☆ 4.7 Article

Octadecane-Encapsulated, Polyurethane PolyHIPE Composites with Flexibility and Stretchability for Personal Heat Management

ACS APPLIED POLYMER MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Flexible phase change films with enhanced thermal conductivity and low electrical conductivity for thermal management

Yuang Zhang et al.

Summary: With the continuous miniaturization and integration of electronic devices, more advanced thermal management technology and materials are needed to solve the thermal failure problem. Phase change materials (PCMs) show great potential in electronic thermal management due to their excellent temperature control properties. However, achieving high heat transfer performance and flexibility while maintaining low electrical conductivity in PCMs remains a challenge. In this study, alkylated modified carbon nanotubes (mCNTs) were designed into the phase change polyurethane (PCPU) system. The incorporation of mCNTs resulted in enhanced thermal conductivity and high electrical resistance in PCPU. The PCPU/mCNTs films hold great potential for electronic thermal management.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Nanoscience & Nanotechnology

An innovative modified calcium chloride hexahydrate-based composite phase change material for thermal energy storage and indoor temperature regulation

Ziheng Zeng et al.

Summary: In this study, a modified calcium chloride hexahydrate (CaCl2 center dot 6H(2)O) phase change material (PCM) was prepared with potassium chloride (KCl) as the temperature regulator and strontium hydroxide octahydrate (Sr(OH)(2)center dot 8H(2)O) as the nucleating agent. A shape-stabilized composite PCM suitable for space thermal regulation was prepared by immersing 15 wt% expanded graphite (EG) into 85 wt% modified PCM, with a phase transition temperature of 26.25 degrees C, phase change enthalpy of 153.03 J/g, and a thermal conductivity of 4.3893 W/(mK). The composite PCM showed little change in phase change temperature and only 5.95% loss in enthalpy after 500 heating-cooling cycles. The temperature regulation performance of the composite PCM was evaluated in a test chamber prepared with polyvinyl chloride (PVC) board, maintaining indoor temperature at 24.5-27.5 degrees C for 180 to 652 minutes. This prepared composite PCM can be applied effectively in temperature management of buildings.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2023)

Add to Collection

Article Engineering, Environmental

Flexible phase change composite based on loading paraffin into cross-linked CNT/SBS network for thermal management and thermal storage

Die Hu et al.

Summary: Phase change materials (PCM) have great potential in energy storage, but their brittleness poses a challenge in practical applications. This study presents a flexible PCM composite that has high enthalpy and can be bent and twisted at room temperature, achieved through the use of sulfur cross linkers and carbon nanotubes.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Composites

Flexible and foldable composite films based on polyimide/phosphorene hybrid aerogel and phase change material for infrared stealth and thermal camouflage

Tao Shi et al.

Summary: This study successfully prepared a novel type of flexible and foldable composite films based on PI/PR hybrid aerogel and PCM, showing excellent mechanical properties and thermal regulation capability for infrared stealth and thermal camouflage applications.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Emulsion-Templated, Magnetic, Hydrophilic-Oleophobic Composites for Controlled Water Removal

Xiaomin Li et al.

Summary: In this study, we report the fabrication of magnetic, hydrophilic-oleophobic polyHIPE composites that can rapidly absorb water droplets and exhibit magnetic responsiveness. These composites can effectively remove water from oil-water mixtures and be fully collected.

LANGMUIR (2022)

Add to Collection

Article Thermodynamics

Polyimide/phosphorene hybrid aerogel-based composite phase change materials for high-efficient solar energy capture and photothermal conversion

Zhiheng Zheng et al.

Summary: This study developed a novel phase-change composite material based on polyimide/phosphorene hybrid aerogel and polyethylene glycol, which showed enhanced solar light absorption, high photothermal conversion efficiency, and good thermal stability. It provides a promising strategy for the design of high-performance composite PCM materials for efficient utilization of solar energy.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Polymer Science

Emulsion-templated, hydrophilic-oleophobic aerogels with flexibility, stretchability and recyclability

Shangyun Yang et al.

