4.6 Article

Thermal Shock Life Prediction of the SiC Wide Bandgap Power Module Semiconductor Package Considering Creep Behavior of the Ag Sintered Interconnect and Viscoelastic Properties of the Epoxy Molding Compound

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Creep behaviour of alloy 690 in the temperature range 800-1000 °C

Kumar Sourabh et al.

Summary: The creep behavior of Ni-base superalloy 690 was studied under constant load creep conditions at temperatures ranging from 800 to 1000 ℃ and stresses ranging from 25 to 105 MPa. The alloy exhibited power-law creep behavior and followed the Monkman-Grant relationship. The majority of creep data points fell within a +/- 5% scatter band on the Larson Miller parameter vs. log stress plot. The alloy underwent more than 50% of its life in the tertiary creep regime and predominantly failed due to cavitation. The apparent activation energy and stress exponent of creep were relatively high.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Article Engineering, Electrical & Electronic

Effect of cure shrinkage of epoxy molding compound on warpage behavior of semiconductor package

Jeong-Hyeon Baek et al.

Summary: In this study, the cure shrinkage, internal strain development, and viscoelastic properties of epoxy molding compound (EMC) for semiconductor packaging were investigated using fiber Bragg grating (FBG) and dielectric sensors. The warpage of EMC-aluminum bi-layer strip was measured using digital image correlation (DIC). The results confirmed the importance of considering the cure shrinkage of EMC in predicting the warpage behavior of semiconductors.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2022)

Article Materials Science, Multidisciplinary

Combination of thermal cycling and vibration loading effects on the fatigue life of solder joints in a power module

Davood Ghaderi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2019)

Article Materials Science, Multidisciplinary

Indentation hardness, plasticity and initial creep properties of nanosilver sintered joint

Hao Zhang et al.

RESULTS IN PHYSICS (2019)

Review Materials Science, Multidisciplinary

A critical review of experimental aspects in ratcheting fatigue: microstructure to specimen to component

Surajit Kumar Paul

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Article Engineering, Electrical & Electronic

Interference source analysis and EMC design for All-SiC power module in EV charger

Zhijun Li et al.

MICROELECTRONICS RELIABILITY (2019)

Article Engineering, Electrical & Electronic

An Integrated SiC CMOS Gate Driver for Power Module Integration

Matthew Barlow et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

Article Engineering, Electrical & Electronic

Thermal Stability of Silver Paste Sintering on Coated Copper and Aluminum Substrates

Chun Pei et al.

JOURNAL OF ELECTRONIC MATERIALS (2018)

Article Engineering, Electrical & Electronic

Effect of solder layer thickness on thermo-mechanical reliability of a power electronic system

A. Surendar et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Materials Science, Multidisciplinary

Experimental investigation of span length for flexural test of fiber reinforced polymer composite laminates

Akhil Mehndiratta et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)

Article Engineering, Electrical & Electronic

Mechanical Deformation of Sintered Porous Ag Die Attach at High Temperature and Its Size Effect for Wide-Bandgap Power Device Design

Chuantong Chen et al.

JOURNAL OF ELECTRONIC MATERIALS (2017)

Article Engineering, Electrical & Electronic

High-Temperature Electrical and Thermal Aging Performance and Application Considerations for SiC Power DMOSFETs

Dean P. Hamilton et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

An Investigation of Temperature-Sensitive Electrical Parameters for SiC Power MOSFETs

Jose Ortiz Gonzalez et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

Article Engineering, Mechanical

Fatigue behavior of Ti-6A1-4V ELI including mean stress effects

Patricio E. Carrion et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Article Automation & Control Systems

Temperature and Switching Rate Dependence of Crosstalk in Si-IGBT and SiC Power Modules

Saeed Jahdi et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2016)

Article Engineering, Electrical & Electronic

Solder fatigue failures in a new designed power module under Power Cycling

C. Durand et al.

MICROELECTRONICS RELIABILITY (2016)

Review Engineering, Electrical & Electronic

Creep fatigue models of solder joints: A critical review

E. H. Wong et al.

MICROELECTRONICS RELIABILITY (2016)

Article Materials Science, Characterization & Testing

Flexural and tensile moduli of flexible FR4 substrates

Tae-Ik Lee et al.

