☆ 4.7 Article

Eco-Friendly Polyurethane Reactive Hot-Melt Adhesive Derived from Poly(& epsilon;-caprolactone-co-lactic acid) Diols

ACS APPLIED POLYMER MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Reactive polyurethane hot melt adhesives based on polycarbonate and sebacic acid-based polyester polyols

Li Sun et al.

Summary: Reactive polyurethane hot melt adhesives containing a blend of polyester and polycarbonate diols exhibit balanced performance, and increasing the molecular weight of polycarbonate diols can significantly improve their mechanical properties and shear strengths, making them more suitable for bonding on PC substrate.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Polymer Science

Dynamic cross-linked polyurethane hot-melt adhesive with high biomass content and high adhesive strength simultaneously

Lei Du et al.

Summary: In this study, a high-performance and self-healing bio-based polyurethane hot-melt adhesive (DPU) was successfully developed. The adhesive showed high lap shear strength and biomass content, along with excellent self-healing and repeatable adhesion properties. It also exhibited excellent resistance to low temperatures and solvents, making it a promising alternative to conventional PU-HMAs.

EUROPEAN POLYMER JOURNAL (2023)

Add to Collection

Article Polymer Science

Effect of PLA/TiO2/Lg filler competition and synergy on crystallization behavior, mechanics and functionality of composite foaming materials

Tong Song et al.

Summary: This study demonstrates a method for preparing high expansion ratio, high cell density PLA foams by combining titanium dioxide (TiO2) and lignin (Lg). TiO2 acts as a rigid core to generate heterogeneous nucleated crystals and increase the strength of the PLA matrix, while Lg functions as a polymer plasticizer with good dispersibility to improve the mobility of PLA molecular chains and reduce entanglement. The competition and synergy between the two nucleating agents were studied, and Lg exhibited a significant nucleation-promoting effect compared to TiO2 as a single nucleating agent. Additionally, the 1 wt% PLA/Lg composite foams prepared in this study showed excellent foaming properties.

POLYMER (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Biomechanical properties of a customizable TPU/PCL blended esophageal stent fabricated by 3D printing

Peng Yu et al.

Summary: In this study, a thermoplastic polyurethane (TPU)/Poly-epsilon-caprolactone (PCL) blended esophageal stent was developed using melt blending and 3D printing techniques. The stent can be personalized according to the esophageal geometry of the patient. The results show that the stent has good mechanical properties, nontoxicity, and has the potential for clinical personalized treatment of esophageal strictures.

MATERIALS TODAY COMMUNICATIONS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Triethoxysilane End-Functional Branched Waterborne Polyurethane Adhesives for Leather Substrates

Longfang Ren et al.

Summary: To improve the adhesion and water resistance of waterborne polyurethane adhesive, amino-terminated hyperbranched organosilicon (HPSi-NH2) was synthesized as the cross-linking agent to modify the polyurethane prepolymer. The modified adhesive showed enhanced properties, including decreased water absorption rate, increased water contact angle, improved tensile strength, and increased elongation at break. The HSiPU adhesive with different contents of HPSi-NH2 also exhibited improved bond strength for bonding substrates with different cohesion strengths.

ACS APPLIED POLYMER MATERIALS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Highly Adhesive and Tough Thermoplastic Polyurethanes Using a Furandicarboxamide Rigid Chain Extender with Noncovalent Interactions

Hao Wu et al.

Summary: In this study, a bio-based furandicarboxamide diol chain extender was designed and used to synthesize thermoplastic furandicarboxamide-based polyurethane (PUFD). The PUFD showed excellent elongation at break and breaking strength due to the multiple hydrogen-bonding motif provided by the furandicarboxamide group. The resultant PUFD-HMA exhibited ultrahigh adhesive strength on various substrates and could be easily rebonded with retained adhesion strength after repeated uses.

ACS APPLIED POLYMER MATERIALS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Miscibility, Morphology, and Crystallization Kinetics of Biodegradable Poly(ε-caprolactone)/Ascorbic Acid Blends

Mostafa Eesaee et al.

Summary: The addition of L-ascorbic acid (AA) impacted the crystallization development of PCL, resulting in different spherulitic sizes. Short-term hydrolytic degradation removed AA particles from the surface of PCL/AA blends, allowing for a porous structure of PCL with potential higher surface degradation rate.

ACS APPLIED POLYMER MATERIALS (2022)

Add to Collection

Article Polymer Science

Effect of the biobased polyols chemical structure on high performance thermoset polyurethane properties

O. Echeverria-Altuna et al.

Summary: The aim of this study was to investigate the effect of biobased polyols on the processing and properties of polyurethanes, and to establish suitable synthesis methods for structural applications. The experimental results demonstrated that the nature of the polyols had a significant influence on the performance and crosslink density of the composites.