Summary: Hydrophilic-oleophobic aerogels with flexibility, stretchability, and recyclability have been fabricated through high internal phase emulsion templating. These aerogels can remove water from oil-water mixtures through selective absorption and show good reusability.

POLYMER (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Nano-enhanced organic form stable PCMs for medium temperature solar thermal energy harvesting: Recent progresses, challenges, and opportunities

John Paul et al.

Summary: Solar energy is a promising renewable energy source that can solve the current energy crisis. The use of Phase Change Materials (PCMs) in thermal energy storage systems is favored due to their high energy storage capacity, but their extensive usage is hindered by issues like leakage and poor thermal conductivity. However, these problems can be addressed by stabilizing the shape of PCMs with porous materials and dispersing highly conductive nanoparticles. This review article focuses on different synthesis methods for medium-temperature form stable composites and evaluates their thermal performance using mathematical evaluators. The review also summarizes the variations in thermophysical properties and the effects of porous support on supercooling, form stability, and thermal cycling. It details the potential applications of form stable composites and highlights the future directions for the development of high energy density composites.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Article Energy & Fuels

Thermally induced flexible phase change composites with enhanced thermal conductivity for solar thermal conversion and storage

Naici Bing et al.

Summary: Organic phase change materials (PCMs) composites with enhanced thermal conductivity and flexibility show great potential in solar thermal application, offering excellent stability and energy storage properties.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A highly flexible form-stable silicone-octadecane PCM composite for heat harvesting

Xiang Yun Debbie Soo et al.

Summary: This paper reports the preparation and characterization of a novel flexible form-stable PCM composite, which exhibits low leakage, high latent heat, and good thermal stability. The composite shows potential applications in temperature regulation, cooling, energy harvesting, and wearable devices.

MATERIALS TODAY ADVANCES (2022)

Add to Collection

Article Chemistry, Physical

Directional sweat transport of monolayered cotton-fabrics fabricated through femtosecond-laser induced hydrophilization for personal moisture and thermal management

Bing Xu et al.

Summary: A hydrophobic/superhydrophilic Janus cotton fabric was created using femtosecond laser-induced hydrophilization. The fabric can spontaneously transport sweat and lower body temperature in thermal environment. It also has lower wet skin adhesion and comparable water vapor transmission rate to traditional fabrics.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Emulsion-based, flexible and recyclable aerogel composites for latent heat storage

Tongqing Zhao et al.

Summary: This study reports the fabrication of flexible and recyclable aerogel composites using cellulose nanocrystal-stabilized, octadecane-encapsulated Pickering emulsions solidified by physical gelation. The composites exhibit controllable external shapes, high heat capacity, and good reusability, making them excellent candidates for latent heat storage.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Emulsion-templated, hydrophilic and underwater oleophobic PVA aerogels with enhanced mechanical property

Shangyun Yang et al.

Summary: In this paper, a method for fabricating hydrophilic-oleophobic porous materials with enhanced mechanical properties is reported. The resulting materials show flexibility, compression and stretchability in dry and wet states, exhibiting improved compressive and tensile performances. Furthermore, the materials exhibit hydrophilicity and underwater oleophobicity, making them suitable for removing water from oil-water mixtures and surfactant-stabilized, water-in-oil emulsions. Additionally, the materials are demonstrated to be effective for solar steam evaporation.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Engineering, Manufacturing

Close-cellar shape-stable phase change material monolith prepared by high internal phase Pickering emulsion polymerization

Boxin Li et al.

Summary: Monolithic shape-stable phase change material (SS-PCM) was prepared by polymerizing the continuous phase of Pickering high internal phase emulsion (Pickering-HIPE), which exhibited high phase change enthalpy and excellent shape stability even after thermal cycles. The SS-PCM monolith shows great prospects in the field of thermal storage and temperature regulation.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Materials Science, Composites

Dual-functional phase change composite based on copper plated cellulose aerogel

Lunyu Zhao et al.

