Related references
Note: Only part of the references are listed.
Article
Energy & Fuels
Kunyang Yu et al.
Summary: This paper presents a novel strategy for concrete curing using solar thermal energy storage based on phase change material (PCM), aiming to prevent frost damage to concrete at an early stage and promote rapid concrete strength growth in cold climates. The proposed method utilizes the latent heat of the thermal energy storage layer (TESL) containing PCM to continuously cure the concrete at a positive temperature, with a transparent insulation layer (TIL) to absorb thermal energy through solar radiation. The study also proposes a numerical method for designing the TESL under different climatic conditions, with an optimal thickness ranging from 0.87 cm to 4.86 cm. Experimental results demonstrate that the concrete specimens cured using this strategy achieve excellent temperature history and reach the design strength in just 60 hours. Economic evaluation results show that the proposed curing method is cost-effective and provides significant energy saving and emission reduction throughout the service cycle. This work provides an efficient and clean solution for rapid concrete construction in cold climates.
Article
Materials Science, Multidisciplinary
Binglin Xie et al.
Summary: Modern AI-assisted approaches have revolutionized our understanding of concrete and composite materials. This study introduces self-supervised learning (SSL) to overcome the limitation of labeled data in concrete material characterization. A generalized SSL-based framework is proposed, which demonstrates its robustness and ability to predict concrete properties with minimal data. The SSL model achieves comparable performance to supervised learning with only 5% of the data, and it is also easy to implement.
COMPUTATIONAL MATERIALS SCIENCE
(2023)
Article
Construction & Building Technology
Minfei Liang et al.
Summary: This study aims to predict the creep behavior of concrete using machine learning techniques, specifically EML models such as RF, XGBoost, and LGBM, with high accuracy achieved through Bayesian Optimization and cross-validation. The SHAP values highlight the significant influence of parameters like time, compressive strength, age, humidity, and temperature on concrete creep compliance, indicating the reasonableness of the EML model predictions.
CEMENT & CONCRETE COMPOSITES
(2022)
Article
Chemistry, Physical
Hamza Imran et al.
Summary: Concrete is widely used but recognized as a pollutant. This research focuses on developing a prediction model for the compressive strength of eco-friendly concrete. A machine learning model called multivariate polynomial regression (MPR) outperforms other models in terms of accuracy measurements.
Article
Neuroimaging
Alessia Sarica et al.
Summary: This study used a machine learning algorithm, Explainable Boosting Machine (EBM), to classify Parkinson's disease and scans without evidence of dopaminergic deficit (SWEDD) and provide interpretable results. It also identified some factors for predicting these two diseases.
BRAIN IMAGING AND BEHAVIOR
(2022)
Article
Construction & Building Technology
Panagiotis G. Asteris et al.
Summary: A model for estimating the compressive strength of concretes incorporating metakaolin was developed and evaluated using soft computing techniques. The model took into account six parameters as input data and was able to accurately estimate the compressive strength, considering the usage of metakaolin. The study highlighted the nonlinear influence of mix components on the resulting concrete compressive strength.
CONSTRUCTION AND BUILDING MATERIALS
(2022)
Article
Green & Sustainable Science & Technology
Xin Liu et al.
Summary: This study quantifies the coupling impacts of multiple factors, including traffic, meteorology, and built environment, on particle distributions at urban neighborhood scales. It reveals that vertical PM concentrations are significantly higher at 9-18 m above ground level. The background concentration, traffic volume, and street morphology are identified as the top three important features. The coupling effects of selected features contribute to 8.9% of PM concentrations. This research provides insights into source identification of particles and improving livability and sustainability in urban residential areas.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Engineering, Civil
Rupesh Kumar Tipu et al.
Summary: The use of machine learning and deep learning models to predict the properties of concrete is a promising field of research. This study developed a distinctive deep learning model based on an ensemble technique to accurately forecast the compressive strength of high-performance concrete. The ensemble model achieved a significant improvement in accuracy compared to a single model, and identified key factors that influence concrete strength.
Proceedings Paper
Engineering, Electrical & Electronic
Li Xiaolin et al.
Summary: This paper presents an explainable and low-complexity binary ECG classifier for resource-limited wearable edge devices. The classifier, based on Explainable Boosting Machine (EBM), achieves high accuracy and interpretability by using limited ECG features and a decision tree structure.
2022 29TH IEEE INTERNATIONAL CONFERENCE ON ELECTRONICS, CIRCUITS AND SYSTEMS (IEEE ICECS 2022)
(2022)
Article
Computer Science, Interdisciplinary Applications
Jin Duan et al.
Summary: Recycled aggregate concrete is being researched using artificial intelligence techniques to assess its compressive strength, with the ICA-XGBoost model proving to be the most effective among the developed models. This model can be utilized in construction engineering to ensure adequate mechanical performance and safe usage of recycled aggregate concrete for building purposes.
ENGINEERING WITH COMPUTERS
(2021)
Article
Computer Science, Artificial Intelligence
Danial Jahed Armaghani et al.
Summary: This study investigates the use of artificial intelligence techniques to predict the compressive strength of cement-based mortars. Both ANN and ANFIS models were found to reliably approximate the strength of mortars, with ANFIS outperforming ANN but showing signs of overfitting during verification. The developed ANN model was introduced as the best predictive technique for solving the problem of mortar compressive strength.
NEURAL COMPUTING & APPLICATIONS
(2021)
Article
Construction & Building Technology
Min-Chang Kang et al.
Summary: Research developed a machine learning algorithm for predicting the compressive and flexural strengths of steel fiber-reinforced concrete, identifying water-to-cement ratio and silica fume content as the most influential factors on compressive strength, and silica fume and fiber volume fraction as the most influential factors on flexural strength.
