in ionic liquids as alternative to surfactants/chemicals for application in upstream oil industry

Achinta Bera et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

A Novel Solution for Severe Loss Prevention While Drilling Deep Wells

Salaheldin Elkatatny et al.

SUSTAINABILITY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

The Synthesis of Polymeric Nanospheres and the Application as High-Temperature Nano-Plugging Agent in Water Based Drilling Fluid

He Li et al.

FRONTIERS IN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Organic

High Performance Hydrophobic Associated Polymer for Fracturing Fluids with Low-Dosage

Yang Shao et al.

PETROLEUM CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Development and Performance Evaluation of a High-Temperature Profile Control System

Chunsheng Wang et al.

ACS OMEGA (2020)

Add to Collection

Article Polymer Science

Experimental Investigation and Performance Evaluation of Modified Viscoelastic Surfactant (VES) as a New Thickening Fracturing Fluid

Z. H. Chieng et al.

POLYMERS (2020)

Add to Collection

Article Energy & Fuels

A Comprehensive method to evaluate the viscous slickwater as fracturing fluids for hydraulic fracturing applications

Jie Wang et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

Thermo -elastic and self -healing polyacrylamide-2D nanofiller composite hydrogels for water shutoff treatment

Feven Mattews Michael et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

Novel gemini surfactant as a clay stabilizing additive in fracturing fluids for unconventional tight sandstones: Mechanism and performance

Zeeshan Tariq et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Polymer Science

Insights on Potential Formation Damage Mechanisms Associated with the Use of Gel Breakers in Hydraulic Fracturing

Tariq Almubarak et al.

POLYMERS (2020)

Add to Collection

Article Energy & Fuels

Rheological and breaking characteristics of Zr-crosslinked gum karaya gels for high-temperature hydraulic fracturing application

Geetanjali Chauhan et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Chemistry, Applied

Development of a Stimuli-Responsive Gemini Zwitterionic Viscoelastic Surfactant for Self-Diverting Acid

Wenlong Zhang et al.

JOURNAL OF SURFACTANTS AND DETERGENTS (2019)

Add to Collection

Article Energy & Fuels

Experimental Evaluation of Oxidizing Breakers for a Polyacrylamide-Based Re-Crosslinkable Preformed Particle Gel

Ze Wang et al.

ENERGY & FUELS (2019)

Add to Collection

Article Chemistry, Applied

Reducing adsorption of hydroxypropyl guar gum on sandstone by silicon nanoparticles

Yang Li et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Wormlike Micelles of a Cationic Surfactant in Polar Organic Solvents: Extending Surfactant Self-Assembly to New Systems and Subzero Temperatures

Niti R. Agrawal et al.

LANGMUIR (2019)

Add to Collection

Article Engineering, Chemical

Development of a sulfonic gemini zwitterionic viscoelastic surfactant with high salt tolerance for seawater-based clean fracturing fluid

Wenlong Zhang et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Add to Collection

Article Energy & Fuels

Adsorption damage of hydroxypropyl guar gum to porous media composed of quartz

Shibin Wang et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

The effects of small molecule organic additives on the self-assembly and rheology of betaine wormlike micellar fluids

Thomas M. McCoy et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Network-gel strength relationship and performance improvement of polyacrylamide hydrogel using nano-silica; with regards to application in oil wells conditions

Camellia Zareie et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Engineering, Environmental

Chemical Degradation of Polyacrylamide during Hydraulic Fracturing

Boya Xiong et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Energy & Fuels

Experimental Investigation on Damage Mechanism of Guar Gum Fracturing Fluid to Low-Permeability Reservoir Based on Nuclear Magnetic Resonance

Tiankui Guo et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Dissymmetric beauty: A novel design of heterogemini viscoelastic surfactant for the clean fracturing fluid

Jincheng Mao et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)

Add to Collection

Article Energy & Fuels

Effect of salt on the performance of drag reducers in slickwater fracturing fluids

T. C. Nguyen et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Polymer Science

High Performance Clean Fracturing Fluid Using a New Tri-Cationic Surfactant

Jinzhou Zhao et al.