Summary: Copper plated cellulose aerogel (CPCA) prepared by electroless deposition method can encapsulate polyethylene glycol (PEG) to form composite phase change materials (PCM), which exhibit enhanced thermal conductivity, high PCM loading capacity and extraordinary shape-stability. Moreover, the composite PCM also possesses excellent electromagnetic interference (EMI) shielding property.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible and Biocompatible Silk Fiber-Based Composite Phase Change Material for Personal Thermal Management

Chongwei Wang et al.

Summary: In this study, a flexible and biocompatible composite phase change material (PCM) for wearable personal thermal management was prepared using renewable natural silkworm cocoons and biocompatible capric acid. The results showed that the composite PCM exhibited excellent performance and stability under different environmental conditions.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Add to Collection

Article Materials Science, Composites

Shape-stable MXene/sodium alginate/carbon nanotubes hybrid phase change material composites for efficient solar energy conversion and storage

Xingyun Ye et al.

Summary: This study developed Ti3C2-introduced phase change materials (PCMs) composites using MXene/sodium alginate/carbon nanotubes (CNTs) hybrid aerogels as supporting materials and tetradecylamine (TDA) as the impregnated PCM. The utilization of MXene enhanced the light absorption performance of PCM composites, resulting in high photothermal energy conversion efficiency and thermal energy storage density. Additionally, the composites showed remarkable cycling stability, crystallinity stability, mechanical property, and thermal conductivity, indicating great potential application in solar energy conversion and storage.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Review Green & Sustainable Science & Technology

A comprehensive review of composite phase change material based thermal management system for lithium-ion batteries

Yanqi Zhao et al.

Summary: This review discusses the use of composite phase change material (CPCM) based battery thermal management system (BTMS) to improve battery thermal management (BTM) performance. The challenges associated with phase change material (PCM) are identified, and solutions are proposed, including incorporating PCM into porous materials and dispersing thermally conductive nanomaterials within the PCM. The review also highlights the advantages of hybrid BTMS over passive cooling and suggests future research focus on developing assembly methods and enhancing the manufacturing readiness of CPCM based BTMS.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

PolyHIPE Composites for Latent Heat Storage: Flexibility and Enhanced Light to Heat Conversion

Jintao Lu et al.

Summary: This study reports on the fabrication of phase-change material-encapsulated polyHIPE composites with good flexibility and enhanced light/electro to heat conversion. The composites exhibited high heat capacity, good encapsulation, and reusability, as well as enhanced light/electro to heat conversion efficiency even at low carbon nanotube content. These properties make the polyHIPE composites excellent candidates for latent heat storage and light/electro to heat conversion.

ACS APPLIED POLYMER MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Emulsion-templated, hydrophilic and underwater oleophobic PVA aerogels with enhanced mechanical property

Shangyun Yang et al.

Summary: The report introduces a method to fabricate hydrophilic and underwater oleophobic poly(vinyl alcohol) aerogels with enhanced mechanical property. These aerogels exhibit flexibility, compression, and stretchability, as well as anti-fouling property, making them suitable for removing water from oil-water mixtures. Additionally, these aerogels are also used as solar steam evaporators with high efficiency and continuous evaporation performance.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Engineering, Environmental

Self-healing inorganic hydrated salt gels for personal thermal management in the static and dynamic modes

Yingying Luo et al.

Summary: Thermal comfort is crucial for maintaining normal metabolism. This work introduces a novel concept of wearable personal thermal management using self-healing inorganic hydrated salt gels. The gels offer high thermal conductivity, energy storage capacity, and self-healing rate, while being cost-effective. This solution holds great potential for meeting the thermal comfort requirements of wearable devices.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Smart Nanocomposite Nonwoven Wearable Fabrics Embedding Phase Change Materials for Highly Efficient Energy Conversion- Storage and Use as a Stretchable Conductor

Zixuan Niu et al.