POLYMER (2022)

Add to Collection

Article Polymer Science

Highly toughened poly(L-lactide) by poly(D-lactide)-containing crosslinked polyurethane shows excellent malleability, flexibility and shape memory property

Suyang Dai et al.

Summary: In this study, poly(L-lactide) (PLLA) was toughened by crosslinked polyurethane (CPU) through reactive blending. The resulting material exhibited significant increase in elongation at break, enhanced toughness, and shape memory capacity, showing great potential for applications in biodegradable green composites.

POLYMER (2022)

Add to Collection

Article Polymer Science

Study on Preparation and Performance of Reactive Polyurethane Hot Melt Adhesives Based on a Polycarbonate Diol and a Polyester Diol

Li Sun et al.

Summary: In this study, reactive polyurethane hot melt adhesives containing a mixture of poly 1,3-propylene sebacate diols (PPSe) and poly 1,6-hexanediol carbonate diols (PHC) were prepared to investigate their properties. The results showed that the relative content of PHC and PPSe affected the thermal stability, bond strength, and hydrolysis resistance of the adhesives.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Deep Eutectic Solvent-Extracted Lignin as an Efficient Additive for Entirely Biobased Polylactic Acid Composites

Saurabh Pawale et al.

Summary: This study reports the fabrication and characterization of entirely biobased composites made with polylactic acid (PLA) and deep eutectic solvent (DES)-extracted lignin. The results reveal that PLA/DES lignin biocomposites outperform their PLA/CAL counterparts in terms of morphology, thermal properties, and mechanical properties. SEM results show better lignin dispersion and smaller lignin agglomerates in PLA/DES lignin composites compared to PLA/CAL composites. TGA and DSC analysis reveal that DES lignin has a smaller effect on the thermal properties of PLA compared to CAL lignin. Tensile testing shows that PLA/DES lignin composites have significantly higher tensile strength and elongation at break than PLA/CAL composites.

ACS APPLIED POLYMER MATERIALS (2022)

Add to Collection

Article Engineering, Chemical

Bio-based polyurethane reactive hot-melt adhesives derived from isosorbide-based polyester polyols with different carbon chain lengths

Xueyi Pan et al.

Summary: Bio-based isosorbide, 1,3-propanediol, and dicarboxylic acids were used to synthesize isosorbide-based polyester polyols, which were then used to prepare polyurethane reactive hot-melt adhesives. The properties of the polyols and adhesives were studied, and the results showed that the bio-based PURHMAs exhibited good tensile properties and thermal resistance, indicating their potential application in the adhesive industry.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Chemistry, Applied

Impact of moisture curing conditions on the chemical structure and rheological and ultimate adhesion properties of polyurethane adhesives based on castor oil and cellulose acetate

Adrian Tenorio-Alfonso et al.

Summary: This study synthesized a moisture-curable bio-sourced polyurethane adhesive and investigated its rheological and adhesion properties during curing, finding significant impact of environmental humidity on the adhesive performance. Different behavior of the adhesive on wood and stainless steel under various relative humidity conditions was observed, indicating the importance of environmental factors in tuning the adhesion performance of bio-inspired polyurethanes.

PROGRESS IN ORGANIC COATINGS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Renewable UV-curable polyester methacrylate/cellulose nanocrystals composite resin for wood waterproof coating

Yuan Tian et al.

Summary: This study successfully reduced the viscosity of resin and improved the double bond conversion rate by synthesizing low-viscosity bio-based UV-curable polyester methacrylates. Furthermore, after blending the composite resin with cellulose nanocrystals, the water absorption rate significantly decreased.

NANOTECHNOLOGY (2021)

Add to Collection

Article Polymer Science

Study on novel rosin-based polyurethane reactive hot melt adhesive

Weidi Xie et al.

Summary: Utilizing a rosin-based chain extender in the preparation of polyurethane reactive hot melt adhesive (PURHMA) can enhance thermal and mechanical properties, as well as adhesive performance. Increasing the content of chain extender significantly improves the tensile strength, lap shear strength, and adhesion properties of PURHMA.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

Add to Collection

Article Chemistry, Applied

Preparation and properties of star-shaped UV-curable polyester methacrylate resins with Low viscosity derived from renewable resources

Zefei Yuan et al.

Summary: This study synthesized a series of low viscosity and colorless transparent UV-curable polyester methacrylate resins derived from renewable biologically fermented lactic acid, which showed excellent performance in preparing environmentally friendly UV coatings. Characterization and performance tests confirmed the high tensile strength, bending strength, bending modulus, glass transition temperature, pencil hardness, Shore D hardness, adhesion, and flexibility of the resins, making them promising candidates for sustainable development.

PROGRESS IN ORGANIC COATINGS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Blends of Poly(butylene glutarate) and Poly(lactic acid) with Enhanced Ductility and Composting Performance

Apisata Holt et al.