POLYMERS (2018)

Add to Collection

Article Energy & Fuels

Numerical simulation study to understand the performance of RPM gels in water-shutoff treatments

Dheiaa Alfarge et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Chemistry, Applied

Synthesis of Polyacrylamide Gels for Restricting the Water Inflow in Development of Oil Fields

F. E. Safarov et al.

RUSSIAN JOURNAL OF APPLIED CHEMISTRY (2018)

Add to Collection

Article Polymer Science

Study of a Novel Gemini Viscoelastic Surfactant with High Performance in Clean Fracturing Fluid Application

Wenlong Zhang et al.

POLYMERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of Amphiphilic Polymer/Nano-Silica Composite on Shale Stability for Water-Based Muds

Zhengsong Qiu et al.

APPLIED SCIENCES-BASEL (2018)

Add to Collection

Article Energy & Fuels

Reduced adsorption of polyacrylamide-based fracturing fluid on shale rock using urea

Yang Li et al.

ENERGY SCIENCE & ENGINEERING (2018)

Add to Collection

Article Energy & Fuels

Nanocellulose: Extraction and application

Patchiya Phanthong et al.

CARBON RESOURCES CONVERSION (2018)

Add to Collection

Review Engineering, Biomedical

Cellulose-based hydrogel materials: chemistry, properties and their prospective applications

S. M. Fijul Kabir et al.

PROGRESS IN BIOMATERIALS (2018)

Add to Collection

Article Polymer Science

Enzymatic degradation of polyacrylamide in aqueous solution with peroxidase and H2O2

William J. R. Gilbert et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Add to Collection

Article Polymer Science

Self-assembly properties of ultra-long-chain gemini surfactant with high performance in a fracturing fluid application

Chunpeng Yang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Add to Collection

Review Energy & Fuels

Polymer Gel Systems for Water Management in High-Temperature Petroleum Reservoirs: A Chemical Review

Daoyi Zhu et al.

ENERGY & FUELS (2017)

Add to Collection

Article Energy & Fuels

Study on a Novel Cross-Linked Polymer Gel Strengthened with Silica Nanoparticles

Yifei Liu et al.

ENERGY & FUELS (2017)

Add to Collection

Article Energy & Fuels

Numerical simulation study of factors affecting relative permeability modification for water-shutoff treatments

Dheiaa K. Alfarge et al.

FUEL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Structure and Rheology of Wormlike Micelles Formed by Fluorocarbon-Hydrocarbon-Type Hybrid Gemini Surfactant in Aqueous Solution

Ken Morishima et al.

LANGMUIR (2017)

Add to Collection

Article Chemistry, Applied

Effect of pH on the rheological properties of borate crosslinked hydroxypropyl guar gum hydrogel and hydroxypropyl guar gum

Shibin Wang et al.

CARBOHYDRATE POLYMERS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Hydrogels based on cellulose and chitin: fabrication, properties, and applications

Xiaoping Shen et al.

GREEN CHEMISTRY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A novel strengthened dispersed particle gel for enhanced oil recovery application

Caili Dai et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2016)

Add to Collection

Article Polymer Science

Performance and field implementation of a new fracturing fluid consisting of hydrophobically associating polyacrylamide and anionic surfactant

Zhongcong Zhao et al.

JOURNAL OF POLYMER ENGINEERING (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A novel gemini viscoelastic surfactant (VES) for fracturing fluids with good temperature stability

Jincheng Mao et al.

RSC ADVANCES (2016)

Add to Collection

Article Energy & Fuels

Behavior of Titania Nanoparticles in Cross-linking Hydroxypropyl Guar Used in Hydraulic Fracturing Fluids For Oil Recovery

Thomas Hurnaus et al.

ENERGY & FUELS (2015)

Add to Collection

Article Energy & Fuels

Ultrastable Hydrogel for Enhanced Oil Recovery Based on Double-Groups Cross-Linking

Lifeng Chen et al.

ENERGY & FUELS (2015)

Add to Collection

Article Chemistry, Physical

Self-assembly networks of wormlike micelles and hydrophobically modified polyacrylamide with high performance in fracturing fluid application

Fu Chen et al.