Summary: Flexible and intelligent electronics are in high demand for wearable devices and systems, and the development of smart conductive fabrics with high stretchability, thermal properties, washability, and rapid responsiveness to external stimuli is challenging but promising. These fabrics demonstrate tunable temperature and phase change enthalpy in response to various stimuli, while efficiently storing and converting energy. They also serve as stretchable conductors and have potential for integration in wearable systems and intelligent protective garments.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Hierarchical porous hollow carbon spheres derived from spirofluorene- and aniline-linked conjugated microporous polymer for phase change energy storage

Chunna Yan et al.

Summary: PCM encapsulated in HCSPs derived from SACMP shows a great potential for stable thermal energy storage, with high phase change enthalpy and good thermal cycling stability. The HCSP/ODA composites with 80% ODA content demonstrate excellent shape stability and thermal performance, making them promising for energy saving applications in greenhouses.

CARBON (2021)

Add to Collection

Article Thermodynamics

Energy retrofit of PCM-applied apartment buildings considering building orientation and height

Ji Hun Park et al.

Summary: This study analyzed the energy performance of apartment buildings using retrofit systems with phase change materials (PCMs) in relation to building orientation, height, and climate factors. The results showed that different building orientations and heights require different PCM application temperatures for energy savings, highlighting the need to consider variables such as building orientation, height, and climate factors for effective PCM application in apartment buildings.

ENERGY (2021)

Add to Collection

Article Chemistry, Applied

Lightweight, strong, and form-stable cellulose nanofibrils phase change aerogel with high latent heat

Mingyao Song et al.

Summary: By utilizing Pickering emulsion templating technique, a strong and form-stable CNF/PCM composite aerogel with a latent heat of 173.59 J.g(-1) was successfully fabricated. The composite aerogel shows good stability at 80 degrees C, relatively low thermal conductivity, and no leakage after multiple heating/cooling cycles.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Engineering, Environmental

Octodecane-cellulose nanofiber flexible composites for latent heat storage

Jintao Lu et al.

Summary: This study reports the fabrication of PCM-encapsulated, emulsion-templated monolithic composites with wide-temperature-range flexibility for latent heat storage. These composites exhibit controllable external shapes, high heat capacity, good reusability/stability, and mechanical robustness.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Flexible shape-stabilized phase change materials with passive radiative cooling capability for thermal management

Lu-Yao Yang et al.

Summary: The study fabricated flexible shape-stabilized phase change materials (PCMs) with excellent thermal management capability, showing great potential in practical applications for decreasing temperatures of electronic devices and buildings.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Phase change material based on polypyrrole/Fe3O4- functionalized hollow kapok fiber aerogel matrix for solar /magnetic- thermal energy conversion and storage

Zhang Tao et al.

Summary: This study successfully prepared high-performance thermal transfer enhanced composite phase change materials with high thermal storage density, excellent thermal conductivity, and outstanding thermal stability, which have great potential for commercial application.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Materials Science, Paper & Wood

Cellulose nanofiber/melanin hybrid aerogel supported phase change materials with improved photothermal conversion efficiency and superior energy storage density

Jiulong Chen et al.

Summary: Novel PCM composites (CMPCMs) with good structural stability, improved photothermal conversion efficiency, and superior energy storage density were successfully synthesized, showing great potential in the practical utilization and storage of solar energy.

CELLULOSE (2021)

Add to Collection

Article Chemistry, Physical

Solvothermal synthesis of porphyrin-ferrocenyl conjugated microporous polymer nanospheres for shape-stable phase change materials with improved latent heat and cyclability

Huimin Li et al.

Summary: Organic phase change materials (PCMs) are attracting attention for their non-toxicity, suitable working temperature range, and excellent thermal/chemical stability. To enhance the shape-stability of organic PCMs, nanosphere-shaped PFCMPs with high porosity were synthesized and encapsulated in 1-octadecanol to create a composite material with high latent heat, excellent reversibility, and long heat storage durability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Octodecane-cellulose nanofiber flexible composites for latent heat storage

Jintao Lu et al.

