☆ 4.8 Article

Bifunctional trifluorophenylacetic acid additive for stable and highly efficient flexible perovskite solar cell

INFOMAT (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Alkali Additives Enable Efficient Large Area (>55 cm2) Slot-Die Coated Perovskite Solar Modules

Prem Jyoti Singh Rana et al.

Summary: A seed-assisted crystallization approach using alkali salts has been demonstrated to enable the fabrication of large-area and highly crystalline perovskite films. The slot-die coated perovskite films show improved optoelectronic properties and stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic Liquid Treatment for Highest-Efficiency Ambient Printed Stable All-Inorganic CsPbI3 Perovskite Solar Cells

Yachao Du et al.

Summary: The incorporation of a low concentration of a novel ionic liquid successfully improves the defects, energy alignment at the interface, and stability of CsPbI3 perovskite solar cells fabricated via ambient blade-coating. The cells achieve high power conversion efficiency and impressive long-term ambient stability.

ADVANCED MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Centimetre-scale perovskite solar cells with fill factors of more than 86 per cent

Jun Peng et al.

Summary: Perovskite solar cells are at the forefront of emerging photovoltaic technologies due to their rapid development in efficiency and stability. This study introduces a reverse-doping process to fabricate nitrogen-doped titanium oxide electron transport layers, which significantly improves the charge transport performance and fill factor of the cells.

NATURE (2022)

Add to Collection

Article Chemistry, Applied

Post-treatment by an ionic tetrabutylammonium hexafluorophosphate for improved efficiency and stability of perovskite solar cells

Chaoqun Zhang et al.

Summary: Interface engineering with an ionic compound TP6 can effectively reduce surface defects, enhance moisture stability, and increase built-in potential to improve efficiency and stability of perovskite solar cells. The power conversion efficiency of PSCs is significantly improved with TP6 treatment, showing better stability in long-term storage compared to control devices.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Dimethylammonium Addition to Halide Perovskite Precursor Increases Vertical and Lateral Heterogeneity

Sarthak Jariwala et al.

Summary: Adding a large A-site cation such as dimethylammonium (DMA) to the perovskite growth solution has been shown to improve the performance and long-term operational stability of halide perovskite solar cells. Through a series of experiments, it is observed that the incorporation of DMA into the perovskite film leads to local heterogeneity, altering the structure and composition, thereby enhancing performance.

ACS ENERGY LETTERS (2022)

Add to Collection

Review Energy & Fuels

Strategies for Large-Scale Fabrication of Perovskite Films for Solar Cells

Pei Liu et al.

Summary: The development of large-area fabrication of perovskite solar cells is crucial for commercial applications. This review summarizes recent progress in this field, discusses the crystallization mechanism of perovskite films, and provides detailed descriptions on deposition methods and optimization strategies for large-area perovskite films. An outlook for further improvement is also provided.

SOLAR RRL (2022)

Add to Collection

Article Energy & Fuels

Rational Design of Additive with Suitable Functional Groups Toward High-Quality FA0.75MA0.25SnI3 Films and Solar Cells

Minghao Wang et al.

Summary: The introduction of 2-aminophenol and 2-amino-4-fluorophenol improved the film quality of FA(0.75)MA(0.25)SnI(3) perovskite solar cells. The interaction of -NH2 and -OH groups with SnI64- octahedron and fluorinated group with low surface energy contributed to improved film morphology and crystallinity, reducing defect-state density and nonradiative recombination. The hydrophobic feature of C6H6FNO protected the perovskite film from water penetration, leading to long-term stability and high efficiency in PSCs.

SOLAR RRL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Photoinduced Cross Linkable Polymerization of Flexible Perovskite Solar Cells and Modules by Incorporating Benzyl Acrylate

Xinyi Zhu et al.

Summary: A facile internal packaging interface strategy is developed to effectively heal the interface defects and provide airtight protection for perovskite films in flexible solar cells, enhancing their performance and stability. The strategy utilizes a selective light-cured cross-linking molecule. The flexible devices show excellent performance in small size and scalable modules, with good moisture resistance, light soaking resistance, and lead leakage prevention stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Ligand-Anchoring-Induced Oriented Crystal Growth for High-Efficiency Lead-Tin Perovskite Solar Cells

Nan Yan et al.

