4.6 Article

Energy-Level Alignment Governs Doping-Related Fermi-Level Shifts in Polymer Films

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Critical dopant concentrations govern integer and fractional charge-transfer phases in doped P3HT

Hannes Hase et al.

Summary: During the doping process of P3HT with F4TCNQ and its derivatives, we observed the competition between ion-pair formation and charge-transfer complex formation. The critical dopant concentration plays a key role in determining the occurrence of these two phenomena.

JOURNAL OF PHYSICS-MATERIALS (2023)

Article Chemistry, Multidisciplinary

Sterically-Hindered Molecular p-Dopants Promote Integer Charge Transfer in Organic Semiconductors

Somaiyeh Charoughchi et al.

Summary: This study demonstrates that the detrimental effect of planarity in molecular p-dopants can be overcome by targeted design exploiting steric hindrance, resulting in enhanced doping efficiency and increased thin film conductivity.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Review Physics, Applied

Molecular doping principles in organic electronics: fundamentals and recent progress

Tae Hoon Kim et al.

Summary: Molecular doping of organic semiconductors is widely used in organic electronics to modulate charge transport and carrier concentration. Understanding the doping mechanism, materials, methodologies, and post-doping properties is crucial. This report reviews the fundamentals, dopant types, methods, and practical applications in organic transistors, photovoltaics, and thermoelectrics. Efficient strategies for molecular doping may overcome the trade-off between device performance and structural disorder.

JAPANESE JOURNAL OF APPLIED PHYSICS (2023)

Article Materials Science, Multidisciplinary

Chemical Defects and Energetic Disorder Impact the Energy-Level Alignment of Functionalized Hexaazatriphenylene Thin Films

Li Zhang et al.

Summary: The energy-level alignment (ELA) at interfaces plays a crucial role in organic optoelectronic applications by determining the device performance. The ELA at organic-inorganic interfaces in organic thin films is influenced by gap states and/or tailing states of the frontier molecular orbitals. The susceptibility of conjugated organic materials to chemical and structural defects is highlighted as a key factor in the ELA at interfaces.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2023)

Article Chemistry, Multidisciplinary

Unlocking the Full Potential of Electron-Acceptor Molecules for Efficient and Stable Hole Injection

Taku Oono et al.

Summary: Understanding and improving hole-injection mechanism is crucial for the development of organic optoelectronic devices. By controlling the charged state of an electron-acceptor molecule, efficient and stable hole injection can be achieved, enabling the realization of a pure blue organic light-emitting diode with low turn-on voltage, high power efficiency, and high quantum efficiency.

ADVANCED MATERIALS (2023)

Article Chemistry, Physical

Photoelectron Spectroscopy Reveals the Impact of Solvent Additives on Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) Thin Film Formation

Yuan Zhang et al.

Summary: In this study, PEDOT:PSS thin films with seven different additive combinations were prepared and their properties were analyzed. It was found that the work function of the thin films became saturated at a thickness of around 50 nm, and thinner films exhibited lower work function due to incomplete coverage on the ITO substrate. The PSS-to-PSSH ratio showed better correlation with the work function than the commonly used PSS-to-PEDOT ratio. Solvent additives dramatically increased the conductivity of the PEDOT:PSS films, especially when DMSO was involved. Additionally, the surfactant Triton helped to suppress the work function fluctuation and weaken the surface dipole, resulting in a lower and thickness-independent work function.

ACS PHYSICAL CHEMISTRY AU (2023)

Review Chemistry, Multidisciplinary

Doping Approaches for Organic Semiconductors

Alberto D. Scaccabarozzi et al.

Summary: This article reviews the important advances in organic semiconductor doping and its applications. It discusses the relevant physical processes, established mechanisms, and newly proposed theories. It also provides a comprehensive summary of the most widely studied dopants to date, with a particular focus on the chemical strategies for synthesizing molecules with improved functionality. The article further explores the processing routes for doped organic films and the important relationships between doping, processing, and nanostructure. Lastly, it highlights how doping can enhance the operating characteristics of various organic devices.

CHEMICAL REVIEWS (2022)

Article Chemistry, Physical

Conjugated polymers with controllable interfacial order and energetics enable tunable heterojunctions in organic and colloidal quantum dot photovoltaics

Yufei Zhong et al.

