☆ 4.8 Article

Beneficial impact of lithium bis(oxalato)borate as electrolyte additive for high-voltage nickel-rich lithium-battery cathodes

INFOMAT (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Unraveling the Dynamic Interfacial Behavior of LiCoO2 at Various Voltages with Lithium Bis(oxalato)borate for Lithium-Ion Batteries

Meihua Hong et al.

Summary: The electrochemical behavior of SEI formed by LiBOB on LCO is investigated at different cutoff voltages. LiBOB can suppress side reactions by forming SEI, but the SEI decomposes at high voltages, causing a decrease in electrochemical performance.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Elucidating the Effect of Borate Additive in High-Voltage Electrolyte for Li-Rich Layered Oxide Materials

Yixuan Li et al.

Summary: This study reports the use of lithium bis-(oxalate)borate (LiBOB) as an electrolyte additive to improve the cycling stability in high voltage lithium-rich layered oxide (LRLO)/graphite full cells. The cell with LiBOB-containing electrolyte exhibits high initial capacity and no capacity decay or voltage fade after multiple cycles.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Energy & Fuels

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

Laidong Zhou et al.

Summary: A series of new lithium mixed-metal chlorospinels are reported as solid electrolytes for all-solid-state lithium batteries, which exhibit high ionic conductivity and low electronic conductivity, showing potential for high-performance all-solid-state lithium batteries.

NATURE ENERGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Formation of LiF-rich Cathode-Electrolyte Interphase by Electrolyte Reduction

Panxing Bai et al.

Summary: The capacity of Li-ion battery cathodes can be improved by increasing the charging potential, but this often leads to fast capacity decay. In this study, a LiF-rich CEI was formed to enhance the structural integrity of the cathode and suppress electrolyte penetration. The LiCoO2 cathode with LiF-rich CEI showed improved capacity retention and longer cycle life compared to the LiF-free LiCoO2 cathode.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Electrochemistry

Enhancing the Interfacial Stability of High-Energy Si/Graphite | | LiNi0.88Co0.09Mn0.03O2 Batteries Employing a Dual-Anion Ionic Liquid-based Electrolyte

Shan Fang et al.

Summary: A dual-anion electrolyte based on a poorly flammable room-temperature ionic liquid has been found to exhibit stable performance in lithium-ion cells, suppressing electrode material degradation and electrolyte decomposition. This electrolyte shows significantly improved cycling stability and high energy density, demonstrating the potential for safe and high-energy lithium-ion batteries.

BATTERIES & SUPERCAPS (2022)

Add to Collection

Article Engineering, Environmental

Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+- conductor coating

Sidra Jamil et al.

Summary: The Ni-rich layered oxide cathode material, LiNi0.87Co0.1Al0.03O2, modified with amorphous Li+-ion conductor Li2O-BPO4 coating, shows improved cycling stability and rate capability, making it a promising candidate for high-voltage applications in lithium ion batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Synergistic electrolyte additives for enhancing the performance of high-voltage lithium-ion cathodes in half-cells and full-cells

Arefeh Kazzazi et al.

Summary: The research addresses the insufficient stability of the electrolyte towards oxidation in high-voltage lithium-ion cathode materials, and introduces a new combination of electrolyte additives to improve battery performance. The synergistic effect of TTSPi and TFEC additives significantly enhances cycling stability, capacity, and coulombic efficiency in lithium-ion cells with a voltage higher than 4.5 V, which can be further improved with the addition of lithium bis(oxalato)borate.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Phase Behavior during Electrochemical Cycling of Ni-Rich Cathode Materials for Li-Ion Batteries

Chao Xu et al.

Summary: The essay explores the rapid performance degradation of layered lithium nickel-rich oxides under specific stress conditions, comparing their structural properties with NMCs and NCAs. It highlights the necessity of reexamining the various high-voltage structural changes in LiNiO2 to aid understanding of accelerated degradation in Ni-rich cathodes.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Fangyuan Cheng et al.

Summary: The study shows that detrimental effects on the electrochemical performances of high-capacity nickel-rich layered oxide cathode LiNi0.8Co0.1Mn0.1O2 can be limited by forming a uniform inorganic/polymer cathode-electrolyte interface (CEI) through in-situ electrochemical oxidation of trace dual additives in traditional carbonate-based electrolytes. This CEI film not only eliminates adverse cathode-electrolyte interface reactions and prevents electrolyte penetration into grain boundaries, but also inhibits the formation of inactive rock salt phase on the material surface.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

An Interfacial Mechanism of Chelate-Borate Electrolyte Additives in Ni-Rich LiNi0.8Mn0.1Co0.1O2 Cathodes

Shuxiang Wen et al.