Summary: The study presents the fabrication of PCM-encapsulated, emulsion-templated monolithic composites with wide-temperature-range flexibility for latent heat storage. The composites show flexibility at different temperatures, high stability and heat capacity, making them excellent candidates for latent heat storage.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Challenges and solution technologies for the integration of variable renewable energy sources-a review

Simon R. Sinsel et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Engineering, Environmental

Shape-stabilized hydrated salt/paraffin composite phase change materials for advanced thermal energy storage and management

Chuanfei Shen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Synthesis and characterization of microencapsulated methyl laurate with polyurethane shell materials via interfacial polymerization in Pickering emulsions

Zhiqiang Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Add to Collection

Article Polymer Science

Nanofibrous, porous monoliths formed from gelating high internal phase emulsions using syndiotactic polystyrene

Haoguan Gui et al.

POLYMER (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Closed-cell, phase change material-encapsulated, emulsion-templated monoliths for latent heat storage: Flexibility and rapid preparation

Tao Zhang et al.

APPLIED MATERIALS TODAY (2020)

Add to Collection

Article Polymer Science

Amphiphobic polyHIPEs with pH-triggered transition to hydrophilicity-oleophobicity for the controlled removal of water from oil-water mixtures

Xiaomin Li et al.

POLYMER CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Facile synthesis of templated macrocellular nanocomposite scaffold via emulsifier-free HIPE-ROP

Meenal Agrawal et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Tuning the flexibility and thermal storage capacity of solid-solid phase change materials towards wearable applications

Jinming Shi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Polymer Science

Hydrophobic polyurethane polyHIPEs templated from mannitol within nonaqueous high internal phase emulsions for oil spill recovery

Tao Zhang et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2019)

Add to Collection

Article Polymer Science

Robust, highly porous hydrogels templated within emulsions stabilized using a reactive, crosslinking triblock copolymer

Tao Zhang et al.

POLYMER (2019)

Add to Collection

Article Polymer Science

Closed-cell, emulsion-templated hydrogels for latent heat storage applications

Haoguan Gui et al.

POLYMER CHEMISTRY (2018)

Add to Collection

Article Chemistry, Physical

Facile Synthesis of Nitrogen-Rich Porous Organic Polymers for Latent Heat Energy Storage

Jiahuan Li et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Polymer Science

Specially Treated Aramid Fiber Stabilized Gel-Emulsions: Preparation of Porous Polymeric Monoliths and Highly Efficient Removing of Airborne HCHO

Jianfei Liu et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2017)

Add to Collection

Article Polymer Science

Emulsion-templated polymers: Contemporary contemplations

Michael S. Silverstein

POLYMER (2017)

Add to Collection

Article Chemistry, Physical

Emulsion-templated, macroporous hydrogels for enhancing water efficiency in fighting fires

Tao Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Energy & Fuels

Novel microstructured polyol-polystyrene composites for seasonal heat storage

Salla Puupponen et al.

APPLIED ENERGY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Inflatable Elastomeric Macroporous Polymers Synthesized from Medium Internal Phase Emulsion Templates

Michael Tebboth et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Polymer Science

Surfactant-free CO2-in-water emulsion-templated poly (vinyl alcohol) (PVA) hydrogels

Wei Luo et al.

POLYMER (2015)

Add to Collection

Review Polymer Science

PolyHIPEs: Recent advances in emulsion-templated porous polymers

Michael S. Silverstein

PROGRESS IN POLYMER SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Encapsulated phase change materials stabilized by modified graphene oxide

Yi Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Polymer Science

One-Pot Synthesis of Elastomeric Monoliths Filled with Individually Encapsulated Liquid Droplets

Inna Gurevitch et al.

MACROMOLECULES (2012)

Add to Collection

Review Green & Sustainable Science & Technology

A review on effect of phase change material encapsulation on the thermal performance of a system

Pramod B. Salunkhe et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.