COLLOID AND POLYMER SCIENCE (2015)

Add to Collection

Review Engineering, Environmental

Biocides in Hydraulic Fracturing Fluids: A Critical Review of Their Usage, Mobility, Degradation, and Toxicity

Genevieve A. Kahrilas et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Elastic and Superstretchable Graphene Oxide/Polyacrylamide Hydrogels

Huai-Ping Cong et al.

SMALL (2014)

Add to Collection

Article Engineering, Petroleum

Laboratory Characterization of Gel Filter Cake and Development of Nonoxidizing Gel Breakers for Zirconium-Crosslinked Fracturing Fluids

B. R. Reddy

SPE JOURNAL (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Revealing Strong Nanocomposite Hydrogels Reinforced by Cellulose Nanocrystals: Insight into Morphologies and Interactions

Jun Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Add to Collection

Article Chemistry, Applied

Preparation and characterization of nano-cellulose with new shape from different precursor

Sonakshi Maiti et al.

CARBOHYDRATE POLYMERS (2013)

Add to Collection

Article Chemistry, Physical

Stretchable and Self-Healing Graphene Oxide-Polymer Composite Hydrogels: A Dual-Network Design

Huai-Ping Cong et al.

CHEMISTRY OF MATERIALS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Nanocellulose: a new ageless bionanomaterial

Alain Dufresne

MATERIALS TODAY (2013)

Add to Collection

Article Polymer Science

Linear viscoelasticity and dynamics of suspensions and molten polymers filled with nanoparticles of different aspect ratios

Philippe Cassagnau

POLYMER (2013)

Add to Collection

Review Chemistry, Applied

Microfibrillated cellulose - Its barrier properties and applications in cellulosic materials: A review

Nathalie Lavoine et al.

CARBOHYDRATE POLYMERS (2012)

Add to Collection

Review Chemistry, Multidisciplinary

Cellulose nanomaterials review: structure, properties and nanocomposites

Robert J. Moon et al.

CHEMICAL SOCIETY REVIEWS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-Driven Viscoelastic Wormlike Micelle in Anionic/Zwitterionic Surfactant Systems and Template-Directed Synthesis of Dendritic Silver Nanostructures

Yan Qiao et al.

LANGMUIR (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Novel cationic gemini surfactants as corrosion inhibitors for carbon steel pipelines

M. A. Hegazy et al.

CORROSION SCIENCE (2010)

Add to Collection

Article Polymer Science

Superabsorbent hydrogels based on cellulose for smart swelling and controllable delivery

Chunyu Chang et al.

EUROPEAN POLYMER JOURNAL (2010)

Add to Collection

Article Polymer Science

Solution properties of anionic hydrophobic association polyacrylamide modified with fluorinated acrylate

Yang Xiaowu et al.

JOURNAL OF POLYMER RESEARCH (2010)

Add to Collection

Article Energy & Fuels

Applied Technologies and Prospects of Conformance Control Treatments in China

Yuzhang Liu et al.

OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2010)

Add to Collection

Article Energy & Fuels

Improved oil recovery of high-viscosity oil pools with physicochemical methods and thermal-steam treatments

L. K. Altunina et al.

OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Wormlike micelles of a C22-tailed zwitterionic betaine surfactant: From viscoelastic solutions to elastic gels

Rakesh Kumar et al.

LANGMUIR (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Effects of organic salt additives on the behavior of dimeric (Gemini) Surfactants in aqueous solution

Laurent Wattebled et al.

LANGMUIR (2007)

Add to Collection

Article Energy & Fuels

Successful field pilot of in-depth colloidal dispersion gel (CDG) technology in Daqing oil field

Harry L. Chang et al.

SPE RESERVOIR EVALUATION & ENGINEERING (2006)

Add to Collection

Article Chemistry, Physical

Bonding between polyacrylamide and smectite

YJ Deng et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2006)

Add to Collection

Article Energy & Fuels

A review of thermally stable gels for fluid diversion in petroleum production

A Moradi-Araghi

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2000)

Add to Collection

Article Chemistry, Physical

Novel approaches to cross-linking high molecular weight polysaccharides: Application to guar-based hydraulic fracturing fluids

PV Coveney et al.

MOLECULAR SIMULATION (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.