Summary: The study shows that by introducing LiBOB and LiODFB electrolyte additives, the electrolyte layer of the sodium-ion battery’s cathode material NMC811 can be optimized, reducing the dissolution of transition metal ions and promoting the diffusion and transport of lithium ions.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte

Weijiang Xue et al.

Summary: The authors have developed a sulfonamide-based electrolyte that allows for stable cycling of LiNi0.8Co0.1Mn0.1O2 in lithium metal batteries at a cutoff voltage of 4.7 V, achieving a specific capacity >230 mA h g(-1) and an average Coulombic efficiency >99.65% over 100 cycles. The 4.7 V lithium-metal battery can retain >88% capacity for 90 cycles even under harsh testing conditions, advancing practical lithium-metal batteries.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Cycle parameter dependent degradation analysis in automotive lithium-ion cells

Mathias Storch et al.

Summary: This study investigates the degradation mechanisms in cycled large-format automotive lithium-ion cells, focusing on gas formation, lithium plating, SEI growth, and transition metal dissolution. Higher temperatures and cut-off voltages intensify SEI growth, while transition metal dissolution is observed. High depth of discharge leads to the loss of cathode active material. Variations in discharge current do not affect the degradation mechanisms in cells cycled at 20% depth of discharge.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

Tao Deng et al.

Summary: The study addresses the challenges faced by CPEs in SSLBs through the design of a LiF-rich SEI, which improves ionic conductivity and oxidation stability while reducing interfacial resistance and allowing for high critical current density. The fabricated SSLBs show exceptional electrochemical performance and long cycling stability, demonstrating the potential for this SEI design approach to be applied to other battery types.

CHEM (2021)

Add to Collection

Article Chemistry, Physical

Dual-anion ionic liquid electrolyte enables stable Ni-rich cathodes in lithium-metal batteries

Fanglin Wu et al.

Summary: The use of a dual-anion ionic liquid electrolyte enables high electrochemical performance in lithium-metal batteries, with high initial capacity and outstanding cycling stability.

JOULE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanism Study of Unsaturated Tripropargyl Phosphate as an Efficient Electrolyte Additive Forming Multifunctional Interphases in Lithium Ion and Lithium Metal Batteries

Yunxian Qian et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Facile and efficient fabrication of Li3PO4-coated Ni-rich cathode for high-performance lithium-ion battery

Pinjuan Zou et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Regulating Surface and Grain-Boundary Structures of Ni-Rich Layered Cathodes for Ultrahigh Cycle Stability

Xu Cheng et al.

SMALL (2020)

Add to Collection

Review Chemistry, Physical

Ni-Rich/Co-Poor Layered Cathode for Automotive Li-Ion Batteries: Promises and Challenges

Xinxin Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

High-nickel layered oxide cathodes for lithium-based automotive batteries

Wangda Li et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Armoring LiNi1/3Co1/3Mn1/3O2 Cathode with Reliable Fluorinated Organic-Inorganic Hybrid Interphase Layer toward Durable High Rate Battery

Chen Yu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

High-Voltage-Driven Surface Structuring and Electrochemical Stabilization of Ni-Rich Layered Cathode Materials for Li Rechargeable Batteries

Seok Hyun Song et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enabling Stable High-Voltage LiCoO2Operation by Using Synergetic Interfacial Modification Strategy

Xuerui Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Long-Term Cyclability of NCM-811 at High Voltages in Lithium-Ion Batteries: an In-Depth Diagnostic Study

Wangda Li et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

An In Situ Formed Surface Coating Layer Enabling LiCoO2with Stable 4.6 V High-Voltage Cycle Performances

Yi Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

In-situ construction of hierarchical cathode electrolyte interphase for high performance LiNi0.8Co0.1Mn0.1O2/Li metal battery

Min Mao et al.

NANO ENERGY (2020)

Add to Collection

Review Electrochemistry

Degradation Mechanisms and Mitigation Strategies of Nickel-Rich NMC-Based Lithium-Ion Batteries

Tianyu Li et al.

ELECTROCHEMICAL ENERGY REVIEWS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium bis(oxalate)borate additive in the electrolyte to improve Li-rich layered oxide cathode materials

Zi Xiao et al.