Summary: The narrow bandgap Pb-Sn alloyed perovskite solar cell with (100) orientation shows significantly reduced trap density and achieves a champion power conversion efficiency of 20.03%. The use of alkyl diamine as a nucleation agent can modulate the growth preference of Pb-Sn perovskite to proceed along the (100) orientation, resulting in improved optoelectronic properties. These findings provide a practicable strategy to induce preferential growth of perovskite material for better performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Efficient, stable formamidinium-cesium perovskite solar cells and minimodules enabled by crystallization regulation

Yiming Li et al.

Summary: Researchers have developed a dual-functional additive that can regulate the crystallization and defects of FA-Cs perovskite film, resulting in improved efficiency and stability of perovskite solar cells.

JOULE (2022)

Add to Collection

Article Energy & Fuels

Ionic Liquid-Tuned Crystallization for Stable and Efficient Perovskite Solar Cells

Junhui Ran et al.

Summary: This study presents a feasible approach to improve the stability of perovskite solar cells by introducing ionic liquid BAAc. Solar cells based on BAAc-containing tri-cation perovskites achieve a high efficiency of over 20%. After aging and storage tests, BAAc-treated devices show better stability.

SOLAR RRL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Revealing Steric-Hindrance-Dependent Buried Interface Defect Passivation Mechanism in Efficient and Stable Perovskite Solar Cells with Mitigated Tensile Stress

Qian Zhou et al.

Summary: In this study, a novel and effective steric-hindrance-dependent buried interface defect passivation and stress release strategy is reported, which utilizes adamantane derivative molecules to modify the SnO2/perovskite interface. The experimental and theoretical results confirm the steric-hindrance-dependent defect passivation effect and interfacial chemical interaction strength. The device performance is enhanced by mitigating interfacial strain and passivating interfacial defects. The ADAA-modified device achieves an impressive efficiency of 23.18%.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Phase-Pure γ-CsPbI3 for Efficient Inorganic Perovskite Solar Cells

Linrui Duan et al.

Summary: This study developed a FAAc-assisted strategy to prepare high-quality γ-CsPbI3 perovskite film and achieved high power conversion efficiency and good stability for the γ-CsPbI3 solar cells.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Rational Surface-Defect Control via Designed Passivation for High-Efficiency Inorganic Perovskite Solar Cells

Xiaojing Gu et al.

Summary: Iodine vacancies and undercoordinated Pb2+ are the main causes of nonradiative charge recombination in all-inorganic perovskite films, while passivation with histamine (HA) significantly reduces surface trap density and prolongs charge lifetime, leading to an increased solar cell efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells with Imidazolium-Based Ionic Liquid for Surface Passivation and Charge Transport

Xuejie Zhu et al.

Summary: In this study, DMIMPF6 ionic liquid was used to passivate surface defects of perovskite, resulting in increased solar cell efficiency and enhanced long-term stability of the device.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Moisture-Resistant FAPbI3 Perovskite Solar Cell with 22.25 % Power Conversion Efficiency through Pentafluorobenzyl Phosphonic Acid Passivation

Erdi Akman et al.

Summary: Perovskite solar cells (PSCs) show great promise for photovoltaic applications due to their low-cost assembly, exceptional performance, and low-temperature solution processing. This study focuses on stabilizing the alpha-FAPbI(3) perovskite phase using PFBPA as a passivation agent, resulting in high-quality and stable PSCs with improved efficiency and long-term stability. The thin PFBPA passivation layer effectively protects the perovskite layer from moisture, maintaining over 90% of the original efficiency under different humidity levels after 600 hours.

CHEMSUSCHEM (2021)

Add to Collection

Article Multidisciplinary Sciences

Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells

Jun Peng et al.