Summary: Conjugated polymers exhibit significant variations in interfacial ionization energy due to differences in terminal molecular ordering between top and bottom surfaces, impacting the performance of organic and hybrid photovoltaic devices. Wet and dry lamination strategies can be utilized to form planar heterojunction devices, allowing for meaningful influence over open circuit voltage. Controlled intermixing approach leveraging disordered interface and donor aggregation can lead to superior device performance compared to conventional bulk heterojunction devices. Proper control over polymer surface properties is essential for improving charge extraction in photovoltaic devices.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Physical

Electronic properties of the Poly(3-hexylthiophene)/MoS2 interfaces: The influence of the substrate

Charalampos Drivas et al.

Summary: This study investigated the electronic properties of interfaces between MoS2 and in-situ thermally deposited P3HT using photoelectron spectroscopies. The P3HT was found to be aligned vertically to the MoS2 basal plane, with interface energy diagrams showing a hole barrier and an interface dipole. Gap states were observed in the CVD prepared MoS2, which were found to affect device performance and should be considered.

APPLIED SURFACE SCIENCE (2022)

Article Chemistry, Multidisciplinary

The Energy Level Conundrum of Organic Semiconductors in Solar Cells

Jules Bertrandie et al.

Summary: The study investigates the energy levels of 33 organic semiconductors using multiple techniques and explores their impact on the performance of solar cells. The findings reveal that high-performing systems have significant ionization energy offsets, and vanishing ionization energy offsets are detrimental to device performance.

ADVANCED MATERIALS (2022)

Article Chemistry, Physical

Interface energetics make devices

Steffen Duhm

Summary: This focus article presents best practice rules for drawing energy-level diagrams (ELDs) of optoelectronic devices, emphasizing the importance of providing references, mentioning measurement methods, adding disclaimers, and measuring as many energy levels as possible.

ELECTRONIC STRUCTURE (2022)

Article Chemistry, Physical

A unified secondary electron cut-off presentation and common mistakes in photoelectron spectroscopy

Thorsten Schultz

Summary: This article addresses common mistakes and best practices in photoelectron spectroscopy, including proper presentation of secondary electron cutoff, correct binding energy referencing, appropriate peak fitting techniques, and valuable literature references. Additionally, a concise step-by-step guide on conducting a complete X-ray photoelectron spectroscopy analysis of an unknown sample is provided.

ELECTRONIC STRUCTURE (2022)

Review Chemistry, Multidisciplinary

Chemical approaches for electronic doping in photovoltaic materials beyond crystalline silicon

Xueyuan Wei et al.

Summary: This review summarizes the development and application of electronic doping technology, focusing on the use of chemical approaches in electronic doping. New classifications and models based on the properties of dopants are proposed, which inspire further development in the field of optoelectronics.

CHEMICAL SOCIETY REVIEWS (2022)

Article Materials Science, Multidisciplinary

Advanced characterization of organic-metal and organic-organic interfaces: from photoelectron spectroscopy data to energy-level diagrams

Qi Wang et al.

Summary: Organic-metal and organic-organic interfaces play a crucial role in the functionality of organic optoelectronic applications. Accurate estimation of energy-level alignment is challenging due to various interfacial effects. XPS and UPS measurements provide guidelines for interpreting the energy-level alignment of these interfaces.

JOURNAL OF PHYSICS-MATERIALS (2022)

Article Materials Science, Multidisciplinary

Doping of semicrystalline conjugated polymers: dopants within alkyl chains do it better

Massimiliano Comin et al.

Summary: Depending on the sample preparation protocol, doped semi-crystalline polymers can have different structures, leading to different charge-transport and thermoelectric properties. In this study, accurate hybrid quantum-classical calculations were used to explore the intricate relationship between structure and properties, taking into account the effect of the environment. The findings reveal that the position of dopants in the polymer lamellae significantly affects their electron affinity, and the orbital overlap between dopants in different regions of the polymer determines the charge-transfer states. Moreover, the interaction between the charge carrier and the ionized dopants is influenced by the dopant position.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Article Chemistry, Multidisciplinary

Mapping the Density of States Distribution of Organic Semiconductors by Employing Energy Resolved-Electrochemical Impedance Spectroscopy

Heinz Baessler et al.

Summary: The study employs ER-EIS technique to investigate the DOS distributions of HOMO and LUMO states in organic semiconductors, revealing Gaussian-shaped cores with low energy tails in neat and blended films. Comparison between ER-EIS and PE/IPE spectra of P3HT suggests an overestimation of distribution width by a factor of 2-3 in the latter. Additionally, DOS width is found to increase in blends of MeLPPP and SF-PDI2 or PC(61)BM compared to neat films.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Controlling the Formation of Charge Transfer Complexes in Chemically Doped Semiconducting Polymers

Dane A. Stanfield et al.