MATERIALS CHEMISTRY FRONTIERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Phase Transformation Behavior and Stability of LiNiO2 Cathode Material for Li-Ion Batteries Obtained from InSitu Gas Analysis and Operando X-Ray Diffraction

Lea de Biasi et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Chemistry, Physical

Quaternary Layered Ni-Rich NCMA Cathode for Lithium-Ion Batteries

Un-Hyuck Kim et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Toward a durable solid electrolyte film on the electrodes for Li-ion batteries with high performance

Weimin Zhao et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Elucidating the Effect of Iron Doping on the Electrochemical Performance of Cobalt-Free Lithium-Rich Layered Cathode Materials

Fanglin Wu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries

Tao Deng et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Suppressing detrimental phase transitions via tungsten doping of LiNiO2 cathode for next-generation lithium-ion batteries

Hoon-Hee Ryu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Enabling High-Voltage Lithium-Metal Batteries under Practical Conditions

Xiaodi Ren et al.

JOULE (2019)

Add to Collection

Article Electrochemistry

High-Energy Nickel-Rich Layered Cathode Stabilized by Ionic Liquid Electrolyte

Ashley Heist et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

High Voltage Operation of Ni-Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases

Wengao Zhao et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Effect of calcination temperature on the electrochemical properties of nickel-rich LiNi0.76Mn0.14Co0.10O2 cathodes for lithium-ion batteries

Jianming Zheng et al.

NANO ENERGY (2018)

Add to Collection

Article Energy & Fuels

Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries

Pengfei Yan et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Variation of Electronic Conductivity within Secondary Particles Revealing a Capacity-Fading Mechanism of Layered Ni-Rich Cathode

Jae-Hyung Kim et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

High Voltage LiNi0.5Mn0.3Co0.2O2/Graphite Cell Cycled at 4.6 V with a FEC/HFDEC-Based Electrolyte

Meinan He et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Tunable and Robust Phosphite-Derived Surface Film to Protect Lithium-Rich Cathodes in Lithium-Ion Batteries

Jung-Gu Han et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries

Wen Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Article Electrochemistry

Synergistic Effects of Suberonitrile-LiBOB Binary Additives on the Electrochemical Performance of High-Voltage LiCoO2 Electrodes

Yajuan Ji et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application

Xifei Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Interfacial Origin of Performance Improvement and Fade for 4.6 V LiNi0.5Co0.2Mn0.3O2 Battery Cathodes

Yu-Mi Lee et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

Add to Collection

Article Chemistry, Physical

Enhancement of high voltage cycling performance and thermal stability of LiNi1/3Co1/3Mn1/3O2 cathode by use of boron-based additives

Lingling Zhang et al.

SOLID STATE IONICS (2014)

Add to Collection

Article Chemistry, Physical

A Novel Surface Treatment Method and New Insight into Discharge Voltage Deterioration for High-Performance 0.4Li2MnO3-0.6LiNi1/3Co1/3Mn1/3O2 Cathode Materials

Pilgun Oh et al.

ADVANCED ENERGY MATERIALS (2014)

Add to Collection

Article Electrochemistry

Electrolyte additive combinations that enhance performance of high-capacity Li1.2Ni0.15Mn0.55Co0.1O2-graphite cells

Ye Zhu et al.

ELECTROCHIMICA ACTA (2013)

Add to Collection

Software Review Chemistry, Multidisciplinary

GSAS-II: the genesis of a modern open-source all purpose crystallography software package

Brian H. Toby et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2013)

Add to Collection

Article Electrochemistry

Improving the Performance of Graphite/ LiNi/0.5Mn1.5O4 Cells at High Voltage and Elevated Temperature with Added Lithium Bis(oxalato) Borate (LiBOB)

Mengqing Xu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

Effect of Added LiBOB on High Voltage (LiNi0.5Mn1.5O4) Spinel Cathodes

Swapnil Dalavi et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2012)

Add to Collection

Article Chemistry, Physical

A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu

Stefan Grimme et al.

JOURNAL OF CHEMICAL PHYSICS (2010)

Add to Collection

Article Chemistry, Physical

Imidazolium ionic liquids containing LiBOB electrolyte for lithium battery

Hidesato Saruwatari et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Chemistry, Physical

Thermal and electrochemical characterization of MCMB/LiNi1/3Co1/3Mn1/3O2 using LiBoB as an electrolyte additive

Wenquan Lu et al.

JOURNAL OF POWER SOURCES (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.