CONSTRUCTION AND BUILDING MATERIALS
(2021)
Article
Construction & Building Technology
Ngoc-Hien Nguyen et al.
Summary: The paper proposed a general semi-empirical formula involving nondimensionalization and optimization techniques for predicting compressive strength of concrete with universal capacity. This method successfully addressed the issue of machine learning algorithms not showing explicit relationships between concrete strength and mixture proportions.
CONSTRUCTION AND BUILDING MATERIALS
(2021)
Article
Construction & Building Technology
Hongwei Song et al.
Summary: This study focused on predicting the compressive strength of concrete containing fly ash using machine learning approaches. Different supervised learning algorithms were utilized, with the bagging algorithm showing the highest accuracy in prediction. Experimental data was used to validate the models, demonstrating high precision in forecasting the compressive strength.
CONSTRUCTION AND BUILDING MATERIALS
(2021)
Article
Engineering, Civil
Panagiotis G. Asteris et al.
Summary: Masonry, a building material with a long history, remains competitive in the construction industry. The compressive strength of masonry is crucial in modern design, but estimating it accurately is still a challenge. Soft computing techniques can help identify key parameters affecting masonry compressive strength and offer better estimates than existing formulas.
ENGINEERING STRUCTURES
(2021)
Article
Construction & Building Technology
De-Cheng Feng et al.
Summary: In this study, an advanced machine learning model was trained and interpreted for estimating the shear strengths of squat RC walls, utilizing a database of 434 samples. The model strategically combined the XGBoost algorithm for predictive modeling and the SHAP algorithm for analyzing factor importance. This setup achieved a high level of accuracy in shear strength estimation and provided physical and quantitative interpretations of the input-output dependencies.
JOURNAL OF STRUCTURAL ENGINEERING
(2021)
Article
Environmental Sciences
Sarmad Dashti Latif
Summary: Compressive strength is a critical parameter in concrete design, and measuring it correctly can reduce time and cost. Research shows that a model predicting concrete compressive strength utilizing a detailed dataset and deep learning methods can be effective.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
(2021)
Article
Computer Science, Artificial Intelligence
Zebin Yang et al.
Summary: The paper introduces an explainable neural network model GAMI-Net, which aims to balance prediction accuracy and model interpretability. The model consists of multiple additive subnetworks for capturing main effects and pairwise interactions, while considering interpretability aspects such as sparsity, heredity, and marginal clarity, and uses an adaptive training algorithm.
PATTERN RECOGNITION
(2021)
Article
Environmental Sciences
Aaron E. Maxwell et al.
Summary: This study evaluates the performance of Explainable Boosting Machines (EBMs) in predicting the likelihood of slope failure in different regions of West Virginia, showing comparable predictive accuracy to Random Forest and Support Vector Machine, and better accuracy than Logistic Regression and k-Nearest Neighbors. EBM provides interpretability through generated functions and visualizations, but more research is needed to understand the impact of factors such as variable correlation and inclusion of interaction terms on the outputs.
Article
Construction & Building Technology
Junhong Ye et al.
Summary: The study found that the printed UHDC with a fiber content of 1.5% exhibited better workability and mechanical properties, as well as reduced material cost.
CONSTRUCTION AND BUILDING MATERIALS
(2021)
Article
Construction & Building Technology
Bochao Sun et al.
Summary: This study revealed that environmental conditions have a significant impact on the early strength of cement mortar, but good curing treatment can enhance the quality of the surface layer of mortar. The research indicated that the current maturity formula considering only temperature may overestimate mortar strength, while a proposed RH-modified maturity method can accurately predict mortar strength. Surface curing techniques were found to play a crucial role in the strength development of mortars, particularly in the surface layer.
CONSTRUCTION AND BUILDING MATERIALS
(2021)
Article
Engineering, Civil
De-Cheng Feng et al.
Summary: This paper introduces a practical and comprehensive implementation of ensemble methods for predicting the shear strength of deep beams with or without web reinforcements. The study utilizes four typical ensemble machine learning models and demonstrates their superior performance over traditional machine learning methods in predicting accuracy and discrepancy.
ENGINEERING STRUCTURES
(2021)
Article
Engineering, Civil
Jesika Rahman et al.
Summary: This study presents a data-driven approach to estimating the shear strength of steel fiber reinforced concrete beams, utilizing machine learning models. Among the 11 evaluated models, XGBoost demonstrated the most accurate predictions. Additionally, the study identified the most influential parameters affecting the shear strength of SFRC beams.
ENGINEERING STRUCTURES
(2021)
Article
Construction & Building Technology
De-Cheng Feng et al.
CONSTRUCTION AND BUILDING MATERIALS
(2020)
Article
Construction & Building Technology
Rong Cai et al.
CEMENT AND CONCRETE RESEARCH
(2020)
Article
Chemistry, Physical
Shasha Lu et al.
Article
Construction & Building Technology
Bochao Sun et al.
STRUCTURAL CONCRETE
(2020)
Review
Construction & Building Technology
Wassim Ben Chaabene et al.
CONSTRUCTION AND BUILDING MATERIALS
(2020)
Article
Engineering, Civil
Faezehossadat Khademi et al.
FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING
(2017)
Article
Biochemical Research Methods
Andre Altmann et al.
Article
Computer Science, Artificial Intelligence
Mathias M. Adankon et al.
PATTERN RECOGNITION
(2009)
Article
Construction & Building Technology
I-Cheng Yeh
JOURNAL OF MATERIALS IN CIVIL ENGINEERING
(2006)
Article
Computer Science, Artificial Intelligence
Y Bengio
NEURAL COMPUTATION
(2000)