POLYMER TESTING (2016)

Article Engineering, Manufacturing

Warpage Simulation of a Multilayer Printed Circuit Board and Microelectronic Package Using the Anisotropic Viscoelastic Shell Modeling Technique That Considers the Initial Warpage

Do-Hyoung Kim et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2016)

Article Engineering, Electrical & Electronic

Future Prospects of Widebandgap (WBG) Semiconductor Power Switching Devices

Krishna Shenai

IEEE TRANSACTIONS ON ELECTRON DEVICES (2015)

Article Engineering, Electrical & Electronic

High Junction Temperature and Low Parasitic Inductance Power Module Technology for Compact Power Conversion Systems

Satoshi Tanimoto et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2015)

Article Engineering, Electrical & Electronic

A High Temperature Silicon Carbide MOSFET Power Module With Integrated Silicon-On-Insulator-Based Gate Drive

Zhiqiang Wang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

Article Engineering, Chemical

Fatigue behaviour of epoxy-steel single lap joints under variable frequency

P. N. B. Reis et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2015)

Article Engineering, Electrical & Electronic

Investigation of multilayer printed circuit board (PCB) film warpage using viscoelastic properties measured by a vibration test

Sung-Jun Joo et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2015)

Article Materials Science, Multidisciplinary

Selected Topics on Material Strength and Thermally Activated Deformation Processes

Masaharu Kato

MATERIALS TRANSACTIONS (2015)

Proceedings Paper Engineering, Multidisciplinary

Probabilistic Model of Mean Stress Effects in Strain-Life Fatigue

Nicole Apetre et al.

ICSI 2015 THE 1ST INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY FUNCHAL (2015)

Article Engineering, Electrical & Electronic

A 3600 V/80 A Series-Parallel-Connected Silicon Carbide MOSFETs Module With a Single External Gate Driver

Xinke Wu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2014)

Article Engineering, Electrical & Electronic

Mechanical Properties of Sintered Ag as a New Material for Die Bonding: Influence of the Density

V. Caccuri et al.

JOURNAL OF ELECTRONIC MATERIALS (2014)

Article Engineering, Electrical & Electronic

Fatigue and dwell-fatigue behavior of nano-silver sintered lap-shear joint at elevated temperature

Yansong Tan et al.

MICROELECTRONICS RELIABILITY (2014)

Article Engineering, Electrical & Electronic

Fatigue Reliability Analysis of Sn-Ag-Cu Solder Joints Subject to Thermal Cycling

F. X. Che et al.

IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY (2013)

Article Nanoscience & Nanotechnology

Creep properties of low-temperature sintered nano-silver lap shear joints

Xin Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Materials Science, Multidisciplinary

Current Status and Emerging Trends in Wide Bandgap (WBG) Semiconductor Power Switching Devices

Krishna Shenai et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2013)

Article Engineering, Electrical & Electronic

High-Temperature Creep Behavior of Low-Temperature-Sintered Nano-Silver Paste Films

Gang Chen et al.

JOURNAL OF ELECTRONIC MATERIALS (2012)

Article Engineering, Electrical & Electronic

Built-in EMC for Integrated Power Electronics Systems

Jean-Luc Schanen et al.

EPE JOURNAL (2011)

Article Engineering, Mechanical

A modification of Morrow and Smith-Watson-Topper mean stress correction models

A. Ince et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2011)

Article Chemistry, Multidisciplinary

Relating Rates of Catalyst Sintering to the Disappearance of Individual Nanoparticles during Ostwald Ripening

Sivakumar R. Challa et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Article Engineering, Mechanical

Mean stress effects in strain-life fatigue

N. E. Dowling

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)

Article Engineering, Mechanical

Mean stress effects in stress-life fatigue and the Walker equation

N. E. Dowling et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)

Article Engineering, Industrial

Thermo-fatigue life evaluation of SnAgCu solder joints in flip chip assemblies

Xiaoyan Li et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

Article Engineering, Mechanical

A practical method for statistical analysis of strain-life fatigue data

CR Williams et al.

INTERNATIONAL JOURNAL OF FATIGUE (2003)

Article Engineering, Electrical & Electronic

Effect of solder creep on the reliability of large area die attachment

WD Zhuang et al.

MICROELECTRONICS RELIABILITY (2001)

Article Materials Science, Multidisciplinary

Strain-life fatigue predictions for sintered steels with nonzero mean stress

ES Palma et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2000)