Summary: This research introduces a nanopatterned electron transport layer that overcomes the trade-off between passivation quality and series resistance in traditional polymer passivation layers. Combining the nanopatterned electron transport layer with a dopant-free hole transport layer improves the efficiency and stability of perovskite solar cells.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneously Passivating Cation and Anion Defects in Metal Halide Perovskite Solar Cells Using a Zwitterionic Amino Acid Additive

Ju-Hyeon Kim et al.

Summary: In this study, ionic defects in perovskite solar cells were passivated using a zwitterionic form of the amino acid L-alanine, resulting in increased grain size and carrier lifetime of perovskite crystals. This led to improved power conversion efficiencies for both small-area devices and large-area submodules. Additionally, the approach enhanced the shelf storage and photoirradiation stabilities of the cells.

SMALL (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Energy & Fuels

Efficient and stable MAPbI3 perovskite solar cells achieved via chlorobenzene/perylene mixed anti-solvent

Yang Cao et al.

Summary: In this study, a method using chlorobenzene/perylene mixed anti-solvent to passivate defects in perovskite films is proposed, resulting in a significant improvement in the power conversion efficiency of perovskite solar cells.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal and Humidity Stability of Mixed Spacer Cations 2D Perovskite Solar Cells

Huayang Yu et al.

Summary: By using two different types of spacer cations to prepare perovskite precursor solutions, self-assembled polycrystalline films with improved crystallinity and vertical orientation are obtained, leading to a high power conversion efficiency in solar cells. The mixed spacer cations also enhance interlayer interaction and moisture resistance, resulting in excellent humidity and thermal stability of the devices.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

40.1% Record Low-Light Solar-Cell Efficiency by Holistic Trap-Passivation using Micrometer-Thick Perovskite Film

Xilai He et al.

Summary: Perovskite solar cells show high efficiency in both full sunlight and low-light conditions, with a record efficiency of 40.1% achieved under warm LED light. A holistic passivation strategy reduces trap states in both surface and bulk of the perovskite film, resulting in increased charge carrier lifetimes and decreased nonradiative recombination loss. This work paves the way for high-performance, self-powered IoT devices.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Molten-Salt-Assisted CsPbI3 Perovskite Crystallization for Nearly 20%-Efficiency Solar Cells

Jingru Zhang et al.

Summary: The molten-salt-assisted crystallization (MSAC) strategy improves grain growth of all-inorganic perovskite films by changing the crystallization pathways with the introduction of molten salt. This results in high-quality films with desired optical and electrical properties. Compared to traditional solvent annealing, MSAC enables more intensive mass transfer and higher efficiency in producing films with champion steady-state output efficiency and high open-circuit voltage.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Sulfonate-Assisted Surface Iodide Management for High-Performance Perovskite Solar Cells and Modules

Ruihao Chen et al.

Summary: Surface iodide management using cesium sulfonate can stabilize lead halide perovskite surfaces, reduce surface defects and nonradiative recombination, and improve the efficiency and stability of perovskite solar cells.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Genetic Manipulation of M13 Bacteriophage for Enhancing the Efficiency of Virus-Inoculated Perovskite Solar Cells with a Certified Efficiency of 22.3%

Jiye Han et al.

Summary: In this study, researchers genetically engineered the M13 bacteriophage to enhance its Lewis coordination with perovskite materials, resulting in a more effective application in PSCs. Among the designed amino acid groups, lysine (Lys or K) showed the strongest interaction, leading to a PCE of 23.6% in laboratory testing and a certified efficiency of 22.3% in a national laboratory verification, making it one of the highest efficiencies reported for biomaterial-based PSCs.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Cost-Effective High-Performance Charge-Carrier-Transport-Layer-Free Perovskite Solar Cells Achieved by Suppressing Ion Migration

Tao Ye et al.

Summary: The development of high-performance perovskite solar cells without charge-carrier-transport layers (CTLs) has been achieved by introducing perfluorotetradecanoic acid (PFTeDA) to suppress ion migration and reduce crystal defects in perovskites. The modified carbon-based HTL-free PSC shows a record PCE of 18.9%, with PFTeDA molecules enhancing environmental, thermal, and light stabilities at the grain boundaries between perovskite crystals.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Depth-dependent defect manipulation in perovskites for high-performance solar cells

Yuzhuo Zhang et al.