Summary: Blends of poly(lactide) with poly(butylene glutarate) were studied to enhance PLA brittleness and accelerate degradation under composting conditions. The addition of PBG decreased T-g and tensile strength but increased % elongation at break. PLA/PBG blends showed higher ductility compared to PLA blends with poly(butylene succinate). Compatibility of PBG in a PLA matrix depended on concentration, with phase separation above 3 wt %.

ACS APPLIED POLYMER MATERIALS (2021)

Add to Collection

Article Polymer Science

Effect of bio-based components on the chemical structure, thermal stability and mechanical properties of green thermoplastic polyurethane elastomers

Paulina Parcheta et al.

EUROPEAN POLYMER JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

CO2-based poly (propylene carbonate) with various carbonate linkage content for reactive hot-melt polyurethane adhesives

Zenghe Liu et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

Add to Collection

Article Biochemistry & Molecular Biology

High-value utilization of hydroxymethylated lignin in polyurethane adhesives

Yinchen Chen et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Engineering, Multidisciplinary

Synthesis and characterization of alkoxy silane modified polyurethane wood adhesive based on epoxidized soybean oil polyester polyol

F. Dodangeh et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Chemistry, Applied

Synthesis and properties of UV-curable polyester acrylate resins from biodegradable poly(L-lactide) and poly(ε-caprolactone)

Jiao Wang et al.

REACTIVE & FUNCTIONAL POLYMERS (2020)

Add to Collection

Article Polymer Science

Synthesis and Properties of Moisture-Cured Reactive Polyurethane Containing Castor Oil and Oxime Compounds

Zheng-Ying Wu

POLYMERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Monocomponent Non-isocyanate Polyurethane Adhesives Based on a Sol-Gel Process

Alvaro Gomez-Lopez et al.

ACS APPLIED POLYMER MATERIALS (2020)

Add to Collection

Article Materials Science, Paper & Wood

Preparations and Properties of Polyurethane Adhesives Modified by Corn Straw Lignin

Nan Sun et al.

BIORESOURCES (2020)

Add to Collection

Article Agricultural Engineering

Bio-polyols synthesized from bio-based 1,3-propanediol and applications on polyurethane reactive hot melt adhesives

Mengmeng Ruan et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Biobased Polyurethane, Epoxy Resin, and Polyolefin Wax Composite Coating for Controlled-Release Fertilizer

Hongyu Tian et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Engineering, Chemical

Cure and performance of castor oil polyurethane adhesive

Nuno Gama et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Strong, detachable, and self-healing dynamic crosslinked hot melt polyurethane adhesive

Shuliang Wang et al.

MATERIALS CHEMISTRY FRONTIERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Green Toughness Modifier from Downstream Corn Oil in Improving Poly(lactic acid) Performance

Suman Thakur et al.

ACS APPLIED POLYMER MATERIALS (2019)

Add to Collection

Article Agricultural Engineering

Structure-property relationships in solvent free adhesives derived from castor oil

Harshal D. Santan et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

Add to Collection

Article Engineering, Chemical

Preparation and characterization of high initial bonding strength reactive hot melt polyurethane adhesive derived from phthalate polyester polyols

Qiming Yan et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Polymer Science

PPC-based reactive hot melt polyurethane adhesive (RHMPA)-Efficient glues for multiple types of substrates

Zeng-He Liu et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Poly(Lactic Acid) Blends with Poly(Trimethylene Carbonate) as Biodegradable Medical Adhesive Material

Shuang Zhang et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)

Add to Collection

Review Pharmacology & Pharmacy

PLA composites: From production to properties

Marius Murariu et al.

ADVANCED DRUG DELIVERY REVIEWS (2016)

Add to Collection

Article Agricultural Engineering

Synthesis and characterization of Jatropha (Jatropha curcas L.) oil-based polyurethane wood adhesive

Min Min Aung et al.

INDUSTRIAL CROPS AND PRODUCTS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Crystallization behavior of diblock copolymers based on PCL and PLLA biopolymers

Ivan Navarro-Baena et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2014)

Add to Collection

Article Polymer Science

Study of the synthesis and bonding properties of reactive hot-melt polyurethane adhesive

Qiheng Tang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection

Review Chemistry, Applied

Microstructure and properties of poly(urethane-siloxane)s based on hyperbranched polyester of the fourth pseudo generation

Marija V. Pergal et al.

PROGRESS IN ORGANIC COATINGS (2013)

Add to Collection

Article Polymer Science

Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA-b-PCL Diblock Copolymers

Reina Veronica Castillo et al.

MACROMOLECULES (2010)

Add to Collection

Article Polymer Science

Comparison of crystallization behaviors of poly(ε-caprolactone) in confined environment with that in bulk

Tongfei Wu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Add to Collection

Article Polymer Science

Temperature-modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt-crystallized poly(L-lactic acid)

Yeong-Tarng Shieh et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.