Summary: The study focuses on the chemical doping of conjugated polymers and demonstrates how adjusting the casting solvent for the dopant can control the formation of charge transfer complexes (CTCs) and integer charge transfer (ICT). By using different solvent blends, the relative amount of CTCs between P3HT and F(4)TCNQ can be readily controlled, and even in high-crystallinity materials, fractional charge transfer still occurs to some extent.

CHEMISTRY OF MATERIALS (2021)

Article Materials Science, Multidisciplinary

Disentangling Bulk and Interface Phenomena in a Molecularly Doped Polymer Semiconductor

Dominique Lungwitz et al.

Summary: Doping the electron-transport polymer with a reducing metallocene leads to increased bulk conductivity and decreased contact resistance. Accumulation of dopant molecules on the substrate reduces the work function, minimizing the electron injection barrier. Understanding the effects of electrode modification by the dopant and bulk doping is crucial for comprehensively understanding doped organic semiconductors.

ADVANCED OPTICAL MATERIALS (2021)

Article Physics, Applied

Doping-related broadening of the density of states governs integer-charge transfer in P3HT

Hannes Hase et al.

Summary: This study investigates the role of density of states (DOS) width in the doping process of P3HT by doping with TCNQ derivatives of different electron affinities. It was found that dopants with larger DOS widths can affect the results of integer and fractional charge transfer, leading to varying changes in the conductivity of P3HT.

APPLIED PHYSICS LETTERS (2021)

Article Chemistry, Applied

Electronic structure engineering in organic thermoelectric materials

Xiaojuan Dai et al.

Summary: This review focuses on the regulation of electronic structures of organic materials for efficient thermoelectric conversion. Rational design and precise modulation of electronic structures have shown great potential in exploring state-of-the-art organic thermoelectric materials.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Physical

Ultra-Narrow-Band NIR Photomultiplication Organic Photodetectors Based on Charge Injection Narrowing

Ming Liu et al.

Summary: Ultra-narrow-band NIR organic photodetectors with photomultiplication capabilities were developed by narrowing charge injection using interfacial traps. By incorporating BEH and F(6)TCNNQ into the active layers, high EQE values at 850 nm were achieved with improved rejection ratios.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Article Physics, Applied

Enhanced carrier injection hotspot effect by direct and simple ITO surface engineering

Hui-Hui Jiang et al.

Summary: Appropriate Ar plasma treatment on ITO surface can induce small-sized and dense injection hotspots, achieving efficient electron injection and playing a critical role in organic electronic devices.

APPLIED PHYSICS LETTERS (2021)

Review Materials Science, Multidisciplinary

The Many Facets of Molecular Orientation in Organic Optoelectronics

Alexander Hofmann et al.

Summary: Organic optoelectronics have become a mature technology with a wide range of applications over the years. Organic semiconductors have distinct molecular orientation degrees of freedom that allow for unique customization of their properties in thin-film structures. This article reviews the various aspects of molecular orientation on fundamental behaviors and discusses its implications for device applications.

ADVANCED OPTICAL MATERIALS (2021)

Article Physics, Applied

Opportunities for energy level tuning at inorganic/organic semiconductor interfaces

Norbert Koch

Summary: This Perspective provides an overview of approaches to tune the energy level alignment at interfaces between inorganic and organic semiconductors, including tailoring intramolecular dipolar bond distribution, controlling molecular orientation, and inserting molecularly thin interlayers. These methods can vary the frontier energy levels at an inorganic/organic heterojunction and create unconventional and dynamically switchable interfacial energy level scenarios for expanded or superior device functionality.

APPLIED PHYSICS LETTERS (2021)

Review Materials Science, Multidisciplinary

Mechanisms for doped PEDOT:PSS electrical conductivity improvement

Nur'Aishah Ahmad Shahrim et al.

Summary: This study focuses on increasing the electrical conductivity and efficiency of PEDOT:PSS by preparing doped PEDOT:PSS through different methods and systematically discussing various primary parameters that affect its conductivity. By analyzing remarkable studies over the past decade, the potential applications of doped PEDOT:PSS in bioelectronics and other fields are demonstrated.

MATERIALS ADVANCES (2021)

Article Chemistry, Physical

A time and resource efficient machine learning assisted design of non-fullerene small molecule acceptors for P3HT-based organic solar cells and green solvent selection

Asif Mahmood et al.

Summary: This study aims to predict the performance of P3HT based organic solar cells through machine learning models, selecting molecular descriptors with positive impact on PCE for better prediction, and providing new insights for material design and candidate selection.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

Spontaneous interface engineering for dopant-free poly(3-hexylthiophene) perovskite solar cells with efficiency over 24%

Min Ju Jeong et al.