Summary: A depth-dependent manipulation strategy is demonstrated to concurrently modulate the bulk and interfacial defects in perovskite films, resulting in improved efficiency of PSCs. This strategy provides new insights into spatial defect modulation and may open up promising ways for defect modulator design for highly efficient perovskite optoelectronic devices.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Boosted charge extraction of NbOx-enveloped SnO2 nanocrystals enables 24% efficient planar perovskite solar cells

Ruihan Yuan et al.

Summary: In this study, low-temperature processed SnO2/NbOx nanocrystals were reported as efficient electron transport materials (ETMs) for planar perovskite solar cells (PSCs), achieving an impressive power conversion efficiency (PCE) of 24.01% with remarkable device stability. The NbOx layer passivates defects, promotes charge extraction, and improves perovskite film crystallinity, leading to enhanced device performance. This work provides a facile approach for low-temperature processed ETMs with boosted carrier extraction ability, offering excellent efficiency and stability for planar PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Additive Engineering for Efficient and Stable Perovskite Solar Cells

Fei Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Phosphorus-Containing Lewis Acid and Base Passivation Enabling Efficient and Moisture-Stable Perovskite Solar Cells

Zhi Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Suppressing Vacancy Defects and Grain Boundaries via Ostwald Ripening for High-Performance and Stable Perovskite Solar Cells

Yuqian Yang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Cu2ZnSnS4 as an efficient hole transporting material for low temperature paintable carbon electrode based perovskite solar cells

Yang Cao et al.

ORGANIC ELECTRONICS (2020)

Add to Collection

Article Chemistry, Physical

Vertically Aligned 2D/3D Pb-Sn Perovskites with Enhanced Charge Extraction and Suppressed Phase Segregation for Efficient Printable Solar Cells

Chaohui Li et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Denatured M13 Bacteriophage-Templated Perovskite Solar Cells Exhibiting High Efficiency

Hao-Sheng Lin et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

High-Performance Inverted Perovskite Solar Cells with Operational Stability via n-Type Small Molecule Additive-Assisted Defect Passivation

Donghwan Koo et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Ligand modification of Cu2ZnSnS4 nanoparticles boosts the performance of low temperature paintable carbon electrode based perovskite solar cells to 17.71%

Yang Cao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Passivation Molecular Structures for Extremely Small Open-Circuit Voltage Loss in Perovskite Solar Cells

Shuang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

Add to Collection

Article Optics

Rational molecular passivation for high-performance perovskite light-emitting diodes

Weidong Xu et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Chemistry, Physical

High-Performance Perovskite Solar Cells with Enhanced Environmental Stability Based on a (p-FC6H4C2H4NH3)2[PbI4] Capping Layer

Qin Zhou et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Efficiency Exceeding 20.6% for Inverted Perovskite Solar Cells through Polymer-Optimized PCBM Electron-Transport Layers

Dong Yang et al.

NANO LETTERS (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Energy & Fuels

Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells

Nengxu Li et al.

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Record Efficiency Stable Flexible Perovskite Solar Cell Using Effective Additive Assistant Strategy

Jiangshan Feng et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Design of an Inorganic Mesoporous Hole-Transporting Layer for Highly Efficient and Stable Inverted Perovskite Solar Cells

Yu Chen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Solvent-induced textured structure and improved crystallinity for high performance perovskite solar cells

Wenhui Zhang et al.

OPTICAL MATERIALS EXPRESS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells

Dong Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

High-efficiency robust perovskite solar cells on ultrathin flexible substrates

Yaowen Li et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Energy & Fuels

Defects in perovskite-halides and their effects in solar cells

James M. Ball et al.

NATURE ENERGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Efficient planar heterojunction perovskite solar cells by vapour deposition

Mingzhen Liu et al.

NATURE (2013)

Add to Collection

Article Spectroscopy

Analysis of the infrared and Raman spectra of phenylacetic acid and mandelic (2-hydroxy-2-phenylacetic) acid

Hassan M. Badawi et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.