Summary: By incorporating gallium(iii) acetylacetonate into organic hole-transporting materials without additional surface treatment processes, the interface engineering strategy efficiently reduces the recombination loss and enhances the performance of perovskite solar cells. This method significantly improves the power conversion efficiency of PSCs and maintains stability without hygroscopic additives, showing a promising route for high performance and commercialization.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Approaching the Integer-Charge Transfer Regime in Molecularly Doped Oligothiophenes by Efficient Decarboxylative Cross-Coupling

Jiang Tian Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

An Organic Borate Salt with Superior p-Doping Capability for Organic Semiconductors

Berthold Wegner et al.

ADVANCED SCIENCE (2020)

Article Materials Science, Multidisciplinary

Quantitative predictions of photoelectron spectra in amorphous molecular solids from multiscale quasiparticle embedding

Gianluca Tirimbo et al.

PHYSICAL REVIEW B (2020)

Article Chemistry, Physical

Stability of Charge Transfer States in F4TCNQ-Doped P3HT

Kristen E. Watts et al.

CHEMISTRY OF MATERIALS (2019)

Article Materials Science, Multidisciplinary

Predicting the yield of ion pair formation in molecular electrical doping: redox-potentials versus ionization energy/electron affinity

Berthold Wegner et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Chemistry, Multidisciplinary

Polymorphism controls the degree of charge transfer in a molecularly doped semiconducting polymer

Ian E. Jacobs et al.

MATERIALS HORIZONS (2018)

Review Physics, Applied

Origin and role of gap states in organic semiconductor studied by UPS: as the nature of organic molecular crystals

Jin-Peng Yang et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

Review Chemistry, Multidisciplinary

Molecular Electrical Doping of Organic Semiconductors: Fundamental Mechanisms and Emerging Dopant Design Rules

Ingo Salzmann et al.

ACCOUNTS OF CHEMICAL RESEARCH (2016)

Article Physics, Condensed Matter

Pentacene on Au(111), Ag(111) and Cu(111): From physisorption to chemisorption

Meng-Chao Lu et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2016)

Article Chemistry, Multidisciplinary

The Optical Signature of Charges in Conjugated Polymers

Georg Heimel

ACS CENTRAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Band-Like Electron Transport with Record-High Mobility in the TCNQ Family

Yulia Krupskaya et al.

ADVANCED MATERIALS (2015)

Review Spectroscopy

Toward a comprehensive understanding of molecular doping organic semiconductors (review)

Ingo Salzmann et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2015)

Article Physics, Applied

Injection barrier at metal/organic semiconductor junctions with a Gaussian density-of-states

Sungyeop Jung et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2015)

Article Multidisciplinary Sciences

Charge-transfer crystallites as molecular electrical dopants

Henry Mendez et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Multidisciplinary

Probing the energy levels in hole-doped molecular semiconductors

Stefanie Winkler et al.

MATERIALS HORIZONS (2015)

Article Chemistry, Multidisciplinary

Characterization of the Polymer Energy Landscape in Polymer:Fullerene Bulk Heterojunctions with Pure and Mixed Phases

Sean Sweetnam et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Multidisciplinary Sciences

Organic semiconductor density of states controls the energy level alignment at electrode interfaces

Martin Oehzelt et al.

NATURE COMMUNICATIONS (2014)

Article Materials Science, Multidisciplinary

Comprehensive picture of p-type doping of P3HT with the molecular acceptor F4TCNQ

P. Pingel et al.

PHYSICAL REVIEW B (2013)

Review Chemistry, Physical

Design of Organic Semiconductors from Molecular Electrostatics

Georg Heimel et al.

CHEMISTRY OF MATERIALS (2011)

Article Physics, Applied

Capacitive behavior of pentacene-based diodes: Quasistatic dielectric constant and dielectric strength

Chang Hyun Kim et al.

JOURNAL OF APPLIED PHYSICS (2011)

Article Chemistry, Physical

Effect of annealing on the electronic structure of poly(3-hexylthiophene) thin film

Kaname Kanai et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2010)

Article Materials Science, Multidisciplinary

Energetics of excited states in the conjugated polymer poly(3-hexylthiophene)

Carsten Deibel et al.

PHYSICAL REVIEW B (2010)

Article Materials Science, Multidisciplinary

Determination of electron affinity of electron accepting molecules

Kaname Kanai et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)

Review Chemistry, Multidisciplinary

Development of experimental methods for determining the electronic structure of organic materials

Kazuhiko Seki et al.

MOLECULAR CRYSTALS AND LIQUID CRYSTALS (2006)